Using Windows 7 To Locally Access DVR?
Dec 24, 2012
I have been tring to setup my dvr to be able to access my security cameras from a remote location, but have not had much luck. My present problem is when I try to log into my DVR locally, using my lab top, the web service page that comes up does not look normal. There is a message that reads THIS WEB PAGE IS IN CHINESE. There is a translate button on the far right of the screen but when I click it nothing happens. To access the DVR I put the IP address of the DVR into the address bar. I have tried both wired and wireless.I do have a desktop that is hard wired to the same netgear router that the DVR is wired into and I can access the DVR locally from it with no problem.
I am tring to get the labtop to access the DVR locally before I take it out to try to access the DVR from a remote location.Notes: I just got this Wireless Netgear router a few days ago. My old router was a linksys (not wireless).. I got this Labtop from my daughter. It is about four yrs old. Running windows 7 on labtopRunning XP on desktop. I am thinking this might be an activeX problem but not sure.I am still a little green on windows 7. I went in and enabled all of the activeX options. I did this while talking to a tech from netgear
View 9 Replies
ADVERTISEMENT
Mar 26, 2011
I remote desktop to my work computer from my home computer. After finishing, I disconnect the remote desktop session without logging off the work computer.When I go to work, my work computer is powered on but the screen is black. Jiggling the mouse or CTRL ALT DEL does not make the screen come alive.
View 3 Replies
View Related
Oct 9, 2012
Typing the user name "administrator" automatically sets it from domain to local. My question is, is there something I can change, such as the registry or user profile so that a different account (such as larry) does the same as administrator, which is automatically change from domain to local upon typing the name in the user field?
View 1 Replies
View Related
Apr 8, 2012
I installed an HP C4680 all in one printer on my Windows 7 desktop. I set it up to do network sharing. A lot of my computing is done via my Macbook Pro which accesses my local network wirelessly. I configured it to do remote printing via my Windows 7 desktop.Everything's been working ok there, but yesterday I found that I can no longer printer on my local printer from my Windows 7 desktop! Even trying to print a test page yields nothing. I can still scan from the scanner, and read and write SD cards from the card reader. I tried the troubleshooting wizards. I tried delting the printer, unplugging the USB cable and plugging it in again to have it reinstalled. Still no dice. One thing that I noticed, is that when the printer is reinstalled it's named "HP Photosmart C4600 series (Copy 1)". When I try to rename it to remove the "(Copy 1)" I'm given an error saying that another printer with that name already exists. However, nothing by that name shows up on my printer list.
View 4 Replies
View Related
Jul 20, 2011
i had a couple off folders shared, no problem we could work in them, and all was well. But now, the folders are not accessible. Also when i look at the network, i can only see my own machine. The other machine's are not there. When i try to open my shared folders, i get this message: (keep in mind that its translated)\CLOUDAFS-HZFPCLOUD is not accessible. You may not have the permission to use this network resource. contact the server administrator if you want to know if you have access permissions. The specified server can not perform the requested operation.
View 9 Replies
View Related
Mar 11, 2012
I work off a Windows 7 Home Premium 64bit laptop when at home remoting into a Server 2003 R2. On the laptop I have a Epson Workforce 545 networked which won't display when I connect to the RDC. On the Local Resources tab, I have selected printers, clipboard, drives and ports on the RDC properties. Everty thing else works fine and I can see a CutePDF printer that is installed locally when connected to the RD.
I've used this setup with success on an laptop running XP just by simply ticking Printers in the Local Resources tab but can't seem to get it work with Windows 7. Does it have something to do with the port the Epson is using? If I click on Configure Port it shows it as LPR Printing. Is that relevant?
View 1 Replies
View Related
Jul 3, 2011
Under Win 7 (Home Premium 64-bit) I save login/password information for several programs, Dreamweaver 8, for example, for several sites that I manage. This worked fine for over a year after installing on win 7, but then suddenly (perhaps after a win 7 update, I don't know) that stored information disappeared and when I retype it (checking "save login/pw" ), it ALWAYS loses that information again--for other programs as well (also my email program--which is also a 32-bit program, in case that is relevant), so that I have to type the login/pw information in anew each time I restart each program. BTW, those same programs are able to save this information for those same programs on my work computer, which uses a different (32 bit) version of Win 7, and on my netbook, which also runs a lower version (Starter) of Win 7.
View 4 Replies
View Related
Jan 4, 2010
I'm in the midst of implementing Windows 7 Professional in a high school. Currently I'm running a Win2k3 R2 active directory where each machine has its own login. I created my cloned image and replicated it to several student computers to test. For some reason on only 1 of the machines it won't save any domain user's profile information to the hard drive in the user folder.
View 5 Replies
View Related
May 3, 2011
Windows cannot load the locally stored profile. Possible causes of this error include insufficient security rights or a corrupt local profile. If this problem persists, contact your network administrator.
