I have a 6 month old Samsung ultraportable that has developed Windows problems and I am trying to re-install Windows 7 Pro. The history is that Windows 7 Home Premium came pre-installed, and I upgraded to 7 Pro right after I bought it, with no problems. Everything has been great until the last 2 weeks when the laptop would not start. After trying multiple times to recover, including the Windows recovery disc and Samsung's internal recovery options, I have given up and am now attempting a clean, fresh re-install. I have already done this once (yesterday) and I am having the same non-start problems.
In an attempt to do this in a truly clean way, I want to wipe out everything that might be leftover. My question is how to do this, particularly regarding the partitions that are already setup on the laptop. Here are the partitions that setup is finding:
Disk 0 Partition 1, 10.6 GB/0.0 MB free; "Primary"
Disk 0 Partition 1, 4.3 GB/4.3 GB free; "OEM (Reserved)"
Disk 1 Partition 1, 100 MB/70 MB free; "System"
Disk 1 Partition 2, 446 GB/393 GB free; "Primary"
Disk 1 Partition 3, 19.7 GB/959 MB free; "OEM (Reserved)" - this one is also named "SAMSUNG_REC"
Questions:
1. Should I leave all these partitions intact, or delete them and start over?
2. If I should leave them intact, into which partition should I install the fresh version of Windows 7 Pro?
3. What is your advice on whether other partitions should be set up for A) programs, and B) data (documents, photos, music, etc)?
I was going through the instructions on TweakHound for a clean install of Windows 7. 1 -oot up from the Windows 7 installation disc.2 - Choose Repair your computer.3 - In the System Recovery Options screen, choose Use recovery tools...and click Next.4 - Open the Command Prompt.5 - Type diskpart and hit Enter.6 - Type list disk . Find the disk you wish to install Windows 7 on. If you only have one disk then it will show as disk 0. If you have multiple disks find the drive you wish to install 7 on.7 - Type select disk 0 (or use the number of the disk you wish to install Windows 7 on)(note - that is a zero)8 - Type list partition. There shouldn't be any.9 - Type create partition primary.10- Type select partition 1.11- Type active.12- Type format quick.13- When finished reboot and begin your installation.I got to step 8 and when I did a "list partition" there are 4 partitions on my machine. Partition 1 - OEM 47MBPartition 2 - Primary 51GBPartition 3 - Primary 17GBPartition 4 - Primary 4753MBWhere do I go from here? Do I use the current configuration? Delete partitions (if I do that how do I do that?) Which partitions to keep?
I finally gave up on Backup My PC and went to Win 7 backup, but my external drive does not hold more than 2 backup cycles' worth of data. I'd like to use excess space (in a separate partition) on a 2 TB internal drive to offload some backups, but I can find no way of doing this.
I want to create three Windows 7 OS on a disk partitioned into three primaries. I would like these individual OS not to be able to reach each other during use. Sealed off from each other so to speak. Is this possible? The second disk I have partitioned into three, each partition I want to link to each individual OS and have them sealed off from eachother as well. Is this possible?
Illustration: disk 1 OS 1 --> disk 2 partition 1. disk 1 OS 2 --> disk 2 partition 2. disk 1 OS 3 --> disk 2 partition 3.
Can these 3 systems with their corresponding linked partition on disk 2 be completely sealed off from each other?
So what I do now is:1) Delete "DosDevicesC:" in "HKEY_LOCAL_MACHINESYSTEMMountedDevices" and some other DosDevices that will have an other letter booting the clone.2) Using the free MiniTool from partitionwizard.com, I delete a partition I don't need anymore and clone the one running in it. PS: PartitionWizard will reboot and clone it unless I copy an other not active partition (previous clone) which can not have been booted yet so "DosDevicesC:" is still absent.3) Now I need to run "bcdboot f:windows /s f:" in a cmd/dos-window or batchfilewhere "f:" is the new created clone. Or use EasyBCD.4) Then I also use the free version of boot-us.com to be able to hide and protect the other not needed clones or original partition when booting and using a clone.
So I don't really need the BCD bootmanager from Windows 7. It gives only more things do to to prepare the cloned partition. I even don't need the "DosDevicesC:" in the registry, because I need to take it out before cloning. Is there a way to skip or delete the BCD and boot into the only not hidden active partition called C:, which will have any other serialnumber?Is there a way to keep "DosDevicesC:" out of the registry or change it after making a clone-copy. Maybe be able to change the registry from a non active partition with a simple batchfile. Or maybe even have "DosDevicesC:" be deleted everytime when windows is booting before it is automaticly been rewritten into the registry with the active partition?
If you create 2 partitions on a hard drive and copy a LARGE file from one partition to the other the copy is very slow with lots of head movement.I wonder if there is the same overhead/concept with an SSD?Yes I do realise an SSD is memory but I want to know if you partition an SSD and copy from one partition to the other is there a corresponding degradation? Considering interface turn around etc?Or, in other words, if you copy from one partition of an SSD to another partition on the same SSD will it be as fast as copying from one SSD to another completely separate identical SSD?
