I have three audio devices on my pc (ATI HDMI, Via HD onboard and steelseries usb soundcard) and through all devices I only get audio out of the left channel. I have tried two pairs on headphones and my tv speakers all with the same results. I have looked at all the balancing end everything is set to even on both channels.
Windows 7 X64 ultimate
M4A78 PRO Mobo Via HD audio
Steel Series Usb SoundCard
I'm running Windows 7 Professional, Asus P8Z77-V LK motherboard, and an Asus 660ti.I want to have 3 devices connected through audio out.My monitor connected via HDMI, 2.1 Logitech speakers via a headphone jack, and my Astro Mixamp also via a headphone jack.However with the current setup I can't have audio play through my monitor while the mixamp is connected. Is there a way to fix this with software? Either the Realtek HD Audio Manager or the windows audio manager? I want it to output to both so I can simply take off my headset when I want to use the monitor speakers or mute the tv when I have my headset on. I don't want to have to unplug the mixamp in order to use the monitor speakers.
View 3 Replies View RelatedThe speakers of my laptop are working properly but when i use headphones then it doesn't work. I checked the playback devices but headsets/headphones are not in the list, there is only speakers.
View 2 Replies View RelatedI first noticed this problem when I tried to open iTunes and it came up with the message 'iTunes has detected a problem with your audio configuration. Audio/video playback may not operate properly'. I also cannot listen to music or things online either.I have looked at my computer's device manager and can't find any catergory such as 'sound, video and game controllers', which one site suggested to try and check the sound card. I have also tried to update quicktime but that did nothing. I have also tried looking at 'sound' and under both the playback and recording columns it says that there are no audio devices installed. THis appears to be the common phrase along a problem with the audio configuration. This has not ever happened to my computer before and I have had it for about 3 years now. It is a toshiba laptop with windows 7 home premium.
View 5 Replies View Relatedcan i get any audio manager with 4.1 channel support
View 3 Replies View Relatedhow to enable 5.1 audio channel.configure option is disabled in sound settings.??
View 1 Replies View Relatedis it possible to change an audio output with hot keys?for eg to play music through my headphones i use my xfi elite sound card and when i use my hifi speakers i use my onboard cards spdif out,to do this at the moment i have to go into playback devices and change default play back device, is there a way i can use say ctrl+alt+Q to do this?
View 3 Replies View RelatedJust bought a new set of desktop speakers. The volume and tone controls are on the right-side speaker. As I use my mouse, right handed, and the volume control more or less together for some work, this is a bit of a pain.
I can, of course, just move the speakers, but my son objects; for some videos and games, I guess it is important to have right-right, and left-left.
I have the Creative/Soundblaster audio setup. If I do interchange the speakers to the way I like, is there any option, anywhere, where I can have the left channel sound now going to the right speaker, and the right channel sound going to the left speaker ?
Creative, and the MS Audio options doesn't seem to have a way. I don't want to re-wire any plugs.
First i want to apologize for my bad english since i'm italian So.. I just installed windows7 ultimate and suddenly the right audio channel is not working.
1) I want to make clear i've tried different cables and headphones/speakers (i'm a producer so i've got plenty..) and i can't hear the right channel at all.
2) I tried to download latest version of Realtek
3) On audio configuration when i press the configure button when i tried the right audio channel i could hear it very low (like the left channel is at least 10 times higher). that is the only situation in wich i can hear something coming out from my right speaker (and is like a 90w monitor.. so i think i'll hear it otherwise)
4) Since i just installed everything i tried to format and re-install, but i got no results
5) I tried the bit/hz thing but with ANY configuration i don't get any result
6) And now a very odd thing: since i got an external audio interface i tried even with that. right channel still not working.
When i try to run Insane 2 (in2ane) and Lord of the rings War in the north on my Windows 7 Ultimate x64 I hear no sound from the mentioned sound codec.If I try to run GTA 4 or any other game it works very fine.
View 1 Replies View Relatedi recently change my windows from XP to windows 7. my VGA also change to a new one. when i test the sound, i cant hear at all !! i go to the contol panel, and check the sound, its say "No Audio Device Installed". i check again through the device manager, in sound,video it seem High Definition Audio Device (not my audio device) and NVIDIA high definition sound. under the other driver, there a ! icon or Unknown Device.
View 4 Replies View RelatedSo i have a headset i use for gaming and it has a headphone and a mic jack, at the moment i have it set up so i can hear my xbox 360 and my computer sound at the same time with my xbox sound coming from the line in jack. When i try to use my mic however it uses my xbox sound instead i can get my mic to work if i unplug the line in jack coming from my xbox but then i cant hear my xbox. So i was wondering if there is anyway i could use both at the same time.
View 1 Replies View RelatedI don't have Mic Boosting slider on my Audio after adding Audio Fx to the audio driver.
