D-Link Router / Ports Forwarding Does Not Work
Oct 23, 2012
I Seem to be having trouble forwarding my ports, My router model is a D-Link DIR-615. (If needed by PC Specs are down below) When I go into my router and i forward the ports, the forwarding doesn't work, Here is what I know:
- Computer IP Is the correct IP that the port is being forwarded too
- Windows Firewall is Off
- Restarting the Router/Computer Multiple Times
- The router says the ports are forwarded
- I have forwarded the ports to a laptop of mine and that seemed to work
- I tested the ports on this site Open Port Check Tool - Test Port Forwarding on Your Router
- That site told me that the forwarding to my laptop worked, but not to my desktop
View 9 Replies
ADVERTISEMENT
Nov 30, 2012
For the past 3 days Ive been trying to open up ports in my router (Siemens sx763) with no luck. Ive done all the port forwarding correctly but when i check the port from a website it say my port is blocked. I use a wireless connection. I think ive done my other router/connections/ip settings wrong but im not sure what it is.
MiniToolBox by Farbar Version: 25-11-2012
Ran by Marko (administrator) on 30-11-2012 at 15:26:27
Running from "D:\Internet"
Windows 7 Home Premium Service Pack 1 (X64)
[code]...
View 1 Replies
View Related
Aug 9, 2011
I have a Linksys WRT160N v2 and i play a lot of games, and enjoy hosting games.however there are too many ports to forward. I was wondering that if i turned off my routers firewall would this eliminate me having to port forward? and if i could do that how would i. I know how to access my router so you can give instructions form that point of if you would like
View 9 Replies
View Related
Oct 28, 2011
I am connecting to my office computer from home using remote desktop connection.
My office computer is in a network under router. So I forwarded a port 3389 to my computer's internal ip address. Now I want to connect to another computer at my office from home. I tried forwarding the port 3990. But I was not able to access using remote desktop connect.
What should I do to access the second computer. Will 3390, 3391 ... will not work?
View 7 Replies
View Related
Jul 15, 2012
I need help port forwarding my minecraft server via wifi. I have all permisions to setup but after all the threads and programs I have tried, nothing works. I get exception Failed to Bind to port perhaps another server is already running on this port.
View 1 Replies
View Related
Apr 21, 2009
Any solution to this problem.
I have for example a few machines up and running on a LAN (might be VM's but that shouldn't be an issue).
Say I have five with addresses 192.168.2.2 ==> 192.168.2.6
I might want to RDP to any of these from behind a router.
Using something like No-IP (No-IP - Dynamic DNS, Static DNS for Your Dynamic IP) I can get a an "Internet acessible" domain so I don't need to know the actual IP address that the Internet sees my router.
As I'm behind a router having Multiple domains won't help either as to the external Internet my router is seen as a single IP address.
However the router will only port forward to a single IP address on my LAN.
So if I need to RDP to any other machine on my LAN other than the default one presumably I could only do this by using a different default port for RDP for each of the machines on the LAN. OK not pretty but "Do-able".
Now we get to the real hassle -- If I did this then I'd need a different version of RDP on the CLIENT computer -- not possible if I'm using a work laptop .
Any solutions . I'm totally flumixed by this one.
View 4 Replies
View Related
Aug 9, 2011
A few days ago I installed a USB 3.0 card (to be precise, this one: 2-Port USB 3.0 SuperSpeed PCI-E Controller Card - Free Shipping - DealExtreme). It uses the very common NEC PD720200 USB 3.0 controller. I installed the required drivers for Windows 7, and the card worked fine for the first day or so. but not since. Whenever I plug in a USB 3.0 external hard drive, I get a false "This device can perform faster..." message, as if I had plugged the drive in a USB 2.0 port.
The external drive I am using is a Western Digital MyBook Essential 1130. It is definitely a USB 3.0 drive, and came with the required USB 3.0 cable. While the USB 3.0 card was working, I got full-speed transfers to the limit of the hard drive's ability, about 90-100 MB/s. Now I can only get USB 2.0 speeds (33-34 MB/s). Windows insists I have the drive plugged into a USB 2.0 port even though it is plugged directly into the USB 3.0 card.
