Using Vista 64-bit SB Drivers
Sep 22, 2009Is anyone using the ATi Vista 64-bit SouthBridge drivers in Windows 7 64-bit? If so, have you noticed any improvement/degradation?
View 2 RepliesIs anyone using the ATi Vista 64-bit SouthBridge drivers in Windows 7 64-bit? If so, have you noticed any improvement/degradation?
View 2 RepliesI've just updated my Acer Notebook to Windows 7. I've installed all the drivers that Acer supplies for Windows 7.
But what about the drivers that are not supplied? Should I install the ones that Acer supplies for Vista or stick with the 'pre-installed' drivers by Windows 7 ... Everything seems to work with the pre-installed ones.
And how do I check wether or not the Intel Turbo Memory is working correctly?
Can someone confirm whether i should use XP or vista drivers for my devices in Windows 7, i have used XP where i can so far and have had no problems?
View 6 Replies View RelatedIn general, can Vista drivers be used in Windows 7? I notice some of my equipment has drivers for Vista, but not W7. Is this because the manufacturer simply has not got around to producing W7 drivers?ermissions - Is there a way to take ownership of the entire hard drive? It seems like every time I turn around I have another folder that will not allow me to interact without changing the permissions.
View 1 Replies View RelatedI have a Setup CD for Vista, and if i put it to compatibility mode it installs all the drivers. But how can i know if the Drivers are working correctly?
And, my PC has low framerate in Flash Games ( When intense ), but that isn't normal is it? The flash player version is 10.
I currently have a HP Pavilion dv6799ep running Windows Vista Premium 32-bit, but I got a new license for Windows 7 Professional 64-bit and I would like to know if the Windows Vista 64-bit drivers will work on this version.
View 1 Replies View RelatedDo windows 7 support windows vista drivers? im asking this because i've got geforce fx 5200 and there is no windows 7 drivers for it. I found on google, that windows 7 supports vista's drivers fine.
View 2 Replies View RelatedI have a friend who has Asus with the following specs:
Proccessor: 2.0 GHz P7350
Ram: 3 gb
graphic card: nvidia 9300m gs
Can his vista drivers work on windows seven as well?
I use Windows 7 64-bit RC 7100.
I have got GF8600GT. Can I safely use Vista 64-bit nVidia drivers?
The reason I don't want nVidia drivers for Windows 7 is this:
How to REALLY set lower screen resolution?
I used to have Vista 32-bit on here and I recently upgraded to Windows 7 64-bit. The problem is that the Sony website doesn't release Windows 7 64-bit drivers for my model as it is only sold with Vista 32-bit.
http://esupport.sony.com/CA/perl/swu-list.pl?mdl=VGNCR590CE
As you can see, there is no drop down menu anywhere to select which operating system I have.
And here:
http://esupport.sony.com/CA/perl/os7upgrade.pl?stage1=24&stage2=%20&stage3=VGN-CR590CE&month=&day=&year=&mdl=VGN-CR590C
it says that Windows 7 is not supported. (I have ran the Windows 7 Upgrade Advisor and my computer seemed to check out and pass all the system requirements.)
Can anyone help me out with finding where all necessary driver updates for my computer are, as many things I've noticed either don't function the same or at all as they used to when I had Vista?
Here's a list of all the problems that I've noticed so far.
- Scroll on touch pad didn't work (Resolved by downloading Synaptics drivers, although the official drivers would be nice.)
- Plugging into the headphone jack didn't do anything (Resolved by downloading Realtek drivers)
- Volume buttons change the volume in very tiny increments and doesn't show the levels on screen (Major issue for me.)
- Doesn't support Dual/Multi Monitors
- Doesn't recognize MIDI Controllers (Resolved. Not sure how.)
- Card reader doesn't work. (Another major problem.)
- Webcam doesn't work. (Built-in mic seems to work fine.)
- "AV Mode" button does nothing (I've never had a use for this button but before it would make the whole screen go black.)
- Function commands on keyboard don't work (ie. Fn + F5/F6 for brightness up/down)
I'm really worried that the drivers that would resolve these issues don't exist!
Vista 32-bit Host connected direct to an HP printer - works fine. Win7 64-bit laptop connected direct to same HP printer - works fine. Win7 64-bit laptop printing via Vista 32-bit host - no go.
I've tried installing the 64-bit driver on the 32-bit Vista machine. I've also tried installing the 32-bit driver on the Win7 laptop. In both cases, Windows and the HP website give me the runaround and insure me that all necessary drivers will auto-install via Plug-n-Pray. But this is not the case. Unable to find driver downloads easily.
