I have a compaq c772 laptop, and it's internal dvd writer is damaged. I have bought a new asus external DVD-RW, but when i tried to boot from the external dvd-rw, it did not boot.on start i pressed f9 and select the asus cd-rom to boot, but after spining the disc for a while it is booting the installed version from harddisk.
View 5 Replieswil i be able to install windows 7 from a external optical drive? and if so. what would be a good optical drive to get? that is really good and reliable?
View 5 Replies View RelatedJust upgraded all my hardware and windows needs reinstalling to reconfigure.Trouble is my existing dvd drives are IDE and my new motherboard has no IDE port. I have a copy of windows 7 on an external hard drive in the form of an iso and various files.Is it possible to plug it into a USB port and use the external to install 7 onto the internal? I'd rather not have to buy a Sata DVD drive.Would I need to wipe everything but windows 7 on the external
View 5 Replies View Relatedhow can i install win7 on a ext hd. I can boot win7 installation files from a ext usb drive, but i cant boot win7 itself.....
View 1 Replies View RelatedNot from, but to. It's do-able I know, but would it just utterly kill performance?
View 7 Replies View RelatedI'm using a GA z77x-UD5H and it has its own UEFI dualBios. I am using an external dvd drive to try and install windows 7 because I just built this pc. I have nothing on my HDD yet. All I am trying to do is figure out how to boot using the DVD drive to install windows.
View 5 Replies View RelatedI have a laptop with a broken LCD. I can hook it up to a monitor to use, but the monitor doesn't work until Windows starts. I am trying to install XP onto the hard drive from my Windows 7 computer but am getting the "blocked due to compatibility issues" message. Is it possible to do it?
View 7 Replies View RelatedI just discovered my DVD/CD drive is not working when I attempted to launch the windows 7 iso file 64bit.
So I used isobuster to extract the files to an external harddrive ( over 300 gig). However when I try to run the setup.exe file, I get the message "setup.exe is not a valid win32 app" - not sure why? My pc has 4 gig RAM and has AMD Athlon 64 processor?
I know that you just have to plug an external hard drive in to a computer and it works right away. My problem is, I used my external hard drive so I could tape TV shows on my Bell Express Vu receiver. I disconnected the external drive and want to use it on my computer but for some reason, I can't get it to work. It shows up under Devices and it's called "Desktop". Can't see what's on it or even open it. Normally they will show up under the same area as you other drives but it won't this time.
View 3 Replies View Related.I didn't wait for the computer to tell me it was ok to remove the drive in the usb port. Now my computer no longer recognizes the external drive After removing my external hard drive (without the ok) my computer no longer recognizes the external hard drive. What do I do.
View 1 Replies View RelatedHow To Install Windows 7 On USB Flash Drive or External Hard DriveSupposedly this is the way to install Windows 7 on a External HDD. Anyone knows if it works? cause the harddrive on my laptop is fried and I cant afford a new one, but If I can just install Windows 7 onto my ext. hdd (using my tower) i'll be good to go.
View 9 Replies View RelatedMy burner stopped working for some reason so I am attempting to install Windows7 64 from an old external IDE hard drive 2.5. I still have xp 32 and will install Windows 7 on an empty partition or erase the whole disk.The problem is I don't know how to make the external drive boot the image. The drive itself is connected via USB. I put the image of Windows 7 OS on the external disk but nothing happens. BIOS recognizes it as a USB device but wont boot. I tried windows7 DVD download tool which has an USB option, but it can't see the disk at all, doesn't recognizes it as a USB drive. Then I tried a small utility named Kon-Bot. It saw it as USB drive and created some sort of boot but when I tried to install the OS the installation screen of windows7 didn't come up.
View 9 Replies View RelatedWould just like to know if its possible to install the Windows 7 OS on an external HDD and if so how do i do it? I have a Seagate 2TB Expansion desktop External HDD, which i have created 4 partitions, 3 of the 4 partitions are used up so i thought it be kinda cool to have an OS on the External. When i try installing straight onto the external disk, i get an error saying that windows cannot be installed on a USB drive or IEE 1394
View 4 Replies View RelatedI recently bought a new laptop and decided to run Ubuntu on it. I'm fairly content with the OS, after figuring out how it works. The only problem is, I'm having trouble getting my nVidia Optimus card to switch to 3d acceleration (can't get Bumblebee to run).I figured I might as well avoid all the issues with trying to run games via Ubuntu and simply dual boot Win7 as well. I'm facing a dillema though.Apperantly I'm unable to repartition my harddrive without formatting the entire thing. Obviously, I'd like to avoid having to reinstall everything.I was thinking of installing Win7 on an external HD and running it from there, my only question is, how will this effect performanceI have a Samsung 1TB FAT32 external HD lying around which draws power and data from a single USB2 slot (no seperate adapter). How effective will it be to install and run both windows 7 and graphically instense games from it?
