On a laptop I just added to the home workgroup, I see the wireless printer in the folder area under network as a computer. But when I go tro Devices and printer and ask to add a new printer it searches and does not find it..
So how come it shows as a computer & not a printer? How do I get it to show as a printer..
I'm looking into purchasing a new printer. However, the one I am interested in only has up to wireless G. I'm just looking for some opinions. Do you believe I'd be better off with one that has wireless N?
I we have a wireless network. all systems have xp windows. we have a printer hp laserjet 1320 that is installed on PC 1. i have a laptop connceted to that wireless network. i want to add the printer that is intsalled on PC 1. when i go to add printer, a list appear, i select the pc and go to add, but it ask for driver, when i put cd of the drivers, it dont find the driver and it shows me a message the "windows cant find the printer"
I have an HP desktop running Windows XP Pro and I network to an HP notebook through a wireless router.I recently purchased a Gateway Laptop with windows 7 Home Premium. It found my wireless router immediately and I was able to get on the net. It also found my HP desktop so I could share files.The problem I am having is with my network printer. It is an older epson stylus photo r320. Epson says that windows 7 has a driver for this printer and if I plug the printer directly into the laptop using the usb connection wiindows 7 finds the printer no problem. If I try and have windows 7 locate the printer on the network it can't find it.
I have a Macbook Pro that I just loaded a clean install of Windows 7 home 64 bit using bootcamp. I also have a canon printer. I loaded the printer's software in Windows, using a USB cable connected directly to the computer. The printer prints fine. But normally I have the printer connected to an Apple Airport Express wireless network, which prints fine from the Mac side of the computer. Windows see's the Airport Express wireless network and it connects to it fine. But when in Windows and I try to print a document, it can't see the printer. The printer says it is offline. How do I make Windows locate the printer?
I am on a Verizon FIOS wireless network. We have both a Toshiba and Sony computer. I downloaded the latest drivers for my HP Photosmart 6280 printer and was able to successfully install my printer wirelessly. However, no such luck with my Sony. I download the same drivers, and it goes through part of the installation, but at some point I get a message that 'the system cannot find the file specified', and then it rolls back the install, deleting the download.
So I have wireless internet in my house through an xfinity cable/internet modem. While I was trying to set up my new printer on the wireless network, my wireless stopped working. My computer is showing it has a full signal from my wireless network, however it unable to connect. Also, if I connect my computer via ethernet cable the internet works without a problem. Also, my 3 other roommates can no longer connect to the wireless and nothing was done with their computers. I've tried unplugging the modem and plugging it back in after 30 seconds as recommended, but nothing changed.
I have a canon printer (couple years old) and a Brothers printers connected to a computer with Vista 32bit. I just purchased a laptop that has windows 7 64bit. I can connect via wireless network to my Vista computer just fine. I was able to connect to and install the brother printer but when I try to install the canon printer I get a message something like this "Cant find INI file, will look in windows update" after a while it comes back and says It can find INI file. Probably it is because my Vista is 32 bit and my laptop Windows 7 64bit. But I did not have this problem with my brother printer. How do I install the canon printer?
For some reason my router and modem will not show correctly on my dell inspirion one desktop. Im running windows 7 and here are the net work connection deatils
Connection -specific DNS Belkin Description Realtek PCIe GBE Family Controller Physical Address 00-00-00-00-00-00 DCHP Enabled Yes Ipv4 Address 192.168.2.2 Ipv4 Subnet Mask 255.255.255.0 Lease obtained Wednesday, November 10, 2010 9:45 PM Lease Expires Sunday, December 18, 2146 4:17 AM IPv4 Default Gateway 192.168.2.1 Ipv4 DHCP Server 192.168.2.1 Ipv4 DNS Server 192.168.2.1 IPv4 WINS Server NetBIOS over Tcpip enabled Yes
The Connection was working about ten days ago and then suddenly stopped and read as an unidentified network no internet access. at one point is was not receiving packets but now it is but it still says no internet access on the IPv4 Connectivity. Media state is also enabled and the speed is 100.0 Mbps when i troubleshoot it says windows cant identify problem but in the details it says default gateway is available. when i use the cmd prompt ipconfig/all my local ethernet adapter has a physical address of all zeros.
