Network Printer Won't Print Until Host Computer Reboots?
Mar 21, 2011
I have just installed Windows 7 32 bit on a computer with is hosting a HP Laserjet 1600 printer to which I would like to print to from my laptop running Windows 64 bit. I have added the network printer from the host machine but it won't print. Both systems File and Printer sharing is turned on in the advance sharing settings for both computers and I can share files OK. I have also allow Print permissions in the Security tab under the networked printer properties. However the spooled document print when I restart the Host computer?
View 8 Replies
ADVERTISEMENT
Mar 30, 2012
My HP 6500 all in one will print test pages but will not print from my computer. It worked fine up until a week ago?
View 2 Replies
View Related
Jul 22, 2012
I have installed a HP office jet 6700 on my network my laptop Windows 7 X 32 can see the printer and print. However when I tried to install the printer on my wife's laptop I cannot get it to connect at all. The printer can be seen on the network however why I try to print nothing goes to queue. I have check spooler service and it is on.We use to have an old HP photosmart but it stopped working. I bought a HP5510 and had the same problem now I have same issue with the HP6700 and off course HP support cannot explain why this is happening.
View 9 Replies
View Related
Jan 24, 2013
I am not able to print in program(ie works, notepad ect.) to my network printer. The printer is a Kodak ESP 5250 connected via usb to my desktop cpu. Desktop is hp running win vista, laptop is an hp running Windows 7. All printer sharing is enabled. I have another laptop( aser) running Windows 7, it's hooked up the same way and it prints just fine. Here's the tricky part, I can get my hp laptop to print a test page from within the kodak program, but it won't print from within any other program. It acts like it spooled but then nothing come out.
View 2 Replies
View Related
Aug 16, 2011
I have a LAN with 2 laptops and one desktop connected. The desktop has an HP Photosmart D7160 connected via a USB port. Both laptops have had Windows 7 installed for several months. The desktop was recently upgraded from Vista to Windows 7. After the upgrade, one of the laptops will still print, but the other laptop will not. The correct printer driver has been installed on both laptops. Reinstalling the printer driver on the desktop did not help. When the desktop had Vista installed, all printing functions were fine. I suspect a network problem, but don't know how to attack it. All computers are running Kaspersky Internet Security. I have tried disabling Kaspersky on the problem laptop, but no help.
View 5 Replies
View Related
Nov 28, 2012
My computer was just updated from XP to WIn 7 and now my printer will not print envelopes. It used to automatically but now it says to change settings and when I do, it does not recognize it.
View 4 Replies
View Related
Jul 6, 2011
My PC, running 64bit Windows 7 is printing blank pages on the work computer. I downloaded the necessary drivers needed to print from this computer to the printer, which is a CanonMX 340. The computer recognizes the printer and will print, but the pages that it prints are blank. The pages are blank whether I'm printing from the internet, a saved .jpg file or even a .pdf file. In order to connect to the printer, I plug in an ethernet cable, still nothing works.
View 1 Replies
View Related
Apr 13, 2011
Vista 32-bit Host connected direct to an HP printer - works fine. Win7 64-bit laptop connected direct to same HP printer - works fine. Win7 64-bit laptop printing via Vista 32-bit host - no go.
I've tried installing the 64-bit driver on the 32-bit Vista machine. I've also tried installing the 32-bit driver on the Win7 laptop. In both cases, Windows and the HP website give me the runaround and insure me that all necessary drivers will auto-install via Plug-n-Pray. But this is not the case. Unable to find driver downloads easily.
View 4 Replies
View Related
Apr 18, 2011
I have done as you instructed. The WinXP VPC I set up can see the internet but for some reason it does not see the host Windows 7 machine. When I ping the host from the VPC I get no response. I can ping the VPC from the host machine. I intend to run the ArcInfo license of ArcGIS Desktop on the VPC. That license requires communication with a license server. The license server is running on my host machine. If I can't ping the host then I won't be able to use the license server.
I have done this on another machine with WinXP as both the host machine and the VPC and the VPC can see the host via ping.
I've turned off all the firewalls but no joy.
View 7 Replies
View Related
Jun 19, 2012
I currently have a printer connected to a computer in my room (Canon Pixma iP4300 [USB]). I also have a computer in the office which is connected to the network via a wireless extender. I am a little short of space in my room and am looking at which peripherals I can move away without too much hassle - the printer is one such thing which has a relatively large footprint and would ideally be located in the office.I am fairly confident that with a little research I could set up the printer to be shared from the office PC (Vista Home Premium x32) to other computers on the network, which would be a more suitable location for it.However, one thing that occurs to me is that it would require the office PC to be on in oder for other machines to print. Currently the office PC is set to go to sleep after a period of inactivity [20~30 minutes]. My question is, would it be possible for other computers on the network to wake this machine in order to use the printer connected to it?
