recently went from the pre installed vista on my HP dv6920ea laptop to 7enterprise.
When i put in a cd or usb key there is no autorun box that appears now.
Also ive lost the pre installed cd / dvd burning / copying program. Where might i find that again?
I just upgraded a 32 bit windows vista Sony Vaio to 64 bit windows 7, but all the shortcuts and original programs (accessories, dvd writers, etc.) installed by Sony are gone. Would like to know how to get these programs back. I had try to use the disc that came with the computer but it actually wipe out windows 7 and reinstall windows vista back onto the computer.
View 4 Replies View RelatedI usually dont beg, however, I have lost all keyboard and mouse funcitons in my computer and this happened directly after I installed my new Keyboard by Kensington PilotBoard. I have other 2.4Ghz wireless by Logitech as well as ps/2 and usb wired keyboards and mice by microsoft and logitech. It all was ok, the kensington mouse was not smooth so getting the buttons or whatever was recommended and went to the website for the 'most up to data' software. that was the end. after a reboot i have been lost. The computer boots up and actually functions in its serverlike capacity with its internet cable and for the center of the little home network. i just can not make the cursor arrow move. no keyboard input, I tried safe mode, nothing. I tried Safe Mode with Command Prompt, cant write a command even if i knew what to put in there. NO Safe Mode operation of usb, wired mouse or keyboard. I went to cmos and made all changes to basics , no good. but the only time the keyboard will work is directly in the bios . But not any Bios change I made had any impact on the lost functions.Since I built it myself, I have a back up or restore disc but can not access that. i can not roll anything back , cant get to device manager. or at least I havent been able to make it do anything but a boot. i do the reset to give me the options of another start in safe mode but it still has no key or mouse functions .
View 5 Replies View RelatedLast night I was using my samsung series 7 laptop but it was freezing up frequently so I after reading around some forums I decided I needed to format my HHD to solve my problems.After using the cd "system recovery media" I turned on my laptop to find only the trash bin in the desktop. I cant connect to wireless internet and I cant configure cable internet altough the icon still appears. Also my usb drives dont work either.
View 2 Replies View RelatedIs it possible to upgrade my 32 bit Win vista to 64 bit Win 7 without re-formatting?
View 5 Replies View RelatedI have three machines in my house running Seven. However I will focus on two.
1.) MSI Mobo, AMD 4200+, 2GB RAM, etc. (Look in my stats for the desktop)
2.) HP 6735s, AMD Turion X2, 2.5GB RAM, 256MB Dedicated Radeon HD 3200.
The MSI ran Windows Vista Ultimate 32 bit. I had everything I wanted on there so I didn't want to do a clean install. Once the Seven upgrade finished, it was fantastic. The only program that I already had that didn't work was Daemon Tools. However AIM still worked, and you can't install AIM from Windows Seven.
Now on my laptop, it came with Vista, but I wanted Seven. So I did a clean install, because I didn't want all that HP garbage that comes with them. Now I have an issue with sleep. When my PC goes to sleep, and I wake it back up, it runs ok, but then when I go through certain tasks it hangs.
Sometimes if I awake it with my wireless off, it won't come back on, it won't recognize plugged in add ons, and when I go file searching it hangs, like if indexing is messed up. I am considering, rolling back, getting Vista all the way to SP1, downloading AIM, and whatever else I need, and just upgrading it like I did my PC.
Also, the third PC which is a Dell does not perform as well as it should, but does fine in Vista.
I am not a Windows expert, but from deduction, I can conclude that Windows Seven stability is greatly enhanced when it is upgraded from Windows Vista.
I've installed the Windows 7 upgrade from Vista onto my C drive - I was careful about making sure I didn't do a custom installation because I wanted to keep my files and programs. After the installation - my programs are still installed, the file folders are still there, but the folders on my D drive are empty. My music, photo, video, and document libraries are completely emptyOther threads have said to look in the Windows.old folder but there is no Windows.old folder on my computer. I had a few folders with documents on the desktop that are intact - so why would it delete some files but not others?
View 9 Replies View RelatedGoing through an upgrade to Windows 7 (Ultimate x64 from Vista Home Premium x64) and saved the media center setup for last before I move my files back to the original locations. However, I am having problems with the TV setup. I have made no hardware changed during the upgrade and have been using the Hauppague 2250 WIN TV HVR-2250. I reinstalled the WMC specific drivers for Widows 7 and went through the process, and to summarize, no go. Setup manually and went to a channel to check this and got the message "Files needed to display video are not installed or are not working correctly. Restart Windows Media Center or restart computer." I am just connecting the OTA antenna and pulling the local digital signals (no cable) so it is just limited to that signal. Here is where I think the problem may have originated.During the setup, I relocated all default user profile directories to another partition (away from the standard system drive) through the registry. I am assuming that doing this, I moved the file location where the source file is directed to this partition and WMC is still looking in the "default" location for the video source so I will need to edit the registry to change the default location to the new user profile location.