Is it a good idea to Install vista 64 bit motherboard drivers in windows seven?
I have asus p5w dh deluxe motherboard.
Windows Seven is running ok, but the harddisk score is a good deal less when compared to vista.
So, is this a good idea or better leave it alone at the moment?
I have Creative Webcam Vista, tired to install the Vista drivers they provided.
But it doesn't get installed.
please help me find the appropriate drivers.
is there a sound driver for hp special edition L2000 laptop which is compatible with windows 7?
View 2 Replies View RelatedDell 280 drivers windows vista
View 1 Replies View RelatedSo I got a pc for my mom and I would like to put windows 7 (64-Bit) on but there are only audio drivers for win7 but all the drivers are there for Vista (64-Bit). Should I be able to install the Vista drivers when I have win7 on?
View 2 Replies View RelatedI am currently experiencing slow performance on a Windows 7 RC 7100 laptop.
I have run RadarSync and all drivers are up to date, however when I check the device manager, the following have exclamation marks;
- Mass Storage Controller
- PCI Simple Communications Controller
- Unknown Device
I am considering installing the Manufacturers Drivers for VISTA via "Troubleshoot Compatibility" mode as opposed to the Windows Supplied drivers.
I have a lexmark x5470 and noticed they have only win vista drivers.What i want to know is if i can use the vista 64-bit drivers for my printer or if i must wait for win 7 specific drivers?Right now my lexmark x5470 is sitting useless until i know if the vista drivers for my printer will work or if i need to wait for win 7 drivers or get a new printer.I use win 7 home premium 64-bit.
View 2 Replies View RelatedI'm having this really weird problem.
I am currently running a GeForce 9500 GT on vista and have tried upgrading to Windows 7 release candidate 1 from Vista. The problem is, Windows 7 doesn't like the Nvidia drivers I have on my system. So I uninstalled them. Completely. Restarted. Tried the upgrade again, and boom! Still can't upgrade because Nvidia drivers / nview desktop manager (yes, that is what it says).
I have literally restarted my computer 20 times, uninstalling, reinstalling and whateverinstalling. I have no idea what to do in order to upgrade to windows 7. The drivers or my actual hardware is not letting me upgrade.
I have a brand new Toshiba laptop with Vista. It arrived just a few days before the Windows 7 release so I put the Toshiba aside and waited for the free Windows 7 upgrade disk, which just arrived.
Since I haven’t used the Toshiba yet, there’s no data or personal programs to protect. I don’t want to keep Vista, and of course I don’t want to keep all the bloatware. Currently, Vista is on the C disk; there is a recovery or backup partition (D); and E is free for data. The Toshiba did not come with a Vista restore disk so I will burn recovery disks with Vista before I install Windows 7.
Like everyone, I want a fresh, clean sparkling brand-new install of Windows 7. I can follow the tutorials to boot from the Windows 7 upgrade disk, go to advanced tools and re-format the partition with Vista (i.e. C) and then install Windows 7. I should have no problem with registration or activation since Windows 7 will see Vista before it’s deleted. I’m not 100% clear whether the recovery partition (D) will be maintained but it shouldn’t matter much because I’ve got recovery disks … right?
My two questions:
1) Do I need to worry about losing my drivers in this scenario? Should I be taking a copy of all drivers ahead of time, and if so, is there somewhere (on the Toshiba) I can easily find them all? Or will they all be on the recovery disks I burn, should I need them?
2) What about the one or two Toshiba-specific programs I might want to keep, like Config-free and facial recognition software? Are they gone with the clean install, or can I also get them off the recovery disks (or recovery partition, if it still exists post-clean install)?
Is there anything else I need to know before I get started?? I’d like to make this as painless as possible ..
I got a Asus P5Q-E Mobo, 8gb ram
Having Windows 7 7077 x64 installed for one week and before the upgrade nearly 2 months with build 7000.
I bought a new gpu, and replaces my old 8500GTS with a new 9800GT,
Problem is, Windows find the gpu, installs standard driver. all fine.
Second, Install new Win beta 7 Drivers (was trying new vista x64 drivers too), and i got black screen and lockup half time in install progress and when doing a hard restart right before Loginscreen also.
Restart, and windows is doing reset, and old drivers back.
Trying to install several times. no luck with any settings or admin settings to install, same problem, black restart black reset, black restart black reset, black restart black reset.... etc etc.
Putting back the old gpu, install same drivers, power of, putt new gpu in, and its getting black...
