I have Windows 7 on my HP Pavilion dv9820us laptop. From time to time when I shut it down, it will go to a screen that says "Operations in progress" and then something about that it will shut down when it is completed. However, no matter how long I leave it (up to 24 hours) it never finishes. I always end up having to hold the power button to shut it down.
View 2 Replies
have following problem. I started to notice a long unresponsiveness or even complete freeze of some applications after performing certain file operations. These are the issues:
- In �Torrent if I delete a task only, it continues operation instantly. If I delete task+associated torrent file, it becomes unresponsive for unusual period (mostly 30-60sec.). If I delete task+torrent file+torrent contents, it even freezes completely (didnot confirm if it only is a too long delay or complete freeze but after about 5 min I have given up and killed the application)
- In Corel PhotoPaint if I save a large image to disk, after confirming the filter settings the application becomes unresponsive for about 30-60 sec. and during this period I get continuous system dialogs about application not being ready, Switch To.../Retry/Cancel.
- In Win Explorer if I delete file, it becomes quite long before the confirmation dialog appears and it also takes quite a long the deleting operation self. This doesnot happen always.
I thing all issues are related, not seen these delays on other applications yet. How do I locate the culprit and fix the problem? I didnot have these delays earlier.
I lost the connection and so I started to shut down my computer. I had programs running that required the Internet to work, and when it went off, they had faded, which is what occurs when you try to shut down a program and it's lagging. Well, the computer took forever for me to pull up the Start Menu because of all these programs lagging, so I had to turn it off manually by holding the power button, which apparently threw it into Sleep Mode (the prompt comes up whenever I turn off my computer, though, since I usually leave my monitor on).Now, even after five or six attempts at restarting the computer, it will let me put in my password to gain access to my account, and then that's it. I will see the desktop and the icons, and the taskbar, but that's where the problem is. The taskbar won't stop loading, nor has it stopped lagging. I can't access anything from the taskbar and whenever I try, it won't let me do anything on the desktop, either. This morning I tried again, and it was still having loading issues. The cursor will turn into the spinning circle whenever I go to the taskbar, but back to the normal pointer whenever I move it away from the taskbar.I'm able to open the computer in Safe Mode and operate as normally.
View 1 Replies View RelatedI've recently received a laptop which has Windows 7 preloaded. About a week after starting to use it, I started experiencing random crashes while CPU intensive operations are occurring. I don't even get a BSOD, the screen just goes black for about .5 of a second and then the entire computer just shuts off. Furthermore, I've scanned for any malicious software, bad packets, etc etc. and those scans returned nothing.
View 2 Replies View RelatedI've uninstalled Nitro PDF professional after it expired and reinstall it to register but this message appears: "Multiple restore hard drive operations damaged the license and the product must be re-registered #2".
View 9 Replies View RelatedI know the progress bar wasn't built in to IE9 but I cant do without it and I did have it somehow whether it was a third party item or what don't know but its gone. I know there is a paid one at Xinify but how to restore the stanard progress/status bar to MIE9?
View 4 Replies View RelatedI want to know if there is a way to restore the progress bar in internet explorer 9. I found a site that wanted me to pay for a plug in but why should I have to pay for it? I want to restore the bar and I think it should be included. Are there any places I can get the plug in for free?
View 1 Replies View RelatedI am running Windows 7 Home Premium with IE 9. How do you get the File Download Bar or what ever they call it to be visable when you are downloading a file from a website. The bar I am talking about shows up at the bottom of the screen and it shows the name of the program file in bold letters and at the right end of the bar you have three options: "RUN" "SAVE" or ("save as)" "CANCEL" Or and "X" at the edge of the bar.
View 5 Replies View RelatedI have a Dell Inspiron laptop that got a virus on it. I tried to fix the virus but was just not able to and every time I turned the computer on it would get an error message and ask if I wanted to start windows normally, once in a while I would get a BSOD and it would reset itself. I don't remember what the error messages were because I kinda ignored the problem for a couple months and finally got around to saving what I needed and trying to do a reset. Everything went fine when I went into Dells Datasafe Restore. After it wiped the drive and re-installed I got past the Dell screen at startup and on to the windows screen then suddenly got a flash of a BSOD then the computer restarted. I went through the startup repair and got the message Failure while setup is in progress. I've been searching for a solution for a few hours now and I haven't found one. I don't have a recovery disk (I was just trying to use the partition) and I don't have a windows 7 cd. Where do I go from here?
