Printer Drivers Unable To Print In Windows 7
Jun 28, 2011hp deskjet 3550 unable to print in windows 7
View 2 Replieshp deskjet 3550 unable to print in windows 7
View 2 RepliesI've just taken delivery of a new windows 7 PC, with i5-2500k/8gb/SSD/1TB HDD, Asus p8z68-v lx motherboard. Everything was going fine with setting up until it came to printers.I have 3 printers connected - Brother HL2030 laser, HP Photosmart D6160 and Epson Stylus photo R2400 - and NONE of them will work. All three came up with "your device is installed correctly etc etc" message. I can't print documents or even a test page. I've downloaded and installed Brother's W7 driver - zilch. HP site says you lose most of the functionality of toollbox etc but "the windows 7 default driver should work" - it doesn't. Likewise the Epson. I've tried 3 or 4 times to reinstall them all, deleting each first from the control panel, and absolutely no joy.I'm sure I must be doing something wrong but can't figure
View 10 Replies View RelatedPrinting's been working fine up until about a week ago. Suddenly I'm unable to print out of chrome. Whenever I try to print I get an error that says "Printer not Installed" in the browser. I disable the "print preview" chrome has recently implemented but that doesn't work. I reinstall Chrome to no avail. I try to print in Firefox and get a different error... "An Error Occurred while Printing." I do some research and then realize I can't print out of Acrobat Pro. My print settings dialog in Acrobat is unlike any I've ever seen and no options work. I can't change the paper size or access the printer settings from the Acrobat Print Dialog.
Steps I've taken so far:
Reinstalled the printer
Restarted Print Spooler
Deleted the Port
Reinstalled Printer again with new drivers
Successfully Printed Test Pages after each of these steps. Still could not print out of other programs.
Successfully Printed out of MS Word
I logged in under a different user and was able to print out of firefox.
why is that my printer does not print and have it drivers installed
View 2 Replies View RelatedPrinter will not print from ie8, but will print from Oprea or firefox, have updated latest drivers but still will not print.
View 1 Replies View RelatedI had no problem installing my venerable HP LaserJet 4100DTN as a shared network printer in Win 7 Pro 64. However, when checking install additional drivers for 32 bit windows, 7 would not accept the PCL 6 inf, downloaded from HP, which is the same driver version that has been installed on my 32 bit XP Pro PC's. Also tried PCL 5, with same result. Message is the selected driver isn't appropriate for the selected architecture.
View 3 Replies View RelatedMy HP 6500 all in one will print test pages but will not print from my computer. It worked fine up until a week ago?
View 2 Replies View RelatedI've been using various print drivers for various locations with success for a month with my new laptop. Today, all drivers gone.Loading new ones doesn't work. Print spooler is not "started;" it starts successfully, then is not "started" next time I look.Other possibly relevant information: HP 1020, HP MX 340 at home office.Tried: multiple restarts of print spooler, multiple reboots, troubleshooters, HP detect and download drivers?
View 5 Replies View RelatedMy Mom has an HP laptop. She recently purchased a new HP printer and I have been trying for the last 4 days to get it to install/connect. I've been in touch with HP but the links they provide aren't resolving the issues. First, using the CD that came with the printer: hangs up at around 85-90%. It doesn't not show up as installed. I copied the CD to the desktop, modified Setup.exe in CFFExplorer and Run as Administrator and it appears to completely install; however, when I go to Device Manager, it says no driver is found.
I sometimes have the option to update and sometimes that seems to work but I can't access it through Add a Printer (which has the green bar run across the top, then pulsate and freeze). Trying to install using the driver I download from HP results in no installing screen appearing but it does hang up in the background and the only way to stop it is to Restart. The same thing happens if I try to use HPs Wizard. I've installed several HP printers through the years and not had this much trouble. That doesn't even include the dozens of times I've had to reinstall my own HP printer because of its contrariness!
Additionally, attempts to uninstall the old printer results in it hanging up/freezing soon in to the process, whether I try to uninstall from the Start menu, file or Uninstall program. I'm not even being able to get the Windows Updates to install - that process also just hangs up/freezes. I've not checked her machine in a while so there are many updates; however, when I just choose 1 at a time, it still sits at 0% and never moves. The printer, when connected, is with the USB and I've tried all 4 USB ports on this just in case. Am still in touch with HP but they are sending me the usual links so I'm hoping perhaps someone here can think of something a little less ordinary!