View 4 Replies View Relatedi recently tried to upgrade my computer by installing a new OCZ Agility III SSD. I didn't really want to reinstall windows as it is an OEM install and I dont have the disk. I therefore took the supposedly easy way out and bought a OCZ SSD Upgrade kit which contained Acronis True Image HD software to "Easily Clone and Transfer Data" as per the front of the box.The existing drives were 2 Seagate 500GB drive in a RAID0 Configuration All seemed to go well with cloning the drive, booting off the SSD until I noticed that no mass storage devices I have were being recognised anymore, all of which worked perfectly with the old RAID0 drives.
I have tried everything that I can find on this forum to no avail, however, I am not a computer expert, but a reasonably competent home user. On my motherboard (Foxconn H67MP), I have 2 yellow and 4 blue SATA ports. At the moment, I have the SSD in a blue port and have left the old disks in a RAID array on the yellow ones as I think they are the only ports that support RAID. During the installation, I repartitioned the RAID drives to create a backup partition which may or may not be relevant?I have 3 External HD, 2 WD and an Iomega all of which worked before installing the SSD. The WDs are USB powered and the Iomega (shows in device manager as Samsung HD503HI) is externally powered but none of them show in disk management. I can see the drives in device manager with a yellow warning triangle, however not in disk management. I have tried uninstalling the drives, the USB controllers, disabling power management?
Laptop: Dell Vostro V131
OS: Windows 7 Pro 64-bit
External DVD: Samsung SE-208
My external DVD works fine with the Windows 7 preinstalled in my new laptop. But when I try to re-install the Windows 7... The laptop recognizes well the external DVD The Windows 7 disc boots fine from the external DVD After that, the installation process asks for the external DVD drivers. The same thing happend with an external LG DVD.
Can I install Windows 7 for the first time, on a new computer, using an External DVD-Drive through USB? I have used 2600$ on this computer, and I think I can afford a DVD-Drive too, but i really dont need one, thats why an external one might be smarter.
View 3 Replies View Relatedwell i've got a dvd burner that i can hook up to my rig via a usb port i was wondering if i can install windows via that or do i need an internal dvd burner/reader in order to install the os?
View 3 Replies View Relatedhow to put an OS in external HD. i mean putting win8 in external how can i boot the external HD do i need to configure the boot priority?im using laptap..how to do a clean reformat of C: i mean clean as new. without a cd is .ISO file bootable?
View 2 Replies View RelatedI am atempting to install windows 7 and XP on a 500gb disk drive, I also have an 80gb drive with Linux currently running on it. Is there anything that I should do so that I can access all three
View 2 Replies View RelatedI have a HP built box that I purchased less than a year ago. The hard drive died, along with the motherboard.I purchased a new hard drive and the full version of Windows 7 Home Premium 64bit and had the shop replace the MB, Install the new hard drive and O/S.The motherboard is an ASUS M4A785-M, with an on-board Realtek PCIe GBE Family Controller (according to Windows Device Manager).I have a couple of additional cards installed, one is an eSata controller for an external hard drive and the other is a SIIG DP FireWire 800 3-Port PCIe card.I initially installed the SIIG because the FireWire chip set is Texas Instruments, because I have a PreSonus Firestudio Mobile (sound card, recording hardware)and it only plays nicely with Texas Instruments. The SIIG card shows up in Device Manager under IEEE 1394 Bus host controllers as "Texas Instruments 1394 OHCI Compliant Host Controller", which I "assume" is correct?
My problem is the PreSonus hardware refuses show up in Device Manager or initialize (there is an indicator light on the front of the unit that will glow blue when it is connected or flash blue-red when it isn't). PreSonus has a driver set for the Firestudio Mobile, that is called Universal Control.I have attempted to install Universal Control several times, but each attempt has resulted in failure, with the Driver version showing 0.0.0 etc. I realize this is the problem, but I have no idea how to force the issue.If I could get the PreSonus drivers to install, I would be home free (I think).he PreSonus hardware should show up in Device Manager under Sound, video and game controllers, but it doesn't.I have also posted about the issue on the PreSonus forum, but haven't had any solutions posted.This computer and the hardware are what I use to run my Recording Studio and without the Firestudio, I am effectively out of business.I should also note, that I haven't even installed any other software beyond windows 7, other than a couple of utilities. Not even my DAW or the drivers for my peripheral midi devices.
I have a USB external hard drive that I keep all my documents etc on (had it for years)I upgraded from Vista Home to & Home Premium then had to upgrade recently to Professional to run my Sage. Through all these upgrades my ext. drive ran fine. Occasionally the drvie letter would change if I had something else plugged into the USB, this was always easily corected in disk management by changing the drive path.The connection on the case packed up so I had to get the drive put into a new case, now when I plug it in the drive is assigned G instead of F, I tried to change the drive letter allocation in Disk Management but it won't let me as the program still thinks I have a second ext. hard drive which is labelled F. I suspect this has happened because when the usb connection broke the drive was disconnected suddenly instead of a proper eject.How do I get Disk Management to remove the inactive drive - i can't find any obvious way - eject, delete etc are all missing when I click on tools or tasks.
