External Monitor Wont Work After Windows Boots Up?
Jan 24, 2013
I have a Lenovo u400 laptop and im trying to connect my external samsung syncmaster bx2335 to it through an hdmi/dvi adapter.When it first boots up, the monitor works displaying the lenovo logo but when it gets past the windows logo and onto the log in screen, it switches back to the laptop and the monitor wont respond anymore.I have uninstalled the video drivers and that make the monitor work when windows was on, but once i tried to reinstall the drivers the problem came back.
View 8 Replies
ADVERTISEMENT
Dec 20, 2011
I have a virus and trying to get my laptop to work in safe mode, to fix it. But my Laptop monitor is broken so I use an external monitor but now I can't get that to work.
View 4 Replies
View Related
Dec 25, 2012
I have an Acer Aspire 5741-5979 using a graphics card of Intel (R) graphics. This is a new issue I have had recently. I used to connect an external monitor to my laptop, and it worked fine. The issue is that the laptop still detects the external monitor but the external monitor does not receive a signal when I plug it in the VGA (blue trapezoid connector) have played around with the display options an exhausting amount of times and nothing works there. I tried what worked before (extending the display) and trying to clone it. I thought it might be a driver issue and I reinstalled the driver, but this didn't seem to help either. I have used many monitors when it worked, and also tried different monitors after it stopped working to no avail
View 3 Replies
View Related
Sep 25, 2012
When I start my computer with drivers installed my monitor loses the signal when I should be receiving a log in screen. I can boot up fine in safemode and/or if I'm using Standard VGA Graphics Adapter. To my knowledge I do not have an onboard graphics card as there is nothing to plug an avi or vga cord into aside from my graphics card. I should also mention I tried using an NVIDIA GeForce 8500 GT and experienced the same problem.
View 5 Replies
View Related
Nov 25, 2011
I"m new to computers, so I will try to be clear as possible.But I have a question about my pc.I turned on my pc and i heard the fans, but the sound was too long and went from low to high. And stops.Then my monitor did turn on, I saw a little message.Then all of the sudden it goes to sleep mode (orange button).After that my system cabinet has that same sound when I turned it on. And stops.
View 9 Replies
View Related
Mar 1, 2011
am trying to install windows on a laptop with broken screen it will not display on crt monitor when running setup.how would i change this. trying to either install vista or 7 hp dv9000 entertainment series
View 5 Replies
View Related
Nov 18, 2012
it does not show on computer when plugged in it runs on usb 2.0 my windows 7 is 32 bit .
View 2 Replies
View Related
Feb 18, 2011
I have a pc running windows 7 pro 64 bit, I received a update from windows and when the computer rebooted my monitor and key board will not work. I don't know what to do now, I can't even get it to boot in safe mode.
View 3 Replies
View Related
Aug 5, 2012
I was rebuilding my computer bit by bit after my old one died on me. I recently purchased a motherboard/cpu and I used an old harddrive with windows xp on it and my old video card from my previous pc.Everything worked fine, all usb ports were up and running, monitor worked great. Than I went to install Windows 7 on my computer from a usb thumb-drive. Everything went smoothly until I got the the first restart. When the computer turned on again, all fans were turning, hard drive was spinning, and led lights turned on but my monitor went black saying no connection, and none of my usb ports work (no lights on my keyboard or mouse).
My computer specs are:
Motherboard: AsRock 970 Extreme3
CPU: AMD-FX 4100
Graphic Card: Zotac GeForce 9500GT
Ram: 2, 4GB (8GB total) Corsair Vengeance DDR3
HDD: Seagate Barracuda 7200.7
Monitor: Asus VH198T
View 2 Replies
View Related
Sep 2, 2011
I have a seagate 2 TB external HDD. It has 1 FAT32 partition. Everything works as expected in Windows Vista/7 and even in Ubuntu.When connecting the external HDD to any XP machine (tested 3 computers with XP), the device will not show up under My Computer.It is visible in Device Manager.Under Disk Management, the drive shows up without any labelling and has improper file system and partitioning.It's as though the partition table is messed up, however, the drive works perfectly on any Vista/Windows 7/Linux pc. [code] Not only is the capacity incorrect, but darn well everything else about the drive shows up incorrect under Disk Management.This happens with all XP PCs. Also, I ran a SFC /SCANNOW with one XP machine in the event the FAT32 drivers or DLLs were corrupted and no resolve.I reinstalled XP on the same machine and the results were identical.
View 3 Replies
View Related
Jan 1, 2013
I have a Dell laptop & have been trying to use it on a external monitor but its not working. It has worked in the past but now its saying cable not connected on the external screen. FN f8 isnt working for it anymore. Any ideas how to get it working again ?