I've had problems with my wireless printer going "offline" a lot and its one of the most frustrating situations when you go to hit print and theres a 35% chance it will be offline.
Now I tried to "Add a new printer" and for some reason after trying time after time my computer is not discovering my wireless printer any more?
My printer sucessfully pairs up with my router every time I try to go through the wireless setup wizard. I've restarted/unplugged the printer time & time again & also restarted the computer.
how to get my computer to see this printer again & KEEP it online?
My computer can't even find my wireless printer through the wireless router it is connected to. This is a Dell MC4 Dual Processor using Windows 7 with Internet Explorer 9. I have tried everything known to my knowledge to connect the said printer to my computer but nothing is working.
I can print from my laptop to my c7200 hp printer through the wireless on my laptop. The printer is already installed on my HP Pavilion laptop. How do I scan documents inserted into the printer and view scans on my laptop?
I am running WIN7 64 Bit, BT wireless hub. Have added a laptop (also running WIN7 64 bit) to home network and set up HP Photosmart Premium 309g printer as 'wireless'. It works a treat with the laptop but my desktop computer tells me the printer is off line.
I have a variety of wireless internet enabled devices in my house running Windows 7, Ubuntu, iPod Touch, and Android. All of them function perfectly fine connecting to my Verizon Fios all-in-one modem/router, except one. One of my Windows 7 desktop PC's can usually connect just fine, but occasionally, it decides that there is no wireless network to connect to. Randomly, the list of available networks, just blanks out, and I get the icon of the signal bars with a red X through them. When I AM connected, the connection is full, strong, and reliable.
There seems to be no rhyme or reason to when it goes away, except that it almost always seems to happen while I'm using it. I very rarely sit down to my computer to find it disconnected. Sometimes it will be off for a minute, sometimes an hour.
I have tried everything from DNS flushes to registry hacks and card drivers. I am pretty sure I have the most updated drivers for my card, and I have swapped wireless cards with other computers and the other ones work fine with this card, and it's still this PC that doesnt do so well. I do run bittorrent on the computer sometimes, but the outages do not always coincide with large downloads, or any downloads, but I have not ruled that out as a possibility.
I currently have a printer connected to a computer in my room (Canon Pixma iP4300 [USB]). I also have a computer in the office which is connected to the network via a wireless extender. I am a little short of space in my room and am looking at which peripherals I can move away without too much hassle - the printer is one such thing which has a relatively large footprint and would ideally be located in the office.I am fairly confident that with a little research I could set up the printer to be shared from the office PC (Vista Home Premium x32) to other computers on the network, which would be a more suitable location for it.However, one thing that occurs to me is that it would require the office PC to be on in oder for other machines to print. Currently the office PC is set to go to sleep after a period of inactivity [20~30 minutes]. My question is, would it be possible for other computers on the network to wake this machine in order to use the printer connected to it?
I have found the reverse but have yet to find this exact problem. My computer, running Windows 7 64 bit, will recognize the printer but won't let it connect to the printer. The network drive is not even seen. Both the printer and the network drive is hosted on a computer using Windows XP 32 bit.
A few days ago my computer (an ASUS Eee Netbook) suddenly stopped being able to connect to the wireless network in my apartment, seemingly for no reason whatsoever. It had been working fine earlier in the day, I went out for about an hour (didn't even shut the computer down), returned home and was unable to connect to the network. The computer can locate the network and continues to attempt connecting to it with no luck. I can connect to other networks without any trouble. It has never done this before. I've rebooted the computer several times and performed a System Restore, but without any success. I'm hesitant to reset the router as this is a shared connection with the other people in my apartment (who as far as I know aren't having any trouble with the connection).
Yesterday I moved into a new apartment in Vancouver, Canada. Several friends came up with me to help me move in. My friends were able to connect to the wireless network. However, as soon as I tried connecting to the network, the wireless signal began to appear and disappear rapidly for everyone connected, effectively cutting off wireless access. This problem only occurs when I sign on. Furthermore.
