I have installed the 32 bit driver for my Minolta 1300W. I can print happily in XP mode but I don't seem to be able to be able to use the printer in the Windows 7 host (64 bit Pro). Should I be able to see it as a printer if I attempt to print a document in Office? Launching the application doesn't help.
View 2 Replies
I've taken on a migration project for an SMB. They have an ancient application that they use and cannot find a replacement for.
The problem is that the application writes to the root of C: when creating mail merge documents, while this wasn't an issue on XP with the correct permissions its a problem with 7 due to UAC not letting standard users write to that location.
The software vendors have come back with the standard answer "turn UAC off" ... nope .. not prepared to do that.
I've managed to get a copy of the application so I could do some experimenting with Virtual XP mode. While this allows the application to run and create the mail merges correctly it seems to require the creation and setup of a VM every time a new users logs on.
Is there anyway to share a single VM between multiple users or could it be done by assigning published applications to all users on the host?
I'm running windows 7 ultimate and i haven't run XP mode in a while so i'm not sure if it was an update or what that caused this. but the crashes that i'm referencing happened on 4/27/2012
View 7 Replies View RelatedThis might be a silly question, but I'm having a terrible time trying to access files on the host machine (Windows 7) through the command prompt within the Virtual Machine (XP). I can see the drives in Explorer (e.g. C on VAULT_CORE_I&) and I see sclientc in the prompt, but I have no idea how to access the drive from the prompt.
I'm trying to help out a colleague who runs an old FORTRAN compiler and does alot of his engineering calcs with it, and would not work in Windows 7 (but it is working in XP Mode). However, I'd like to keep the files on his Windows 7 machine and not contain them inside the virtual machine.
the computer I am concerned with is running Windows 7 with IE8, Microsoft Security Essentials and Malwarebytes Anti-Malware. I am currently in Safe Mode with Networking without issue.The owner of the computer says that something happened earlier today while he was online that sounds like some false antivirus popup, but he's unsure. Here are the symptoms in normal mode. Every application, from moving through them to opening and closing them, runs exceptionally slow - one to three minutes to open, at least a minute to open internet pages. I noticed that, when in IE, as the pages are loading the IE page disappears and reappears. I am not very familiar with Windows 7 so I don't know if it is related. The computer seems to be getting slower as the day goes on. CPU usage is very high.So far, I have disabled many startup items that were unnecessary. I ran CCleaner and cleaned up. MBAM was run in both normal and safe mode, full scans, and found nothing. This is also posted in Viruses and Malware, but I'm unsure where it should live.
View 2 Replies View Relatedwindow 7 working on safe mode and unable to choose the another restoration point and it is not loading in normal mode -after installed third party software worked on that for few hours, then after switched off and later it switched on then after this problem started, automatic repair done, nothing is notified
View 1 Replies View RelatedI am using acer laptop,intel Pentium processor,windows7 professional os,my problem is windows is not starting normally and is running safe-mode.when entering normal mode it is displaying "welcome" after entering password "Please wait",it takes a long time to starting window and i'm waiting more than 24 hours but its not starting window normally...but it starting safe mode.
View 1 Replies View RelatedI'm using Win 7 Pro logon as user with administrative credential. I need to do printing in DOS mode. The Case is : I type Net Use LPT1: \printserverp1 in DOS mode, it displays the command completed successfuly. The connection was made when I look at it again by using net use. But when I send a command 'dir/w > lpt1 ' in dos mode, it shows access is denied. It doesn't allow me to send a print job
View 2 Replies View RelatedI've been trying to print from the Windows 7 XP Mode, with no success. How do I set up the Win7 XP Mode so I can print from it. I have a Laserjet 1320 printer. It prints fine from Windows 7.
View 12 Replies View RelatedWindows 7 x64 does not boot into Safe Mode or Safe Mode with command prompt. Normal mode boots perfectly. Are there any suggestions on how to resolve this? I've tried startup repair and attempted fix boot, etc. No affect. The unit is free of infection. I also tried using SFC, but it said everything was fine.
View 6 Replies View Relatedwindows xp mode not working properly. When reinstalling it says "windows xp mode already installed". I cant install the virtual pc associated with XP Mode.
View 1 Replies View RelatedI have a Laptop HP pavilion Dv4 my graphics card is AMD M880G with ATI Mobility Radeon HD 4200, my processor is AMD Turion(tm) II dual core mobile M500. The thing is i was playing Tropico 4 and i paused it then it began to mix pixels i couldn't see nothing, then i restarted and this is what happens:I cant see nothing, all is mixed up. on safe mode runs well.I played driver san francisco, fallout new vegas before and any of this happened.
View 44 Replies View Relatedi bought my hp pavilion dv6 laptop in 2010 and the warranty went out on 2011, i turn on my laptop and i only get the quick web. Every time i try to start window it tells me it cant. i can not even get on safe mode. it asks me to repair my computer but every time i click on that i get a blank blue screen (baby blue color). i have tried to go on safe mode it wont let me, i tried to go on safe mode command prompt and it still wont let me,
View 4 Replies View RelatedI am not able to download xp mode in windows 7 professional. Every time I go and click the "Download XP Mode" button it comes up with this "Windows Validation Required" screen. So I download this windowsactivationupdate.exe and then run and install it. However, once I go and click the xp mode button it asks me to install it again even though I just did. I don't know why this message is coming up in the first place because I have activated my copy of windows and didn't do anything illegal to get this copy of windows. The only thing that I can think that could cause a problem is that I used to have this copy installed on my desktop before I switched my desktop to enterprise so I could use professional on this.