View 3 Replies
View Related
Feb 8, 2011
i have a samsung syncmaster 915N that i am trying to hook up to one of my laptops and am having no luck. i have two hp's one is a pavillion dv4, the other is a dv6000. i tried messing with every setting i could find on both computers and can't get anything but a black screen to show up on the samsung monitor. it came from a desktop that crashed so i know it works. i tried the function key that looks like the monitor as well.
View 3 Replies
View Related
Dec 9, 2009
I have a Thinkpad T61 and just installed Win 7 Professional with an external monitor.
After loading Win 7 i needed to select connect to projector to get my external monitor working. Windows 7 is displayed on the entire screen and all text is nice and crips. No distortion whatsoever.
The problem is the Win 7 Intel 965 chipset family patch. After installing it i loose about 1/2 inch on the right hand side of the monitor. Adjusting the monitor (it has an automatic focus and alignment adjustment function) does not resolve it. I still see that 1/2 inch black border there.
But worse, any text (word document, web-pages, txt files) goes from crips to blurry every 2 inches and the monitor adjustment can't fix it. Removing the Intel chipset patch and rebooting the PC shows Win 7 from frame to frame again (no more black border on the right) and the text is all crisp again.
The monitor driver version that was loaded with Win 7 is 8.15.10.1749. I downloaded the latest driver from Intel 8.15.10.1930 but even with that driver i get the black frame and text distortion back.
Anybody has experienced this before and knows how to fix it? Not using the Intel patch forces me to logon on the notebook (which is in a cupboard) then select connect to a projector again to get Win 7 onto the external monitor. And unfortunately this setting is not retained.
View 3 Replies
View Related
Jul 8, 2009
Im running 7 on my laptop, and im trying to get it to output only to my external monitor when the lid is closed. I can get it to extend my desktop, but when i close the lid, it turns off the external monitor. I have set Windows 7 to do nothing when lid is closed. Is there anyone else with this problem?
I have an Dell Inspiron 1525, with Intel x3100 integrated graphics, if that helps.
View 4 Replies
View Related
Aug 11, 2009
I have always used an external monitor when using windows vista and now that i have upgraded to windows 7 when i plug in my external monitor it flashes on and off. I have changed the refresh rate on the monitor and all it does is change how fast the external monitor flashes. Also, I had this problem when using windows vista and I changed a setting in windows task scheduler and it fixed it. Tried doing the same thing in 7 and the problem is still there. In addition, I tried using a different monitor cable and the problem is still there.
View 5 Replies
View Related
Jan 15, 2013
I'd ideally like to rig it up to an HDMI adapter, but VGA would be fine as well.
View 2 Replies
View Related
Sep 29, 2010
I recently installed Windows 7 - 64 bit on my Dell Precision M4400. Now the computer does not recognize any external monitors. It does not detect the external monitor as connected. I tried FunctionF8, and also tried to find if there were missing or outdated drivers and have had no luck.
View 9 Replies
View Related
Jun 5, 2011
can I make an external monitor the primary with a dell lap top inspron 1501
View 1 Replies
View Related
Sep 12, 2012
I can't seen to be able to utilize my HP external monitor with my Sony laptop?
View 4 Replies
View Related
Oct 30, 2009
A friend just bought a new HP laptop running Windows 7 Home. They want to connect their old Gateway monitor to the laptop to use as a dual-screen setup. They shut down the system connected the monitor then turned on the monitor and booted the system. When the desktop displays on the laptop it also comes up on the external monitor for just a second and then the monitor goes black. They have also tried connecting the monitor while the laptop was already up and running with the same results. The monitor had been working fine with their old Windows XP desktop system.
View 6 Replies
View Related
Aug 30, 2012
I have a laptop which is connected to an external monitor through a HDMI cable.Sometimes when I'm using the external monitor for watching a movie or playing a game I close the laptop lid. If I need to type for a second, when I open the laptop it automatically changes from the external display to the laptop display. This sometimes crashes certain applications and games. I would much prefer if it didn't automatically change my current screen when I plugged in a HDMI cable or when I opened the laptop lid. Is this possible?
View 3 Replies
View Related
Dec 28, 2011
I 'm looking for easiest possibe way to switch between external monitor/external+internal extended view laptop LCD. Most likely this could be done by Fn+F8 which cycles among internal/external/internal+external (cloned). What I'd need is to cycle between External output only/internal+external (extended) and optionally internal only. So int+ext in cloned mode has no use for me. I know that it can be switched by Win+P which gives to choice whether cloned or extended view, but I'd like to have this changed in the cycle by Fn+F8 from cloned to extened, is that possible?
