Printer Via Vista Host - No Drivers?
Apr 13, 2011
Vista 32-bit Host connected direct to an HP printer - works fine. Win7 64-bit laptop connected direct to same HP printer - works fine. Win7 64-bit laptop printing via Vista 32-bit host - no go.
I've tried installing the 64-bit driver on the 32-bit Vista machine. I've also tried installing the 32-bit driver on the Win7 laptop. In both cases, Windows and the HP website give me the runaround and insure me that all necessary drivers will auto-install via Plug-n-Pray. But this is not the case. Unable to find driver downloads easily.
View 4 Replies
ADVERTISEMENT
Mar 21, 2011
I have just installed Windows 7 32 bit on a computer with is hosting a HP Laserjet 1600 printer to which I would like to print to from my laptop running Windows 64 bit. I have added the network printer from the host machine but it won't print. Both systems File and Printer sharing is turned on in the advance sharing settings for both computers and I can share files OK. I have also allow Print permissions in the Security tab under the networked printer properties. However the spooled document print when I restart the Host computer?
View 8 Replies
View Related
Apr 16, 2011
Can i delete the host file from C Windows System 32 Drivers etc ?
View 9 Replies
View Related
Apr 26, 2011
I have installed the 32 bit driver for my Minolta 1300W. I can print happily in XP mode but I don't seem to be able to be able to use the printer in the Windows 7 host (64 bit Pro). Should I be able to see it as a printer if I attempt to print a document in Office? Launching the application doesn't help.
View 2 Replies
View Related
Apr 30, 2009
I just reformatted my desktop with 7 and I wanted to share the attached HP PSC2355 wirelessly to my Vista lappy. I had this connected and functioning previously when the desktop was running XP but now I cant seem to get my lappy to connect to the 'home-group' to find the printer. I found some other posts of sharing a printer on a vista machine over to 7 but not from 7 over to vista. Any help would be greatly appreciated.
View 3 Replies
View Related
May 24, 2009
Can someone please help me or point me to a guide on how to enable/share a printer between a Windows 7 RC and a vista system?
I have a HP printer connected to my Windows 7 RC x64 system and it prints from my computer just fine. I pulled up the settings and told it I wanted to share the printer as "Win7HP" to make the name easy. Anyway when I went down to my roomates computer I didn't see the printer and if I try to click my computer name under his network window I get a pop up asking for a user name and a PW. What am I doing wrong? I would hate to have to install another partition of Vista x64 just so he can print using my printer.
When we had things set up before he never had to "log in" from his computer to access my printer.
View 3 Replies
View Related
May 11, 2009
I downloaded Windows 7 RC 64 Bit Build:7100.0.090421-1700 x64.
After I installed it, I only had to install my wireless network drivers and Windows 7 downloaded the rest of all of my system. I did not have to install any driver at all.
My problem is when I try to print from my Vista 32 laptop nothing prints to my printer. Under active documents listed for my printer it just says under status | Error - Printing.
Under the ports tab on my Vista 32 laptop, the check is in the box [Windows 7 64][printer] | Local Port
Under the ports tab on my Window 7 64 Desktop, the check is in the box USB001 | Virtual printer port for USB
The 64 bit drivers for my printer are on the Windows 7 64 Desktop and the 32 bit drivers are on the Vista 32 laptop.
I do not know why I cannot share printing.
On Windows 7 64, share this printer is checked and Render print jobs on client computers is checked.
I know this seems to be a much talked about problem but I tried the best I could to follow the posted suggestions.
My Desktop has a Canon iP4600 printer.
My desktop's computer name is AGP-001 and the printer share name is CanoniP4.
View 9 Replies
View Related
Jan 18, 2012
I've got a printer connected by USB to a desktop running Vista and hardwired to a WiFi router and I've got a Nokia booklet running Windows 7 Starter and using the WiFi. I have tried to get the two computers to connect with each other, but only the desktop can get into the booklet. I cannot get the booklet to get into the desktop. It seems that because I only have Win Starter 7, I cannot form a home group. I need the full featured Win 7 to do that. Is that correct? I really would like to use the printer on the booklet, but even though it seems to send the document to the printer queue on the desktop, nothing prints. I suspect it's the same issue as I mentioned, but at least it's getting something into the desktop. When I try to print and then look at the document's properties, it says the size of the document but always says pages to print.
View 4 Replies
View Related
Aug 16, 2011
I have a LAN with 2 laptops and one desktop connected. The desktop has an HP Photosmart D7160 connected via a USB port. Both laptops have had Windows 7 installed for several months. The desktop was recently upgraded from Vista to Windows 7. After the upgrade, one of the laptops will still print, but the other laptop will not. The correct printer driver has been installed on both laptops. Reinstalling the printer driver on the desktop did not help. When the desktop had Vista installed, all printing functions were fine. I suspect a network problem, but don't know how to attack it. All computers are running Kaspersky Internet Security. I have tried disabling Kaspersky on the problem laptop, but no help.
