Creating Multiple Partitions On A SSD?
Mar 19, 2012
If you create 2 partitions on a hard drive and copy a LARGE file from one partition to the other the copy is very slow with lots of head movement.I wonder if there is the same overhead/concept with an SSD?Yes I do realise an SSD is memory but I want to know if you partition an SSD and copy from one partition to the other is there a corresponding degradation? Considering interface turn around etc?Or, in other words, if you copy from one partition of an SSD to another partition on the same SSD will it be as fast as copying from one SSD to another completely separate identical SSD?
View 5 Replies
ADVERTISEMENT
Sep 13, 2012
I'm about to install my new 256gb SSD. This will have 3 partitions;
100mb System reserved partition
80gb Windows OS partition
The rest will be used for VHDs
So, using disk part.. are these the correct commands in the correct sequence (Having unplugged my spinners first so diskpart only sees one drive
select disk 0
clean
create partition primary size=100 align=1024
create partition primary size=80000
select partition 1
format quick fs=ntfs
active
exit
Should I also be formatting the S/R partition? I will create the final partition via disk management when windows is installed. This will result in 3 partitions, all properly aligned etc. Yes? Or am I on some far off planet?
View 2 Replies
View Related
Jun 30, 2012
I have 3 identical PCs with 2 partitions: C and D.I created a system image for one PC, C only.But when I restore that system image into the other 2 PCs (using Wind7 DVD), it formats both C and D and restore.The problem is that I have data on D and I don't want it to be formatted. I only want to restore the C image.
View 9 Replies
View Related
Sep 11, 2011
I have Ghost 15 with windows 7 home premimum. I am upgrading my HD on my laptop. To a bigger HD. I can create the individual images but I can not restore onto the new HD.
View 5 Replies
View Related
Sep 22, 2012
Environment: 3 identical stationary printers and 1 laptop that's will use any 1 of the 3 given printers at different times.
Goal: to allow the laptop to be switched between the 3 printers without windows creating multiple copies of the same model printer
Problem: each time the laptop is hooked up to a new printer, windows creates another copy of the same model printer in the "printers" list.
I realize there is probably a s/n burned into the firmware of the printers that causes windows to see that it is a different printer (regardless if it's the same make and model). Is there a way to make windows think that all these printers are the same exact printer?
View 6 Replies
View Related
Dec 12, 2012
Using Windows 7-Ultimate 64 on an Acer 4530 laptop. This is a personal machine and is not networked except via wifi to my router, and via BT to a single printer. I leave the printer and BT off unless I have to print something, as I don't print daily.
Problem: When I go to print a Word doc (for example) there are multiple instances of printers named like this:
Canon Printer
Canon Printer (Copy 1)
Canon Printer (Copy 2)
Many times I have gone into Printer & Devices and removed all instances of the Copies, making the "Canon Printer" entry the only one, and set as default... but the next time I go to print (which might be a week later), I have multiple instances again.
How can I stop Windows 7 from creating copies of my printer profile?
View 6 Replies
View Related
Sep 27, 2012
I have a 6 month old Samsung ultraportable that has developed Windows problems and I am trying to re-install Windows 7 Pro. The history is that Windows 7 Home Premium came pre-installed, and I upgraded to 7 Pro right after I bought it, with no problems. Everything has been great until the last 2 weeks when the laptop would not start. After trying multiple times to recover, including the Windows recovery disc and Samsung's internal recovery options, I have given up and am now attempting a clean, fresh re-install. I have already done this once (yesterday) and I am having the same non-start problems.
In an attempt to do this in a truly clean way, I want to wipe out everything that might be leftover. My question is how to do this, particularly regarding the partitions that are already setup on the laptop. Here are the partitions that setup is finding:
Disk 0 Partition 1, 10.6 GB/0.0 MB free; "Primary"
Disk 0 Partition 1, 4.3 GB/4.3 GB free; "OEM (Reserved)"
Disk 1 Partition 1, 100 MB/70 MB free; "System"
Disk 1 Partition 2, 446 GB/393 GB free; "Primary"
Disk 1 Partition 3, 19.7 GB/959 MB free; "OEM (Reserved)" - this one is also named "SAMSUNG_REC"
Questions:
1. Should I leave all these partitions intact, or delete them and start over?
2. If I should leave them intact, into which partition should I install the fresh version of Windows 7 Pro?
3. What is your advice on whether other partitions should be set up for A) programs, and B) data (documents, photos, music, etc)?
