Installing Windows 7 To An External USB2 Connected Drive?
May 28, 2011Not from, but to. It's do-able I know, but would it just utterly kill performance?
View 7 RepliesNot from, but to. It's do-able I know, but would it just utterly kill performance?
View 7 RepliesRunning Win 7 home, acer 1800.About a week ago I installed a Buffalo 1.5 TB external drive and automatic back up package, it was working very well, however it now shows as " Not Connected".I have replaced the usb lead but no change in status.It is also no showing up with other drives?Any one had this problem and found a fix?I did a search but found nothing quite like this.
View 2 Replies View RelatedI am using an external USB combo drive, now I decided to take out the drives and have them permanently plugged inside my system through sata. None of the hard drives are seen in the bios or windows 7 x64 yet when I plug them into my usb combo external they show straight away. I know it cant be a setting as I already have a couple of sata drives internally that work fine. Why are these two drives that have been sat in a usb external not being seen at all when plugged internally on the motherboard?
View 2 Replies View RelatedI recently purchased an Iomega 1TB external hard drive to back up my files from my Laptop (Toshiba satellite) because it has been constantly showing hard drive failure warnings and messages telling me to back up my files. When I connected the hard drive the first time, it worked fine and I was able to access it, but didn't use it for anything at the time. The next time I used it, however, the usual "New device" sound didn't play and the hard drive didn't show up in the file browser. I then looked up the issue to find that it is a common problem where the device hasn't been assigned a drive letter. I went to the Disk Manager to fix the issue but the device was not in the list of connected devices.The problem seems to be with my computer because it works fine on my brother's computer and has no issues.Additionally, I have been having problems with Windows Update being stuck on "Downloading 0%" and have had to use the system restore several times when getting stuck on an update message on startup. I think that this may be the cause of the problem (and yes, I have turned on the hard drive).
View 9 Replies View RelatedI connect an external device that supports USB3.0 to an USB3.0 port on the computer/mother board using an USB 3.0 cable. I can see in the device manager that there are (intel) drivers that support USB3.0. The external device (WD mypassport) advertises USB 3.0 support. Is there a way to find out in windows 7 (home premium) if the actual usb connection is really using USB3.0 or if it is falling back into USB2? Is the transmission speed in the USB connection the only hint about what is happening in the USB connection. That is, a higher speed means that USB 3.0 is really being used?
View 2 Replies View RelatedI have a compaq c772 laptop, and it's internal dvd writer is damaged. I have bought a new asus external DVD-RW, but when i tried to boot from the external dvd-rw, it did not boot.on start i pressed f9 and select the asus cd-rom to boot, but after spining the disc for a while it is booting the installed version from harddisk.
View 5 Replies View Relatedwil i be able to install windows 7 from a external optical drive? and if so. what would be a good optical drive to get? that is really good and reliable?
View 5 Replies View RelatedJust upgraded all my hardware and windows needs reinstalling to reconfigure.Trouble is my existing dvd drives are IDE and my new motherboard has no IDE port. I have a copy of windows 7 on an external hard drive in the form of an iso and various files.Is it possible to plug it into a USB port and use the external to install 7 onto the internal? I'd rather not have to buy a Sata DVD drive.Would I need to wipe everything but windows 7 on the external
View 5 Replies View Relatedhow can i install win7 on a ext hd. I can boot win7 installation files from a ext usb drive, but i cant boot win7 itself.....
View 1 Replies View RelatedI'm using a GA z77x-UD5H and it has its own UEFI dualBios. I am using an external dvd drive to try and install windows 7 because I just built this pc. I have nothing on my HDD yet. All I am trying to do is figure out how to boot using the DVD drive to install windows.
View 5 Replies View RelatedI have a laptop with a broken LCD. I can hook it up to a monitor to use, but the monitor doesn't work until Windows starts. I am trying to install XP onto the hard drive from my Windows 7 computer but am getting the "blocked due to compatibility issues" message. Is it possible to do it?
View 7 Replies View RelatedI just discovered my DVD/CD drive is not working when I attempted to launch the windows 7 iso file 64bit.
So I used isobuster to extract the files to an external harddrive ( over 300 gig). However when I try to run the setup.exe file, I get the message "setup.exe is not a valid win32 app" - not sure why? My pc has 4 gig RAM and has AMD Athlon 64 processor?
I have a Windows 7 installer DVD, but I would like to transfer the files to a USB 2.0 flash stick to install from there instead of a DVD. Can someone post a link to instructions for this and the software I need to put the files on the flash and make it bootable. There seem to be a number of applications that do this, but I would like to know that I am using something that is safe and proven to work well.
