I remote desktop to my work computer from my home computer. After finishing, I disconnect the remote desktop session without logging off the work computer.When I go to work, my work computer is powered on but the screen is black. Jiggling the mouse or CTRL ALT DEL does not make the screen come alive.
View 3 RepliesI have been tring to setup my dvr to be able to access my security cameras from a remote location, but have not had much luck. My present problem is when I try to log into my DVR locally, using my lab top, the web service page that comes up does not look normal. There is a message that reads THIS WEB PAGE IS IN CHINESE. There is a translate button on the far right of the screen but when I click it nothing happens. To access the DVR I put the IP address of the DVR into the address bar. I have tried both wired and wireless.I do have a desktop that is hard wired to the same netgear router that the DVR is wired into and I can access the DVR locally from it with no problem.
I am tring to get the labtop to access the DVR locally before I take it out to try to access the DVR from a remote location.Notes: I just got this Wireless Netgear router a few days ago. My old router was a linksys (not wireless).. I got this Labtop from my daughter. It is about four yrs old. Running windows 7 on labtopRunning XP on desktop. I am thinking this might be an activeX problem but not sure.I am still a little green on windows 7. I went in and enabled all of the activeX options. I did this while talking to a tech from netgear
This might be a silly question, but I'm having a terrible time trying to access files on the host machine (Windows 7) through the command prompt within the Virtual Machine (XP). I can see the drives in Explorer (e.g. C on VAULT_CORE_I&) and I see sclientc in the prompt, but I have no idea how to access the drive from the prompt.
I'm trying to help out a colleague who runs an old FORTRAN compiler and does alot of his engineering calcs with it, and would not work in Windows 7 (but it is working in XP Mode). However, I'd like to keep the files on his Windows 7 machine and not contain them inside the virtual machine.
How can i move files from my host computer to my guest computer?
In the VPC 2007 i could drag them from host to guest but that isn't working now, or i'm doing something wrong.
I am currently hosting an HTML site off of my computer. I recently created another site using WebMatrix. It was much easier then writing code in notepad.So I used a handy tutorial I found (Create an ASP.NET website from scratch) and created the beginning of a CSHTML site. Now I am trying to host it from my computer and am getting very frustrated with how difficult this is.I have installed MySQL and have a easyPHP working with it. I find it very disheartening that I can view the site when I hit run but cannot actually host it. Currently I use no-ip.com for my website and do not have any complaints. Really all I want to do is swap the current files with the new ones and walla my new site is up and running.
View 9 Replies View RelatedI have just installed Windows 7 32 bit on a computer with is hosting a HP Laserjet 1600 printer to which I would like to print to from my laptop running Windows 64 bit. I have added the network printer from the host machine but it won't print. Both systems File and Printer sharing is turned on in the advance sharing settings for both computers and I can share files OK. I have also allow Print permissions in the Security tab under the networked printer properties. However the spooled document print when I restart the Host computer?
View 8 Replies View RelatedI installed an HP C4680 all in one printer on my Windows 7 desktop. I set it up to do network sharing. A lot of my computing is done via my Macbook Pro which accesses my local network wirelessly. I configured it to do remote printing via my Windows 7 desktop.Everything's been working ok there, but yesterday I found that I can no longer printer on my local printer from my Windows 7 desktop! Even trying to print a test page yields nothing. I can still scan from the scanner, and read and write SD cards from the card reader. I tried the troubleshooting wizards. I tried delting the printer, unplugging the USB cable and plugging it in again to have it reinstalled. Still no dice. One thing that I noticed, is that when the printer is reinstalled it's named "HP Photosmart C4600 series (Copy 1)". When I try to rename it to remove the "(Copy 1)" I'm given an error saying that another printer with that name already exists. However, nothing by that name shows up on my printer list.
View 4 Replies View Relatedi had a couple off folders shared, no problem we could work in them, and all was well. But now, the folders are not accessible. Also when i look at the network, i can only see my own machine. The other machine's are not there. When i try to open my shared folders, i get this message: (keep in mind that its translated)\CLOUDAFS-HZFPCLOUD is not accessible. You may not have the permission to use this network resource. contact the server administrator if you want to know if you have access permissions. The specified server can not perform the requested operation.
