One XP Computer On Network Cannot Access Windows 7 Computer
Jan 15, 2013
I've got a total of six computers on my network - 2 running Windows 7 and 4 running XP. With the exception of one computer, all of the machines see each other on the network and can share files. One XP machine does not see the shared folders of my new Win 7 machine but does list it as a "workgroup" computer. When I try to access the computer itself I am prompted for a password. Passwords are turned off on the Win 7 machine and none of the other computers on the network get prompted for passwords to access this computer. I assumed that it was due to the setting on the Win 7 machine but they are all set for sharing with everyone on the network. Passwords are off. Firewall is off as well. The network name is consistent across all the machines. I've been unable to find any information on why just one computer on the network would be prompted for a password to access another computer on the network.
I just purchased a new computer with Win 7. All my other computers have XP or Vista and I can share files but the Win7 computer cannot open files on the Vista but can open files on the Xp computer. None of the other computer can open files on the Win 7. All are on the same workgroup and can see the Win 7 but not open. I have enabled all file sharing that I can find.
I have a small home network set up with 4 PCs (1 laptop & 3 desktop). I can see all my computers in my networks but I cannot connect to one of my desktops using my laptop. All the other computers/laptops can read and transfer files without a problem except for the laptop connecting to one of the PCs.
Both the laptop and the PC that is asking for a network password are on the same version of Windows 7 Home. I have file and printer sharing enabled. All are on the same workgroup. I have firewall off and I have turned off password protected sharing yet when I try to connect or print from my laptop to the one PC it asks for a password and I can't figure out why.
This only started recently a week ago. Prior to that never had this problem and shared files/printer without a problem
I have Windows 7 to the point now where I can access computers on our network but they cannot access the Windows 7 computer. Our XP PC sporadically can see our Windows 7 computer but that's all, it doesn't see the network printer connected to it. I've named and renamed the printer, added XP drivers to Windows 7 and I'm completely baffled at this point. (I have the firewall off on the Windows 7 PC). So far I'm not thrilled with Windows 7 and hope they don't attempt to release it anytime in the near future, my computers and network has always setup easily and ran flawless with XP and Vista but with Windows 7 it's been a battle all the way.
how to access my desktop that is on my Homegroup. When I try to access my desktop from my laptop I get asked to "Enter Network Password". The password I used for my router and my homegroup are both not working and I tried changing my homegroup password without avail.
Can I just completely turn off the homegroup password? On both computers I have opted to turn off password protection for the network but it doesn't seem to change anything.
BTW, I can access my laptop via my desktop but just not vice versa.
I have tried to find user guides but nothing seems to help. I can't even leave the homegroup on my laptop which I find weird.
I have 3 computers running Windows 7 Ultimate x64.
I connect them to a hub and set a workgroup name. Everything is working fine. All of them are able to see each other and access their shared drives.
However, once I unplug internet line (all computers still connect to the same hub), computer cannot see each other and cannot access shared drives anymore. Also, workgroup name is changed to 'Unidentified Network'.
What should I do to connect to a network without internet connection?
i have 3 computers - a laptop (vista wireless), a home theater pc (win 7 wireless) and my main computer (win 7 wired) with all my media files.i have a network setup and the laptop and the HTPC can connect to each other when i click their icons in network neighborhood. i can also connect to them from my main computer (QUAD-CORE) but if i try to hit the QUAD-CORE icon on the laptop or the HTPC i get - network path not found. if i type 192.168.1.100 it connects perfectly (i can see all my shared files so i don't think there is a problem with the way i have shared the files) i think my problem is that when i click on the QUAD-CORE icon it is looking for the ip address but something is broken.
I have a hp compaq laptop and am able to use the wireless internet connection..however I also have a Dell Inspiron notebook, a few days ago I lost internet connection on the dell but the HP was still connected. I have contacted my internet provider and they say there are no connection problems and all is fine. They think the problem is on the dell unit. I have tried disabling and enabling the Lan and wireless network connection. The system recognizes the wireless router but wont connect to it why and what can I do.
For some reason my router and modem will not show correctly on my dell inspirion one desktop. Im running windows 7 and here are the net work connection deatils
Connection -specific DNS Belkin Description Realtek PCIe GBE Family Controller Physical Address 00-00-00-00-00-00 DCHP Enabled Yes Ipv4 Address 192.168.2.2 Ipv4 Subnet Mask 255.255.255.0 Lease obtained Wednesday, November 10, 2010 9:45 PM Lease Expires Sunday, December 18, 2146 4:17 AM IPv4 Default Gateway 192.168.2.1 Ipv4 DHCP Server 192.168.2.1 Ipv4 DNS Server 192.168.2.1 IPv4 WINS Server NetBIOS over Tcpip enabled Yes
The Connection was working about ten days ago and then suddenly stopped and read as an unidentified network no internet access. at one point is was not receiving packets but now it is but it still says no internet access on the IPv4 Connectivity. Media state is also enabled and the speed is 100.0 Mbps when i troubleshoot it says windows cant identify problem but in the details it says default gateway is available. when i use the cmd prompt ipconfig/all my local ethernet adapter has a physical address of all zeros.
but i had a desktop windows 7 with some hidden files.I was getting a new laptop (macbook, to dualboot mac osx/windows 7)I got an external HDD and copied my old windows 7 files that i needed.Transfered them onto my macbook.All of my files i can access besides the ones that were "Hidden" on my old desktop.(Windows 7 desktop)I was just curious how i can have access to these files.
I can't access any programs. I have a dell optiplex gx280, 1 gig ram, intel 4cpu 2.40 ghz 2.29ghz. I think I have a virus, but can't access any programs at all, I get a window that says "Choose the program you want to use to open this file:" I can't even open my anti virus software or even get on the internet.