View 7 Replies
View Related
Aug 30, 2012
i was setting up my new laptop to be a dual boot machine (W7 + Ubuntu) but got an error message that i was already at the maximum number of partitions on my HDD. there is my C drive, a G drive called data (19.53GB, containing recovery_dvd 1, 2, and 3 .iso's) and two recovery partitions ( 11GB and 100MB, the 100MB one says it is active. are both recovery drives and the G Data necessary? i burned what thought was a recovery disk when i got the computer, but looking back i think i accidently burned a system repair disk instead. i also have a backup on an external harddrive (it confirms it in the backup and restore window). 180GB in C drive so its too much to backup on to dvds at this point, unless that's what recovery_dvd iso's in G drive are for? they are small enough to burn, so i would be happy with doing that and removing both recovery partitions if necessary.
View 2 Replies
View Related
Feb 28, 2012
I use IMAP for my mail accounts to have on all my machines the same mails. But the disturbing problem with this is that it seems that each mail client uses different folder names fo the same function ...
So I use the webmailer (to see all), MS Outlook (German), Thunderbird (English) Sent mails:sent, Gesendete Nachrichten Junk mails:Junk, Junk-E-Mails Deleted mailstrash, Gelschte Nachrichten
Is there a way to tell them to use the same folders? Also Im wondering is it not possible in IMAP to have a folder hold mails and subfolders?
View 1 Replies
View Related
Mar 16, 2011
I'm fairly new to Outlook 2010. I'm creating multiple calendars for my boss to include individual calendars for each of his children, his own personal calendar, work calendar etc. Is there a way to have the master calendar be automatically updated with each new individual calendar updates and meetings without dragging over each individual entry from the multiple individual calendars into the master calendar?
View 2 Replies
View Related
Jun 26, 2011
For more than a year, my system had just one user ie my personal user. Since the past few days, I've created an account for my dad as well and I'm facing some problems now.Since I've created an account for him, I cannot log in to my account on the first attempt. After typing in the password to log in, I just see a message saying "Welcome". I have to power off my laptop, reboot it and then log in again.
View 1 Replies
View Related
Jul 3, 2012
I finally gave up on Backup My PC and went to Win 7 backup, but my external drive does not hold more than 2 backup cycles' worth of data. I'd like to use excess space (in a separate partition) on a 2 TB internal drive to offload some backups, but I can find no way of doing this.
View 1 Replies
View Related
Dec 4, 2011
I just finished setting up a triple-boot-system with Windows 7 and 2 Linux distros, and it got me thinking about the perils of making backups.Should I treat every individual partition as if it is it's own Hard Drive, meaning I only Image 1 partition at a time?Or should I image the whole drive as one, imaging all partitions?
View 1 Replies
View Related
Aug 16, 2010
I want to create three Windows 7 OS on a disk partitioned into three primaries. I would like these individual OS not to be able to reach each other during use. Sealed off from each other so to speak. Is this possible? The second disk I have partitioned into three, each partition I want to link to each individual OS and have them sealed off from eachother as well. Is this possible?
Illustration:
disk 1 OS 1 --> disk 2 partition 1.
disk 1 OS 2 --> disk 2 partition 2.
disk 1 OS 3 --> disk 2 partition 3.
Can these 3 systems with their corresponding linked partition on disk 2 be completely sealed off from each other?
View 9 Replies
View Related
Nov 11, 2012
I recently bought a dell inspiron 14r laptop. It came with windows 7 Home premium which was pre-installed. The problem with it is, the whole 640GB was allotted to a single drive C. I want to repartition the hard disk into 6 drives. But they didnot gave me the windows 7 installation disk or its serial. What should i do now? I had created the recovery discs using the manufacturer's recovery media.