Things I tried so far: -rebooting and complete power cycle. No difference. -plugging the drive into one port or the other. Also no difference. -Looked in Device manager.The controller is recognized as a USB 3.0 device is using the proper NEC drivers.
Other info that may be important:
-No overclocking settings in use.
-I made sure the cable was plugged in all the way. It's in as far as it can go, but the ports will still only act like USB 2.0 ports.
I might as well throw the card away if it is only going to act as a USB 2.0 device.
View 4 Replies
View Related
May 6, 2012
So, i've been hosting games for a while but i don't know what happened, after i try to port forward router ports they just won't open :O. Yeh, as i go to Open Port Check Tool it says ''Error: I could not see your service on 62.**.***.*** on port (*****)Reason: Connection timed out''?
View 2 Replies
View Related
Jun 12, 2011
I have D-Link router 2650U, and I'd like to use QoS on my router to get the highest priority for internet, for gaming, surfing or w/e.I had some issues configure the parameters so help me please, pictures :As u see I've enabled the QoS I've enabled here QoS too, though I don't know what those options and DSCP means and if I even need it.. Here I've set its priority This how it looks after I've done making the 'QoS' for my pc/ports, not sure if its good. This is the window where I need help insert the right details to give the priority to my PC, the ports 7700~7800(range) are the ports for the game I play GunZ I found out those ports through Port Forward website. I just want to know if the QoS is right, or how can I make my whole PC with the highest priority and not just ports. Will disabling items help/harm my internet? And putting it in such order is better? or give the web client network higher priority?And also disabling all those items?
View 7 Replies
View Related
Dec 1, 2009
Can anybody give me D-Link DI-604 router driver.
I found one here: di 604 driver (D Link Systems) 7, Vista, XP, download
but i can`t create account to download it...
View 0 Replies
View Related
May 17, 2011
I can't seem to portforward on the new D-Link routers? I got my router this year, so it's one of the new black ones that stand up? It has all of the wifi info on the side of the router. Anyway, I'm trying to portforward, followed a couple of guides but when I go on 'canyouseeme' it says it's not open? Is there any video tutorials for portforwarding with this router because I'm fed up now.
View 2 Replies
View Related
Oct 28, 2011
there flash lights on the d-link 3
View 2 Replies
View Related
Nov 9, 2012
i would ask the steps for setup a passowrd in wireless router d-link di-624
View 2 Replies
View Related
Nov 2, 2012
I have a Lenovo, Windows 7 Home premium 32bit. McAfee controlling my firewall. Unable to connect to internet. Connects to my wireless network. Timewarner has given up since my other HP xp computer works. Router has problems but works OK with my HP and vonage devices.
The router is D-Link WBR-1510. finding if this router is compatible to Win 7?
How do I "blow out the NIC"? How do I identify devices from drivers to uninstall?
View 4 Replies
View Related
May 11, 2012
I am having a hard time configuring my Access point. I have a DSL Router connected to our telephone line and it works fine wirelessly, Yesterday I purchased TP LINK Router to configure as Access Point to extend wireless signal up to the second floor. Now, I am wondering, should I do some re-configuration on my DSL Router before configuring my TP Link Router? Guys, Please share your thoughts and if you have knowledge on how to configure my 2nd Router to my WifiNOTE: I followed the user guide manual that came with my TP LINK router but it is no USE. I just need to know if should I reconfigure my 1st Router in order to communicate with my 2nd Router.
View 4 Replies
View Related
Jun 4, 2011
I purchased a new laptop with win 7 but cannot connect to my old router d-link wbr 1310.