I have a windows 7 os on my main pc and xp pro on my laptop. when i try to access files on my main pc (windows 7) from my xp pro laptop I get asked for a user name and password. Yet when I do it the other way round I have full access with out any password ect. I have not set up any passwords and have tried my home group password but not got any joy. I have 2 other laptops both running windows 7 and have no problems networking between all windows 7 systems. all computers are running norton firewall and are configered the same.
I have two computers running Windows 7 and both belong to a Homegroup. From one computer I can access both computers and from the other I can't access the other. It say's I don't have permission but I gave it everyone permission when I shared it. I can't figure out why?
I have an old hard drive with a ton of pictures and other irreplaceable files on it from a computer I had few years back. In case it makes any difference, the computer that hard drive originally was in ran Windows XP Pro.I recently got a new computer, with Windows 7 and had the hard drive put into this new computer, along with the hard drive that came in the computer.I can get to the drive itself, but when I try to access folders or files, either access is denied or folders which should contain more folders, are empty. I have tried changing the permission and ownership options on the drive, but no luck.
computer #1: windows 7 hpcomputer #2: windows xp proI managed to lan cable connect and share folders/files between 2 windows 7computers. And the same between 2 windows xp computers.Then I wanted to lan cable connect and share folders/files between a windows 7 hp and a windows xp pro computerI tried for hours, running the same settings in circle.At a point it worked. But I don't know why it suddenly worked.The difficult thing was, to make the network icon appear on "the other computer".Do you have a detailed step by step manual, on how to config settings in
I use Windows 7 Pro on our company LAN. I had to connect temporarily to another computer on the LAN to access some file shares there. Now I would like to disconnect. I haven't found any way to do this.
I have 4 computers. Two with Windows 7 and Two with XP Pro. My XP machines can access all the others including the Windows 7's. One of my Windows 7 computers can access all but one of the XP machines. All computer workgroups are the same and all the names are correct. Any ideas why one of my Windows 7 machines can't access one of my XP machines? All are hardwired thru a router, not wireless.
I have Windows 7. My computer keeps crashing I have written down the stop codes, which are all different each time Also keep getting nv7ddmKm.sys.I have scanned the computer with Kapersky and also malwarebytes but both scans are clean.I can be doing anything on the computer when it happens but mainly it is when i am using Adobe CS5 or uploading images onto my computer from Nikon software installed on the computer.
Playing with my new laptop i entered the fingerprints. Till here is everything working fine. But now I got the app of 'LOGMEIN'. They ask the access code to my computer which I never entered. What I can do to change finally the boring 'fingerprint' situation and to enter in a regular way to my computer?
I put a new hard drive in my ThinkPad T500 and installed Windows 7. I put the old hard drive, which has Vista installed into an external USB box. I can mount the drive, but there are some folders that I can't access. I also cannot seem to give "Everyone" access, or to take ownership. Is there some simple way to override the NTFS security settings?
but I have a big issue!!! I can't access anything on my PC only the internet it says I do not have permission to access it. Does it with everything Files foldors music pictures I can't even go onto My Computer or Control panal to changed permission!
i have a printer that is currently set up with a windows 7 machine and i am trying to add it as an option a windows xp machine. as far as i know i have allowed "sharing." on the xp machine when i go to add printer... i can see the one i want to add but when i click on it i see an "error: access denied" message in the margin of the window.when i double click on it, a login window shows up and i've tried the login credentials for this computer as well as the xp computer.the printer is a samsung scx-4521f
I remote desktop to my work computer from my home computer. After finishing, I disconnect the remote desktop session without logging off the work computer.When I go to work, my work computer is powered on but the screen is black. Jiggling the mouse or CTRL ALT DEL does not make the screen come alive.
whenever i start up my computer, windows seems to disable both my sound and network drivers, so everytime i start my computer i have to go into device manager and disable, then enable my network controller (for the internet) and my creative soundblaster card so they start working again.This is very annoying, also the time it takes for my computer to load is ridiculous, what could be wrong, do i have a virus?
I'm using Windows 7 Ultimate with a 6-core AMD processor, 16GB RAM, SSD as primary. Whenever I transfer a large file over the network to another system the mouse and other applications will persistently hang for a second here and there as long as the transfer is in progress. I'm sending 8-10GB files over from the secondary 2TB 5400RPM drive and no resources are showing as maxed out so I don't get it. I'm thinking of trying a 3rd party file transfer solution again, but this still shouldn't be happening with the default.
There are now several ways of locking a computer to block things like internet surfing during a specific time period. I have unfortunately found a problem. All that one needs to do to defeat these programs is to change the system time. I use Kaspersky which allows blocking applications from operating. Is the system time controlled by an accessible software so that it could be blocked from being changed?
I am using Win 7 Ultimate 32 bit I open Set program access and computer defaults (Start/defaults program/set program access and computer defaults), chose the custom and stick to change to the program I want to use. But when I close the window and open it again => nothing change I have try to turn off the UAC but still can not change in this function?What can I do to change it?
My idiot self put a password on my computer to protect it temporarially, then by gods sense of humor the computer shut down through loss of pwer. But the password didn't save correctly and now I can't get on my account. It's the only user, and whenever I try using safe mode with command prompt, it goes to the user log in screen, which defeats the purpose.In short, I need to reset my passdword, while not being able to log on in any way through the username. I would rather not have to wipe my harddrive, I have no recovery disc, nor partition for some reason. If I have to I will wipe my harddrive then download Windows 7 again, but I need to know how to do that first.