How I drew this conclusion:I went ahead and installed WinTV v.7 because i wanted to record some old VCR footage through the s-video connection. Was having similar problems where the program was reverting to the default location (the "C" drive), and it was not picking up the TV signal. I changed the default location (to locate the "buffer" and "data" file in the program to the new user location and that straightened everything out for that program. So the assumption is that WMC is experiencing the same problem and i need to modify the default location in the registry to redirect WMC.
1. Are there multiple registry edits that need modified or is there a single location where these edits need to take place.
2. Since you do not have an option to edit directly in WMC, if I make these changes in the registry, reboot & restart the WMC setup process, will the setup process automatically revert to the original ("C" drive) location or will these changes hold through the setup process and I can go through the automatic setup process without problems. (Or do i have to go with the manual process).
The windows 7 Home premium 64-bit currently installed is upgraded from vista. The upgrade key and disk are available as well as in the HD. The current goal is to upgrade from an Q8300 to a i5-2500K, with the appropriate mobo (asus P8P67 M-Pro) and ram (8gb ddr3 g.skill 1333), what are the necessary steps/advice when doing so w/o purchasing a new OS?
View 2 Replies View RelatedMy brother has a desktop that will barely even turn on because of a virus. Could you upgrade it to Windows 7 and if you could what would happen? I didn't know whether to put this in the Vista forum or the Windows 7 forum...
View 10 Replies View RelatedSo I bought the windows upgrade CDs to upgrade my vista PC's to 7. (Big mistake) Wiped out the HD and did the entire install. But every time I open up a video on my WMP it starts to play then stops. The PC then opens up a SV Host program that uses up 80% of the processor. So I have no video playing and my PC won't hardly work at all till I cntrl alt del and close the SV host.
What can I do to make this OS work correctly? The PC is an HP m9500z.
I have recently upgraded my win vista 32 bit to windows 7 32 bit home premium. If my comp crashes do i need a vista bootable cd or can i repair it from windows 7 cd which i purchased
View 1 Replies View RelatedSomehow I have lost the Run command in Vista, is there a way to get it back?
View 2 Replies View RelatedVista created a subdirectory named Buford, and stored data from certain programs (e.g., Garmin MapSource waypoints/track files) in that sub directory. I cannot find this subdirectory in W7.
View 9 Replies View RelatedI upgraded from Vista to Windows 7 with no problem. A pop up did mention that I would not be able to use windows mail but did advise my setting and files would still be able to be used. I now have Outlook running but can find no way forward to find all my previous emails.
Question.
Where are my files?
I purchased an HP laptop running Vista just when Windows 7 was coming out. It included a coupon to upgrade to Windows 7. I ordered the upgrade disks.I finally ran the upgrade to Windows 7 including performing the suggested backup of all my files on a separate hard drive. The instructions indicated that I would be saving my email and contacts that was a part of Windows Mail. Now that I am running Win 7, I don't have access to Windows Mail and I don't know where my email files might reside.What can I do now to gain access to my old emails and contracts?
View 2 Replies View RelatedI just installed windows 7 ultimate on my pc.
i already had xp32 and vista 64 business on a dual boot on the same HDD before installing windows 7.
during windows 7 install, I selected the xp32 partition, formatted it and installed windows 7 over the top as I no longer wanted xp32.
When the windows 7 install was complete I expected to see a dual boot screen with
option 1. windows 7
and option 2. vista64
unfortunatelty i have no dual boot options, the pc now just goes straight into windows 7. It doesnt sem to know that vista is there.
i would appreciate assistance in getting a dual boot set up with vista64 and windows 7
I did set up a connection between my Win 7 x64 laptop & vista x64 desktop where I could access my desktop files from the laptop but no access to laptop from the desktop & I was ok with that. Suddenly a few days back, I lost the connection from the laptop & I don't have any clue to that. I've changed the network types between home & public but it didn't work. What should I do to restore the connection.
View 1 Replies View RelatedI have lost all my list in the all programs in the start button and wated to know if you have found or know of a better way to solve this issue other than a repair install.
View 6 Replies View RelatedI did an update and got a BSOD. Message said "Check disc"' After completion, all my programs and settings are lost. I have done Acronis backups, but they are gone. I tried to do a restore, but only date it gives is today's. Can I use the Windows 7 disc to do a repair or will I have to do a complete re-install? Also, after screen came back, I kept getting a "Windows Validation Failed" even though I clicked Validate online and it said "Validation complete".
View 14 Replies View RelatedI have win 7 home basic in one of my laptop. I wanted to know if all my personal files and programs like ms office will go if I upgrade to win 7 ultimate. I have ultimate's cd with me. I just wanted to know if I will lose all my programs if I upgrade from home basic to ultimate.
View 4 Replies View RelatedBut I installed Windows 7 64 with the dual boot option, and have Vista 32 as my regular OS. Is there any way to transfer the programs from the Vista partition over to the Win 7 partition without re-installing each and every program?