I have Ghost 15 with windows 7 home premimum. I am upgrading my HD on my laptop. To a bigger HD. I can create the individual images but I can not restore onto the new HD.
i was setting up my new laptop to be a dual boot machine (W7 + Ubuntu) but got an error message that i was already at the maximum number of partitions on my HDD. there is my C drive, a G drive called data (19.53GB, containing recovery_dvd 1, 2, and 3 .iso's) and two recovery partitions ( 11GB and 100MB, the 100MB one says it is active. are both recovery drives and the G Data necessary? i burned what thought was a recovery disk when i got the computer, but looking back i think i accidently burned a system repair disk instead. i also have a backup on an external harddrive (it confirms it in the backup and restore window). 180GB in C drive so its too much to backup on to dvds at this point, unless that's what recovery_dvd iso's in G drive are for? they are small enough to burn, so i would be happy with doing that and removing both recovery partitions if necessary.
I just finished setting up a triple-boot-system with Windows 7 and 2 Linux distros, and it got me thinking about the perils of making backups.Should I treat every individual partition as if it is it's own Hard Drive, meaning I only Image 1 partition at a time?Or should I image the whole drive as one, imaging all partitions?
I recently bought a dell inspiron 14r laptop. It came with windows 7 Home premium which was pre-installed. The problem with it is, the whole 640GB was allotted to a single drive C. I want to repartition the hard disk into 6 drives. But they didnot gave me the windows 7 installation disk or its serial. What should i do now? I had created the recovery discs using the manufacturer's recovery media.
I'm about to install my new 256gb SSD. This will have 3 partitions;
100mb System reserved partition 80gb Windows OS partition The rest will be used for VHDs
So, using disk part.. are these the correct commands in the correct sequence (Having unplugged my spinners first so diskpart only sees one drive
select disk 0 clean create partition primary size=100 align=1024 create partition primary size=80000 select partition 1 format quick fs=ntfs active exit
Should I also be formatting the S/R partition? I will create the final partition via disk management when windows is installed. This will result in 3 partitions, all properly aligned etc. Yes? Or am I on some far off planet?
One of my friends has a windows 7 computer with an account for himself, his mother and his 2 sisters. All the home directorys are stored in drive C. Partition D is shared. The question is, how to get a partition layout like this?
Partition 1: OS + programs Partition 2: home partition for himself Partition 3: home partition for his mother Partition 4: home partition for his sister Partition 5: home partition for his other sister Partition 6: shared partition for some photos.
We have three medical clinics and the front desk staff float from clinic to clinic depending on their schedule. I only started here a few months ago and I am working on upgrading their Dell xp systems to Windows 7 systems.The problem begins to crop up when say a user named Sally will come in and sit down at this system for the first time.. Well, she needs to login, click on outlook icon, let it find her exchange PST and copy settings to her user profile, then she launches the application for the scanner that she uses to scan in ID's and insurance cards for every patient coming in.. The scanner is set to default settings and needs to be tweaked on color depth and double sided, etc.. Then after that, she needs to launch her Medical EMR application.. and then choose various options in the citrix client, ..TL;DR - Each user needs to spend 20 minutes resetting the defaults at this updated system. Well this is fine except, I am planning on updating 2 front desk systems at each clinic, the user Sally will need to do all these things EACH time she finds herself sitting down at a system I just swapped out the previous evening.My thought is this, put a single system down in one clinic and let it sit a week giving most of the float users a chance to work on it for a day, setting all of their preferences etc.Once I get a bunch of them with user profiles on the local drive, grab an image of that drive and just deploy that to each system I roll out..Couple issues I am running into:First would be that I would have to register each Windows 7 copy with a new serial, which I have The next issue is, we have a mis-mash of Dell optiplex systems. 330's - 380's even a couple 320's..
I am trying to get my wife's new computer up and running without any BSOD or program failures. Note that the system was not initially set up to capture the dmp files so all the earliest ones are missing. I presented the initial problems to the original seller who recommended sticking with MSE and uninstalling Norton 360 and I did that. Another forum suggested that Virtual Memory was the problem and I disabled and restored VM. Still having multiple crashes and I am hoping that I can get real help here. I do note that all the crashes have ntoskrnl.exe in the driver stack although sometimes alone and sometimes with other drivers.[CODE]
I have been getting a fairly random blue screens and I cannot pin point it myself. I know a bit about diagnosing and repairing issues but this one is just a pain in my butt. I am uploading the dump files and I hope someone can give me a hand I am running a sfc scan right now to test for any problems too. Also got this off the TSG SysInfo Program.
