External Monitor Display Issues When Not Connected
Nov 2, 2009
Well, running Windows 7 ultimate on a Dell xps m1330 laptop. Everything looks good, but at work I am connected to a matrox triple-head-to-go device which is connected to (3) 22' monitors (3840x1280 resolution). Now when I connected it, ran the nvidia app, it found it and worked great.
Problem is I get home, no external connected, so running off the laptop with the basic resolution, I am trying to start apps (firefox, stickies, etc.) and I guess they were in other spots at work as I don't see them.
I forced a close on FF, then re-started, rt clicking and maximizing which worked, but then other apps like stickies don't have that option. An alt-tab shows it running in the lower right (see screenshot), but there is absolutely no way of getting to the app! I did close the app completely and restarted, but it does restart in a location not on the screen.
View 1 Replies
ADVERTISEMENT
Jul 6, 2011
I am getting a lot of BSOD when my laptop is connected to an external monitor using a display-port cable.The system is fine when I don't use a external monitor and use just laptop screen. External monitor is a Dell 30inch. I have tried different display-port cables, different monitors, tried connecting via vga...still get BSOD, so I am thinking the problem is more on the windows 7/software side rather than hardware.
1. Uninstall AVG free edition 2011
2. Upgraded network-gigabit driver directly from intel instead of Lenovo
3a. Upgraded Nvidia drivers directly from nvidia for Quadro 1000m (ver 8.17.12.7533 - 5/20/2011) - got BSOD within 30min
3b. Downgraded Nvidia drivers to version from Lenovo (ver 8.17.12.6696 - 2/2/2011) - still get BSOD but there is more time between BSODs.
I am using a lenovo w520 laptop, win 7 SP1, x64. 8gb memory, intel 510 solid-state drive, Nvidia Quadro 1000 and Intel HD Graphics 3000, No-Anti-Virus and running zone-alarm firewall.
View 4 Replies
View Related
Jun 24, 2012
i have a Sapphire hd 7850 graphics card and two monitors connected to it one hdmi one dvi-d. both screens are showing the same image and when i go into screen resolution it shows only one "generic PnP montitor". this was a fresh install of windows seven and it did work before that. the driver for the graphics card is saying "standard VGA adaptor" is this normal
View 1 Replies
View Related
Jun 30, 2012
I have a HP Pavilion dm1z laptop. The laptop has a HDMI port. I am trying to connect it to my Samsung BX2335 display. The display has the DVI dual link port only. So I bought a HDMI - DVI adapter.I have Win7 x64 on my laptop.When I start the laptop with the external display connected, the picture is duplicated on both the laptop and the external display. But as soon as Windows starts, the picture will only be displayed on the laptop, 'Starting Windows' being the last picture shown on both displays.After some investigation it seems that windows could not detect the external display successfully. In the 'Screen Resolution' window the external display is shown as 'Display the device on: VGA'. It is impossible to view the properties of the external display, as the option is disabled, and the display is called 'Default Monitor'.I tried updating the AMD Radeon Catalyst drivers, but this did not help. Tried to install the external display drivers, but these installed as the mobile device display drivers.
View 1 Replies
View Related
Jun 30, 2012
I have a HP Pavilion dm1z laptop. The laptop has a HDMI port. I am trying to connect it to my Samsung BX2335 display. The display has the DVI dual link port only. So I bought a HDMI - DVI adapter. I have Windows 7 x64 on my laptop. When I start the laptop with the external display connected, the picture is duplicated on both the laptop and the external display. But as soon as Windows starts, the picture will only be displayed on the laptop, 'Starting Windows' being the last picture shown on both displays. After some investigation it seems that windows could not detect the external display successfully. In the 'Screen Resolution' window the external display is shown as 'Display the device on: VGA'. It is impossible to view the properties of the external display, as the option is disabled, and the display is called 'Default Monitor'. I tried updating the AMD Radeon Catalyst drivers, but this did not help. Tried to install the external display drivers, but these installed as the mobile device display drivers.
View 1 Replies
View Related
Nov 19, 2009
the display/monitor uses the generic driver for display and it is 1024×768 or 800x600 but it looks very odd it should be bigger because my screen is bigger. I have a acer monitor but is there something I can download to fix the display size?