View 4 Replies
View Related
Jul 21, 2011
So what I do now is:1) Delete "DosDevicesC:" in "HKEY_LOCAL_MACHINESYSTEMMountedDevices" and some other DosDevices that will have an other letter booting the clone.2) Using the free MiniTool from partitionwizard.com, I delete a partition I don't need anymore and clone the one running in it. PS: PartitionWizard will reboot and clone it unless I copy an other not active partition (previous clone) which can not have been booted yet so "DosDevicesC:" is still absent.3) Now I need to run "bcdboot f:windows /s f:" in a cmd/dos-window or batchfilewhere "f:" is the new created clone. Or use EasyBCD.4) Then I also use the free version of boot-us.com to be able to hide and protect the other not needed clones or original partition when booting and using a clone.
So I don't really need the BCD bootmanager from Windows 7. It gives only more things do to to prepare the cloned partition. I even don't need the "DosDevicesC:" in the registry, because I need to take it out before cloning. Is there a way to skip or delete the BCD and boot into the only not hidden active partition called C:, which will have any other serialnumber?Is there a way to keep "DosDevicesC:" out of the registry or change it after making a clone-copy. Maybe be able to change the registry from a non active partition with a simple batchfile. Or maybe even have "DosDevicesC:" be deleted everytime when windows is booting before it is automaticly been rewritten into the registry with the active partition?
View 2 Replies
View Related
Jan 7, 2013
Under computer I go to my drive of folders. When I click new folder either by right clicking or by hitting new folder the system then creates 2 or 3 new folders at one time. I then have to go back and delete the extra folders. At first I did not mind because it only happened once or twice and now it is every time.
View 4 Replies
View Related
Dec 9, 2012
One of my friends has a windows 7 computer with an account for himself, his mother and his 2 sisters. All the home directorys are stored in drive C. Partition D is shared. The question is, how to get a partition layout like this?
Partition 1: OS + programs
Partition 2: home partition for himself
Partition 3: home partition for his mother
Partition 4: home partition for his sister
Partition 5: home partition for his other sister
Partition 6: shared partition for some photos.
View 4 Replies
View Related
Nov 13, 2011
I am trying to get my wife's new computer up and running without any BSOD or program failures. Note that the system was not initially set up to capture the dmp files so all the earliest ones are missing. I presented the initial problems to the original seller who recommended sticking with MSE and uninstalling Norton 360 and I did that. Another forum suggested that Virtual Memory was the problem and I disabled and restored VM. Still having multiple crashes and I am hoping that I can get real help here. I do note that all the crashes have ntoskrnl.exe in the driver stack although sometimes alone and sometimes with other drivers.[CODE]
View 2 Replies
View Related
Feb 13, 2013
We have three medical clinics and the front desk staff float from clinic to clinic depending on their schedule. I only started here a few months ago and I am working on upgrading their Dell xp systems to Windows 7 systems.The problem begins to crop up when say a user named Sally will come in and sit down at this system for the first time.. Well, she needs to login, click on outlook icon, let it find her exchange PST and copy settings to her user profile, then she launches the application for the scanner that she uses to scan in ID's and insurance cards for every patient coming in.. The scanner is set to default settings and needs to be tweaked on color depth and double sided, etc.. Then after that, she needs to launch her Medical EMR application.. and then choose various options in the citrix client, ..TL;DR - Each user needs to spend 20 minutes resetting the defaults at this updated system.
Well this is fine except, I am planning on updating 2 front desk systems at each clinic, the user Sally will need to do all these things EACH time she finds herself sitting down at a system I just swapped out the previous evening.My thought is this, put a single system down in one clinic and let it sit a week giving most of the float users a chance to work on it for a day, setting all of their preferences etc.Once I get a bunch of them with user profiles on the local drive, grab an image of that drive and just deploy that to each system I roll out..Couple issues I am running into:First would be that I would have to register each Windows 7 copy with a new serial, which I have The next issue is, we have a mis-mash of Dell optiplex systems. 330's - 380's even a couple 320's..
View 2 Replies
View Related
Dec 13, 2012
I have been getting a fairly random blue screens and I cannot pin point it myself. I know a bit about diagnosing and repairing issues but this one is just a pain in my butt. I am uploading the dump files and I hope someone can give me a hand I am running a sfc scan right now to test for any problems too. Also got this off the TSG SysInfo Program.