View 1 Replies View RelatedToday I noticed all my audio-devices in the audio menu were gone except for my USB Headset, I have my speakers connected with a normal cable and these did not show up. I checked my device manager and indeed it showed yellow exclamation marks on the Realtek high definition audio and AMD HD audio drivers. Strange, so I installed the newest realtek drivers, and at the end of the installation this caused a "ks.sys error" blue screen. Trying to reinstall the drivers in safe mode works fine, but when logging back into windows I get the blue screen. I can use windows just fine with my headset plugged in, but I'd like to be able to use my speakers again.
View 1 Replies View RelatedRecently got a USB headset, and I have speakers plugged in as well. How do I switch between the two when I want audio to only come from speakers and vice versa? I took this screenshot [url]...
View 2 Replies View RelatedI like to play different games, and stream movies or shows at the same time on my TV which is hooked up. I recently upgraded my comp to a full custom build (z77 sabertooth, i5-3570k, 16GB ram, Windows 7 Professional 64 bit) and can't figure out how to set my audio playback devices to play separately. On my previous comp, which had Windows Vista Home Premium, whenever I changed the default playback whatever audio was playing already would stay on the devices it was playing on and whatever new windows I opened would play on the new default device. I've looked and looked but can't find any options similar to this.
How can I set my comp so that I can play one audio through my tv and separate audio through speakers?
My PC is connected to two monitors, one to EVGA GTX 560 Ti 448, the other to IGP, both with DVI-D. The former is the main, mostly for me, while the other is used for my wife to watch streaming video. This setting has no problem when I do web surfing or work on office, but reveals an issue when I want to play game, because of two different audio sources - streaming video vs. game. First, I enabled multiple streaming device on Realtek Audio Manager, and then set a game, Portal 2 in this case, audio to headphone. But still two audio sources are being played on speaker.
My System:
i5 2400 - HD2000 enabled
MSI H67MA E45 B3 - onboard Realtek HD Audio
Windows 7 Ultimate 64 SP1
how are the installed audio device in window 7
View 2 Replies View RelatedI have an HDTV connected to my computer to serve as a monitor. I used an HDMI connection so therefore I get the computer's sound through the TV. I also have a 5.1 digital surround system that I use, connected through a Optical Digital Audio Cable.
Now my problem is, I can change between the 2 devices by going into "Playback Devices" (right clock the sound icon in the bottom right corner) and then setting either audio device as the "Default Device". However I want to play audio from both of them at once, that way I don't have to switch the settings everytime I decide to use surround sound.
Is there any simple way to do this? Or do I just have to resign myself to switching in between each time?
My specs are
Asus M5A97 motherboard
Asus Radeon HD 7850 graphics card with HDMI out (this is what my TV is connected to and gets Audio through)
Realtek HD Audio (onboard), I have both regular jacks and an Optical jack, I use the optical jack for my surround sound.
I've just bought a new computer and put it all together, installed drivers etc but no sound is working.If I go to Control PanelHardware and Sound it says "no audio devices are installed".However, if I go to Device Manager, under "Sound, video and games controllers" there are 4 instances of "NVIDIA High Definition Audio"Now I guess thie Nvidia drivers might work through the HDMI connection on the GPU, but my soiund setup is with the old audio jacks that plug in to the back of the motherboard.I tried uninstalling the nvidia audio drivers in device manager but when I rebooted they just installed themselves automatically!
View 4 Replies View RelatedI have win7 prof 64bit installed[CODE]
View 7 Replies View RelatedI recently went into my computer to install a Corsair H80 Water pump for the GPU. Anyhow, after i connected all the cables and turned on the computer again i did not have any sound. Even though im not an expert with computers, i'm pretty sure all the cables are connected right (but there is always a possibility i screwed up there).I do have sound devices, that is not the issue. After the first pc boot i had the Realtek digital output (realtek high definition audio) as the sound device. I went into the control panel and pressed sound. The previous audio device (that i had and was working) was there, but stated as "Not plugged in".So, my computer does not detect or react as i connect any headsets nor speakers. I also checked the audio in the mixer to see that it "plays sound" which i can confirm.I have searched the web for people with the same issues and tried a few "solutions" but none of them worked for me.They were:
1. Uninstall and reinstalling the drivers
2. Making sure i got the latest versions of the drivers
3. Turning on the front jack panel in the Realtek HD Audio Manager, which resulted with the speakers apparing to be connected and works according to the computer but still no sound.
4. Tried different speakers and headphones.
After trying several things im starting to believe it might be me who failed at connecting the computer. But if so i have no idea how to fix it, as it does not matter if i connect the audio cable instead of the HD audio cable or if i leave them unconnected.My os is Windows 7 Ultimate.I got an Intel motherbord DX58SO and my sound device/card is Realtek high definition audio?