View 9 Replies View RelatedI know that you just have to plug an external hard drive in to a computer and it works right away. My problem is, I used my external hard drive so I could tape TV shows on my Bell Express Vu receiver. I disconnected the external drive and want to use it on my computer but for some reason, I can't get it to work. It shows up under Devices and it's called "Desktop". Can't see what's on it or even open it. Normally they will show up under the same area as you other drives but it won't this time.
View 3 Replies View RelatedI have a HP Pavilion dm1z laptop. The laptop has a HDMI port. I am trying to connect it to my Samsung BX2335 display. The display has the DVI dual link port only. So I bought a HDMI - DVI adapter.I have Win7 x64 on my laptop.When I start the laptop with the external display connected, the picture is duplicated on both the laptop and the external display. But as soon as Windows starts, the picture will only be displayed on the laptop, 'Starting Windows' being the last picture shown on both displays.After some investigation it seems that windows could not detect the external display successfully. In the 'Screen Resolution' window the external display is shown as 'Display the device on: VGA'. It is impossible to view the properties of the external display, as the option is disabled, and the display is called 'Default Monitor'.I tried updating the AMD Radeon Catalyst drivers, but this did not help. Tried to install the external display drivers, but these installed as the mobile device display drivers.
View 1 Replies View RelatedI have a HP Pavilion dm1z laptop. The laptop has a HDMI port. I am trying to connect it to my Samsung BX2335 display. The display has the DVI dual link port only. So I bought a HDMI - DVI adapter. I have Windows 7 x64 on my laptop. When I start the laptop with the external display connected, the picture is duplicated on both the laptop and the external display. But as soon as Windows starts, the picture will only be displayed on the laptop, 'Starting Windows' being the last picture shown on both displays. After some investigation it seems that windows could not detect the external display successfully. In the 'Screen Resolution' window the external display is shown as 'Display the device on: VGA'. It is impossible to view the properties of the external display, as the option is disabled, and the display is called 'Default Monitor'. I tried updating the AMD Radeon Catalyst drivers, but this did not help. Tried to install the external display drivers, but these installed as the mobile device display drivers.
View 1 Replies View Related.I didn't wait for the computer to tell me it was ok to remove the drive in the usb port. Now my computer no longer recognizes the external drive After removing my external hard drive (without the ok) my computer no longer recognizes the external hard drive. What do I do.
View 1 Replies View RelatedWell, running Windows 7 ultimate on a Dell xps m1330 laptop. Everything looks good, but at work I am connected to a matrox triple-head-to-go device which is connected to (3) 22' monitors (3840x1280 resolution). Now when I connected it, ran the nvidia app, it found it and worked great.
Problem is I get home, no external connected, so running off the laptop with the basic resolution, I am trying to start apps (firefox, stickies, etc.) and I guess they were in other spots at work as I don't see them.
I forced a close on FF, then re-started, rt clicking and maximizing which worked, but then other apps like stickies don't have that option. An alt-tab shows it running in the lower right (see screenshot), but there is absolutely no way of getting to the app! I did close the app completely and restarted, but it does restart in a location not on the screen.
I am getting a lot of BSOD when my laptop is connected to an external monitor using a display-port cable.The system is fine when I don't use a external monitor and use just laptop screen. External monitor is a Dell 30inch. I have tried different display-port cables, different monitors, tried connecting via vga...still get BSOD, so I am thinking the problem is more on the windows 7/software side rather than hardware.
1. Uninstall AVG free edition 2011
2. Upgraded network-gigabit driver directly from intel instead of Lenovo
3a. Upgraded Nvidia drivers directly from nvidia for Quadro 1000m (ver 8.17.12.7533 - 5/20/2011) - got BSOD within 30min
3b. Downgraded Nvidia drivers to version from Lenovo (ver 8.17.12.6696 - 2/2/2011) - still get BSOD but there is more time between BSODs.
I am using a lenovo w520 laptop, win 7 SP1, x64. 8gb memory, intel 510 solid-state drive, Nvidia Quadro 1000 and Intel HD Graphics 3000, No-Anti-Virus and running zone-alarm firewall.
I've noticed that my Logitech optical mouse jerks when my Western Digital Essentials external harddrive is connected to my Bufallo USB3 PCI board (IFC-PCIE2U3). I've updated the board's firmware and driver. I'm using Windows 7 64bit. The optical mouse is connected to a separate USB2 motherboard port.
View 6 Replies View RelatedHow To Install Windows 7 On USB Flash Drive or External Hard DriveSupposedly this is the way to install Windows 7 on a External HDD. Anyone knows if it works? cause the harddrive on my laptop is fried and I cant afford a new one, but If I can just install Windows 7 onto my ext. hdd (using my tower) i'll be good to go.
