My computer was just updated from XP to WIn 7 and now my printer will not print envelopes. It used to automatically but now it says to change settings and when I do, it does not recognize it.
View 4 RepliesI have just upgraded the 8 pcs in my office from XP Pro to Windows 7 Pro 32bit and I've encountered printer sharing issues. I have a local mono laser connected to my PC by USB. I've shared this and others have been able to add the printer and on occasion print to it, it usually works when they want to print text to A4 but when they want to do labels or envelopes they usually sit in the queue and don't print. This is not an issue we had on XP and the document templates haven't changed. I don't think it is an issue with the printer (I've replaced it with a new one to make sure), I don't think it is an issue with the documents. I think it is an issue with Windows 7 and was wondering if there is a known issue or fix. The computers are connected over a domain not workgroup.
View 7 Replies View RelatedPrinter will not print from ie8, but will print from Oprea or firefox, have updated latest drivers but still will not print.
View 1 Replies View RelatedMy HP 6500 all in one will print test pages but will not print from my computer. It worked fine up until a week ago?
View 2 Replies View RelatedI'm running Word 2010 on Windows 7 x64. I've merged addresses in an Excel workbook to an envelope document using the standard mail merge wizard. I'd like to print these 10 at a time since that's all I can fit in my printer's feed tray. I click on Finish & Merge and then Print Documents and enter the range to print. Regardless of the starting record I enter, it always starts printing from the first record. I'm using an HP CP2025 Color LaserJet.
View 1 Replies View RelatedI have just installed Windows 7 32 bit on a computer with is hosting a HP Laserjet 1600 printer to which I would like to print to from my laptop running Windows 64 bit. I have added the network printer from the host machine but it won't print. Both systems File and Printer sharing is turned on in the advance sharing settings for both computers and I can share files OK. I have also allow Print permissions in the Security tab under the networked printer properties. However the spooled document print when I restart the Host computer?
View 8 Replies View RelatedMy PC, running 64bit Windows 7 is printing blank pages on the work computer. I downloaded the necessary drivers needed to print from this computer to the printer, which is a CanonMX 340. The computer recognizes the printer and will print, but the pages that it prints are blank. The pages are blank whether I'm printing from the internet, a saved .jpg file or even a .pdf file. In order to connect to the printer, I plug in an ethernet cable, still nothing works.
View 1 Replies View Relatedi have no sound on my comp updated to win7 and lost sound
View 2 Replies View RelatedYesterday I installed some updates on my computer and when I restarted it, it was different. Its resolution was older, like from Window 2001. I cant uninstall anything or use any of the programs that I used to use with Windows 7. I can only use my computer.
View 3 Replies View RelatedMy Dell Windows 7 now cannot print or add a new printer. When I try I receive a message" Windows can not add printer the local spooer service is not running. Please restart the spooler or restart the machine." Been on services and trying other things with out a printer.
View 14 Replies View RelatedI have a Windows 7 Home Premium 64 bit computer which I will call the main PC. An HP LaserJer is directly connected to it, and shows up as the default printer. About a month ago, it stopped responding to print jobs. They show up in the "jobs pending" list, but do not print. If I try to print to that printer from another PC on the network, the document shows up in the pending list, but then says "Error" and will not print either.If I connect the printer to a different PC, it will print. If I try to print to the printer connected to another PC from the main PC, it will not print. The print spooler is running. There are only restore points from the past week or so, and this started happening over a month ago
View 2 Replies View RelatedI have a HP PSC 3550 connected to my Mac and I have successfully added this printer to Windows 7.
I am able to print a test page from Windows 7. I am able to print from Openoffice. However, I cannot print from Wordpad or Notepad.
This is the event log entry:
The document Untitled - Notepad, owned by Mark, failed to print on printer \MACS-COMPUTERHP PSC 2350 series. Try to print the document again, or restart the print spooler. Data type: NT EMF 1.008. Size of the spool file in bytes: 1184. Number of bytes printed: 0. Total number of pages in the document: 1. Number of pages printed: 0. Client computer: \SEGO. Win32 error code returned by the print processor: 0. The operation completed successfully.
Note that if I connect the printer directly to my Windows 7 machine I can print from Wordpad and Notepad.
Some of our office computers will not print to our networked printer and the message says "toner low - offline". Other computers can print to the printer at the same time with no problem.
View 4 Replies View RelatedWhen I built this computer back in the dark ages of 2007, I set it up to dual-boot Vista and XP. Every time I powered on, I'd get a prompt to boot into Vista or "older version of Windows," meaning XP. I'd pick one and go on my merry way. In 2011, I formatted the Vista drive, installed Windows 7, and deleted the XP install since I had XP mode in 7 if I needed compatibility. No more dual-boot prompt. I had no issues until last night, when I went shopping for a new hard drive. My motherboard, a Gigabyte GA-P35-DS3L, was running an old BIOS that has problems with drives of 1 TB or more. So in order to be sure I could use the drive I'm buying, I updated the BIOS to the latest revision, using Gigabyte's @BIOS utility to do it in-OS rather than through the boot menu.
When I rebooted, the system POSTed fine. But instead of booting Windows, it gave me the old choice between Vista or the "older version of Windows" - despite neither of those operating systems being present. If I tell the boot manager to do anything, it spits out an error since it can't find any OS files it recognizes. The BIOS itself seems to be fine - I'm writing this on the affected computer, running Ubuntu with a Live CD. I can see all the hard drives, open files, etc. I just don't know how to get the boot manager pointed at Windows 7 again.
