Replacing Vista - Drivers And System Programs
Dec 5, 2009
I have a brand new Toshiba laptop with Vista. It arrived just a few days before the Windows 7 release so I put the Toshiba aside and waited for the free Windows 7 upgrade disk, which just arrived.
Since I haven’t used the Toshiba yet, there’s no data or personal programs to protect. I don’t want to keep Vista, and of course I don’t want to keep all the bloatware. Currently, Vista is on the C disk; there is a recovery or backup partition (D); and E is free for data. The Toshiba did not come with a Vista restore disk so I will burn recovery disks with Vista before I install Windows 7.
Like everyone, I want a fresh, clean sparkling brand-new install of Windows 7. I can follow the tutorials to boot from the Windows 7 upgrade disk, go to advanced tools and re-format the partition with Vista (i.e. C) and then install Windows 7. I should have no problem with registration or activation since Windows 7 will see Vista before it’s deleted. I’m not 100% clear whether the recovery partition (D) will be maintained but it shouldn’t matter much because I’ve got recovery disks … right?
My two questions:
1) Do I need to worry about losing my drivers in this scenario? Should I be taking a copy of all drivers ahead of time, and if so, is there somewhere (on the Toshiba) I can easily find them all? Or will they all be on the recovery disks I burn, should I need them?
2) What about the one or two Toshiba-specific programs I might want to keep, like Config-free and facial recognition software? Are they gone with the clean install, or can I also get them off the recovery disks (or recovery partition, if it still exists post-clean install)?
Is there anything else I need to know before I get started?? I’d like to make this as painless as possible ..
View 9 Replies
ADVERTISEMENT
Feb 9, 2010
I want to put my old hard drive that has files and was used with windows vista and put it into a new windows 7 laptop. Is there any overlap or any config problems I can run into doing this? Or do I just put it in and the old files should work and all i have to do is update some drivers from vista to 7?
View 2 Replies
View Related
May 18, 2012
Having issues with RAID0 array being detected by Windows7 Ultimate x64 as SCSI. Apparently these drivers are the 'default' drivers that install when the RAID array is initialized. There is no option at this point to install other drivers instead.Using DeviceManager, there is an option to 'update drivers', and regardless of the method chosen, even selecting the file for a previously-downloaded set of drivers, Windows7 always comes back with a message of "Windows has determined that the best drivers for your system are already installed". Considering that SCSI drivers are the OLDEST ones out there, and actual SCSI devices are becoming rarer and rarer, how is it that these drivers cannot be replaced with more current and more applicable drivers?
View 5 Replies
View Related
Dec 24, 2009
I upgraded my dell studio 1535 from Vista 64 bit to 7 professional 64-bit and now have problems with the keyboard (It's usually recognized, but keystrokes are often not recorded. Sometimes it doesn't work at all). USB devices work fine. I have my Vista OS under c:Windows.old so I would like to replace the 7 keyboard drivers (i8042prt.sys and kbdclass.sys) with the Vista drivers of the same names that are in c:window.oldwindowssystem32drivers Will this cause any problems? If not, how would I go about doing this?
View 1 Replies
View Related
Aug 15, 2012
My system dual boots to either Windows 7 or Vista Ultimate, or, at least it is supposed to. Something happened and now the system just boots to Winodows 7 without giving me the choice to boot to either. When I use F6 I find that only Windows 7 is listed in the Operating Systems box.
View 1 Replies
View Related
Apr 30, 2012
I have a WIN -7 system with 1 trig SADA hard drive. I also have a Vista system with a 750mb hard drive from my old computer.Can I install the Vista hard drive into the Win-7 system and boot from either system?
View 1 Replies
View Related
Jan 10, 2009
But I installed Windows 7 64 with the dual boot option, and have Vista 32 as my regular OS. Is there any way to transfer the programs from the Vista partition over to the Win 7 partition without re-installing each and every program?
On a related note - is there a way to transfer my old desktop from Vista over to Win 7 just the way it is?
View 2 Replies
View Related
May 7, 2009
Can I run programs from my Vista partition and access files, etc from it while on Windows 7? I just installed it on a 150gb partition and I really don't want to reinstall everything, transfer over data, etc, etc. Will this work or no?