View 5 Replies View RelatedClicking on a large folder in Explorer can cause a slowly-moving green progress bar. In some cases this can take several minutes to complete.
A common cause is thumbnail caching of image and video files, resulting from having properties | customize | "optimize this folder for:" set to pictures, vs documents or General items.
The most likely solution: in Explorer, right click on folder, select properties, customize, under "optimize this folder for:", select either General items, or documents. Set check box "Also apply this template to all subfolders", then click apply.
The slow progress bar is apparently caused by Explorer scanning the folder and all subfolders to pre-render thumbnail images for image and video files. This happens if the "optimize this folder" setting is pictures or videos. This happens when merely clicking on the top-level folder.
If "optimize this folder" is set to documents or General, the thumnails are not rendered until you actually click on the folder or sub-folder containing those.
This was discussed in another thread on this forum, but it was full of speculative remedies, and the actual cause and remedy was not posted until the last thread (and one year after the thread was started): Accessing drives in Windows Explorer takes a long time I'm creating this thread with a more exact title and concise description, to aid in finding the solution based on a symptom search.
While the above is the most likely cause of a slow Explorer progress bar, there are other possible causes. These include clicking on a remote folder on a slow network, general slowdown due to indexing, disk drive or filesystem caching disabled, disk drive retries due to impending hardware failure, corrupted video files or codec, etc.
after loading my recovery disc on acer 5534. after all files load it freezes at restore progress screen. If I try restart BOOTMGR missing ctrl alt dlte
View 1 Replies View RelatedWe are having ongoing problems with Windows 7 and mapped drive latency on our network. Our environment is as follows:Multiple servers running Windows 2008 & 2008 R2, some VMware servers (including our file server). Windows 7 x64 came preloaded on a brand new Lenovo think-pad, 4gb memory. This occurs on 4 different laptops. This problem ALSO occurs in exactly the same way on an HP Compaq x64 desktop running Windows 7 32. All systems are fully patched & up to date on SP's. Running IP 4 & 6 on all servers & Windows 7 machines Connected to GB Cisco switch.We run login scripts via GPOs that map drives (with net use commands) to 3 shares on our file-server, drives G, H and S.A fourth mapped drive to an IBM I-series does NOT experience these issues.
In Windows Explorer, mapped drives may or may not appear with red X's, but when clicked on they hang with a spinner and the green bar at the top of Explorer begins to run. This occurs randomly, but usually not right after boot up. It can take over a minute to complete. Also, in Word, which has references to these drives in file locations, file opening and saves can be very slow as it attempts to access these shares.This issue has delayed our roll out of Windows 7.Its unacceptably slow and cannot be used in a production environment.We have tried every suggestion we can find on the Internet:Turned off auto-tuning, indexing, thumbnails, set auto-disconnect to the max (both 99999 and ffffffff). Server & clients. No luck. Changed properties on the mapped drives to optimize for documents...no change.Changes setting on the network cards to disable flow control, set static link speed & duplex. Network drivers have been updated. Even tried using our wireless network and disabling wired connection...no change.All bios and hardware updates are completed...no change.Turned on and off network discovery..no change.
Disabled SMB2 on servers & clients...no change.Disabled firewalls, and unloaded antivirus (Trend)...no change.Safe boot with networking & clean boot with no services other than Microsoft...no change.
This is a bit of a strange problem, admittedly. Nonetheless, I'm hopeful that someone here may have a solution.Win 7 Explorer has this "feature" whereby you can undo all sorts of file operations (rename, move, delete) by pressing ctrl+z or by clicking the "undo <whatever>" menu item in the context menu.I find this incredibly annoying, because the only time I use this feature is by accident (either I was trying to ctrl+z in another program window without realizing the focus was switched to, say, the desktop; or I simply failed to click the menu item I was aiming for, and hit the undo <whatever> instead..)
View 5 Replies View RelatedIs there a way to force Windows to save a programs progress (ie a rendering program such as Revit) and restart, similar to the actions it takes before the computer shuts down after the battery has died?