View 2 Replies View RelatedLow disk space, Can transfer data on D drive to an external hard drive
View 5 Replies View Relatedi`ve saved alot of my files i had on my previous os (xp pro) on my expansion external drive. now i`m running on windows 7 i can not access the drive as it says it needs formatting. i`ve looked in disk manager and it is showing RAW. i really need these files and they are they only back up i have. i wouldv`e thought it would have been a simple install but it`s proving very different. my expansion drive is a seagat 1TB.
View 6 Replies View RelatedWhy do files moved to an external drive not behave the same as those same files in an internal drive? I noticed that if I do anything to a file that is in an external drive, that file can not be saved under the same name (read only). In order to do so one must save it internally and then copy or move it to the external drive.So I did just that--I copied a file from taken from an external drive, saved it in the internal one and then copied it back to the external one. Now if I r-click the propeerties of these 2 same files and then go to the 'Security' tab a difference is immediately apparent: The internal one has -1- System & -2 My-computername (user-PCuser and -3- Administrators (user-PCAdministrators) with all 3 accounts allowing all (full control, read, write, etc..). While the external drive has in Properties; -1- System -2- Administrators (user-PCAdministrators) and -3- Users (user-PCUserrs) with this final 3d one (and different one) with no Allow for "full control, or modify or write. So how does one have all its files in this external drive behave and be equal to all the same files in the internal drive?Since -3- Users (user-PCUserrs) in the external drive is that which is differnt from the internal drive I was wondering if it is OK to delete this Permission or 'attribute' or whatever it is called and create instead one equal to the one in the internal drive -3- Administrators (user-PCAdministrators)? ANd of course doing so in one go and not file after file after file individually?
View 6 Replies View RelatedWhy do files moved to an external drive not behave the same as those same files in an internal drive? I noticed that if I do anything to a file that is in an external drive, that file can not be saved under the same name (read only). In order to do so one must save it internally and then copy or move it to the external drive. So I did just that--I copied a file from taken from an external drive, saved it in the internal one and then copied it back to the external one. Now if I r-click the propeerties of these 2 same files and then go to the 'Security' tab a difference is immediately apparent: The internal one has -1- System & -2 My-computername (user-PCuser and -3- Administrators (user-PCAdministrators) with all 3 accounts allowing all (full control, read, write, etc..). While the external drive has in Properties; -1- System -2- Administrators (user-PCAdministrators) and -3- Users (user-PCUserrs) with this final 3d one (and different one) with no Allow for "full control, or modify or write. So how does one have all its files in this external drive behave and be equal to all the same files in the internal drive? Since -3- Users (user-PCUserrs) in the external drive is that which is differnt from the internal drive I was wondering if it is OK to delete this Permission or 'attribute' or whatever it is called and create instead one equal to the one in the internal drive -3- Administrators (user-PCAdministrators)? ANd of course doing so in one go and not file after file after file, individually, would be ideal.
View 3 Replies View RelatedI am running Windows 7 Pro. Have a external dual dock connected to a estata port. One of the drives assigned letter K often comes up as E and I have to change as application is looking for K. Another disk in this dock works fine. No problems. why this might be happening or anyway to prevent? Seems like when I go to disk management and assign K it should stay that way.
View 6 Replies View Relatedi got a new processor, the o.c software and teh bios filed to set on auto, so i had to do it manually..over and over and over and over again. around 8 am i started to tweak the setting on the o.c software and in my slep deprived state i did something very stupid..i set the o.c software to load the last setting on startup.afterward i hit a setting the crashed the computer, so now i can't boot it, cuase the o.c software is loading those com crashing setting on startup. so i when to use a back up harddrive which was empty, so i am now using teh computer with a fresh hdd. the other hardrive is as it was when i screwed up royal.all ihave to do is load internal harddrive on my external hdd dock, in a virtualized environment which i looked for help threw google, which lead me to virtual box..which was 3 hours of wasted time, then i ran another search which lead me here eventaully, which referred me VMware, so i went to VMware only to find a god awful amount of crap i don't need and getting support from them was a joke, put in a ticket and await..wait..wait..wait, two hours later , i come back here. i had no idea what api from VMware to go and get most of it seems like its meant for servers, and im not running a server.i have a hdd thats good, in a external dock, i can load its internal working threw my computer, but i need it virtaulized in order to uncheck that box in the o.c software so it doesn't load on startup, thats it >.<
View 1 Replies View RelatedI can see my external hard drive in device manager, but not in my comp
View 3 Replies View RelatedI only have an external firewire dvd drive and wondered if there's a way i can install Windows 7 from it. I don't want to overwrite my current XP installation and lose my programs and settings, so would like to install it onto a sepatate hard drive.
View 8 Replies View RelatedI have a Windows 7 machine with external drives. I bought a new machine, also with Windows 7. When I moved the external drives over I can't see the folders. I thought the drive might be damaged so I moved them back to the original machine and I can see the folders. Why can't I see the folders on the external drive with the new machine?
View 3 Replies View Related