View 1 Replies
View Related
Feb 5, 2010
My offline files seems to work offline all the time, even when it shows me being online. I sync most of my business files to my laptop for working at home at night. When I edit a file from my Win 7 (pro, 64-bit) laptop, then go to edit it again, I get the version I had changed, but no one else does. This is causing huge difficulty, because my employees will start working in a sales forecast spreadsheet after I reconnect to the network and supposedly sync, but they don't get the latest version. Even doing a manual sync seems to make no difference.
View 2 Replies
View Related
Sep 20, 2011
I have one PC running Vista (home basic), one running XP (professional) and one running Windows 7 (home basic). There is a printer connected to the Vista box, which is shared.
On the XP box I can both see and use the printer on the Vista box (i.e. a "net view \vistabox" shows the printer, and under "printers and faxes" I can install and use it).
On the Windows 7 box, however, I can see the Vista box (i.e. a "net view" shows it in the list of available PCs on the network) but a "net view \vistabox" gives me an "access denied" error.
The Windows 7 machine has a password on it, the Vista and XP machines don't. All machines are on the same workgroup name (which is "WORKGROUP"). On the XP box I don't need a password to access the shared printer on the Vista machine; it just works.
Extensive Googling has failed to render enlightenment, nor has browsing this forum. I'm sure it has something to do with security and passwords, somewhere, somehow, but I have no idea in which direction to look for it, let alone fix it. I have also read some things about workgroups and homegroups not being the same in Windows 7, but I'm not sure if this is correct (and if so, relevant).
View 3 Replies
View Related
Feb 22, 2012
I am attempting to access an application.exe file on my desktop. Each time that I click on it the Windows message, "Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item." pops up. I am the system administrator so this should NOT be a problem but apparently many out there are dealing with this as well. I can delete, move and even copy the file but I cannot run it. There is no option for override with password or grant permission. It just says that I cannot run it. Also, the system I am running is Windows 7 Ultimate x64.
View 8 Replies
View Related
Mar 4, 2011
I have a Dell Inspiron 545s Desktop - Intel Duo Core 2.93, 6gb RAM, 720gb HD, 64bit Windows 7
I get the message: (every time I try and open a folder on my c/drive - Can't access Windows Explorer folder on the taskbar and any other folder or file by double clicking it. I can open them by right clicking, then open)
"this file does not have a program associated with it for performing this action. Please install a progra or, if one is already installed, create an assocation in the Default Programs control Panel".
I can open applications. But, I can not open the folder for them lets say in c:/program files -- the only way to open them is by rightclicking, then open. If I double click, I get the above error message. (same issue with "my documents", "My pictures", etc).
Included with the above problems: I now, can not access User Accounts. When I go into Control Panel, click User Accounts.. I can not manage existing ones, nor can I "Add or remove user accounts". I click the link and nothing happens.
I have someething built into the computer called "Dell DataSafe Backup". Its a recovery partition/part of the HDD that saves all my files for a recovery. However, I can NOT access it. I click the "Dell DataSafe" in my taskbar and nothing happens..
View 2 Replies
View Related
Nov 10, 2011
Last night I was on the internet at home absolutely fine and my laptop automatically downloaded an update, since then I have been unable to connect to my wi-fi. I deleted the updates and was still unable to connect, so I tried to used a system recovery restore point and every one I use starts but fails to complete.So, I did a factory reset after around 8 hours of trying to sort it out today and I STILL have the same problem. I can plug in the cable to connect and my housemate is having absolutely no issues connecting and neither is my phone so now I am at a total loss what I should do to resolve this. Prior to the factory reset I was able to connect to the wi-fi but it was stating no network access/limited access and now it simply won't connect to my internet at all. It finds my full strength signal but will not connect.My drivers for the Broadcom 4313 802.11b/g/n card are the most up to date and the laptop (HP G62) says it is working fine.
View 2 Replies
View Related
Nov 25, 2010
Are there any Access database dudes that know if using taskkill.exe to close access (to close a database at night so it can compact) is a bad thing to do? I need to have my database closed at night and I always forget, taskkill.exe works, but my colleague, who designed the database, says that force quitting access breaks the database.
View 5 Replies
View Related
Feb 19, 2012
This question may not be what you think it is. I am trying to fix an intermittent issue in my home environment. The issue is I am having to use wireless. Our Xfinity Cable/WAP modem sits on the top floor of our house. I am located in the basement. The wireless signal I get most of the time is very good, and by very good i mean at least 15+ mb/s on [URL]
I am taking the Cisco Network Academy classes and am familiar with network terminology and concepts. However, what I'm trying to do is take a router/WAP (using it downstairs where I'm located) and configure it to access our xfinity modem upstairs, so that I can plug in to it downstairs using a RJ-45.
Let me know what yall think. By the way the router/wap i would be using is a netgear model unknown at this moment but could easily find out.
View 4 Replies
View Related
Apr 23, 2012
i have my (main) desktop hooked up with mapped folders which my two other computers (laptop wireless and wired and desktop wired) can access and do what i intended them to with sharing restrictions, etc.However, my 2nd laptop that after a struggle connecting it to the homegroup will not allow access to any mapper folders keeps popping up with a login screen for THAT laptop, and my others will not connect to it properly.