View 3 Replies View RelatedWhen I try to do a clean install of Windows 7 I get the loading files white progress bar you normally get during an installation, it then goes directly to the scrolling progress bar that would normally appear before a Windows startup, and then goes to a blank Windows 7 desktop with only a cursor (that I can move).I have a computer with the following specs:[CODE]I have tried to install with every version I can get my hands on, both 32 and 64 bit. None of them are upgrade versions. I've tried installing on a fresh WD Raptor and an Intel G25 SSD. All other drives have been disconnected. I've moved my memory around and tried with one stick. My mainboard has the latest official BIOS, although there is a new beta.
I ran the Windows 7 compatibility test and didn't see anything that would cause this problem.I have searched the internet and have not been able to find a solution sonstalling Windows XP has never been a problem, just Windows 7, always with the same problem.This is one of the few times when I have not been able to look around a find an existing answer to a problem and I am stumped.
Although there isn't an interface specficially designed for it, you can actually view the progress of a volume shrink operation in Windows 7, and cancel a shrink that is in-progress, using the Disk Defragmenter tool.Volume shrink can take a long time, especially if you have a very full, or fragmented hard drive. Being able to view the shrink progress can be pretty handy!
View 1 Replies View Relatedwith several programs, I am having a problem installing. I repeatedly have errors with "another installation already in progress". I know the fix for that by changing it to disabled, restarting, and changing it to manual. But it keeps happening. On the various stuff I try to install, I get errors even AFTER doing that fix. Like ""there was an error creating a temporary file that is needed to complete this installation." That's the one I'm getting now.
View 7 Replies View RelatedI am having the following system configuration
XPS L401X Base
Genuine Windows(R) 7 Home Premium 64bit (English)
Intel(R) Core(TM) i7-740QM Processor
6GB 1333MHz DDR3 SDRAM (1 x 2GB + 1 x 4GB)
640GB 7200RPM Hard Drive
Lately whenever i try to start my computer it pass the Dell Bios and then directly goes to the screen which states
Repair your system or Start windows normally When i chose repair system , it start downloading windows files and then launch the windows , but hung up at the sky blue login window with only movable cusor . When i choose to start windows normally it gives me BSOD momentarly ( hard to see the message) and then restarts again . i tried with the advanced boot up options like
repair my computer , all safe modes , restore to last good configuration but it does the same and hangs at windows loging sky blue window .I Tried to run the Dell PSA+ Diagnostic and it returns with 2000-0146 error . As per the Dell online solutions for this type of error ,I tried to reinstall the Hard disk but the problem still exist.
Suddenly my Win 7 Home Premium x64 will not boot. The system starts, POSTs then loads the DVD driver, then the screen goes black (not blank but "lit up" black if that makes sense). Then nothing. If I use Hiren's boot cd I can boot up using the "boot from HDD" option fine and Windows operates normally. System restore to a previous configuration made no difference to the original problem. I cannot boot into Safe Mode. F8 just offers me boot order options.
- Running the Windows 7 DVD I find: "No operating system is listed on the Repair Windows option."
- Running Startup Repair finds the following error: "the partition table does not have a valid system partition" which it claims to have repaired, but the error remains and Windows will still not boot.
I followed this advice:
Boot 7 dvd to system recovery options command prompt. Type: Diskpart
list vol (find the vol letter e.g C or partition number e.g. 1 for the system partition )
Sel vol C ( or sel vol 1, obviously use the correct letter or number)
act exi
My system partition was easily identified and listed as healthy so I selected it and made it active. The problem still remains exactly the same. My system is self built just over a year ago, to my knowledge has been running fine, without any hardware issues. I'm prepared to do a clean install if that's what it takes but if there is a way to fix the partition problem without that I'd like to explore it first.
"Missing operating system" massage is coming when i start my system and i am not able to start. I think because , i had given "mark partition as active" option for one hard dive (E) in disk management when last time i opened. it did not have any data. i did not know, this will make any problem. Now i am not able to boot windows re installation dvd also. i can only take BIOS settings.
View 6 Replies View RelatedI have a WIN -7 system with 1 trig SADA hard drive. I also have a Vista system with a 750mb hard drive from my old computer.Can I install the Vista hard drive into the Win-7 system and boot from either system?