I am unable to print after using Windows Fax and Scan. I get the message saying that it can not access the documents folder.
View 2 Replies View RelatedI'm using Win 7 Pro logon as user with administrative credential. I need to do printing in DOS mode. The Case is : I type Net Use LPT1: \printserverp1 in DOS mode, it displays the command completed successfuly. The connection was made when I look at it again by using net use. But when I send a command 'dir/w > lpt1 ' in dos mode, it shows access is denied. It doesn't allow me to send a print job
View 2 Replies View RelatedI have a MacBookPro with OSX 10.6.8 and a Toshiba laptop with Windows 7 to which is connected by USB a Canon MP250 printer. I have been able to network the two computers, meaning I am able to create a file on the Mac and save it on the Toshiba and vice-versa. But I am unable to print a document from the Mac on the Canon printer which is connected to the Windows laptop. I think I correctly followed instructions here.
View 3 Replies View RelatedI've been trying to print from the Windows 7 XP Mode, with no success. How do I set up the Win7 XP Mode so I can print from it. I have a Laserjet 1320 printer. It prints fine from Windows 7.
View 12 Replies View RelatedMy Dell Windows 7 now cannot print or add a new printer. When I try I receive a message" Windows can not add printer the local spooer service is not running. Please restart the spooler or restart the machine." Been on services and trying other things with out a printer.
View 14 Replies View RelatedI have a Windows 7 Home Premium 64 bit computer which I will call the main PC. An HP LaserJer is directly connected to it, and shows up as the default printer. About a month ago, it stopped responding to print jobs. They show up in the "jobs pending" list, but do not print. If I try to print to that printer from another PC on the network, the document shows up in the pending list, but then says "Error" and will not print either.If I connect the printer to a different PC, it will print. If I try to print to the printer connected to another PC from the main PC, it will not print. The print spooler is running. There are only restore points from the past week or so, and this started happening over a month ago
View 2 Replies View RelatedI have a HP PSC 3550 connected to my Mac and I have successfully added this printer to Windows 7.
I am able to print a test page from Windows 7. I am able to print from Openoffice. However, I cannot print from Wordpad or Notepad.
This is the event log entry:
The document Untitled - Notepad, owned by Mark, failed to print on printer \MACS-COMPUTERHP PSC 2350 series. Try to print the document again, or restart the print spooler. Data type: NT EMF 1.008. Size of the spool file in bytes: 1184. Number of bytes printed: 0. Total number of pages in the document: 1. Number of pages printed: 0. Client computer: \SEGO. Win32 error code returned by the print processor: 0. The operation completed successfully.
Note that if I connect the printer directly to my Windows 7 machine I can print from Wordpad and Notepad.
Some of our office computers will not print to our networked printer and the message says "toner low - offline". Other computers can print to the printer at the same time with no problem.
View 4 Replies View RelatedI am not able to print in program(ie works, notepad ect.) to my network printer. The printer is a Kodak ESP 5250 connected via usb to my desktop cpu. Desktop is hp running win vista, laptop is an hp running Windows 7. All printer sharing is enabled. I have another laptop( aser) running Windows 7, it's hooked up the same way and it prints just fine. Here's the tricky part, I can get my hp laptop to print a test page from within the kodak program, but it won't print from within any other program. It acts like it spooled but then nothing come out.
View 2 Replies View RelatedHI'm using windows 7 home premium,I have a samsung ML 1660 laser printer installed and set as default.Now over the last day or two I'm unable to print out my emails from Windows live mail,Its been working well.Did a system restore to try a fix also tried microsoft Mr Fixit but no luck. Also when I look in devices and printers folder it shows up the printer with a tick showing default,Then beside that there is a greyed out printer of the same with 'copy 1' underneath it. I also had a box popping up on screen ''Script error''Yellow triangle'top left. Line 2107 Char 1 error Invalid procedure call or argument Code 0 URL:res//ieframe.dll/preview.js..Do you want to continue running scripts on this page YES NO.