Last night I set my computer to defragment my hard drive, forgetting that earlier that day I had enabled automatic updates due to a university policy that forces you to enable automatic updates to access the internet. Needless to say, my computer rebooted to update in the middle of defragmentation. Everything seems to be in working order so far, but is there any precaution I should be taking before attempting to defragment again, such as checking for any disk errors? If so, how would I do that? And of course I'll disable automatic updates this time. The program I was using for defragmenting was Defraggler.
View 2 Replies View RelatedI am not able to print in program(ie works, notepad ect.) to my network printer. The printer is a Kodak ESP 5250 connected via usb to my desktop cpu. Desktop is hp running win vista, laptop is an hp running Windows 7. All printer sharing is enabled. I have another laptop( aser) running Windows 7, it's hooked up the same way and it prints just fine. Here's the tricky part, I can get my hp laptop to print a test page from within the kodak program, but it won't print from within any other program. It acts like it spooled but then nothing come out.
View 2 Replies View Relatedhp deskjet 3550 unable to print in windows 7
View 2 Replies View Relatedwhy is that my does not print when i order
View 1 Replies View Relatedi have 3 desktop..two PC is having a win7 32bit and the other one is 64bit..i install the printer LX-300+II(dot matrix) on the 64bit win7...then of course the three desktop is on a network...the 32bit win7 is the admin..then the 64bit win7 and the 32bit admin can print on the dot matrix..but the other 32bit cannot..both of those 3 desktop are shared..workgroup name is same..sharing properties is same for both 32bit..and both 32bit can connect to the printer and can detect..when i tried to print its just qeue and comes with the word "spooling"..but when i tried printing on a laser printer it prints..but on the dot matrix it cannot print...
ways i tried:
1.check the port/ethernet the UTP cables plug out plug in and wait like around 20 secs. then connect again.
2.reinstall the driver on the 32bit that doesnt print.
3.remove device then add printer again.
4.did a windows update.
5.check if same workgroup.
6.check if shared and with same location and can access both 3 desktop.
7.check the permissions.
8.restart the computer.
9.troubleshooting the printer.
10.make sure there's a network connection.
IP address doesn't have because its a USB port and not suported by the OS..3 desktop on a network...two 32bit win7 one win7 64bit.32bit and 64 bit can print on the dot matrix and laser printer but the other 32bit cannot print on the matrix but can print on the laser..when printing its just qeue with spooling..
I got a new computer powered by Windows 7 which was upgraded to Win 7 Pro. I have it attached to a Xerox Phaser 8400 printer. The printer will not print in color when i use the word pad or Print Master software. It's own self test it prints color so I assume there is a setting I can't find.
View 14 Replies View RelatedI've just taken delivery of a new windows 7 PC, with i5-2500k/8gb/SSD/1TB HDD, Asus p8z68-v lx motherboard. Everything was going fine with setting up until it came to printers.I have 3 printers connected - Brother HL2030 laser, HP Photosmart D6160 and Epson Stylus photo R2400 - and NONE of them will work. All three came up with "your device is installed correctly etc etc" message. I can't print documents or even a test page. I've downloaded and installed Brother's W7 driver - zilch. HP site says you lose most of the functionality of toollbox etc but "the windows 7 default driver should work" - it doesn't. Likewise the Epson. I've tried 3 or 4 times to reinstall them all, deleting each first from the control panel, and absolutely no joy.I'm sure I must be doing something wrong but can't figure
View 10 Replies View RelatedI recently got a new computer with Windows 7 and installed the printer driver for the HP 1018 printer, and it prints from word, excel, pdf, etc., but it will not print from the Internet. It just prints blank pages.
View 2 Replies View RelatedSuddenly (two years since Windows 7 was installed), the printer will not print a document. However, printer (H-P Laser 6P) WILL print test page. The steps I followed are:
[code]..
I have set up two Windows 7 computers,- (A) & (B) (A) has the printer attached. What is the easiest way to enable the printer to print from System B
View 4 Replies View RelatedI have installed a HP office jet 6700 on my network my laptop Windows 7 X 32 can see the printer and print. However when I tried to install the printer on my wife's laptop I cannot get it to connect at all. The printer can be seen on the network however why I try to print nothing goes to queue. I have check spooler service and it is on.We use to have an old HP photosmart but it stopped working. I bought a HP5510 and had the same problem now I have same issue with the HP6700 and off course HP support cannot explain why this is happening.
View 9 Replies View RelatedComputer #1 - Dual boots with XP Pro SP3 and Windows 7 RC1 7100 with Konica Monolta 2400W printer attached via USB and shared.
Computer #2 - Windows XP Pro SP3.
Computer #2 Sucessfully installed networked printer and prints normally when Computer #1 is booted to XP. When computer #1 is booted to Windows 7 it automatically detects and installs networked printer once network was correctly setup but gets error message when trying to print.
HP Deskjet printer won't print with USB on new PC. Prints fine with parallel cable on old PC. Why won't it print now with a new PC using USB connection? I have a new USB cable.
View 2 Replies View RelatedI have an E Machine PS and my old Z12 printer will not print
View 2 Replies View RelatedMy HP930c printer won't print in colour. Was working OK till I elected to print something in black and white. I have ticked the colour box under Preferences and clicked OK. I have tried two brand new HP original colour cartridges and still it won't print a test page or a document in colour.
View 6 Replies View RelatedMy printer will only print one copy when I select 2 copies
View 1 Replies View RelatedHP deskjet 2050 print/scan/copy (not an all-in-one; about two months old.New color cartridge installed and alignment page is ok.Greyscale is turned OFF.Only get black& white prints.....
View 2 Replies View Related