View 9 Replies View RelatedI have win7 on C drive and WinXPsp3 on D drive. Drives are separate. You can see full specs below.
I boot into XP on D fine. I can also boot into Win7 on C fine, but here is the catch. The computer wants to go into a chkdsk if I boot into win7. If I let the computer do this it goes through a very long process and when it comes out of that process it reboots and goes through its normal procedure.
But then when it gets to the very last step, the step where it shows the wallpaper, icons and taskbar, all I get is blank screen.
If I boot into safe mode I can see everything. If I boot into safemode with networking I can see everything. As a matter of fact that is how I am typing this message now.
What do I need to do to get my computer to boot correctly?
Here are my specs:
Desktop:
Drive C: W7 Home Premium 80GB NTFS (IDE)
Drive D: WinXP Pro sp2 80GB NTFS (IDE)
[Code].....
When I turn it on, it loads the compaq screen, then says "windows is loading files". It then attempts to take me to the startup repair screen, but cannot load the startup repair options and just stays at a blue screen (NOT the blue screen of death).
I am unable to start the computer in safe mode as it gets to the same screen and does the same thing.
I have accessed the boot options screen and loaded windows from the disk in an attempt the repair it that way but I can not restore the computer from an earlier point in time and startup repair does nothing but search for problems for hours with no progress.
Im running windows 7 home edition 32bit The computer is a compaq presario CQ42
My entire organization in currently running XP, however we are thinking about going to Windows 7 if i can get this to work.We are using Siebel 7 Production in order to manage our customers, and this only runs in IE6. This is fine since we are still using XP and actually this is the reason we are using XP.I have setup a test computer with Windows 7 and XP mode and have published the link for Siebel to Windows 7 so I can just launch it from the desktop. Great!!! The issue that i am having is that we are in the middle of developing a replacement for Siebel, and this requires us to move our data to Sharepoint 2010. Within Siebel we have always used a link that opens a webpage to customer purchase history that is hosted in Sharepoint. With moving to Sharepoint 2010 IE6 is no longer supported, we will need IE7 or above.y question is, when i click on that link located within the Siebel IE6 window, how can i get it to launch in the brower in windows 7, and not in IE6 XP mode? Is there a way we can change the link to force it to open in the actual windows 7 browser?
View 1 Replies View RelatedI have a Dell inspiron 4010 laptop with Windows 7. I am unable to log on. The safe mode options screen keeps looping, and i am unable to boot. none of the safe mode options work, though the screen shows the loading windows files before restarting the safe mode options screen again. when i press f8 to get the advanced boot options, the system repair option is no longer there (it was there yesterday, but the system restore or system repairs didn't work), nor do any of the advanced boot options work.when i choose to disable automatic restart on system failure it appears that windows is startingbut then goes to a blue screen that says STOP: C0000135 The program can't start because %hs is missing.I believe this is happening as a result of an automatic Windows update.
View 14 Replies View RelatedI am trying to figure out if its possible to print from applications instaled in Win 7 Using an XP compatible pdf printer software (Print2Pdf) installed in XP mode. The problemis because its installed on the XP virtual machine the printer does not appear in the Win 7 printers list. I do not wish to install the programmes I wish to print from in XP mode as well just to use this pdf printer.
View 9 Replies View Relatedmy computer, a Lenovo Idea pad P580 running on Windows 7, is 5 weeks old and yesterday I was using Microsoft Word to edit a document and Word suddenly crashed. So I closed it, but then the cursor started spinning and I could not access anything on my computer so I rebooted and it started up but then just trying to open Microsoft Word caused the cursor to keep spinning again and I could not access anything. So I again rebooted and this time it was spinning from the beginning. So I again rebooted and turned it on in safe mode and everything was fine. Then turned it off and left it off overnight. In the morning I tried to boot in normal mode and it did boot but it was again spinning and I could not access anything. So I again rebooted in safe mode and I can use my computer fine.And also, this is unrelated, but I was wondering if anyone could tell me what I need to do to make the scroll bar stop moving on its own? Every time I scroll down a page it seems to lock the scroll bar and so when I move the cursor away from the scroll bar, the scroll bar still moves and I cannot click any links or anything on that webpage.
View 6 Replies View Relatedi recently ran into a problem with starting up my computer. I have the blue screen of death. I've tried safe mode. It won't work. I would click safe mode it would load and then go back to the blue screen. I have a lenovo laptop and I'm not trying to pay 150-200 for it!
View 3 Replies View RelatedWin7 pro, sp1.Dell i620 Unable to install XP mode. Process goes 98% completion, stops, removes all changes, returns to normal.Tried new hdd with same image. Did not work. Tried new hdd with only win7 loaded.