View 2 Replies
View Related
Apr 14, 2012
i kept security to c drive now i cant change it
View 1 Replies
View Related
Dec 9, 2011
Recently, a "Limited Access" signal has been coming up beside my internet access signal, even though it's got full access and the wireless connection is fine .
View 4 Replies
View Related
May 11, 2012
I created a guest account. I didn't wan't the d drive accessable to the guest account. Some how I now can't access d drive at all.
View 1 Replies
View Related
Oct 13, 2011
According to what I've read, Access 2010 uses the same database format as Access 2007. So this should mean I can open and run a 2007 database (with a lot of VBA code) in Access 2010 with no trouble, yes?So why do I have the feeling that something is not going to work? Is it because I have been through to many Access upgrades?
View 4 Replies
View Related
Aug 31, 2009
I haven't really had any issues since I first installed Windows 7 and now I'm trying to access a shared drive over a network and I'm getting this annoying error message that I cannot access a shared drive over the network.
I decided to reinstall Windows 7 and before that I never had this issue.
I have not installed any third party software, I've enabled network discovery and right now I cannot access any shared folders or drives, at all, though it can see it.
I'm getting that stupid error message: "<Network drive> is not accessible. You might not have permission to use this network resource. Contact the administrator of the server to find out if you have access permissions. Access is denied."
What am I doing wrong here?
View 1 Replies
View Related
Oct 2, 2012
laptop so I reformatted his laptop and when I try to to connect to the internet via WiFi I could connect but I would have limited access. I can connect to the internet with my old laptop, iphone and xbox. But I cant connect to my newly reformatted laptop
View 9 Replies
View Related
Jan 27, 2013
i removed authentication, system and user permission to access the drive in security in properties.now iwant to apply them ut cant find security tab in properties.
View 1 Replies
View Related
Jun 9, 2009
Why is it that I can do anything to my Xp laptop shares from Windows 7 but Xp asks for a username and password to access Win?
Am I supposed to know what this username and password is? Did I create a username and password while not paying attention?
I've turned off password protected sharing in advanced sharing settings, turned on file and print sharing, both computers are joined to WORKGROUP. I went through the file sharing setup wizard on Windows 7 which spat out a password at the end but like so what? There's no username to go with it and it doesn't work if you enter that password from Xp anyway.
Can someone please put me on the right track here?
I hope that MS realise that there's an ocean of idiots like me that just want to copy a file from PC A to PC B at home and that the wizard should set all this up for us and not make us google around for half an hour just to find out how to copy a file from box to box. Unless it's intentionally not backward compatible?
View 7 Replies
View Related
Jun 18, 2011
I wanted to create a new user with standard access and only give them access to my "C:" (programs) and not my "D:" (downloads) so after creating the user, I went to security settings under D: drive/properties and I denied "Authenticated Users". I obviously know now that that wasn't the right thing to do. After that happened, my admin account didn't have access to drive D. So I went back and switched it back to "Allow/full control" and my admin acct has access to my D drive now but there are files that are in the drive (not in folders) that are still showing denied when trying to open and 1 folder is also being denied. When I see the security settings on these files/folder it says "You do not have permission to view/edit...etc"
View 1 Replies
View Related
Oct 4, 2011
[code] I never had this issue on Windows Vista, occasionally my internet will randomly dropout. Limited Internet Access". When it does I can do a few things to get it working again:
- Disable, then enable my wireless card and reconnect.
- Uninstall the card, then re-install and reconnect.
- Disconnect from the internet myself and reconnect.
Either way it gets super frustrating. There is 1 other computer plugged directly into the router that does not experience any issues. In addition, I have 1 laptop (windows 7) that works great and 1 laptop (Windows XP) which works great.
View 1 Replies
View Related
Dec 29, 2009
I have a brand new acer aspire notebook and I'm trying to connect to my airport extreme card built into my iMac desktop. The laptop sees the signal just fine, but it will not connect to the Internet and I get "limited access". What can I do to connect?
View 1 Replies
View Related
Jul 13, 2011
i'm trying to connect 2 laptops via ad hoc so that i could share the internet the server computer is a xp sp 2, the client is the default 7 starter of my laptop.the ad hoc seems to be fine, and i can share files between them, but win 7 can not access the internet and says "no internet access"
View 6 Replies
View Related
Oct 4, 2011
First things first, these are my computer specs[CODE]
View 2 Replies
View Related
May 28, 2011
I've networked a new Win 7 PC with my old XP one. I shared a drive on the latter.My Win7 PC can see the XP PC on the network, but when I click on it, I get this error:[XP PC name] is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.Logon failure: the user has not been granted the requested logon type at this computer.I assume the problem is on the XP side. It has an active Guest account.The sharing tab for the drive says Windows Firewall is configured to allow it to be shared with other computers on the network.
View 8 Replies
View Related