View 1 Replies View RelatedWould it be possible to download (My Documents) from my XP 32 bit system to a flash drive and load it in my Win.7 64 bit system?
View 3 Replies View RelatedUsing preinstalled Win 7 Home Premium 64bit on an HP 6813w Pavilion. The original hard drive, a Hitachi HDS721010CLA332 1Tb crashed.1) System Recovery discs was made along with a System Recovery with System Image disc.2) A more current System Image was made on an external hard drive.The Hitachi was replaced with the same model. Checked bios to make sure it was installed correctly.Under System Recovery, Image Restore, Select a System Image Backup there is nothing in the table to choose from as far as a source (disc drive or external drive).A) System Recovery (3 discs) has the HP preinstall file folder on the 3rd disc but is not read by the System Recovery program.B) Under System Restore, Image Restore, Advanced, it asks for a network or driver to be installed. That opens up the directory of C: which is the external hard drive. Under WindowsImageBackup the computer name is identified followed by three entries:[CODE]It seems to me the Recovery and System Restore discs are not functional. Am not a technical person but I have taken this as far as I know how at this point.Printed out all the instructions from HP and Microsoft to follow step by step but the failed discs will not allow me to move forward.
View 2 Replies View RelatedI had the brilliant idea to delete the manufacturer's recovery partition on my ASUS Win 7 64-bit laptop, and reclaim that space for my C drive, and now my system is unbootable. I get the error message "autochk program not found" then stop: c000021a Fatal System Error. I have run System Recovery several times to no avail. I tried to do a repair using the Win 7 DVD, but that didn't work either.
View 9 Replies View RelatedLiving is south FL can be a bitch when the rains come as there often is a ton of accompanying lightening that plays havoc with the electrical system, even though I have surge protectors inside and outside the house. We just had some very heavy rains with lightening and my computer shut down several times, but I could restart it each time...except for the last time when Windows wouldn't startup. At that point, Start Up Repair came into play. Although I routinely backup on an external drive, of course I never did it this month-DUH!Results from SUR were error free (error code=0x0) on all the parameters tested, however there were the following error codes reported:"Unspecified change to the system configuration might have caused the problem." Failed: 0x1fRepair Action: System FilesFailed: x490There were more options to select for a recovery task, but I didn't try them as they didn't seem to be as salient as the two above.
View 6 Replies View Related"Missing operating system" massage is coming when i start my system. I think because, i had given "mark partition as active" option for one hard dive (E) in disk management when last time i opened. it did not have any data. i did not know, this will make any problem. Now i am not able to boot windows re installation dvd also. i can only take BIOS settings.
View 2 Replies View RelatedI want to have a Factory Reset of my computer. In order to launch a System Recovery, I need to create Restore Discs. When I launch the Recovery Disc Creation, it says:"This computer does not have a burning drive, which is required to make DVDs. Please contact HP Support for asistance."My computer did not come with a build in CD Drive. Even plugging in a USB CD Drive will not make creating the discs possible. So. I ask you. How can I reset my computer to Factory Condition?
Computer Specs:
Windows 7 Home Premium (64-Bit)
Model: HP Pavillion dm3 Notebook PC
edit: This notebook came with a Recovery Partition built in.
I am looking to upgrade my desktop from an xp to 7. System builders are very cheap which concerns me. What is the difference from a system builder and the regular version.
View 4 Replies View RelatedI want to make a recovery disc to reset my entire 4 partition dual boot hard drive back to its current state. the recovery would reset both xp and win 7 which i have dual booting. can i make one single image to do this without it screwing up my boot loaders etc? what should i use? 3rd party software?
View 9 Replies View RelatedDid a system restore in Windows 7 and my dual boot system (Windows 7&XP) won't boot. It's looking for a boot device. When I put in a Hiren boot 10.6 disk, the dual boot option is one of a number of alternatives, and it allows me to get into my pc. How can I get back to having the system work like it did before? So it boots to the dual boot option without Hiren.My SSD drive is the main drive for Windows 7 &XP. It has two partitions.
View 1 Replies View RelatedHow to Automatically Create A System Restore Point at Startup ?
View 0 Replies View Related
