I finally gave up on Backup My PC and went to Win 7 backup, but my external drive does not hold more than 2 backup cycles' worth of data. I'd like to use excess space (in a separate partition) on a 2 TB internal drive to offload some backups, but I can find no way of doing this.
View 1 RepliesI have a 6 month old Samsung ultraportable that has developed Windows problems and I am trying to re-install Windows 7 Pro. The history is that Windows 7 Home Premium came pre-installed, and I upgraded to 7 Pro right after I bought it, with no problems. Everything has been great until the last 2 weeks when the laptop would not start. After trying multiple times to recover, including the Windows recovery disc and Samsung's internal recovery options, I have given up and am now attempting a clean, fresh re-install. I have already done this once (yesterday) and I am having the same non-start problems.
In an attempt to do this in a truly clean way, I want to wipe out everything that might be leftover. My question is how to do this, particularly regarding the partitions that are already setup on the laptop. Here are the partitions that setup is finding:
Disk 0 Partition 1, 10.6 GB/0.0 MB free; "Primary"
Disk 0 Partition 1, 4.3 GB/4.3 GB free; "OEM (Reserved)"
Disk 1 Partition 1, 100 MB/70 MB free; "System"
Disk 1 Partition 2, 446 GB/393 GB free; "Primary"
Disk 1 Partition 3, 19.7 GB/959 MB free; "OEM (Reserved)" - this one is also named "SAMSUNG_REC"
Questions:
1. Should I leave all these partitions intact, or delete them and start over?
2. If I should leave them intact, into which partition should I install the fresh version of Windows 7 Pro?
3. What is your advice on whether other partitions should be set up for A) programs, and B) data (documents, photos, music, etc)?
I'm using Win 7 Pro and want to schedule several backups to my NAS. With Win XP, I was able to schedule multiple backup jobs, which makes things easier since I have 116 GB of data. I like to backup my documents, email files, etc. every week, but my photos, MP3s, etc. don't change as frequently so once a month is fine for that. Not surprisingly, the media collection takes much longer to backup, which is another reason I try to separate it from my "regular" backup.Unfortunately, Win 7 backup only seems to allow one backup job to be scheduled, which seems awfully limited. Am I missing something? Are there other free backup utilities that would work better, or do I need to shell out some cash?
View 4 Replies View RelatedI want to create three Windows 7 OS on a disk partitioned into three primaries. I would like these individual OS not to be able to reach each other during use. Sealed off from each other so to speak. Is this possible? The second disk I have partitioned into three, each partition I want to link to each individual OS and have them sealed off from eachother as well. Is this possible?
Illustration:
disk 1 OS 1 --> disk 2 partition 1.
disk 1 OS 2 --> disk 2 partition 2.
disk 1 OS 3 --> disk 2 partition 3.
Can these 3 systems with their corresponding linked partition on disk 2 be completely sealed off from each other?
So what I do now is:1) Delete "DosDevicesC:" in "HKEY_LOCAL_MACHINESYSTEMMountedDevices" and some other DosDevices that will have an other letter booting the clone.2) Using the free MiniTool from partitionwizard.com, I delete a partition I don't need anymore and clone the one running in it. PS: PartitionWizard will reboot and clone it unless I copy an other not active partition (previous clone) which can not have been booted yet so "DosDevicesC:" is still absent.3) Now I need to run "bcdboot f:windows /s f:" in a cmd/dos-window or batchfilewhere "f:" is the new created clone. Or use EasyBCD.4) Then I also use the free version of boot-us.com to be able to hide and protect the other not needed clones or original partition when booting and using a clone.
So I don't really need the BCD bootmanager from Windows 7. It gives only more things do to to prepare the cloned partition. I even don't need the "DosDevicesC:" in the registry, because I need to take it out before cloning. Is there a way to skip or delete the BCD and boot into the only not hidden active partition called C:, which will have any other serialnumber?Is there a way to keep "DosDevicesC:" out of the registry or change it after making a clone-copy. Maybe be able to change the registry from a non active partition with a simple batchfile. Or maybe even have "DosDevicesC:" be deleted everytime when windows is booting before it is automaticly been rewritten into the registry with the active partition?
