Z12 Printer Wont Print
Nov 20, 2011I have an E Machine PS and my old Z12 printer will not print
View 2 RepliesI have an E Machine PS and my old Z12 printer will not print
View 2 RepliesMy HP 6500 all in one will print test pages but will not print from my computer. It worked fine up until a week ago?
View 2 Replies View Relatedwhy is that my does not print when i order
View 1 Replies View Relatedi have 3 desktop..two PC is having a win7 32bit and the other one is 64bit..i install the printer LX-300+II(dot matrix) on the 64bit win7...then of course the three desktop is on a network...the 32bit win7 is the admin..then the 64bit win7 and the 32bit admin can print on the dot matrix..but the other 32bit cannot..both of those 3 desktop are shared..workgroup name is same..sharing properties is same for both 32bit..and both 32bit can connect to the printer and can detect..when i tried to print its just qeue and comes with the word "spooling"..but when i tried printing on a laser printer it prints..but on the dot matrix it cannot print...
ways i tried:
1.check the port/ethernet the UTP cables plug out plug in and wait like around 20 secs. then connect again.
2.reinstall the driver on the 32bit that doesnt print.
3.remove device then add printer again.
4.did a windows update.
5.check if same workgroup.
6.check if shared and with same location and can access both 3 desktop.
7.check the permissions.
8.restart the computer.
9.troubleshooting the printer.
10.make sure there's a network connection.
IP address doesn't have because its a USB port and not suported by the OS..3 desktop on a network...two 32bit win7 one win7 64bit.32bit and 64 bit can print on the dot matrix and laser printer but the other 32bit cannot print on the matrix but can print on the laser..when printing its just qeue with spooling..
I got a new computer powered by Windows 7 which was upgraded to Win 7 Pro. I have it attached to a Xerox Phaser 8400 printer. The printer will not print in color when i use the word pad or Print Master software. It's own self test it prints color so I assume there is a setting I can't find.
View 14 Replies View RelatedI've just taken delivery of a new windows 7 PC, with i5-2500k/8gb/SSD/1TB HDD, Asus p8z68-v lx motherboard. Everything was going fine with setting up until it came to printers.I have 3 printers connected - Brother HL2030 laser, HP Photosmart D6160 and Epson Stylus photo R2400 - and NONE of them will work. All three came up with "your device is installed correctly etc etc" message. I can't print documents or even a test page. I've downloaded and installed Brother's W7 driver - zilch. HP site says you lose most of the functionality of toollbox etc but "the windows 7 default driver should work" - it doesn't. Likewise the Epson. I've tried 3 or 4 times to reinstall them all, deleting each first from the control panel, and absolutely no joy.I'm sure I must be doing something wrong but can't figure
View 10 Replies View RelatedI recently got a new computer with Windows 7 and installed the printer driver for the HP 1018 printer, and it prints from word, excel, pdf, etc., but it will not print from the Internet. It just prints blank pages.
View 2 Replies View RelatedSuddenly (two years since Windows 7 was installed), the printer will not print a document. However, printer (H-P Laser 6P) WILL print test page. The steps I followed are:
[code]..
I have set up two Windows 7 computers,- (A) & (B) (A) has the printer attached. What is the easiest way to enable the printer to print from System B
View 4 Replies View RelatedI have installed a HP office jet 6700 on my network my laptop Windows 7 X 32 can see the printer and print. However when I tried to install the printer on my wife's laptop I cannot get it to connect at all. The printer can be seen on the network however why I try to print nothing goes to queue. I have check spooler service and it is on.We use to have an old HP photosmart but it stopped working. I bought a HP5510 and had the same problem now I have same issue with the HP6700 and off course HP support cannot explain why this is happening.
View 9 Replies View RelatedComputer #1 - Dual boots with XP Pro SP3 and Windows 7 RC1 7100 with Konica Monolta 2400W printer attached via USB and shared.
Computer #2 - Windows XP Pro SP3.
Computer #2 Sucessfully installed networked printer and prints normally when Computer #1 is booted to XP. When computer #1 is booted to Windows 7 it automatically detects and installs networked printer once network was correctly setup but gets error message when trying to print.
HP Deskjet printer won't print with USB on new PC. Prints fine with parallel cable on old PC. Why won't it print now with a new PC using USB connection? I have a new USB cable.
View 2 Replies View RelatedMy HP930c printer won't print in colour. Was working OK till I elected to print something in black and white. I have ticked the colour box under Preferences and clicked OK. I have tried two brand new HP original colour cartridges and still it won't print a test page or a document in colour.