I recently replaced my wireless router and Bellsouth DSL modem with a single Netgear DGN2200 DSL modem/wireless router. The problem is my desktop which is wired, cannot see the laptop computers that are on the network via wireless connection. If I start a homegroup with one of the laptops, the other laptop can join but my desktop cannot (no "join now" option). If I start a homegroup with my wired desktop, neither laptop sees it.However, if I connect my desktop to the network using my USB wireless adapter, then I can establish a homegroup with either a laptop or the desktop with no problem.I have checked that IPv6 is enabled and that all the services listed in other posts are enabled. I'm fairly certain the cause is some setting in my router security, but I don't see anything that would prevent my desktop from linking. I can also get on the internet with no problem.
I have just installed Windows 7 32 bit on a computer with is hosting a HP Laserjet 1600 printer to which I would like to print to from my laptop running Windows 64 bit. I have added the network printer from the host machine but it won't print. Both systems File and Printer sharing is turned on in the advance sharing settings for both computers and I can share files OK. I have also allow Print permissions in the Security tab under the networked printer properties. However the spooled document print when I restart the Host computer?
I've had the worst luck with this HP Officejet 6500.or some reason my computer always sees it as "offlineWell the only way to get it back online is to delete the old printer & add a "New Printer" via Devices & Usually that works even though it's severely a pain in the a**!But now my computer isnt even seeing the printer at all any more to add?I've restarted my computer twice, turned on/off the printer a few times, re-synced the printer within the wireless router successfully & it still isnt showing up.I really need this up & running asap to finish my work, but I also need to get to the bottom of the problem of this stupid thing going "offline" and making me re-add a new printer.It makes using the computer so frustrating. It happens a couple of time a week maybe.
I have Windows 7 and I'm trying to connect to a wireless n router. When I look at it under available networks it says "Security Type: WEP" but my router is set for WPA. I can access it as WPA on my late 2008 macbook pro, but no matter what I do (disabling the wireless n adapter, restarting the computer, etc.) I can't get it to recognize my network as WPA and thus any password I enter is marked as incorrect.
Basically, my netbook doesn't recognize any networks despite the fact that my other netbook, laptop and iMac all do recognize the networks in the area and connect to my network without a problem. I have already tried resetting the router and all that kind of stuff. In the lower right-hand corner of the screen, where the network strength icon is, there is just a red 'X' signifying that there are no available networks. Sometimes, upon restarting the computer, it does recognize that there are networks (strength icon has the gold dot in the middle), but when I try to join my network, it says that it is unable to. Then the weird stuff happens:
I have a homegroup set up with a desktop and a latop, 2 printers which are physically connected to the desktop.When i open homegroup to see what devices are connected the 2 pc`s and the 2 printers show up but when i go to print something through the homegroup from the laptop only 1 printer shows up to print from even though both printers show up in the homegroup?
so I have a hp a910 printer connected directly via ethernet to my router. The printer shows up in my Devices & Printers, as a HP a910 network, and I have it set as my default printer. However if i go to print lets say from Word or really any application, and I print to my default it won't print, as the HP a910 shows up as offline. But if I select the "plain" HP a910 from the printer drop down menu, it will print. Why is this, and is there a way to have the "plain" HP a910 as my default printer?
Installed new hard drive and Windows 7, wireless card shows up as unknown device.I was having major stability issues with windows. I wanted a new hard drive so i installed it and a new copy of windows. The wireless worked fine before, and ethernet works fine now. It shows up in device manager as other devices, network controller with a yellow exclamation mark. I have gone to Dell to install the driver. It almost finishes then says you do not have a recognized wireless device.
My comp is a Dell Inspiron M5010, I installed windows 7 HP 64 bit same as what was on before. WHDPC, K5Y6D are the numbers I have found for the card. I have tried several different drivers and all have the same error.
how to get windows to recognize the card so the drivers I install will recognize it? There are many threads about this in various places, but none of the solutions work.