On a related note - is there a way to transfer my old desktop from Vista over to Win 7 just the way it is?
Can I run programs from my Vista partition and access files, etc from it while on Windows 7? I just installed it on a 150gb partition and I really don't want to reinstall everything, transfer over data, etc, etc. Will this work or no?
View 3 Replies View RelatedOkay so I set up a new partition on my hard drive to boot Windows 7 from, so that I could have both Vista and Windows 7 on my laptop. However, is there a way that Windows 7 can use all of the programs and files I already have in my Vista partition? I can manually go over and start them, but they aren't on my "Programs" list in Windows 7 or the start menu or anything.
is there any way to automatically integrate all my files/programs with both my operating systems? I don't think I should have to download two instances of google chrome or firefox. you know? Any insight would be appreciated. I am new to dual booting. This is is the first OS i have ever installed myself.
I have a new desktop with Windows 7 Home Premium. My old desktop is a Vista Home premium and both systems are 64 bit. I bought a program called Laplink PC mover and I want to move all my programs and files from the Vista system to the Win 7 system. Can I do this?
View 5 Replies View RelatedI am about to install Windows 7 64 bit on a new-build PC, so it will be a new install and on a new formatted hard drive. I have three other hard drives on which all the program and other files were created under Vista 32 bit. I know I can transfer the files which are installed on my Vista boot hard drive using Windows Easy Transfer, but when I am running Windows 7 will it recognise all the programs and files on the existing drives if I just leave them there?
View 1 Replies View RelatedI have a brand new Toshiba laptop with Vista. It arrived just a few days before the Windows 7 release so I put the Toshiba aside and waited for the free Windows 7 upgrade disk, which just arrived.
Since I haven’t used the Toshiba yet, there’s no data or personal programs to protect. I don’t want to keep Vista, and of course I don’t want to keep all the bloatware. Currently, Vista is on the C disk; there is a recovery or backup partition (D); and E is free for data. The Toshiba did not come with a Vista restore disk so I will burn recovery disks with Vista before I install Windows 7.
Like everyone, I want a fresh, clean sparkling brand-new install of Windows 7. I can follow the tutorials to boot from the Windows 7 upgrade disk, go to advanced tools and re-format the partition with Vista (i.e. C) and then install Windows 7. I should have no problem with registration or activation since Windows 7 will see Vista before it’s deleted. I’m not 100% clear whether the recovery partition (D) will be maintained but it shouldn’t matter much because I’ve got recovery disks … right?
My two questions:
1) Do I need to worry about losing my drivers in this scenario? Should I be taking a copy of all drivers ahead of time, and if so, is there somewhere (on the Toshiba) I can easily find them all? Or will they all be on the recovery disks I burn, should I need them?
2) What about the one or two Toshiba-specific programs I might want to keep, like Config-free and facial recognition software? Are they gone with the clean install, or can I also get them off the recovery disks (or recovery partition, if it still exists post-clean install)?
Is there anything else I need to know before I get started?? I’d like to make this as painless as possible ..
So what i want to do is change my key functions on my keyboard (example: rather than ctrl-c i want to use command-c "aka windows-c")but i don't want to change the command key to be ctrl but make it so windows recognizes it as copy when i push command-c also want to change other stuff like ctrl-alt-del and paste and closing windows
the reason i don't want to change command to ctrl is if im in an application that i need to control i want to be able to hit the actual ctrl key.
i basically want to make my windows feel a little more like macintosh not in the way of looks but function of keys. hope it makes sense and hope someone knows how to do it.
please does any one know how to add spell check function to right click. When filling out online job application for example on XP I had spell check option on right click but do not on windows 7.
View 3 Replies View RelatedHaving problems with the Sleep, Restart, and Shut Down functions after struggling trying to get a defective external disk drive enclosure to work.When I use any of the above functions the computer shuts down. I cannot wake by moving or left clicking the mouse as before. The computer shuts down and will not come on with the front panel power button. Ditto for Restart. I have to pull the power cord for about a minute before reconnecting. Then I press the power button and the computer commences to boot and windows initializes very slowlyI restored the computer to an earlier time before using the defective external drive enclosure, but I still have the same powerup/boot symptoms. stonooka has chosen the best answer to his/her question.Click here to view the answer that was selected.
View 4 Replies View RelatedFor some several months now I have been happily using the "Pin to Explorer" function as a means of quickly accessing several folders, last night Windows installed a critical update of some sort and on rebooting this morning, right clicking the explorer folder on the task bar showed all my pinned folders gone, I dragged a folder to the task bar and got the "Pin to Windows Explorer" option which I selected, but to no avail, nothing is pinned any longer. I do have "store recently opened programs" checked as well as the second option "store and display recently opened... etc"this seems not to have any effect.I tried a system restore prior to the update, no change.how to restore this function?
View 2 Replies View Related