View 6 Replies View RelatedMy printer will only print one copy when I select 2 copies
View 1 Replies View RelatedHP deskjet 2050 print/scan/copy (not an all-in-one; about two months old.New color cartridge installed and alignment page is ok.Greyscale is turned OFF.Only get black& white prints.....
View 2 Replies View RelatedMy printer suddenly stopped printing and each time I give the command to print, the response I get is that I should instal a printer.
View 1 Replies View RelatedI've recently updated from windows xp to windows 7 professional.I cannot get the cd print facility on the printer to work.epson are not able to provide a solution apart from buying a new printer.
View 4 Replies View RelatedMy problem is that I had to have a new wireless modem installed from ATT it is a 2wire892. I ran a wireless network test and it still has the old network name on it. I have a hp c4500 series all in one printer. Tried reloading everything and nothing. I also have another laptop that is a Acer Travelmate c310, windows xp service pack 3 on it. They both show the printer and I can hit the print button, the printer will just not print from the wireless computers. [code]
View 4 Replies View RelatedI have an Epson Artisan 725 which prints on CD/DVD and is network connected. Inoticed a few days ago that this device can not print 3X5 cards. In addition, it can not print on 3 hole paper. Was wondering if I was missing some setting, or if Epson has abandoned this type of format. If Epson has abandoned it, that is a real shameas 3X5 cards are the most popular index card out there.
View 4 Replies View RelatedMy Dell Windows 7 now cannot print or add a new printer. When I try I receive a message" Windows can not add printer the local spooer service is not running. Please restart the spooler or restart the machine." Been on services and trying other things with out a printer.
View 14 Replies View RelatedI have a Windows 7 Home Premium 64 bit computer which I will call the main PC. An HP LaserJer is directly connected to it, and shows up as the default printer. About a month ago, it stopped responding to print jobs. They show up in the "jobs pending" list, but do not print. If I try to print to that printer from another PC on the network, the document shows up in the pending list, but then says "Error" and will not print either.If I connect the printer to a different PC, it will print. If I try to print to the printer connected to another PC from the main PC, it will not print. The print spooler is running. There are only restore points from the past week or so, and this started happening over a month ago
View 2 Replies View RelatedI have a HP PSC 3550 connected to my Mac and I have successfully added this printer to Windows 7.
I am able to print a test page from Windows 7. I am able to print from Openoffice. However, I cannot print from Wordpad or Notepad.
This is the event log entry:
The document Untitled - Notepad, owned by Mark, failed to print on printer \MACS-COMPUTERHP PSC 2350 series. Try to print the document again, or restart the print spooler. Data type: NT EMF 1.008. Size of the spool file in bytes: 1184. Number of bytes printed: 0. Total number of pages in the document: 1. Number of pages printed: 0. Client computer: \SEGO. Win32 error code returned by the print processor: 0. The operation completed successfully.
Note that if I connect the printer directly to my Windows 7 machine I can print from Wordpad and Notepad.
Trying to print to a printer connected to my mac. It has been done in the past with a different laptop running vista but I cannot get it setup with my new HP running Windows 7. I have installed the printers drivers, and tired using Bonjour to setup the printer. I get an error message regardless if I use the cannon drivers or Generic drivers. anyone have a way to set this up???
View 3 Replies View RelatedI have re-installed my printer 4 times, it takes forever to load anything that needs printed......even the programs.All other programs open quickly and work as always. I have an epson artisan 700 that when you open any program to print with, just takes forever.......I have spent a whole day trying on my own, to no avail.I have even did 2 earlier restore points, which were successful? I am at my wits end, cannot wait 5-8 minutes to print out just 1 page.
View 2 Replies View Relatedmy printer will only print A5?
View 1 Replies View RelatedI have a PIXMA MG3150 printer and don't know how to get it to print over the wifi. I use windows 7. I'm not great with technology.
View 1 Replies View RelatedWe recently bought a new computer w/windows7 and installed a HP 4500 wireless printer and had it up and running.Came in today and it won't print at all wireless. Updated the Adobe 10.1 and still not printing?
View 4 Replies View Relatedwhy is that my printer does not print and have it drivers installed
View 2 Replies View RelatedThe power light to printer will not come on and can't print anything
View 2 Replies View RelatedGot windows 7 on new computer and need to install a printer = generic print to file, generic text. It installs but does not print when try a test page or document. get error message "can not open" IT goes through all the steps correctly and shows up as a printer but doesn't work. Tried the trouble shooter but nothing.
View 3 Replies View RelatedI printed a test page and I have plenty of color ink. Checked Properties, level is fine, but I still can't get color from a jpg on PhotoShop??
View 2 Replies View Related