View 5 Replies
View Related
Jun 12, 2011
I am running Windows 7 Ultimate and sharing a printer to other laptops running in the household using Vista and XP. I installed sp1 last weekend and then laptops stopped being able to print. Spent 3 hours on it yesterday and finally rolled back and things are now working again.I did notice that after sp1 my home group had been changed back to the "MSHOME" default. After changing it back to the exiting name, I could see the network printer and also edit files on any of the machines I had set access for. I also could set the print on the Vista release and my desktop with 7 would work just fine so no network issues. When I moved the printer back to 7, the Vista laptop would get an error while trying to load the drivers.
View 1 Replies
View Related
Aug 6, 2009
Desktop has windows 7 7100 (64 bit)
Laptop has Vista Premium (32 Bit)
Desktop has USB wired HP j6480 all in one printer shared
Cannot connect to printer from laptop unless Windows 7 has login password enabled.
Any ideas on how to share this printer when windows 7 has no password
View 8 Replies
View Related
Jul 21, 2011
I built it mainly for my 14yo to do school work and video games on rather to replace our aging desktop which is still used also. The old machine runs 32-bit Vista while the new one is 64-bit Win7, of course. In our reorganization we moved our Canon MP610 printer to be hooked up to the new machine, but it'd be great if we could share it amongst both pc's and my older son's new laptop. I've search and read lots of sites online, but can't really find a solution to get the old pc to be able to "see" the printer to share.
View 3 Replies
View Related
Mar 8, 2012
I use Windows 7 Professional 64 bit. My problem is: Whenever I try to print something (word, pdf, or any other file); printer spooler stops working and when I check the Devices and Printers all the printer drivers seem to be disappeared. I checked the Print Spooler" in the Services tool; and set the "Recovery after subsequent failures" option to Restart the Serviceā. Therefore all the printer drives coma back after 1 minute. However the spooler stops immediately again when the uncompleted printing job starts; hence I can not print anything more than a page. Earlier in this forum, someone posted that Microsoft issued a hotfix for this problem ( hotfix 2388142) which can be downloaded from article: [URL]. I downloaded this hotfix and tried to install, however it gives an error message of: The update is not applicable to your computer and quits installation. I did uninstall and reinstall all the printer drives, but this did not help either.
View 1 Replies
View Related
Jun 15, 2011
I would just like to say, I am not just posting this question anyhow. I have read around and I haven't found any solution to my problem, thus I have resorted in opening a new thread.So here is the prob:I have a Windows 7 Starter Edition netbook which is connected to a WRT54GL Wireless-G Router. This router is connected via hard wire to my Windows Vista Desktop and that is how the desktop has access to the internet. The netbook is accessing the internet the very same Router via Wi-Fi. The Printer (HP DeskJet 940c) is connected and installed on the Windows Vista Desktop and is functioning. It prints when I give it commands from the desktop. I have set the printer sharing options 'on' in the Networks and Sharing Center as well as haven't kept a sharing password (its open and unprotected). This is as far as I have gotten. My next challenge is, how can I print from the Windows 7 Starter Edition netbook on my HP Deskjet 940c via the Router.I would be very grateful if someone can explain to me in a very noob-ish way as I am not a techie. If someone could send me a video link or so.
View 1 Replies
View Related
Dec 30, 2011
Is it possible to set up a shared printer with one laptop running Windows 7 and the other laptop running Vista? I have tried setting all the required sharing settings on both units, but without success!
View 4 Replies
View Related
Apr 17, 2012
how do i share a network printer from my Windows 7, 64 pc to one running vista i have tried all the sharing settings, but when i upgraded my PC to win 7, my second pc running vista won't print anymore printer: hp officejet pro 8500ag
View 1 Replies
View Related
Oct 31, 2009
I've just updated my Acer Notebook to Windows 7. I've installed all the drivers that Acer supplies for Windows 7.
But what about the drivers that are not supplied? Should I install the ones that Acer supplies for Vista or stick with the 'pre-installed' drivers by Windows 7 ... Everything seems to work with the pre-installed ones.
And how do I check wether or not the Intel Turbo Memory is working correctly?
View 2 Replies
View Related
Jan 18, 2009
Can someone confirm whether i should use XP or vista drivers for my devices in Windows 7, i have used XP where i can so far and have had no problems?