View 9 Replies View RelatedI work off a Windows 7 Home Premium 64bit laptop when at home remoting into a Server 2003 R2. On the laptop I have a Epson Workforce 545 networked which won't display when I connect to the RDC. On the Local Resources tab, I have selected printers, clipboard, drives and ports on the RDC properties. Everty thing else works fine and I can see a CutePDF printer that is installed locally when connected to the RD.
I've used this setup with success on an laptop running XP just by simply ticking Printers in the Local Resources tab but can't seem to get it work with Windows 7. Does it have something to do with the port the Epson is using? If I click on Configure Port it shows it as LPR Printing. Is that relevant?
Typing the user name "administrator" automatically sets it from domain to local. My question is, is there something I can change, such as the registry or user profile so that a different account (such as larry) does the same as administrator, which is automatically change from domain to local upon typing the name in the user field?
View 1 Replies View RelatedUnder Win 7 (Home Premium 64-bit) I save login/password information for several programs, Dreamweaver 8, for example, for several sites that I manage. This worked fine for over a year after installing on win 7, but then suddenly (perhaps after a win 7 update, I don't know) that stored information disappeared and when I retype it (checking "save login/pw" ), it ALWAYS loses that information again--for other programs as well (also my email program--which is also a 32-bit program, in case that is relevant), so that I have to type the login/pw information in anew each time I restart each program. BTW, those same programs are able to save this information for those same programs on my work computer, which uses a different (32 bit) version of Win 7, and on my netbook, which also runs a lower version (Starter) of Win 7.
View 4 Replies View RelatedI'm in the midst of implementing Windows 7 Professional in a high school. Currently I'm running a Win2k3 R2 active directory where each machine has its own login. I created my cloned image and replicated it to several student computers to test. For some reason on only 1 of the machines it won't save any domain user's profile information to the hard drive in the user folder.
View 5 Replies View Relatedcan use a network router to network two desktops (windows 8) and two laptops (windows 7, xp) using wired and wireless connection, so that i can share files, printers and use remote desktop and host a basic email sever between the four computer without an internet connection if i can how would host the email sever over the router so that email can be sent between the computer i plan to use mercury mail server and have not got a router yet.
View 7 Replies View RelatedMy offline files seems to work offline all the time, even when it shows me being online. I sync most of my business files to my laptop for working at home at night. When I edit a file from my Win 7 (pro, 64-bit) laptop, then go to edit it again, I get the version I had changed, but no one else does. This is causing huge difficulty, because my employees will start working in a sales forecast spreadsheet after I reconnect to the network and supposedly sync, but they don't get the latest version. Even doing a manual sync seems to make no difference.
View 2 Replies View Relatedbut i had a desktop windows 7 with some hidden files.I was getting a new laptop (macbook, to dualboot mac osx/windows 7)I got an external HDD and copied my old windows 7 files that i needed.Transfered them onto my macbook.All of my files i can access besides the ones that were "Hidden" on my old desktop.(Windows 7 desktop)I was just curious how i can have access to these files.
View 5 Replies View RelatedI've got a total of six computers on my network - 2 running Windows 7 and 4 running XP. With the exception of one computer, all of the machines see each other on the network and can share files. One XP machine does not see the shared folders of my new Win 7 machine but does list it as a "workgroup" computer. When I try to access the computer itself I am prompted for a password. Passwords are turned off on the Win 7 machine and none of the other computers on the network get prompted for passwords to access this computer. I assumed that it was due to the setting on the Win 7 machine but they are all set for sharing with everyone on the network. Passwords are off. Firewall is off as well. The network name is consistent across all the machines. I've been unable to find any information on why just one computer on the network would be prompted for a password to access another computer on the network.
View 1 Replies View RelatedWindows cannot load the locally stored profile. Possible causes of this error include insufficient security rights or a corrupt local profile. If this problem persists, contact your network administrator.
View 1 Replies View RelatedI have 4 computers. Two with Windows 7 and Two with XP Pro. My XP machines can access all the others including the Windows 7's. One of my Windows 7 computers can access all but one of the XP machines. All computer workgroups are the same and all the names are correct. Any ideas why one of my Windows 7 machines can't access one of my XP machines? All are hardwired thru a router, not wireless.