View 6 Replies View RelatedMy computer was just updated from XP to WIn 7 and now my printer will not print envelopes. It used to automatically but now it says to change settings and when I do, it does not recognize it.
View 4 Replies View RelatedI'm unable to print in either Outlook 2003 or Internet Explorer with Windows 7. I've tried 3 different printers. Same problem. All other programs seem to print fine.
View 1 Replies View RelatedI have just upgraded the 8 pcs in my office from XP Pro to Windows 7 Pro 32bit and I've encountered printer sharing issues. I have a local mono laser connected to my PC by USB. I've shared this and others have been able to add the printer and on occasion print to it, it usually works when they want to print text to A4 but when they want to do labels or envelopes they usually sit in the queue and don't print. This is not an issue we had on XP and the document templates haven't changed. I don't think it is an issue with the printer (I've replaced it with a new one to make sure), I don't think it is an issue with the documents. I think it is an issue with Windows 7 and was wondering if there is a known issue or fix. The computers are connected over a domain not workgroup.
View 7 Replies View RelatedI wasn't quite sure where to post this so I'll put it here My mother bought a cooking ebook, in PDF format and in 7 parts. They came with a password to view which is understandable, but printing is restricted.My mum doesn't really think taking her laptop in the kitchen is a very practical method of reading it, and so naturally she asked me to try and find a way around this restriction. As I said I have the password to actually open the PDF and it was all legitimately acquired so I don't see the problem in asking a question of this nature.
View 9 Replies View Relatedwhy is that my does not print when i order
View 1 Replies View RelatedI am not able to print from my Laptop which is having Windows 7 Home Premium 64bit. I am trying to connect HP LAserjet P1102 printer.
View 3 Replies View RelatedI have an old printer (Brother 1430) attached to my new PC running windows 7 via the LPT1 port. It works well in Windows 7 but I am unable to print from XP mode.
I have installed the drivers into XP mode and it seems to be recognised by XP but no luck with printing. Have tried a USB connector but again no success.
I am an avide genealogist and use Ancestry and Find my Past as research sites, I have been using these sites for a number of years and been able to print from these sites certificates etc that I have found in my research. Of late I have experienced an anoying problem in that I cannot print these any more from the screen shot, if I save the screen as a file to a folder I am able to open the files and print from the file.
I know that both these sites use Djview as a viewer for viewing the files from their sites, but if I can view them surely I should be able to print.
i have 3 desktop..two PC is having a win7 32bit and the other one is 64bit..i install the printer LX-300+II(dot matrix) on the 64bit win7...then of course the three desktop is on a network...the 32bit win7 is the admin..then the 64bit win7 and the 32bit admin can print on the dot matrix..but the other 32bit cannot..both of those 3 desktop are shared..workgroup name is same..sharing properties is same for both 32bit..and both 32bit can connect to the printer and can detect..when i tried to print its just qeue and comes with the word "spooling"..but when i tried printing on a laser printer it prints..but on the dot matrix it cannot print...
ways i tried:
1.check the port/ethernet the UTP cables plug out plug in and wait like around 20 secs. then connect again.
2.reinstall the driver on the 32bit that doesnt print.
3.remove device then add printer again.
4.did a windows update.
5.check if same workgroup.
6.check if shared and with same location and can access both 3 desktop.
7.check the permissions.
8.restart the computer.
9.troubleshooting the printer.
10.make sure there's a network connection.
IP address doesn't have because its a USB port and not suported by the OS..3 desktop on a network...two 32bit win7 one win7 64bit.32bit and 64 bit can print on the dot matrix and laser printer but the other 32bit cannot print on the matrix but can print on the laser..when printing its just qeue with spooling..
I got a new computer powered by Windows 7 which was upgraded to Win 7 Pro. I have it attached to a Xerox Phaser 8400 printer. The printer will not print in color when i use the word pad or Print Master software. It's own self test it prints color so I assume there is a setting I can't find.
View 14 Replies View RelatedI recently got a new computer with Windows 7 and installed the printer driver for the HP 1018 printer, and it prints from word, excel, pdf, etc., but it will not print from the Internet. It just prints blank pages.
View 2 Replies View RelatedSuddenly (two years since Windows 7 was installed), the printer will not print a document. However, printer (H-P Laser 6P) WILL print test page. The steps I followed are:
[code]..