What is the problem? I cant find any info in systemlogg either, but the gpu works with standard drivers from windows
I hope i havent missed anything
Edit: My psu is Corsair 650w, i got 10 HDs, and it uses max 220-260w what i have tested, a bit more while playing (old gpu)
I will get a Vertex SSD this week, maybe the problems solves when installing a fresh Windows 7 on it? Otherwise i hope someone knows the issue.
Edit2:
Updated Bios on Mobo, Adaptec 2405 and Rocketraid 2320, Still same issue.
I have noticed that the HD led blinks all the time with that gpu, and its gets very hot...
I plugged out the power of my 2x5hds hotswapmodule, so only one hd was active and same error accured, The problems dissapears when i but pack the old gpu.
my web cam is no longer working after formatting my machine.
View 2 Replies View RelatedMy MSI motherboard (K9N6SGM-V) currently doesn't have drivers for Windows 7, can I use the Vista drivers? I am just a basic computer user, I don't need support for directx 11, nor do I needs support for new touch screen features.
View 5 Replies View RelatedI just purchased a new video card for my old Acer M3100 that I dual boot the original Vista and Windows 7 on. I bought a new Asus Nvidia GeForce GT 610 video card to play Skyrim. Windows 7 will install the drivers with absolutely no error messages but upon rebooting they won't load and I'm stuck with basic VGA. I booted out and back to Vista and loaded them and they installed fine as well and upon rebooting into Vista they actually load! My Windows 7 install is a recent clean install because I tried upgrading to Windows 8 and didn't do a clean install and it borked itself on all my legacy hardware. Does anyone know why a clean install won't load new video card drivers but my old Vista install loads them fine? (Yet another reason not to abandon the Vista Beast, Vista is the last OS that recognizes my (2) Rio Karma MP3 Players.)I downloaded the latest drivers for Windows 7 Pro 64Bit directly from Nvidias website and installed them and still get a "No GPU detected" message when trying to run the NVidia software that comes with the drivers.
NVidia Driver Version: 306.97
My system dual boots to either Windows 7 or Vista Ultimate, or, at least it is supposed to. Something happened and now the system just boots to Winodows 7 without giving me the choice to boot to either. When I use F6 I find that only Windows 7 is listed in the Operating Systems box.
View 1 Replies View RelatedNew laptop has Windows 7 Home Premium 64bit. I have two business programs that won't run on a 64bit system. Partitioned the hard drive to install Vista Home Premium 32bit to create a dual boot system solely to run these two programs.Can't get Vista to load. Followed tutorial meticulously. All goes fine until the "Vista will boot for the first time" step. After this first boot, the screen returns to the "completing installation" page. However, the process dies here and the progress bar across the bottom of the screen never moves, even after an hour. Reformatted the partition and started over with same results. Multiple attempts always die after the first boot.
View 9 Replies View RelatedI have two drives (C and D) with Vista on one and Win 7 on the other (not sure if they're actual drives or partitions of a single drive, how do I tell?). I am dual booting and never use Vista. Starting to need the disk space and want to delete Vista. Is this difficult in this scenario?
View 2 Replies View RelatedI had recently installed windows 7 on my laptop running windows vista. I did not remove the existing windows vista installation, and thus win 7 was installed in a dual boot combination. Now, i want to remove vista from my laptop and use windows 7 only.The problem is that during installation, win 7 was installed on logical drive and windows vista was on the primary drive. Thus, i cannot delete/format the windows vista partition. Also I cannot transfer the boot drive to the partition containing win 7 because the vista partition is the active one.
View 6 Replies View RelatedI have dualboot XP SP3 and Vista Ultimate on my system,,and now i want to install Windows 7 over the XP OS. I wish to keep Vista with Windows 7 without reinstalling Vista.
Can I just install Windows 7 over XP , or should i be careful for MBR,or boot....
I have a legitimate copy of Windows Vista with key codes etc and I have a legitimate upgrade disk for Windows 7. I had Windows 7 installed on a previous system build which had a HD crash and now I am starting again from scratch (wiyh backed up data).
Like a dolt, I installed Wondows 7 before I remembered it was an upgrade edition. I've looked all over the MS site and don't see a method I can use to Activate Windows 7 from this point. way to use my legitimate Windows disks and keys without having to wipe the drive, install Vista and then install Windows 7 yet again.
It's aggravating to have legitimate software and not be able to use it without needing to trick the system - surely there is a way to not have to start all over?
I have currently installed ONLY XP Pro. I used to have Vista Premium installed on a separate partition, But I uninstalled that. I purchased Windows 7 Upgrade disk.
Here's the question, Do I need to reinstall Vista to upgrade to 7 using the Vista key?