View 3 Replies
View Related
Aug 20, 2012
I have a splitter that I use to split laptop display to a computer monitor and a TV. Problem is that both the monitor and the TV goes to sleep after about 3 hours displaying. The splitters input connection is from a docking station from where I dock my dell laptop. I only get the display back on the two screens by powering of the splitter for a few seconds then powering it on again.
View 2 Replies
View Related
Sep 3, 2011
Checked replacing the RAM to another slot, checked by replugging the video card, but still couldn't able to get the display, checked all power cables also that is well connected.
View 2 Replies
View Related
May 3, 2011
Running Win 7 home, acer 1800.About a week ago I installed a Buffalo 1.5 TB external drive and automatic back up package, it was working very well, however it now shows as " Not Connected".I have replaced the usb lead but no change in status.It is also no showing up with other drives?Any one had this problem and found a fix?I did a search but found nothing quite like this.
View 2 Replies
View Related
Jan 16, 2013
I am using an external USB combo drive, now I decided to take out the drives and have them permanently plugged inside my system through sata. None of the hard drives are seen in the bios or windows 7 x64 yet when I plug them into my usb combo external they show straight away. I know it cant be a setting as I already have a couple of sata drives internally that work fine. Why are these two drives that have been sat in a usb external not being seen at all when plugged internally on the motherboard?
View 2 Replies
View Related
Nov 18, 2011
While my pc is on, I plug in the usb cable of my canon pixma MP276 printer. When the usb cable contact to the usb port, the lcd monitor goes into power saving mode/sleep mode (black) immediately and never turns on again no matter what I do (clicking on mouse, pressing keys on keyboard)I then need to restart the pc and everything will be normal.
View 6 Replies
View Related
Oct 6, 2011
I recently purchased an Iomega 1TB external hard drive to back up my files from my Laptop (Toshiba satellite) because it has been constantly showing hard drive failure warnings and messages telling me to back up my files. When I connected the hard drive the first time, it worked fine and I was able to access it, but didn't use it for anything at the time. The next time I used it, however, the usual "New device" sound didn't play and the hard drive didn't show up in the file browser. I then looked up the issue to find that it is a common problem where the device hasn't been assigned a drive letter. I went to the Disk Manager to fix the issue but the device was not in the list of connected devices.The problem seems to be with my computer because it works fine on my brother's computer and has no issues.Additionally, I have been having problems with Windows Update being stuck on "Downloading 0%" and have had to use the system restore several times when getting stuck on an update message on startup. I think that this may be the cause of the problem (and yes, I have turned on the hard drive).
View 9 Replies
View Related
Oct 21, 2012
I recently for the first time went over my monthly data cap for broadband and looking it to it a bit more it looks like a lot of the programs my kids are using are hogging the bandwidth. I don't really want to pay for more bandwidth (as I already pay way above average as I live in a small rural village) but I don't want to restrict too much what my kids are doing. The solution to me seems to be to see if I can monitor and if possible control to some extent the data on each of the IP connected to the router if that is at all possible. I have looked at my router settings and unfortunately they do not permit anything more than traffic monitoring and there are no custom firmwares to allows additional features of any use. Is there any software that I could use to do this?
View 1 Replies
View Related
Aug 24, 2010
I have a netbook with a 10.1 inch screen, and a 22inch LCD display panel. When I connect my netbook to the display, the words seem too small at 1920x1080 resolution. If I set the font size to 125% or 150%, then it would be too big once i unplug my external LCD and use the netbook's 10.1 screen. Setting the 22 LCD to a lower resolution makes the text look very blurred, so that's not an option.
Is there anyway/script/program to automatically change the font size when I connect/disconnect the LCD screen?
View 3 Replies
View Related
May 28, 2011
Not from, but to. It's do-able I know, but would it just utterly kill performance?
View 7 Replies
View Related
Jul 16, 2011
I've noticed that my Logitech optical mouse jerks when my Western Digital Essentials external harddrive is connected to my Bufallo USB3 PCI board (IFC-PCIE2U3). I've updated the board's firmware and driver. I'm using Windows 7 64bit. The optical mouse is connected to a separate USB2 motherboard port.