View 3 Replies
View Related
Jul 27, 2009
Okay so I set up a new partition on my hard drive to boot Windows 7 from, so that I could have both Vista and Windows 7 on my laptop. However, is there a way that Windows 7 can use all of the programs and files I already have in my Vista partition? I can manually go over and start them, but they aren't on my "Programs" list in Windows 7 or the start menu or anything.
is there any way to automatically integrate all my files/programs with both my operating systems? I don't think I should have to download two instances of google chrome or firefox. you know? Any insight would be appreciated. I am new to dual booting. This is is the first OS i have ever installed myself.
View 3 Replies
View Related
Jan 29, 2011
I have a new desktop with Windows 7 Home Premium. My old desktop is a Vista Home premium and both systems are 64 bit. I bought a program called Laplink PC mover and I want to move all my programs and files from the Vista system to the Win 7 system. Can I do this?
View 5 Replies
View Related
Jun 13, 2012
I am about to install Windows 7 64 bit on a new-build PC, so it will be a new install and on a new formatted hard drive. I have three other hard drives on which all the program and other files were created under Vista 32 bit. I know I can transfer the files which are installed on my Vista boot hard drive using Windows Easy Transfer, but when I am running Windows 7 will it recognise all the programs and files on the existing drives if I just leave them there?
View 1 Replies
View Related
Aug 26, 2009
recently went from the pre installed vista on my HP dv6920ea laptop to 7enterprise.
When i put in a cd or usb key there is no autorun box that appears now.
Also ive lost the pre installed cd / dvd burning / copying program. Where might i find that again?
View 4 Replies
View Related
Nov 18, 2009
I just upgraded a 32 bit windows vista Sony Vaio to 64 bit windows 7, but all the shortcuts and original programs (accessories, dvd writers, etc.) installed by Sony are gone. Would like to know how to get these programs back. I had try to use the disc that came with the computer but it actually wipe out windows 7 and reinstall windows vista back onto the computer.
View 4 Replies
View Related
Jul 26, 2011
I have a vista PC at the moment but my system is lacking for some of the games I play so I am thinking about getting a new system. I have loads of mods and files on my HDD I have spent days putting together very specifically and I don't want to have to start again.
If I get a windows 7 based PC and add my old 500gb drive as a second drive will it read it fine and everything will be as it was or will the fact that it is vista mean it is incompatible and have to be reformatted? how operating systems work.
View 1 Replies
View Related
May 24, 2009
Can someone please help me or point me to a guide on how to enable/share a printer between a Windows 7 RC and a vista system?
I have a HP printer connected to my Windows 7 RC x64 system and it prints from my computer just fine. I pulled up the settings and told it I wanted to share the printer as "Win7HP" to make the name easy. Anyway when I went down to my roomates computer I didn't see the printer and if I try to click my computer name under his network window I get a pop up asking for a user name and a PW. What am I doing wrong? I would hate to have to install another partition of Vista x64 just so he can print using my printer.
When we had things set up before he never had to "log in" from his computer to access my printer.
View 3 Replies
View Related
May 19, 2011
Dell XPS 435T/9000 with intel i7-920 and 6gb memory. Computer is crashing and Dell says it's a software problem, not hardware. Windows 7 was installed as a free upgrade over Vista.What do I have to do to perform a fresh install? All my critical data is backed up.
View 2 Replies
View Related
Jul 6, 2009
I am dual booting Vista and Windows7 RC 7100. They are both on the same Hard Drive on different partitions. I have made the decision to stick with the new OS (Windows7) and give Vista the boot. So I want to get rid of the extra partition and revert to a single OS (Windows7).
I don't want to reformat the whole hard drive and completely re-install the windows7 operating system. I want to remove Vista from the dual boot menu and keep windows7. Then I want to format the Vista Partition. How can I do this and keep my present installation of Windows7 without having to reinstall Windows7?
View 6 Replies
View Related
Aug 13, 2009
I have 2 hard drives, the first has Win 7 RC1 and the second has XP and Vista in their own partitions. The Win 7 boot loader gives me the choice of Windows 7, Vista and XP when I boot up. The question is: If I install Ubuntu onto the second HD in a currently unoccupied partion, will GRUB (which is sure to take over the booting process, from past experience) still leave me with the 3 choices I have now (assuming I do not select the Ubuntu prompt). I wwould hate to lose the ability to get into the 3 Win systems !
View 8 Replies
View Related
Jan 6, 2012
my laptop didnt work, when i open it it say missing operating system. what can i do?