View 14 Replies View RelatedI have an old printer (Brother 1430) attached to my new PC running windows 7 via the LPT1 port. It works well in Windows 7 but I am unable to print from XP mode.
I have installed the drivers into XP mode and it seems to be recognised by XP but no luck with printing. Have tried a USB connector but again no success.
My printer is attached via USB. I can get my printer installed in both Windows 7 and XP mode. In XP mode it shows as shared in USB devices. However, it is online in Windows 7 and can be used, but offline in XP mode. If I click Attach it will work in XP mode, but then shows as offline in Windows 7 and can't be used. Integration features the Printers box is check, as well as enable at startup.
Is it possible to use the printer on both machines without havind to attach and unattach it?
I own an HP G-62-347 Notebook, Windows 7 64 bit, Microsoft Security Essentials, Windows Firewall, no other real time AV, no other Firewalls, Windows Defender disabled as Microsoft instrucs for MSE, 3 GB Raam, 313 GB HDD, AMD Dual Core P-380 processor.My Laptop began freezing 8-10 minutes after bootup logon. No matter what I was doing, Media, Excell, Word, it would freeze up and hang. Sometimes CTL_ALT_DLT would unfreeze it, even before the task manager appeared, but it will take 3-4 minutes with an o[ague screen and the progress "circle" moving then unfreeze, sork 1-2 minutes, freeze, etc. Then all clicks on something to activate would result in loooong (long) delays, 15 to 45 seconds, then the new screen or window or peogram would open, sometimes frozen up.This did not happen in safe mode.I have (on suggestions) removed all things from my start up or programs that other's have suggested, Google Update files, and three or four others that others had issues with that I found on the net. I have also removed programs that I had installed around then.
I have also run, in Safe Mode, MSE, MS Safety Scanner, MS malicious file remover, ESET online Scanner, my laptop is clean.I have used mscong to disable all non-microsoft items to see if that helped. It did not. Same issues.I have used startup repair, and after scanning received a message that there was a problem, but that it could not fix it, did I want to send a report to Microsoft, I checked yes and it sent me to System Restore, ran it for about a week ago which was when I had downloaded some software, and the problem still existed, which sent me back to System Repair, ran it, same error message, reported again.I used a Repair Disk to get back on the laptop a coulple of times when needed, but ultimately, the problem surfaced still.I have used ReImage Plus to rebuild all my defective Windows Files and a lot of my 3rd party defective files. And, I also did a Win 7 repair install.I am pretty convinced something is being loaded somewhere, but can't find where or who or what.Am I on the right track? Have I missed something? Am I wrong? I do not really want to do a clean re-install of Windows 7, for if I do I am reformatting everything to clean any and everything.... sort of NUKE it... but would rather find the culprit (for education purposes). And, I dislike installing and updating and setting up everything again more than I hate "boiled okra!"Anyone and Everyone that has had to do with this or similar sounding issue, please reply. I have two weeks invested, and would like to "graduate" resolving this and getting the learning experience of WHY?
I have been getting BSOD errors whenever booting into regular mode. Safe mode is fine (I have tweaked the registry so I have sound in safe mode) My system specs are in my profile, but used Winaudit for full specs. The winaudit report in formatted text is too big for an attachment. I have 2 attachments to this post, including zipped up minidumps. Could my registry tweak for sound have something to do with this? Perfmon /report was run, but it says:
An error occured while attempting to generate the report. The system cannot find the path specified.
My laptop hangs up/ freeze in normal mode. Now I can only open it on safe mode. I was only copy pasting some files couple days ago when it happened. I have to hold the power button to turn it off. I already tried system restore and reformatted it twice. I'm using HP Pavilion dm4-1160us, windows 7 64-bit.
View 12 Replies View RelatedToday I wanted to intsall Windows 8 in dual boot envirnment with Windows 7 so I created a separate 60gb partition for Windows 8 but after the partition was created, all the previous volumes like Windows 7, HP_Recovry and HP_Tools and the newly created Windows 8 partition are now dynamic plus I can't install Window 8 on that dynamic partition. Below is current situation as shown in disk management in Windows 7: [URL]
I don't want to lose my data including the Windows 7, and HP_Recovry and HP_Tools partitions. clean method to go back to basic disk mode from dynamic mode without losing data. When try to convert from dynamic to basic using easeus utility, it gave me following warning: [URL]
I have a Gateway desktop running windows 7 -64. While the system was powered on with no activity, it shut down and started to re-boot. Now every time I try to start the system it gives the message 'Reboot & select proper boot device or insert boot media and select'. From this screen you can't do anything. I'm not able to start in safe-mode either. I can get F12 to work to get to boot manager.
View 1 Replies View RelatedI can't wake my computer from sleep.
View 1 Replies View Relatedi recently got a new mobo and ever since i haven't been able to figure out how to enter safe mode. the board is an asus m5a99x evo. when i try the traditional way and tap the f8 right after start-up i am taken to a boot device menu through the asus bios and after selecting my HDD i am immediately taken to the windows 7 loading screen. is there anyway to force safe mode on restart once in windows?
View 4 Replies View Related