Recently my audio manager pops up advising that I have diconnected my speakers however, I'll be listening to music or watching tv with no sound loss or interuption. Device manager indicates all drivers are up to date (vers: 6.0.1.6251). What's causing this and how do I correct it?
View 3 Replies View RelatedI've recently read somewhere that the fix to kernel-power restarts are to disable clashes between audio devices. However, i have 4 audio devices that seem to clash, all titled NVIDIA High Defintion audio.
View 1 Replies View Relatedsplitting audio to two separate output devices in windows 7 x64.I'm preparing my primary PC to act as a Media center. Ideally I'd like for someone to be able to watch netflix, or online videos on the TV with audio and video running through the HDMI cable while someone else can use the PC monitor & desktop speakers to game or do other tasks. The issue is both gaming applications and chrome (or other web browsers) only support audio playing through the default audio device in windows 7. As a result, i'm forced to pick whether i want all audio to play from the TV speakers or the desktop speakers.
Summary of Specs:
Asus M2N-Sli Deluxe mobo - rear port used for desktop speakers
Radeon HD 6870 - HDMI for TV sound
Athlon 64 x2 6000+
4 gigs ram
Doing some research I've learned this was a feature in win XP but was dropped in vista/7. On windows 7 support forums the Microsoft Support reply that it was an intentional omission win both windows 7 and vista.I know how to direct the audio from winamp, media player classic, and WMP to the output device of my choosing.I have tried three third party applications:Virtual Audio Cable: lets me play the same audio out both the HDMI connection and the desktop speakers.IndieVolume: shows promise as it lets me direct audio from applications to the output device i choose, but all attempts to get the software to change my web browser's output device haven't worked. I also think the software is not supported for windows 7 x64.J River - Media Center 17: media center software with an embedded web browser. Using this media center i can direct the audio from any media on my computer to the audio device of my choosing, but the embedded web browser plays out of windows default output device not the audio device i choose.
I've installed shark007 codec pack, now wmp plays everything, but when I try to play avi file with more than 1 audio stream, all of them bigin to play simultaneously, creating a huge mess. Am I able to choose just 1 stream in WMP as I can in media player classic, etc.?
View 2 Replies View RelatedI currently have a dual screen setup, the primary a computer monitor and the secondary an HDTV hooked up via HDMI cable. Accordingly I have 2 sound setups; a set of speakers at my desk and the other is the TV's speakers.
The problem is most programs have no option to choose the audio playback device. Everything goes to the default in Windows, so I have to manually change it every time to either the TV or the speakers. I only really use the HDTV to watch videos and want only the sound from that specific program to play on the TV, and everything else on my desk speakers.
I had a workaround to this in Vista. By setting the default audio device to the HDTV Windows would automatically switch the audio output to the speakers when disabling the secondary monitor which could be done easily with UltraMon. Windows 7 audio playback doesn't seem to detect this change so I'm wondering if anyone knows of a solution or workaround.
First post here, I did a search and did not find any specific answer to my problem. Firstly I am running Win 7 Ultimate with an Nvidia 8600 GT video card running HDMI through the SPDIF output to the graphics card.
My problem is getting my pc to duplicate to my HDTV when I hit the windows+p shortcut and select the duplicate option everything goes OK and I get pics on both monitors. The problem is that my PC changes resolution and slightly distorts. By distorts I mean circles look like eggs but HDTV is fine.
My monitor is set to 1920x1280. I have the latest drivers installed and have re-installed them twice to be sure. I get them same error using the Nvidia Control panel, when running XP I had no problems at all doing this and running the correct resolution on both outputs.
The other problem is when using VLC I get audio out to the HDTV no problem but when I try and use Windows Media center or player I get no sound at all.
I want to put speakers out on my patio, could i have 2 sets of speakers hooked up to my PC and switch which ones the music is sent to as and when? will i need anything special as in hardware or software?
View 2 Replies View RelatedI have a BLUEETOOTH dongle attached to each of my 3 systems. I use BLUETOOTH as my default audio device The sound quality is great.(Far better than that of a laptop.) I have a BLUETOOTH reciever attached to my stereo system, used for streaming PANDORA radio. I also have several other portable BLUETOOTH recievers, one of which I like to use outside on the deck. Why is it that WINDOWS 7 only allows 1 audio device to be used at a time. I would like to stream audio to multiple BLUETOOTH devices, but WINDOWS 7 does not allow that. When right clicking on the speaker icon to bring up "playback devices", only one device is allowed to be set as default! Also, if I want to pair with a second device, a pop up window tells me that I must first disconnect the device that is already paired, before I can pair a different device.
View 2 Replies View RelatedA long time ago I filmed a play for my school and had recorded the audio from a sound board of the microphones. Also using a camcorder there is audio from that source as well.
I need to find a way to synchronize the audio from both sources.
What would be the easiest way to do this?