View 1 Replies
View Related
Sep 28, 2011
So I installed some weird file and it like disabled ALL of my USB ports, hwo can I get them to work again?! Both my keyboard and mouse are USB and I don't have any regular ones, any way I can fix this through my 2nd partition using WinXP? im using the Win XP partition to ask this right now, my Win7 partition seems to run fine like when it happened I thought it froze but it didn't because the wifi signal went off from my USB wireless adapter and my mouse+keyboard adapter both light off as well as my DVC 80 capture device. The file I ran was 'libusb-win32-filter-bin-0.1.12.2.exe' from a package I downloaded in a zip called 'iHackintosh iRecovery Package for Windows & Mac' and I REALLY DONT want to restart my computer
View 1 Replies
View Related
Jul 22, 2011
I use IE, and hotmail.When I get noticed from seven forum in my mail, I clicked a link to thread, but that does not work.
View 5 Replies
View Related
Apr 26, 2011
When i try to connect my wireless mouse to my laptop it dosnt respond at all. It says it is connected, however nothing works. Ive tried using a Flashdrive and it works fine. Ive also tried with 3 different mice with the same result. Im guessing it has to do with a driver i have recently downloaded from windows update, however, i have restored my computer as far back as i can go, and it still dosnt work.
View 2 Replies
View Related
Oct 31, 2009
Installed Windows 7--->USB ports do not work.
1. Tried uninstalling/reinstalling them...no good
2. Tried downloading from Intels website--->Got error message saying my computer does not meet minimum specs for program to run, which is BS because my computer is very good and is only 1 year old.
View 0 Replies
View Related
Nov 10, 2009
I'm not sure if any other specs needed to solve this problem.
I upgraded from vista 32bit to windows seven 32bit a few days ago, ever sense i have upgraded i have never been able to use any usb ports. i have went into the device manager and uninstalled and reinstalled the usb port drivers, they will start to work for about 30 seconds then will fail.
This is the error in the properties under usb port:
Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)
I have installed my motherboards new drivers and bios for windows 7. also have updated windows and installed all major updates. I have been working on fixing this error for days now and i have had no success.
View 3 Replies
View Related
Oct 25, 2011
USB 2.0 ports don't work after upgrade from xp to win 7.
View 7 Replies
View Related
Nov 9, 2012
I have been having trouble with my usb ports not reading my flash drives. I just did a little test and was shocked to find that my usb ports will run printer and not flash drives? I tried to update the drivers but it says they are up to date. What can cause this? It is 5usb ports 2 in back and three across the front. My system is a Dell Studio XPS Desktop 435T/9000 64 bit windows 7.
View 3 Replies
View Related
Jan 23, 2011
I was away on a trip, so I let my parents use my laptop while I was gone. They say it updated, something, but afterwards froze, so they turned it off. Turns out it was several different updates, including a BIOS update. Everything else works fine except for my usb ports which no longer detect anything connected to them. The device manager gives me little yellow warning bubbles by Standard Enhanced PCI to USB Host Controller and Standard OpenHCD USB Host Controller. It says code 19 error and the config info in the registry is missing or damaged. I have tried updating the drivers, uninstalling and letting it re-install, but it hasn't worked. I'm running on a HP Pavilion dv6-3013cl Entertainment notebook, Windows 7 (64bit).
View 14 Replies
View Related
Aug 5, 2012
I was rebuilding my computer bit by bit after my old one died on me. I recently purchased a motherboard/cpu and I used an old harddrive with windows xp on it and my old video card from my previous pc.Everything worked fine, all usb ports were up and running, monitor worked great. Than I went to install Windows 7 on my computer from a usb thumb-drive. Everything went smoothly until I got the the first restart. When the computer turned on again, all fans were turning, hard drive was spinning, and led lights turned on but my monitor went black saying no connection, and none of my usb ports work (no lights on my keyboard or mouse).