View 9 Replies View RelatedMy burner stopped working for some reason so I am attempting to install Windows7 64 from an old external IDE hard drive 2.5. I still have xp 32 and will install Windows 7 on an empty partition or erase the whole disk.The problem is I don't know how to make the external drive boot the image. The drive itself is connected via USB. I put the image of Windows 7 OS on the external disk but nothing happens. BIOS recognizes it as a USB device but wont boot. I tried windows7 DVD download tool which has an USB option, but it can't see the disk at all, doesn't recognizes it as a USB drive. Then I tried a small utility named Kon-Bot. It saw it as USB drive and created some sort of boot but when I tried to install the OS the installation screen of windows7 didn't come up.
View 9 Replies View RelatedWould just like to know if its possible to install the Windows 7 OS on an external HDD and if so how do i do it? I have a Seagate 2TB Expansion desktop External HDD, which i have created 4 partitions, 3 of the 4 partitions are used up so i thought it be kinda cool to have an OS on the External. When i try installing straight onto the external disk, i get an error saying that windows cannot be installed on a USB drive or IEE 1394
View 4 Replies View RelatedI recently bought a new laptop and decided to run Ubuntu on it. I'm fairly content with the OS, after figuring out how it works. The only problem is, I'm having trouble getting my nVidia Optimus card to switch to 3d acceleration (can't get Bumblebee to run).I figured I might as well avoid all the issues with trying to run games via Ubuntu and simply dual boot Win7 as well. I'm facing a dillema though.Apperantly I'm unable to repartition my harddrive without formatting the entire thing. Obviously, I'd like to avoid having to reinstall everything.I was thinking of installing Win7 on an external HD and running it from there, my only question is, how will this effect performanceI have a Samsung 1TB FAT32 external HD lying around which draws power and data from a single USB2 slot (no seperate adapter). How effective will it be to install and run both windows 7 and graphically instense games from it?
View 4 Replies View Relatedi recently tried to upgrade my computer by installing a new OCZ Agility III SSD. I didn't really want to reinstall windows as it is an OEM install and I dont have the disk. I therefore took the supposedly easy way out and bought a OCZ SSD Upgrade kit which contained Acronis True Image HD software to "Easily Clone and Transfer Data" as per the front of the box.The existing drives were 2 Seagate 500GB drive in a RAID0 Configuration All seemed to go well with cloning the drive, booting off the SSD until I noticed that no mass storage devices I have were being recognised anymore, all of which worked perfectly with the old RAID0 drives.
I have tried everything that I can find on this forum to no avail, however, I am not a computer expert, but a reasonably competent home user. On my motherboard (Foxconn H67MP), I have 2 yellow and 4 blue SATA ports. At the moment, I have the SSD in a blue port and have left the old disks in a RAID array on the yellow ones as I think they are the only ports that support RAID. During the installation, I repartitioned the RAID drives to create a backup partition which may or may not be relevant?I have 3 External HD, 2 WD and an Iomega all of which worked before installing the SSD. The WDs are USB powered and the Iomega (shows in device manager as Samsung HD503HI) is externally powered but none of them show in disk management. I can see the drives in device manager with a yellow warning triangle, however not in disk management. I have tried uninstalling the drives, the USB controllers, disabling power management?
Laptop: Dell Vostro V131
OS: Windows 7 Pro 64-bit
External DVD: Samsung SE-208
My external DVD works fine with the Windows 7 preinstalled in my new laptop. But when I try to re-install the Windows 7... The laptop recognizes well the external DVD The Windows 7 disc boots fine from the external DVD After that, the installation process asks for the external DVD drivers. The same thing happend with an external LG DVD.
Can I install Windows 7 for the first time, on a new computer, using an External DVD-Drive through USB? I have used 2600$ on this computer, and I think I can afford a DVD-Drive too, but i really dont need one, thats why an external one might be smarter.
View 3 Replies View Relatedwell i've got a dvd burner that i can hook up to my rig via a usb port i was wondering if i can install windows via that or do i need an internal dvd burner/reader in order to install the os?
View 3 Replies View Relatedi need tech-com caed driver so please conform my id-rkumar1151@gmail.co
View 1 Replies View RelatedHow do I activate the USB2 port on an AOC 202 Monitor model 2036Sa running Windows 7
View 3 Replies View Relatedi installed a sata controller because the sata controller on the motherboard went out. I can easily install ubuntu but when i try installing win 7 it asks for a cdrom driver, when i try booting from usb it asks for hdd driver.
View 1 Replies View Related