Installing Windows 7 From External Samsung DVD SE-208
May 27, 2012
Laptop: Dell Vostro V131
OS: Windows 7 Pro 64-bit
External DVD: Samsung SE-208
My external DVD works fine with the Windows 7 preinstalled in my new laptop. But when I try to re-install the Windows 7... The laptop recognizes well the external DVD The Windows 7 disc boots fine from the external DVD After that, the installation process asks for the external DVD drivers. The same thing happend with an external LG DVD.
I am trying to format my 1.5Tb Samsung external HDD using Windows XP X64.I tried using port E and F.Formatting goes on for upto 7 hours,progress bar gets to end and I get the 'can't complete format' message.I am a computing dummy, how to get this done correctly and successfuly.
I have just removed windows starter from my wifes Samsung N130 & installed home premium but I now get the Vista boot up scroll bar - how to remove this & get the 4 colour boot up animation?
I have a windows 7 Samsung recovery media disk and a Samsung notebook model-NP-N110 with windows xp home edition. Obviously my notebook does not have a disk drive and I want to install windows 7 on it using the disk. I am ok with computers but not very technical
I recently bought a samsung external hard (1500GB). The problem with it was that i couldn't use it on my playstation 3. i was told to format it to Fat32 (something like that), to which i used someone's link which was provided to me. After formatting it, it was still not working on my PS and to make things worse, it was now not detecting on my PC. I use Windows 7.
Samsung DVD writer [slim external] model no. SE- S084C. OS is win7 starter after connecting the drive through USB port, PnP installs hardware and when i go to "computer" it "sees" the drive (until i insert a disk and close the drawer) when i insert the installation disk that came with my unit, the drive is unable to read the disk. it just sits there making whirling noises, the green light blinks off and on and the drive icon that normally appears when i open "computer", disappears whenever i close the drive with a disk in it. the drive icon will occassionaly appear briefly and then disappear again. is this a driver/firmware issue or a "win7 does not support " issue.
Nearly got all my new build together & ready to install 7 Home Premium 64bit, on a I5 2400, 8GB DDRII.The Samsung HDD is 1TB should/can the windows be installed as a single C drive partition or would it be best to partition it. Ideally I wanted all the C drive in one place. Not sure what to do, ideally do not want a redundant partition.
I know about the immediate 'loss' of disk space owing to the two different methods of measurement. 1Tb to 931Gb - it's annoying, but I'm used to it.No, before a defrag by Fixbee I had 701Gb free, afterwards - in a matter of 2 hours - I had 537Gb. Obviously, I'm not going to use this product again, where a clean-up is obviosly a 'dirt up', but how do I undo the damage that it's caused - especially if it's not the only 'clean up' tool that might do this?
How To Install Windows 7 On USB Flash Drive or External Hard DriveSupposedly this is the way to install Windows 7 on a External HDD. Anyone knows if it works? cause the harddrive on my laptop is fried and I cant afford a new one, but If I can just install Windows 7 onto my ext. hdd (using my tower) i'll be good to go.
My burner stopped working for some reason so I am attempting to install Windows7 64 from an old external IDE hard drive 2.5. I still have xp 32 and will install Windows 7 on an empty partition or erase the whole disk.The problem is I don't know how to make the external drive boot the image. The drive itself is connected via USB. I put the image of Windows 7 OS on the external disk but nothing happens. BIOS recognizes it as a USB device but wont boot. I tried windows7 DVD download tool which has an USB option, but it can't see the disk at all, doesn't recognizes it as a USB drive. Then I tried a small utility named Kon-Bot. It saw it as USB drive and created some sort of boot but when I tried to install the OS the installation screen of windows7 didn't come up.