If you create 2 partitions on a hard drive and copy a LARGE file from one partition to the other the copy is very slow with lots of head movement.I wonder if there is the same overhead/concept with an SSD?Yes I do realise an SSD is memory but I want to know if you partition an SSD and copy from one partition to the other is there a corresponding degradation? Considering interface turn around etc?Or, in other words, if you copy from one partition of an SSD to another partition on the same SSD will it be as fast as copying from one SSD to another completely separate identical SSD?
View 5 Replies View RelatedI have Ghost 15 with windows 7 home premimum. I am upgrading my HD on my laptop. To a bigger HD. I can create the individual images but I can not restore onto the new HD.
View 5 Replies View Relatedi was setting up my new laptop to be a dual boot machine (W7 + Ubuntu) but got an error message that i was already at the maximum number of partitions on my HDD. there is my C drive, a G drive called data (19.53GB, containing recovery_dvd 1, 2, and 3 .iso's) and two recovery partitions ( 11GB and 100MB, the 100MB one says it is active. are both recovery drives and the G Data necessary? i burned what thought was a recovery disk when i got the computer, but looking back i think i accidently burned a system repair disk instead. i also have a backup on an external harddrive (it confirms it in the backup and restore window). 180GB in C drive so its too much to backup on to dvds at this point, unless that's what recovery_dvd iso's in G drive are for? they are small enough to burn, so i would be happy with doing that and removing both recovery partitions if necessary.
View 2 Replies View RelatedI just finished setting up a triple-boot-system with Windows 7 and 2 Linux distros, and it got me thinking about the perils of making backups.Should I treat every individual partition as if it is it's own Hard Drive, meaning I only Image 1 partition at a time?Or should I image the whole drive as one, imaging all partitions?
View 1 Replies View Relatedi have speakers connected to the hdmi and have a fm transmitter connected to the headphones jack. how do i get the soud to come out of both? Picture:
View 2 Replies View RelatedI have a 320GB Seagate Hard Drive. It has 2 partitions and I used 1 for projects and recordings, and the other for backup. Now I have a WD Caviar Blue 500GB that I plan to use for projects and recordings. Is it possible to backup to both partitions on the Seagate hard drive? Someone on OCN told me that you can't already do it with native Windows backup.
View 9 Replies View RelatedI recently bought a dell inspiron 14r laptop. It came with windows 7 Home premium which was pre-installed. The problem with it is, the whole 640GB was allotted to a single drive C. I want to repartition the hard disk into 6 drives. But they didnot gave me the windows 7 installation disk or its serial. What should i do now? I had created the recovery discs using the manufacturer's recovery media.
View 4 Replies View RelatedI'm running Windows 7 Professional, Asus P8Z77-V LK motherboard, and an Asus 660ti.I want to have 3 devices connected through audio out.My monitor connected via HDMI, 2.1 Logitech speakers via a headphone jack, and my Astro Mixamp also via a headphone jack.However with the current setup I can't have audio play through my monitor while the mixamp is connected. Is there a way to fix this with software? Either the Realtek HD Audio Manager or the windows audio manager? I want it to output to both so I can simply take off my headset when I want to use the monitor speakers or mute the tv when I have my headset on. I don't want to have to unplug the mixamp in order to use the monitor speakers.
View 3 Replies View RelatedWhen physically moving a HDD that was on one motherboard to a another motherboard is it recommended to back up all partitions for the HDD or just as long as you have the active windows partition HDD backed up, it doesn't matter?
View 3 Replies View RelatedI'm about to install my new 256gb SSD. This will have 3 partitions;
100mb System reserved partition
80gb Windows OS partition
The rest will be used for VHDs
So, using disk part.. are these the correct commands in the correct sequence (Having unplugged my spinners first so diskpart only sees one drive
select disk 0
clean
create partition primary size=100 align=1024
create partition primary size=80000
select partition 1
format quick fs=ntfs
active
exit
Should I also be formatting the S/R partition? I will create the final partition via disk management when windows is installed. This will result in 3 partitions, all properly aligned etc. Yes? Or am I on some far off planet?