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD Athlon(tm) II X3 445 Processor, AMD64 Family 16 Model 5 Stepping 3
Processor Count: 3
RAM: 8191 Mb
Graphics Card: NVIDIA GeForce 9600 GT, 512 Mb
Hard Drives: C: Total - 476837 MB, Free - 246483 MB;
Motherboard: BIOSTAR Group, N68S3B
Antivirus: Norton Security Suite, Updated and Enabled
View 5 Replies
View Related
Sep 7, 2012
I have attached a second monitor to my laptop which runs Windows 7, however, I need to set different resolutions for different monitors, because the display does not fit to fill the screen on both monitors.
It is also noted that the display is replicated, and I would like to have the effect of having different desktops e.g. being able to use different applications such as debugging code on one monitor on an IDE such as Visual Studio, and, viewing the browser on the other monitor.
Currently it does not seem possible since the behavior seems to be that the same resolution is replicated on both monitors.
View 2 Replies
View Related
Mar 19, 2012
I use WhoCrashed to analyze these errors but I dont know how to solve. Maybe my hardware cause these.
Processor: Intel Core 2 Quad CPU @ 2.40 Ghz
Ram: 2GB Corsair
OS: Windows 7 Ultimate 32-bit
VGA: ASUS 8600 GTS
Mainboard: ASUS Striker Extreme
View 3 Replies
View Related
Oct 31, 2009
I'm having a bit of trouble trying to get two monitors, a small 1024x768 LCD, and a 46" 1920x1080 TV, to display the same wallpaper at different resolutions. My graphics card is older, a Nvidia Quadro FX 1700, but it is perfectly capable of driving both displays at the same time. It's a minor annoyance, but I'd like to get it working if it's possible.
View 4 Replies
View Related
Jun 10, 2011
I would like to create a new user for programming purposes i.e the user will have access to computer resources only through applications I plan to write. Such a user should not be able to log in from main Win7 logon screen - in fact, the user should not even be listed on that page.
View 1 Replies
View Related
Oct 30, 2009
why is it that making a simple DVD movie that is playable in your home DVD or Xbox 360 still so hard? it was difficult under Xp, same under Vista, and now it continues with Windows 7. The built-in DVD Maker and Movie Maker work sometimes, they can't burn many types of files, and you ahve to go through a 2 hour burning process before you find out the DVD has no sound during playback!
has anyone come up with or used a DVD authoring software that works all the time, effortlessly? even Nero is a finicky one
View 3 Replies
View Related
Nov 6, 2009
Can someone direct me to a place that I can read how to create backups using Windows 7.
View 6 Replies
View Related
May 8, 2011
When i got my 500 gig internal HD, I messed up and the C: partition is too small. I can't move anything else outta the C partition into the much larger D partition. SO now I want to create a system image on my external HD, so I can re-install Win7 Pro, and not use any partitions. WELL, when i try to create a system image on this external, which sez only needs 396 gig,Windows tell me the external doesn't have enuff space for the shadow volume? There is nothing ON this external. Has 434 of 465 gig free. SO why is that NOT enuff space?
View 2 Replies
View Related
Feb 27, 2012
I'm setting up my new desktop that has Windows 7 on it.I created a SHORT CUTS FOLDER on my old computer which had icons to run programs so my desktop wouldn't be cluttered.How do I setup something like this with Windows 7?I have the used all the time programs in plain view likethe Firefox browser. moranacus has chosen the best answer to his/her question.Click here to view the answer that was selected.
View 5 Replies
View Related
Aug 6, 2011
I need to a system restore point file without getting into the desktop through Windows 7.
View 3 Replies
View Related
Dec 29, 2011
I was trying to make an system image of my Win 7 OS to my hard drive...all went well until it finally stopped with the following message: backup failed! System could not find file specified ( 0x80070002 ) close. Nothing else...how is one suppose to make sense of this? Does this mean i can never make an image file of my system? Prior to the backup, Win 7 said that it would check system to make sure its OK to make backup. After it did the checkup it gave me the go ahead to do it
View 3 Replies
View Related