View 3 Replies
View Related
Nov 7, 2009
On a laptop I just added to the home workgroup, I see the wireless printer in the folder area under network as a computer. But when I go tro Devices and printer and ask to add a new printer it searches and does not find it..
So how come it shows as a computer & not a printer? How do I get it to show as a printer..
Ps.. it is a wireless printer a Kodak esp 7
View 1 Replies
View Related
Jan 19, 2013
I have found the reverse but have yet to find this exact problem. My computer, running Windows 7 64 bit, will recognize the printer but won't let it connect to the printer. The network drive is not even seen. Both the printer and the network drive is hosted on a computer using Windows XP 32 bit.
View 4 Replies
View Related
Jun 22, 2011
I have a W7 Home Edition 64 bit and by mistake installed an old piece of hardware which over wrote my Network USB Host Controller driver. I have a disk image backup from before; I just need the name of the driver so I can install the correct one.
View 2 Replies
View Related
Apr 23, 2009
Win7 as a host for VPC - Network card not recognized. I've just installed VPC over Windows 7 7077 but on the network settings I cant choose my LAN connection, I only have the option of Shared NAT?
Is there any problem reported regarding this subject?
View 2 Replies
View Related
Nov 8, 2012
I have three virtual OS (windows 2003)installed on my server (window 2008), I can ping it from within the network but I cannot reach it from outside the network. However, I can reach the host and any other physical pc from outside the network.
I also installed VMware 5.0 on my laptop running window 7. Windows XP is on the VW. it can ping the host but the host cannot ping it. I have set it to bridge but it is still not the host cannot still ping the OS on the VM.
View 1 Replies
View Related
Oct 6, 2012
Computer can't find printer on network. Goes partway thru intall and just hangs up.
View 1 Replies
View Related
May 7, 2009
How can i move files from my host computer to my guest computer?
In the VPC 2007 i could drag them from host to guest but that isn't working now, or i'm doing something wrong.
View 7 Replies
View Related
Jul 28, 2011
I have an XP virtual machine running on a 64-bit Win 7 host. I have a home wireless network that I need to access from the XP VM in order to use printers attached to the other computers on the network. All computers currently on the network have the same workgroup name. I have networking on the VM set to use the wireless adapter on the host laptop. With this configuration I can see and access the host, but I cannot see nor access any other computers on the network.
Now, it seems to me that I will need to run the XP Network Wizard to set up the network on the VM before I am able to see the network, but after reading dozens of articles and posts on networking a VM, I have never seen this step mentioned. (I am at work now, so I can't test this out on my network until later.) So, my questions are:
(1) Do I need to run the XP Network wizard to get the VM to join the wireless network, and
(2) if I don't need to run the wizard, what DO I need to do to get this to work?
View 5 Replies
View Related
Mar 26, 2011
I remote desktop to my work computer from my home computer. After finishing, I disconnect the remote desktop session without logging off the work computer.When I go to work, my work computer is powered on but the screen is black. Jiggling the mouse or CTRL ALT DEL does not make the screen come alive.
View 3 Replies
View Related
Jul 27, 2011
I have just bought a new PC with Windows 7. Ive only had it four days and today my computer store replaced my MB cos my computer has taken to shutting down and then restarting all on its own. the problem is Ive just got it home and its doing the same thing.
View 1 Replies
View Related
May 26, 2011
I have a desktop computer AMD 3.0 ghz dual core processor, 4gb ram, win7 ultimate(legit), 1 TB HDD(new) and an asus m2n-mx se plus motherboard. every time I turn my machine on, it goes through the POST and finishes boot up sequences and then start to load windows. Some times it finishes and I get to my desktop while other times It reboots only seconds into the win7 loading procedures. this has happened for quite a while and I am beside myself for an answer. I have even flashed the ROM to update that. I have unhooked all drives except for one. I have even unhooked the DVD drive to eliminate that. still the problem is here. the only thing that I havent replaced yet is the motherboard, which I may do and get another video card and run dual video cards but I need this gremlin gone.