View 6 Replies
View Related
Sep 22, 2009
Is anyone using the ATi Vista 64-bit SouthBridge drivers in Windows 7 64-bit? If so, have you noticed any improvement/degradation?
View 2 Replies
View Related
Jul 28, 2011
In general, can Vista drivers be used in Windows 7? I notice some of my equipment has drivers for Vista, but not W7. Is this because the manufacturer simply has not got around to producing W7 drivers?ermissions - Is there a way to take ownership of the entire hard drive? It seems like every time I turn around I have another folder that will not allow me to interact without changing the permissions.
View 1 Replies
View Related
Jul 8, 2009
I have a Setup CD for Vista, and if i put it to compatibility mode it installs all the drivers. But how can i know if the Drivers are working correctly?
And, my PC has low framerate in Flash Games ( When intense ), but that isn't normal is it? The flash player version is 10.
View 5 Replies
View Related
Dec 7, 2009
I currently have a HP Pavilion dv6799ep running Windows Vista Premium 32-bit, but I got a new license for Windows 7 Professional 64-bit and I would like to know if the Windows Vista 64-bit drivers will work on this version.
View 1 Replies
View Related
Dec 26, 2009
Do windows 7 support windows vista drivers? im asking this because i've got geforce fx 5200 and there is no windows 7 drivers for it. I found on google, that windows 7 supports vista's drivers fine.
View 2 Replies
View Related
Apr 9, 2009
I have a friend who has Asus with the following specs:
Proccessor: 2.0 GHz P7350
Ram: 3 gb
graphic card: nvidia 9300m gs
Can his vista drivers work on windows seven as well?
View 3 Replies
View Related
May 20, 2009
I use Windows 7 64-bit RC 7100.
I have got GF8600GT. Can I safely use Vista 64-bit nVidia drivers?
The reason I don't want nVidia drivers for Windows 7 is this:
How to REALLY set lower screen resolution?
View 3 Replies
View Related
Jan 4, 2010
I used to have Vista 32-bit on here and I recently upgraded to Windows 7 64-bit. The problem is that the Sony website doesn't release Windows 7 64-bit drivers for my model as it is only sold with Vista 32-bit.
http://esupport.sony.com/CA/perl/swu-list.pl?mdl=VGNCR590CE
As you can see, there is no drop down menu anywhere to select which operating system I have.
And here:
http://esupport.sony.com/CA/perl/os7upgrade.pl?stage1=24&stage2=%20&stage3=VGN-CR590CE&month=&day=&year=&mdl=VGN-CR590C
it says that Windows 7 is not supported. (I have ran the Windows 7 Upgrade Advisor and my computer seemed to check out and pass all the system requirements.)
Can anyone help me out with finding where all necessary driver updates for my computer are, as many things I've noticed either don't function the same or at all as they used to when I had Vista?
Here's a list of all the problems that I've noticed so far.
- Scroll on touch pad didn't work (Resolved by downloading Synaptics drivers, although the official drivers would be nice.)
- Plugging into the headphone jack didn't do anything (Resolved by downloading Realtek drivers)
- Volume buttons change the volume in very tiny increments and doesn't show the levels on screen (Major issue for me.)
- Doesn't support Dual/Multi Monitors
- Doesn't recognize MIDI Controllers (Resolved. Not sure how.)
- Card reader doesn't work. (Another major problem.)
- Webcam doesn't work. (Built-in mic seems to work fine.)
- "AV Mode" button does nothing (I've never had a use for this button but before it would make the whole screen go black.)
- Function commands on keyboard don't work (ie. Fn + F5/F6 for brightness up/down)
I'm really worried that the drivers that would resolve these issues don't exist!
View 2 Replies
View Related
Mar 10, 2009
Is it a good idea to Install vista 64 bit motherboard drivers in windows seven?
I have asus p5w dh deluxe motherboard.
Windows Seven is running ok, but the harddisk score is a good deal less when compared to vista.
So, is this a good idea or better leave it alone at the moment?
View 6 Replies
View Related
Feb 12, 2009
I have Creative Webcam Vista, tired to install the Vista drivers they provided.
But it doesn't get installed.
please help me find the appropriate drivers.
View 4 Replies
View Related
Apr 16, 2011
is there a sound driver for hp special edition L2000 laptop which is compatible with windows 7?
View 2 Replies
View Related
Dec 17, 2012
Dell 280 drivers windows vista
View 1 Replies
View Related
Jan 16, 2013
So I got a pc for my mom and I would like to put windows 7 (64-Bit) on but there are only audio drivers for win7 but all the drivers are there for Vista (64-Bit). Should I be able to install the Vista drivers when I have win7 on?
View 2 Replies
View Related