Would just like to know if its possible to install the Windows 7 OS on an external HDD and if so how do i do it? I have a Seagate 2TB Expansion desktop External HDD, which i have created 4 partitions, 3 of the 4 partitions are used up so i thought it be kinda cool to have an OS on the External. When i try installing straight onto the external disk, i get an error saying that windows cannot be installed on a USB drive or IEE 1394
I'm trying to use my Samsung Galaxy Nexus phone as an internet modem for my laptop, but I've been encountering problems downloading the USB driver for it.When I try installing the PdaNet program, I encounter this:When I click "Yes" reinstall the driver, I get this very weird error.After I click "OK", I get this:I follow the instructions and then I see this:When I go to the Device Manager, I DO see an error:I'm guessing the problem is an existing Android driver installed on my computer cause I had an HTC Dream before the Nexus - How do I find the existing older driver(s) and delete it so I can install the latest Samsung driver? It doesn't show up in the Control Panel. ALSO, I've tried doing this: How To Easily Remove Old Drivers from Windows And I still didn't see any older USB drivers.
I'm trying to use my Samsung Galaxy Nexus phone as an internet modem for my laptop, but I've been encountering problems downloading the USB driver for it.When I try installing the PdaNet program, I encounter this:When I click "Yes" reinstall the driver, I get this very weird error:After I click "OK", I get this:I follow the instructions and then I see this:When I go to the Device Manager, I DO see an error:I'm guessing the problem is an existing Android driver installed on my computer cause I had an HTC Dream before the Nexus - How do I find the existing older driver(s) and delete it so I can install the latest Samsung driver? It doesn't show up in the Control Panel.
I recently bought a new laptop and decided to run Ubuntu on it. I'm fairly content with the OS, after figuring out how it works. The only problem is, I'm having trouble getting my nVidia Optimus card to switch to 3d acceleration (can't get Bumblebee to run).I figured I might as well avoid all the issues with trying to run games via Ubuntu and simply dual boot Win7 as well. I'm facing a dillema though.Apperantly I'm unable to repartition my harddrive without formatting the entire thing. Obviously, I'd like to avoid having to reinstall everything.I was thinking of installing Win7 on an external HD and running it from there, my only question is, how will this effect performanceI have a Samsung 1TB FAT32 external HD lying around which draws power and data from a single USB2 slot (no seperate adapter). How effective will it be to install and run both windows 7 and graphically instense games from it?
i recently tried to upgrade my computer by installing a new OCZ Agility III SSD. I didn't really want to reinstall windows as it is an OEM install and I dont have the disk. I therefore took the supposedly easy way out and bought a OCZ SSD Upgrade kit which contained Acronis True Image HD software to "Easily Clone and Transfer Data" as per the front of the box.The existing drives were 2 Seagate 500GB drive in a RAID0 Configuration All seemed to go well with cloning the drive, booting off the SSD until I noticed that no mass storage devices I have were being recognised anymore, all of which worked perfectly with the old RAID0 drives.
I have tried everything that I can find on this forum to no avail, however, I am not a computer expert, but a reasonably competent home user. On my motherboard (Foxconn H67MP), I have 2 yellow and 4 blue SATA ports. At the moment, I have the SSD in a blue port and have left the old disks in a RAID array on the yellow ones as I think they are the only ports that support RAID. During the installation, I repartitioned the RAID drives to create a backup partition which may or may not be relevant?I have 3 External HD, 2 WD and an Iomega all of which worked before installing the SSD. The WDs are USB powered and the Iomega (shows in device manager as Samsung HD503HI) is externally powered but none of them show in disk management. I can see the drives in device manager with a yellow warning triangle, however not in disk management. I have tried uninstalling the drives, the USB controllers, disabling power management?
I have a compaq c772 laptop, and it's internal dvd writer is damaged. I have bought a new asus external DVD-RW, but when i tried to boot from the external dvd-rw, it did not boot.on start i pressed f9 and select the asus cd-rom to boot, but after spining the disc for a while it is booting the installed version from harddisk.
Can I install Windows 7 for the first time, on a new computer, using an External DVD-Drive through USB? I have used 2600$ on this computer, and I think I can afford a DVD-Drive too, but i really dont need one, thats why an external one might be smarter.
well i've got a dvd burner that i can hook up to my rig via a usb port i was wondering if i can install windows via that or do i need an internal dvd burner/reader in order to install the os?
wil i be able to install windows 7 from a external optical drive? and if so. what would be a good optical drive to get? that is really good and reliable?