View 7 Replies
View Related
Jan 17, 2013
I have a GIGABYTE GA-990FXA-UD3 mother board with a phenom II x4 965 3.4 with 2 4GB PNY sticks of DDR3 ram, all of which I just got from someone. Also a NVIDIA GeForce 440 connected to it at the moment for the graphics card and a 500 watt power supply. Two hard drives are connected to it, 1TB and a 80GB I use just to run windows off of. I have windows 7 Ultimate edition installed. The power supply graphics card and hard drives come from a computer that worked perfectly, and so did the cables FYI so I doubt any of those are the issues.Upon installing windows it froze, and rebooted, multiple times until during the instillation phase and first time set up boot. When I finally got it to install I constantly got the same problem where the computer would restart or freeze when I was doing something. Some times it would freeze/reboot when I opened a program, other times when I closed a program, sometimes when I just moved the mouse. It also restarts or freezes at boot sometimes when it gets to the window logo or Gigabyte splash screen. I have tried;
Switching the power supply
Memtest
Installing windows on another hard drive (It froze during install also)
disconnecting everything and plugging it back in multiple times...
Toying with the bios settings
[code]....
View 9 Replies
View Related
Jul 27, 2011
I have just bought a new PC with Windows 7. Ive only had it four days and today my computer store replaced my MB cos my computer has taken to shutting down and then restarting all on its own. the problem is Ive just got it home and its doing the same thing
View 9 Replies
View Related
Apr 18, 2011
I am currently hosting an HTML site off of my computer. I recently created another site using WebMatrix. It was much easier then writing code in notepad.So I used a handy tutorial I found (Create an ASP.NET website from scratch) and created the beginning of a CSHTML site. Now I am trying to host it from my computer and am getting very frustrated with how difficult this is.I have installed MySQL and have a easyPHP working with it. I find it very disheartening that I can view the site when I hit run but cannot actually host it. Currently I use no-ip.com for my website and do not have any complaints. Really all I want to do is swap the current files with the new ones and walla my new site is up and running.
View 9 Replies
View Related
May 17, 2012
I'm having random crashes during general usage on my pc. Attached you will(hopefully) find bsod logs. I have run memtest already and it came back ok. I have also updated to latest nvidia drivers and it still happens.This is a nearly fresh install of windows 7 and i have loaded minimal software onto it since install a week or so ago.
View 7 Replies
View Related
May 28, 2012
Every few days , (could be 4. or 5 days) my computer rebooted by itself and I get a error code 41 kernel power, the system rebooted with properly shuttiong down. A dump file is not bering created. This started in beginning of may. Until then this never happened. This happened when windows is in low use or idle. Microsoft took control of my computer and could not find why it happens Again I am not getting a dump file to check. hard drive tesr--wiith Hdd reginator and check disk no problems?memory test no problem?cpu test by intel softeware diagnostic tool no problem and cpu is cool?test with asus al suitee and cpu temp is 32c and system temp is 31c? virus check with kaspersky and no virus
windows 7 64 bit
malibastes free software
superanitspyware free software
kaspersky internet security
i7 processor, asus motherboard,
2 teribite hard drives,850 corsair watt power supply
h50 cpu cooler, 12 gig 1600 speed balastic memory,
evga gtx460 1gb exhaust ddr 5 memory
creative xfi extreme gaamer sound card
View 1 Replies
View Related
Jun 9, 2012
So my computer starts out logging on, sometimes it'll take a long time on the splash screen, sometimes it'll freeze on the splash screen, but now more recently, it's just gotten to the splash screen, not turned off, and restarted itself back to the start screen. It comes up with the problem of Windows not shutting down properly and asks for system repair or normal startup, but system repair doesn't help at all because it gets to the background screen and system repair doesn't pop up.
View 4 Replies
View Related
Aug 22, 2012
My Computer shuts down and reboots almost daily, possibly about 2 - 3 times a day.The event viewer system log shows the following error each time
[code]...
This appears to be a random event, It will happen while I'm working in Word 07 pro, browsing the internet, or even while the computer is idle.I've attached the reports from the SF Diagnostic tool.Please assist me in finding a solution on this ASAP, this is a business computer and can't have it constanly going down, especially while in the middle of a meeting with clients.
View 1 Replies
View Related
Mar 27, 2012
why is that my does not print when i order
View 1 Replies
View Related
Jan 4, 2013
Yesterday I left my pc running, and when I came back, found a black screen.Rebooting, I came across some random characters in the POST and also in BIOS, after which, the same black screen. I googled this, removed the video card and the bios and post look normal now( i use the onboard video), but when trying to load windows, the pc reboots.I tried system repair, chkdsk. When trying to boot in safe mode, it loads up to "AtiPcie.sys", then reboots.
View 11 Replies
View Related
Jan 13, 2013
My window 7 updates will not install after the computer reboots after saying it is installing i get updates failed. I talked to techguru guys online and they said that I had many corrupt files and wanted $119.00 to fix it one time or $299. for a two year contract. While they were remotely using my computer I could see the corrupted 32 bit files in the registry. I dont know if this was true or if it was the reason that the updates do not install. and they said the corrupted files are replicating and will crash my computer.
View 6 Replies
View Related