Tech Support Guy System Info Utility version 1.0.0.2 OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit Processor: AMD Athlon(tm) II X3 445 Processor, AMD64 Family 16 Model 5 Stepping 3 Processor Count: 3 RAM: 8191 Mb Graphics Card: NVIDIA GeForce 9600 GT, 512 Mb Hard Drives: C: Total - 476837 MB, Free - 246483 MB; Motherboard: BIOSTAR Group, N68S3B Antivirus: Norton Security Suite, Updated and Enabled
I have attached a second monitor to my laptop which runs Windows 7, however, I need to set different resolutions for different monitors, because the display does not fit to fill the screen on both monitors.
It is also noted that the display is replicated, and I would like to have the effect of having different desktops e.g. being able to use different applications such as debugging code on one monitor on an IDE such as Visual Studio, and, viewing the browser on the other monitor.
Currently it does not seem possible since the behavior seems to be that the same resolution is replicated on both monitors.
Have main computer win 7 and works fine with virgin hub. Have aquired second computer running xp pro and won't set up with hub. Keeps trying dial up and failing to recognise connection to hub.
i am re-installing WIN-7 on a previously installed WIN-7 (the same OS). But the prob is that, i had installed it with XP already loaded. Now that i want to re install WIN-7,
I recently bought a canon 7D which works perfectly with my laptop, however my existing G6 will not work with windows7 no matter what i download. I have downloaded updates to software and the latest codec but to no avail.
I have a friend who has spyware on their computer. It's a Vista machine that's so far gone that the only option would be to wipe it (unless someone else has a better solution).
But I have a copy of Win7 Pro from Newegg that's been used already for a computer build I did.
But, could I use this disk alongside a student license code for Win7 Pro?
i cant seem to find a thread that will tell me so, but i currently have win 7 64bit which is my main system, but also its partioned with xp, what i need to do is reinstal windows 7 again but dont want to loose my xp. do i have to delete windows 7 first before instaling, its time my pc had a good clear up.
Just this week I noticed I had a Windows Update icon in my system tray. When I opened it up I got an error stating that it could not check for windows updates. It also had the error code of 80070490. I've tried running the Readiness Tool that was suggested in the Windows knowledge base article but that didn't fix it. The only other option that I have been able to find is to re-install (or re-upgrade) my operating system. I am running Windows Vista Ultimate on this laptop and I'm not sure if I have the CD/DVD of the operating system as the OS came installed on my laptop when I got it (from Lenovo). So, I've decided that since I was going to upgrade to Windows 7 at some point, I might as well do it now.My question is I'm wondering if this Windows Update problem will somehow hamper the upgrade to Windows 7. Does anyone know? I don't want to buy the upgrade package and try to preserve my files and program installations only to have this Windows Upgrade piece be a key component of the upgrade to Windows 7 and it all fail.
For stability / application continuity reasons, when I built my computer 1.5 years ago I went with XP Home on an SSD. It's great. Boot times in a blink, even 18 months later. I knew I would eventually want to learn and migrate to Windows 7. That has pretty much happened now. My WEI is pretty low, just because of the hard drive I installed it on--I have Windows 7 64 Ultimate installed on a partition of my 1TB data drive. The poor drive has like 4 partitions. That was probably ill-advised. Anyway, I want to:Partition the SSD, keeping the XP install intact Move my Windows 7 installation to the SSD on the new partition.
I have a setup running with 1 physical SATA disk divided in two partitions (C,D). Tomorrow i am receiving an 120GB SSD. I am planning on disconnecting the HDD and plugging the SSD with AHCI enabled in the bios and performing a clean install.I need help for the steps after that, what is going to happen when i plug in the HDD in the 2nd SATA port? Will windows boot from the SSD and see the two partitions as D & E? If this is the case can i merge the 2 partitions after that and not lose any data? The purpose as you can see is to install fresh Win 7 on the SSD and plug in the HDD after that for storage purposes only but want 1 partition to it.
I have a 1TB drive I want to install windows on. There is no existing windows installation on the drive, only music, movies, and other files and documents. Is it OK to install windows without formatting this drive? I don't have anything to back up all they data.
i have a windows7 laptop and i have to install windowsxp. but the problem is that there is an error screen after showing the ''SET UP IS STARTING WINDOWS'
My HP mini laptop has been distructed its program and the Swedish keyboard and word program turn up side down...I want to reboot or reformat so it will be in its normal program.
i just bought a dell latitude D40 which has win 7 starter installed for the OS. i have 3 other pc's all networked (home network) together and all have win xp prof. i would like to network the the dell (win 7 starter) to the other 3 computers but after doing some research i find that one of the pc's on the network must have win 7 for an OS.just to be sure i'm understanding correctly, is this true ? I'm probably going to have to reformat and reinstall windows on one of the pc's on the network pretty soon. when i reinstall windows, could i install win 7 starter or would i need to install the full blown version(so that i can network the laptop to the other 3 already on the home network
I am currently running WinXP Pro SP3. If I was to install Win7 on a separate partition, would I be able to use Win Virtual PC to control the existing XP partition or would I need to re-install all the XP software onto the virtual machine?