View 2 Replies
View Related
Oct 7, 2009
I recently got a 24" 1920 x 1080 external LCD monitor for my laptop. It's awesome. I've been using laptops only for many years and now I'm very sorry I waited so long before getting one. But, on to my issue:
I want to only use the external monitor and keep the laptop screen turned off. The problem is that when I resume from sleep sometimes, but not always, the laptop display comes back on showing only the desktop wallpaper. So I then have to hit the windows key plus "p" (for projector) and select projector to get the laptop display turned off again.
I know how to select the external monitor in Windows 7. Basically, one goes to screen resolution from the desktop right click context menu and make the proper selection under multiple monitors (see screenshot below).
But windows 7 seems to forget this setting sometimes and it's a mild annoyance to have to check the laptop monitor and if it's on, hit the windows key plus "p" each time (or almost each time).
So I'm wondering if there's some way to force windows 7 to remember to use only the external monitor and keep the laptop monitor off until I tell it otherwise? I suppose this issue is likely due to some bug in one of my drivers but I am using all the latest drivers.
View 3 Replies
View Related
Mar 8, 2009
About 3 seconds after I plug in an external monitor (VGA-out), my netbook LCD screen goes black (backlight still on) and the system locks up. No display on external monitor. I'm pretty sure it's a BSoD (just not visible since it's a display issue). If I plug in the monitor and then boot, windows will go through the loading screen and just before showing the welcome screen, it will reboot (and go through a loop).
What I have tried:
-Removing ACPI driver (only available ACPI driver is designed for XPDM).
-Installing the monitor driver before plugging it in.
-Using safe mode (safe mode will only mirror the display just like it does in BIOS).
-A different monitor.
-Win+P and selecting option just before plugging in.
I'm fairly sure the issue is Intel driver related. I could uninstall the current driver and install Intels XPDM driver and give that a try, but I would lose Aero and there are stability and compatibility issues with the old XP drivers on many 3D applications. Anyone have any suggestions?
View 3 Replies
View Related
Apr 4, 2011
How do I enable the external monitor port on the T60? Fn+F7 does not work.
View 3 Replies
View Related
Dec 11, 2012
Up to the other day my external monitor worked no problem, the laptop sees the monitor but on my external monitor it just keep coming up "no input signal" and going into stand by and I have tried other monitors and other vga leads its a dell latitude e5510,
View 1 Replies
View Related
Jul 27, 2010
I am dual booting windows 7 and ubuntu 10.04 on a hp dv4 1162 tx laptop and have it plugged into a Benq monitor. That is the only monitor that i use and don't do any dual monitor things.
My dilemma is that this monitor does not show any of the boot screens and that means that i cannot choose which os to boot into. How can i make it show them.
View 9 Replies
View Related
Jun 19, 2011
How do I stop the screen resolution from reverting back to 800 x 600 when switching to external monitor? Intel(R) Graphics Media Accelerator Driver for Mobile thinks the optimal resolution is 800 x 600 when it's actually 1024 x 768. How do I make it see 1024 x 768 as the optimal resolution and make it the default for the external monitor?
View 1 Replies
View Related
Nov 2, 2009
Well, running Windows 7 ultimate on a Dell xps m1330 laptop. Everything looks good, but at work I am connected to a matrox triple-head-to-go device which is connected to (3) 22' monitors (3840x1280 resolution). Now when I connected it, ran the nvidia app, it found it and worked great.
Problem is I get home, no external connected, so running off the laptop with the basic resolution, I am trying to start apps (firefox, stickies, etc.) and I guess they were in other spots at work as I don't see them.
I forced a close on FF, then re-started, rt clicking and maximizing which worked, but then other apps like stickies don't have that option. An alt-tab shows it running in the lower right (see screenshot), but there is absolutely no way of getting to the app! I did close the app completely and restarted, but it does restart in a location not on the screen.
View 1 Replies
View Related
Jan 2, 2010
I got a new LCD tv today and wanted to use it as a monitor as well.
I've connected it up as my main monitor so when its connected via VGA my laptop goes blank and the screen is on the tv.
I was messing with the resolutions to try get the right one and now it says its in an unsupported resolution.
The problem is, I cant change it coz the screen wont show on the tv and its not showing on laptop because i set it not too.
When I unplug the connection I cant change the settings for the external so Im stuck at what to do.
View 9 Replies
View Related
Jan 2, 2013
I recently got a new monitor (samsung sync master s27b350), and when I connect it to my laptop (alienware m11x r2) it works perfectly fine through either vga or hdmi. Until I close the laptop's lid. Then the image on the external monitor either flickers or goes completely black (I have settings to 'do nothing' on lid close). All my drivers appear as up to date and working, and with the lid open, there is no flickering. I have tried several different cables of each hdmi and vga all with the same results.This didn't happen for the first 3 days with the new monitor, but then the problems started shortly after.
View 4 Replies
View Related