View 6 Replies
View Related
Sep 24, 2011
I have 2 displays, 1 is a TV 3 meters away hooked up to my graphics card via HDMI and the other other is obviously my PC monitor. I was hoping there would be a way to have sound exclusively on the TV while I have seperate audio on my monitor?Sorry it's a bit hard to explain. Basically I want to play a game on my PC with my headphones on while a film is playing on the TV, but if I try it atm the game shows on my monitor while the film is playing, but the sound of both is coming out of the TV.Graphics card is a HD6870, using Windows 7 x64.
View 3 Replies
View Related
Jan 25, 2010
I just got a new 9800gtx+ . i have a 22" AOC lcd screen. whenever i start my pc , the motherboard screen appears but when the windows loading screen comes my monitor shows the message input not supported I have updated my drivers and checked fastpccheck.weebly.com. but no help. After that screen the user login screen comes to display and then everything is normal. i cant figure out what is making the problem.
View 5 Replies
View Related
Sep 27, 2009
I have a ATI Radeon 7500 and i can't let windows 7 Build 7600 find it. It says under display monitor its a Standard VGA graphics adapter. I'm getting really annoyed because i can't play counter-strike...and i installed many different drivers for it but it just doesn't work. and i also wanted the Control Center but idk how as well. I upgraded today to windows 7 from XP...and dumb me didnt backup ANYTHING after a full clean wipe. So im getting really agitated and not patient about it. please help!!
and as well with my monitor display says Generic pnp Monitor and i can't find the drivers for my monitor anywhere! even on the gateway site. I have a 19" Gateway LE HD widescreen.
View 9 Replies
View Related
Aug 10, 2011
The only way I could shut acer down was unpluging my computer. The moniter said "no something, I'm sorry but I forget. Is there a way with the keyboard to shut it down? I called my provider and they said it was a moniter or card problem, but it works good since i plugged it back in. I have window 7.
View 9 Replies
View Related
Oct 10, 2009
So, I got a Benq G2400WD and a 32 inch LCD TV connected to my computer, to my ati 4890 graphic card, and i wonder if i could set a different font size/dpi on my LCD TV than whats on the Benq?
View 4 Replies
View Related
Nov 11, 2010
In Windows CP Display Settings (and in Nvidia CP) my left/main display is 1 and right is 2. In Windows CP Color Management the left is 2 and the right is 1. I would ignore this except that at least a couple applications now open on opposite displays. One is a monitor color calibration program (which also identifies them reversed) and the other a Raw Image Converter. And I don't trust that the calibration program loads the profiles separately.This happened after I reinstalled Nvidia video drivers trying to fix random bsod from firefox and IE8 - which seems to have worked.
View 5 Replies
View Related
Jul 2, 2011
I have an external monitor, actually a TV connected via S-Video cable coming out of the back of my video card. My TV is my second desktop. All of that is fine. The problem comes in when I log off or "switch users" (there are no other user profiles on my computer - I only log off or switch user to make sure the kids can't get on without my permission - they don't know my logon code), the TV loses the picture and goes grainy, but when I log back in, the TV does not "kick in" again. The only way to get the TV to display the second desktop after logging out or switching users seems to be to restart the computer entirely. If it reboots, it picks up the TV as second monitor again.
If you simply log in again, it does not pick up the TV as second monitor. Is this related to some setting that says the TV should only be the second monitor on the admin's account and not for "all users" or something? It is annoying to always be restarting my computer to watch a video on my TV. By the way, in all cases, the "Display" settings in control panel show the TV as the second monitor. But looking at the actual TV, all you see is a grainy screen that obviously is not being fed any clear signal.
View 1 Replies
View Related
Jan 11, 2013
Can't get monitor to display same resolution between 2 workspaces - Microsoft Community Copy/paste of text in OP (posted Nov 21, 2012): Ok, so here's my setup:HP EliteBook 6930p with ATI Radeon HD 3450 graphics card. Win 7 Pro 32 bit installed.I have 2 workspaces, both with docking stations.Workspace 1 (primary work site) had 24" wide (primary monitor) and 19" wide monitors.Resolutions that Windows let me set were 1920x1080 and 1440x900, respectively. These monitors were also hooked to the docking station via DVI and VGA cables, respectively.Workspace 2 had a 19" standard monitor (1280x1024, VGA, set as primary) and then I would open the laptop beside it for the dual monitor (1280x800).Today I have pulled the 19" wide from workspace 1 to replace the 19" standard at workspace 2. Windows, however, will only let me set the resolution to 1280x720 (still using VGA). Even taking off the "hide modes" option or going into the ATI Catalyst Control center to try and force it does not work. I've also tried switching between which one is primary or even making it single monitor display (on the 19" wide). 1440x900 is simply not available.