Just upgraded all my hardware and windows needs reinstalling to reconfigure.Trouble is my existing dvd drives are IDE and my new motherboard has no IDE port. I have a copy of windows 7 on an external hard drive in the form of an iso and various files.Is it possible to plug it into a USB port and use the external to install 7 onto the internal? I'd rather not have to buy a Sata DVD drive.Would I need to wipe everything but windows 7 on the external
I'm using a GA z77x-UD5H and it has its own UEFI dualBios. I am using an external dvd drive to try and install windows 7 because I just built this pc. I have nothing on my HDD yet. All I am trying to do is figure out how to boot using the DVD drive to install windows.
how to put an OS in external HD. i mean putting win8 in external how can i boot the external HD do i need to configure the boot priority?im using laptap..how to do a clean reformat of C: i mean clean as new. without a cd is .ISO file bootable?
I have a laptop with a broken LCD. I can hook it up to a monitor to use, but the monitor doesn't work until Windows starts. I am trying to install XP onto the hard drive from my Windows 7 computer but am getting the "blocked due to compatibility issues" message. Is it possible to do it?
I am atempting to install windows 7 and XP on a 500gb disk drive, I also have an 80gb drive with Linux currently running on it. Is there anything that I should do so that I can access all three
I have a HP built box that I purchased less than a year ago. The hard drive died, along with the motherboard.I purchased a new hard drive and the full version of Windows 7 Home Premium 64bit and had the shop replace the MB, Install the new hard drive and O/S.The motherboard is an ASUS M4A785-M, with an on-board Realtek PCIe GBE Family Controller (according to Windows Device Manager).I have a couple of additional cards installed, one is an eSata controller for an external hard drive and the other is a SIIG DP FireWire 800 3-Port PCIe card.I initially installed the SIIG because the FireWire chip set is Texas Instruments, because I have a PreSonus Firestudio Mobile (sound card, recording hardware)and it only plays nicely with Texas Instruments. The SIIG card shows up in Device Manager under IEEE 1394 Bus host controllers as "Texas Instruments 1394 OHCI Compliant Host Controller", which I "assume" is correct?
My problem is the PreSonus hardware refuses show up in Device Manager or initialize (there is an indicator light on the front of the unit that will glow blue when it is connected or flash blue-red when it isn't). PreSonus has a driver set for the Firestudio Mobile, that is called Universal Control.I have attempted to install Universal Control several times, but each attempt has resulted in failure, with the Driver version showing 0.0.0 etc. I realize this is the problem, but I have no idea how to force the issue.If I could get the PreSonus drivers to install, I would be home free (I think).he PreSonus hardware should show up in Device Manager under Sound, video and game controllers, but it doesn't.I have also posted about the issue on the PreSonus forum, but haven't had any solutions posted.This computer and the hardware are what I use to run my Recording Studio and without the Firestudio, I am effectively out of business.I should also note, that I haven't even installed any other software beyond windows 7, other than a couple of utilities. Not even my DAW or the drivers for my peripheral midi devices.
I just discovered my DVD/CD drive is not working when I attempted to launch the windows 7 iso file 64bit.
So I used isobuster to extract the files to an external harddrive ( over 300 gig). However when I try to run the setup.exe file, I get the message "setup.exe is not a valid win32 app" - not sure why? My pc has 4 gig RAM and has AMD Athlon 64 processor?
I know that you just have to plug an external hard drive in to a computer and it works right away. My problem is, I used my external hard drive so I could tape TV shows on my Bell Express Vu receiver. I disconnected the external drive and want to use it on my computer but for some reason, I can't get it to work. It shows up under Devices and it's called "Desktop". Can't see what's on it or even open it. Normally they will show up under the same area as you other drives but it won't this time.