View 6 Replies View RelatedPlaying with my new laptop i entered the fingerprints. Till here is everything working fine. But now I got the app of 'LOGMEIN'. They ask the access code to my computer which I never entered. What I can do to change finally the boring 'fingerprint' situation and to enter in a regular way to my computer?
View 1 Replies View RelatedI have just gotten MacBook Air and got it connected to my home network. Now, how can I get access to it from Windows 7 or vice versa?
View 3 Replies View RelatedI just purchased a new computer with Win 7. All my other computers have XP or Vista and I can share files but the Win7 computer cannot open files on the Vista but can open files on the Xp computer. None of the other computer can open files on the Win 7. All are on the same workgroup and can see the Win 7 but not open. I have enabled all file sharing that I can find.
View 9 Replies View RelatedI put a new hard drive in my ThinkPad T500 and installed Windows 7. I put the old hard drive, which has Vista installed into an external USB box. I can mount the drive, but there are some folders that I can't access. I also cannot seem to give "Everyone" access, or to take ownership. Is there some simple way to override the NTFS security settings?
View 4 Replies View Relatedbut I have a big issue!!! I can't access anything on my PC only the internet it says I do not have permission to access it. Does it with everything Files foldors music pictures I can't even go onto My Computer or Control panal to changed permission!
View 1 Replies View Relatedi have a printer that is currently set up with a windows 7 machine and i am trying to add it as an option a windows xp machine. as far as i know i have allowed "sharing." on the xp machine when i go to add printer... i can see the one i want to add but when i click on it i see an "error: access denied" message in the margin of the window.when i double click on it, a login window shows up and i've tried the login credentials for this computer as well as the xp computer.the printer is a samsung scx-4521f
View 6 Replies View RelatedI have Windows 7 to the point now where I can access computers on our network but they cannot access the Windows 7 computer. Our XP PC sporadically can see our Windows 7 computer but that's all, it doesn't see the network printer connected to it. I've named and renamed the printer, added XP drivers to Windows 7 and I'm completely baffled at this point. (I have the firewall off on the Windows 7 PC). So far I'm not thrilled with Windows 7 and hope they don't attempt to release it anytime in the near future, my computers and network has always setup easily and ran flawless with XP and Vista but with Windows 7 it's been a battle all the way.
View 6 Replies View Relatedhow to access my desktop that is on my Homegroup. When I try to access my desktop from my laptop I get asked to "Enter Network Password". The password I used for my router and my homegroup are both not working and I tried changing my homegroup password without avail.
Can I just completely turn off the homegroup password? On both computers I have opted to turn off password protection for the network but it doesn't seem to change anything.
BTW, I can access my laptop via my desktop but just not vice versa.
I have tried to find user guides but nothing seems to help. I can't even leave the homegroup on my laptop which I find weird.
I can't access any programs. I have a dell optiplex gx280, 1 gig ram, intel 4cpu 2.40 ghz 2.29ghz. I think I have a virus, but can't access any programs at all, I get a window that says "Choose the program you want to use to open this file:" I can't even open my anti virus software or even get on the internet.
View 2 Replies View RelatedI've only used VMs for testing known apps, development work and testing OSes.How safe are they from infecting the host with a virus? Normally I use a seperate computer or i switch harddrives and boot up to another drive, so there is no chance for a virus.
View 2 Replies View RelatedThere are now several ways of locking a computer to block things like internet surfing during a specific time period. I have unfortunately found a problem. All that one needs to do to defeat these programs is to change the system time. I use Kaspersky which allows blocking applications from operating. Is the system time controlled by an accessible software so that it could be blocked from being changed?
View 4 Replies View RelatedI am using Win 7 Ultimate 32 bit I open Set program access and computer defaults (Start/defaults program/set program access and computer defaults), chose the custom and stick to change to the program I want to use. But when I close the window and open it again => nothing change I have try to turn off the UAC but still can not change in this function?What can I do to change it?
View 2 Replies View RelatedI need to access Computer Configuration in order to navigate to User Rights. Does anyone know how to access Computer Configuration?
View 6 Replies View Related