View 9 Replies
View Related
Oct 29, 2009
Windows 7 installed without any problems, and found all the hardware devices, but the only problem I have is that the monitor will only dislplay at 1920x1080. If you lower it , the monitor will not display a full screen. Tried all resolutions, and have the latest 191 drivers. Any ideas..
View 2 Replies
View Related
Sep 24, 2011
Windows 7 Home Premium - Fully updated as of today
NVIDIA GeForce 9200 - Fully updated driver to the newest one released
When I look under windows display settings or NVIDEA settings there is not an option for a second monitor any more. There used to be. Now that I got a VGA spliter, there is not. I have tried a combination of everything from direct computer to 3 different monitors, all work perfectly, but when I attached 2 monitors with the spliter, all I get is the same image on each monitor.
When I hit detect, nothing happens, both monitors are identified as #1. Have rebooted, have updated, have done just about anything I can think of. Why would windows not show a second monitor option now?? Spliter and monitors work perfectly with the laptop and second older/slower computer. But on this better computer, faster and just should be a hell of a lot better computer, I am not getting the option for a second monitor.
View 5 Replies
View Related
Jan 1, 2013
I have a Dell laptop & have been trying to use it on a external monitor but its not working. It has worked in the past but now its saying cable not connected on the external screen. FN f8 isnt working for it anymore. Any ideas how to get it working again ?
View 3 Replies
View Related
Feb 8, 2011
i have a samsung syncmaster 915N that i am trying to hook up to one of my laptops and am having no luck. i have two hp's one is a pavillion dv4, the other is a dv6000. i tried messing with every setting i could find on both computers and can't get anything but a black screen to show up on the samsung monitor. it came from a desktop that crashed so i know it works. i tried the function key that looks like the monitor as well.
View 3 Replies
View Related
Dec 9, 2009
I have a Thinkpad T61 and just installed Win 7 Professional with an external monitor.
After loading Win 7 i needed to select connect to projector to get my external monitor working. Windows 7 is displayed on the entire screen and all text is nice and crips. No distortion whatsoever.
The problem is the Win 7 Intel 965 chipset family patch. After installing it i loose about 1/2 inch on the right hand side of the monitor. Adjusting the monitor (it has an automatic focus and alignment adjustment function) does not resolve it. I still see that 1/2 inch black border there.
But worse, any text (word document, web-pages, txt files) goes from crips to blurry every 2 inches and the monitor adjustment can't fix it. Removing the Intel chipset patch and rebooting the PC shows Win 7 from frame to frame again (no more black border on the right) and the text is all crisp again.
The monitor driver version that was loaded with Win 7 is 8.15.10.1749. I downloaded the latest driver from Intel 8.15.10.1930 but even with that driver i get the black frame and text distortion back.
Anybody has experienced this before and knows how to fix it? Not using the Intel patch forces me to logon on the notebook (which is in a cupboard) then select connect to a projector again to get Win 7 onto the external monitor. And unfortunately this setting is not retained.
View 3 Replies
View Related
Jul 8, 2009
Im running 7 on my laptop, and im trying to get it to output only to my external monitor when the lid is closed. I can get it to extend my desktop, but when i close the lid, it turns off the external monitor. I have set Windows 7 to do nothing when lid is closed. Is there anyone else with this problem?
I have an Dell Inspiron 1525, with Intel x3100 integrated graphics, if that helps.
View 4 Replies
View Related
Aug 11, 2009
I have always used an external monitor when using windows vista and now that i have upgraded to windows 7 when i plug in my external monitor it flashes on and off. I have changed the refresh rate on the monitor and all it does is change how fast the external monitor flashes. Also, I had this problem when using windows vista and I changed a setting in windows task scheduler and it fixed it. Tried doing the same thing in 7 and the problem is still there. In addition, I tried using a different monitor cable and the problem is still there.
View 5 Replies
View Related