When streaming Netflix, my computer is registering as a new device each time I play a movie. The Device ID is different when I check on all my registered devices (the only device that uses my account is my one computer). I have not changed any settings, reinstalled Windows, or made any drastic changes in the system. I do not use a router and am using Cox Communications as my ISP.
[URL]
I have Windows 7 Ultimate and am trying to setup a backup of some files using the inbuilt 'Set UP Backup' utility but in the list of backup destination devices I can only see the DVD drive even thought I have a USB stick plugged in. I have tried the USB stick in all 3 available ports but no luck.
View 1 Replies View RelatedI managed to do a drive image that also included my storage drive on an internal 1TB SATA drive.This, however, was the only one I was able to do. When I tried to run backup a second time, it would start, but then completely hang with only the occasional HD light blink. I stopped the backup, but it never said the back up stopped. I then tried to shut down and it got as far as saying it was shutting down, but never actually did. I had to power down. I tried a second time and the results were the same. Not even an entry in log files.
View 5 Replies View RelatedI recently for the first time went over my monthly data cap for broadband and looking it to it a bit more it looks like a lot of the programs my kids are using are hogging the bandwidth. I don't really want to pay for more bandwidth (as I already pay way above average as I live in a small rural village) but I don't want to restrict too much what my kids are doing. The solution to me seems to be to see if I can monitor and if possible control to some extent the data on each of the IP connected to the router if that is at all possible. I have looked at my router settings and unfortunately they do not permit anything more than traffic monitoring and there are no custom firmwares to allows additional features of any use. Is there any software that I could use to do this?
View 1 Replies View Relatedi just bought a new computer running windows 7 home edition. my question is, can windows 7 make an entire image of my hard drive including (and this important) the recovery partition? If It can can anyone please tell me how. i need to have a complete backup of my hard drive in case of hard drive failure.
View 1 Replies View RelatedI have Asus N55SF laptop, with Windows 7 SP1 64 bit. Also, I have 2 external hard drives. One with USB 3.0, and one USB 2.0. Following problems, I am going to describe below, happen to the both of them. Just to mention, external drives are tested on desktop computer and following problems do not happen.
Let me now describe what happens when I try certain actions:
- When I try to copy large files (10 or more GB) I get an error that destination is no longer visible. External drives disappear from My Computer and I can't do safe remove. But when I copy files using programs FastCopy or TeraCopy everything copies well and drives do not disappear.
- When I try to do Windows Backup and encrypt them using BitLocker drives also disappear, and are not visible within OS.
There is a difference between external hard with USB 3.0 port and the one with 2.0 port:
- When one with 3.0 disappears after described actions I can't see it from Device Manager, I can see it only after windows reboot. USB 3.0 disk connects to one USB 3.0 port on laptop.
- When one with 2.0 port disappears I can see it from Device Manager, and I only have to unplug it, and plug it in again to see it. USB 2.0 disk connects to 2 USB 2.0 ports on laptop.
Common to both disks is that when then disappear from My computer the diode on the external disk cases are still flashing, what probably means that they have some power. Both disk are formated to NTFS, and Allocation unit size is set to: Default. Their removal policy is set to: Better performance (default). On laptop I only have Windows, Office and Asus drivers. Antivirus is: MSE.
I just upgraded from Vista to Windows 7 Home Premium x32. When I tried to set up Backup and Restore, I got the message "System image cannot be saved on this location." More Info gave me "Scheduled backup of system image is not allowed on removable devices." This seems to be a very strange message since external drives appear to be the most popular backup devices. Backup and Restore setup lists both the C: and the FToshiba external) drives but if I try to create a System Image, it does not list the Toshiba as one of the choices.
I have a Toshiba 500GB usb drive that I was working fine with Vista and Macrium Reflect. I now want to switch to MS Backup and Restore.
I use the image backup only. (Use another cool software for regular backup). The problem I have is that it keeps only the last Image.
Isn't there a possibility to have multiple images available.
I have a folder which is created by Windows on my backup drive. I just can't find more than one backup,.
Any ideas?
As per the title, I'd like to schedule multiple backup jobs; I don't see how to do this with Windows 7's built-in backup utility.
I have copied NTBACKUP and it's two associated .dll's from an XP box to my Windows 7 system; ntbackup runs if activated manually but scheduled tasks don't run.