My computer specs are:
Motherboard: AsRock 970 Extreme3
CPU: AMD-FX 4100
Graphic Card: Zotac GeForce 9500GT
Ram: 2, 4GB (8GB total) Corsair Vengeance DDR3
HDD: Seagate Barracuda 7200.7
Monitor: Asus VH198T
View 2 Replies
View Related
Oct 19, 2012
My problem began when someday i had issue in my windows which was usb was not recognized as i tried putting 3 usbs but all of them didn't work and i have 2 usb ports in my laptop which is dell xps 15z so i don't think it is a hardware issue
My problem continued and i searched and searched the internet for solutions but no one really worked so i decided to format the windows and installing new clean windows 7 one, and i did so and after installation i had too many more problems knowing that i installed all the required drivers needed for the laptop and checked them with driver genius, now any usb i plug in isn't even sensed by the lap or self installed like the usb ports have no drivers or anything.I tried the wireless mouse which isn't sensed on another laptop and it installed and worked instantly, so where is driver software installation which should install the mouse automatic?
View 2 Replies
View Related
Nov 26, 2012
It seems all the usb ports do not work on my laptop. My usb mouse doesn't work, and my other usb devices do not work either. All the usb drivers are installed properly as detected.
View 2 Replies
View Related
Nov 11, 2009
will the repair install fix system links that do not worK? cursor choices show up in Cursors file in Windows. Problem is after installing windows 7 Professional the link to the mouse pointers does not work and if you go to mouse properties they are not there just the mouse driver details. Any ideas on how to fix this?
I did the RC of windows 7 to see if I would like it...the mouse options was not available in the RC thought it would get fixed in final release. As instructed when received my upgrade after final release went back to Vista home premium, upgraded to 7 home premium (had to buy it, had ordered and recieved 7 pro) then upgraded to the 7 pro. still no mouse pointer options to change the pointer.
The pointers are in the Cursors folder in Window, but when I click on 'Change Mouse pointers' nothing happens. In the control panel when I click on the mouse icon nothing happens. I am using a usb mouse on my laptop but this feature does not work with the touchpad either. Worked just fine in vista, any suggestions
View 9 Replies
View Related
Sep 24, 2012
How can I get the Windows 7 Control Panel Backup & Restore link to work? When I click on it it does nothing
View 3 Replies
View Related
Aug 20, 2012
I ask because I have a 3548 kbps downstream DLS connection. I can download at 350 mbps which is full speed.My wife connected to the other port on the same router can also download at 350 mbps at the same time. How can this be if the limit on the phone wire it capped at 3548 kbps? Seems if we both try to download at the same time, we each should not get faster speeds than 175. How can a router do this?If a router can do that.. and we know it can.. then why can't I get 700 mbps downloads when only I am downloading? Why can't I double my speed just like my speed and my wife's speed amounts to doubling the speed anyway?
View 3 Replies
View Related
Mar 28, 2011
I just bought a brand new Dell Inspiron 15r.. (was using an HP mini before Dell, had same issue) It has Windows 7..The router is a Belkin G Model F5F7234-4... Co worker can connect, this router used to be in his home so he configured it then and just brought it to work and didnt have to do anything but plug and play.. then i came along and couldnt connect..Im currently using the internet on my Dell connected by my EVO with PDANET..When i came in with my Dell i automatically tried connecting with out any set up, usually works perfect anywhere i go.. but keeps showing unidentified network and showing it as a public access... iv googled and read everything from disable mcafee and try connecting with the ethernet cable... before i had a cable i tried running belkin setup assistant cd and it would say no connection to router.. i finally got ahold of an extra cable today and tried that in to set it up with the cd while wired, at first it showed on the laptop it was wired and i put in the belkin setup assistant cd and it would just keep looking for the router,(now just showed wired on router but not on computer) then tried manual set up where IE popped up with http://192.168.2.1/ in the address bar, but wouldnt connect.. tried to diagnose everything every time.. it keeps saying can not connect via net work adapter or LAN does not have valid ip address... iv reset and or disabled then enabled everything.. i have all passwords and pins to the router.. i would keep using my pdanet but trial is up and its gonna cut off on me soon like last week, it keeps messing with me.. but why pay for it or use it when i have a perfectly good network to connect to at work!
View 2 Replies
View Related