View 2 Replies
View Related
Jan 22, 2012
I had windows vista 32 bit earlier. Then I got windows 7 professional upgrade in trial period. I didn't notice how it happened. Of course it must be my mistake. Now when i boot from windows 7 it shows 64 bit and in vista it shows 32 bit. The system asks before booting which one to choose. It's today only that I have installed but I am not facing any problem as such except that i need a product key within 30 days. Should i leave as it is or uninstall vista somehow. Would i be able to reboot my system using the 32 bit vista CD?
View 1 Replies
View Related
Oct 31, 2009
I've just updated my Acer Notebook to Windows 7. I've installed all the drivers that Acer supplies for Windows 7.
But what about the drivers that are not supplied? Should I install the ones that Acer supplies for Vista or stick with the 'pre-installed' drivers by Windows 7 ... Everything seems to work with the pre-installed ones.
And how do I check wether or not the Intel Turbo Memory is working correctly?
View 2 Replies
View Related
May 29, 2012
I have a system image created in Vista with external, internal hard drive is done. i replaced internal and installed windows 7. Can i use any of the information from this system image backup? Is there anyway to read the drive and pick out some of the important files? i don't need the whole system restore but would like as much of the old info as possible.
View 1 Replies
View Related
Oct 12, 2010
eway with Windows Vista x64 and want to upgrade to Windows 7. I've been trying to figure out how to do it by following along to another thread in here but as BarefootKid mentioned, it is probably best that I start my own threadAfter I install Windows 7 and it completes and reboots it takes me to system recovery but it is the system recovery for Windows vista. I've been trying different things like formatting the partition right before the install and making the partition that Windows 7 is going to go on "active" in the .cmd prompt. I keep going in circlesinstalling Windows 7, getting system recovery and eventually choosing to reformat from Gateway's manufacturer settings...although once I do this I can't actually get back into Windows Vista as that now seems to be messed up. (I don't have the original Vista installation cd). Then I try rebooting and installing from the Windows 7 cd again to try more techniques to get it to work...I'm at the point of possibly deleting the recovery partition because the Vista remnants seem to be on this partition and taking over once I install Windows 7.
View 7 Replies
View Related
Dec 20, 2012
(TravelMate 5620) running Vista I installed Microsoft Office 2007 and Outlook worked the first time, but after opening it a second time it gave me an error message, saying that "This application has failed to start because MSVCR80.dll was not found. url...
View 2 Replies
View Related
Jan 10, 2013
What is the advantage of using windows 7 if compared to window xp?
View 1 Replies
View Related
Jan 18, 2009
Can someone confirm whether i should use XP or vista drivers for my devices in Windows 7, i have used XP where i can so far and have had no problems?
View 6 Replies
View Related
Sep 22, 2009
Is anyone using the ATi Vista 64-bit SouthBridge drivers in Windows 7 64-bit? If so, have you noticed any improvement/degradation?
View 2 Replies
View Related
Sep 25, 2012
Compaq Presario SR5010NX
Celeron D processor 360
Vista Home Basic
512 MB RAM
120 GB HDD
Intel graphics media accelerator
DVD/CD w/Lightscribe
This system is so sluggish it either has multiple infections or is just overloaded given its puny 512 MB of RAM, so I can't really use the system specs utility at the moment.Since I'm working on a similar clean install for an ACER notebook which is Win7HP 32-bit, what are the chances that the .iso file I'm burning to DVD can also be used for this much older technology. I have no problem upgrading the RAM to its max, unless it's already at its max?
View 9 Replies
View Related
Dec 28, 2012
I updated my satelite a105-s2236 from vista to windows 7 and when i tried to play games it said i need to update video card driver for faster performance.How do i update driver?
View 2 Replies
View Related
Jul 28, 2011
In general, can Vista drivers be used in Windows 7? I notice some of my equipment has drivers for Vista, but not W7. Is this because the manufacturer simply has not got around to producing W7 drivers?ermissions - Is there a way to take ownership of the entire hard drive? It seems like every time I turn around I have another folder that will not allow me to interact without changing the permissions.
View 1 Replies
View Related
Jul 8, 2009
I have a Setup CD for Vista, and if i put it to compatibility mode it installs all the drivers. But how can i know if the Drivers are working correctly?
And, my PC has low framerate in Flash Games ( When intense ), but that isn't normal is it? The flash player version is 10.
View 5 Replies
View Related