Advice on how to schedule multiple backup jobs?
Just started setting up my backups with Comodo but suddenly realized that seemingly no name is associated with a backup. In my case I trying to create the following backups:
1. critical files: full/each-Sun
2. critical files: Inc/daily
3. studio files: full/1st-each-month
4. studio files: Inc/each-Sat
5. resource files: full/15-each-month
and so on...
But is it possible to create multiple backups using Comodo?? Or, am I just changing the full and Inc backups over and over again!How, for instance, can I check and/or change my 'critical files' backup?I have almost a T-Byte of data (I do 3D animation) which is why I like to breakup my backups.
Why does windows put two drives in the "Include a system image of drives" option ?
I only want to backup C:
What is causing this?
My F: disk is only storage no system files as i know of.
I have three audio devices on my pc (ATI HDMI, Via HD onboard and steelseries usb soundcard) and through all devices I only get audio out of the left channel. I have tried two pairs on headphones and my tv speakers all with the same results. I have looked at all the balancing end everything is set to even on both channels.
Windows 7 X64 ultimate
M4A78 PRO Mobo Via HD audio
Steel Series Usb SoundCard
One of my friends has a windows 7 computer with an account for himself, his mother and his 2 sisters. All the home directorys are stored in drive C. Partition D is shared. The question is, how to get a partition layout like this?
Partition 1: OS + programs
Partition 2: home partition for himself
Partition 3: home partition for his mother
Partition 4: home partition for his sister
Partition 5: home partition for his other sister
Partition 6: shared partition for some photos.
I have been unable to connect to anything on my wired network, for about the last week. I don't remember making any changes however, I just became unable to connect.I having done a little troubleshooting.1. I can connect to the shares of my Windows Home Server if I use the IP address. The name does not resolve.2. Flushed DNS and restarting DNS server. Flushing DNS works on one client, to allow browsing by the name & restarting DNS works on the other. However neither works after a restart.3. Only my Wifi clients are experiencing this issue. My wired clients, desktops, PS3, Xbox 360, and Boxee can connect perfectly.This issue is not limited to my server. I can't connect to shares on my desktop, nor print to my wired printer.Some network background:I have DSL through CenturyLink and have a Linksys E2000 router.
View 2 Replies View RelatedWe have three medical clinics and the front desk staff float from clinic to clinic depending on their schedule. I only started here a few months ago and I am working on upgrading their Dell xp systems to Windows 7 systems.The problem begins to crop up when say a user named Sally will come in and sit down at this system for the first time.. Well, she needs to login, click on outlook icon, let it find her exchange PST and copy settings to her user profile, then she launches the application for the scanner that she uses to scan in ID's and insurance cards for every patient coming in.. The scanner is set to default settings and needs to be tweaked on color depth and double sided, etc.. Then after that, she needs to launch her Medical EMR application.. and then choose various options in the citrix client, ..TL;DR - Each user needs to spend 20 minutes resetting the defaults at this updated system.
Well this is fine except, I am planning on updating 2 front desk systems at each clinic, the user Sally will need to do all these things EACH time she finds herself sitting down at a system I just swapped out the previous evening.My thought is this, put a single system down in one clinic and let it sit a week giving most of the float users a chance to work on it for a day, setting all of their preferences etc.Once I get a bunch of them with user profiles on the local drive, grab an image of that drive and just deploy that to each system I roll out..Couple issues I am running into:First would be that I would have to register each Windows 7 copy with a new serial, which I have The next issue is, we have a mis-mash of Dell optiplex systems. 330's - 380's even a couple 320's..
I am trying to get my wife's new computer up and running without any BSOD or program failures. Note that the system was not initially set up to capture the dmp files so all the earliest ones are missing. I presented the initial problems to the original seller who recommended sticking with MSE and uninstalling Norton 360 and I did that. Another forum suggested that Virtual Memory was the problem and I disabled and restored VM. Still having multiple crashes and I am hoping that I can get real help here. I do note that all the crashes have ntoskrnl.exe in the driver stack although sometimes alone and sometimes with other drivers.[CODE]
View 2 Replies View Related