So i have a headset i use for gaming and it has a headphone and a mic jack, at the moment i have it set up so i can hear my xbox 360 and my computer sound at the same time with my xbox sound coming from the line in jack. When i try to use my mic however it uses my xbox sound instead i can get my mic to work if i unplug the line in jack coming from my xbox but then i cant hear my xbox. So i was wondering if there is anyway i could use both at the same time.
I have three audio devices on my pc (ATI HDMI, Via HD onboard and steelseries usb soundcard) and through all devices I only get audio out of the left channel. I have tried two pairs on headphones and my tv speakers all with the same results. I have looked at all the balancing end everything is set to even on both channels.
Windows 7 X64 ultimate M4A78 PRO Mobo Via HD audio Steel Series Usb SoundCard
I first noticed this problem when I tried to open iTunes and it came up with the message 'iTunes has detected a problem with your audio configuration. Audio/video playback may not operate properly'. I also cannot listen to music or things online either.I have looked at my computer's device manager and can't find any catergory such as 'sound, video and game controllers', which one site suggested to try and check the sound card. I have also tried to update quicktime but that did nothing. I have also tried looking at 'sound' and under both the playback and recording columns it says that there are no audio devices installed. THis appears to be the common phrase along a problem with the audio configuration. This has not ever happened to my computer before and I have had it for about 3 years now. It is a toshiba laptop with windows 7 home premium.
i recently change my windows from XP to windows 7. my VGA also change to a new one. when i test the sound, i cant hear at all !! i go to the contol panel, and check the sound, its say "No Audio Device Installed". i check again through the device manager, in sound,video it seem High Definition Audio Device (not my audio device) and NVIDIA high definition sound. under the other driver, there a ! icon or Unknown Device.
Today I noticed all my audio-devices in the audio menu were gone except for my USB Headset, I have my speakers connected with a normal cable and these did not show up. I checked my device manager and indeed it showed yellow exclamation marks on the Realtek high definition audio and AMD HD audio drivers. Strange, so I installed the newest realtek drivers, and at the end of the installation this caused a "ks.sys error" blue screen. Trying to reinstall the drivers in safe mode works fine, but when logging back into windows I get the blue screen. I can use windows just fine with my headset plugged in, but I'd like to be able to use my speakers again.
Recently got a USB headset, and I have speakers plugged in as well. How do I switch between the two when I want audio to only come from speakers and vice versa? I took this screenshot [url]...
I like to play different games, and stream movies or shows at the same time on my TV which is hooked up. I recently upgraded my comp to a full custom build (z77 sabertooth, i5-3570k, 16GB ram, Windows 7 Professional 64 bit) and can't figure out how to set my audio playback devices to play separately. On my previous comp, which had Windows Vista Home Premium, whenever I changed the default playback whatever audio was playing already would stay on the devices it was playing on and whatever new windows I opened would play on the new default device. I've looked and looked but can't find any options similar to this.
How can I set my comp so that I can play one audio through my tv and separate audio through speakers?
My PC is connected to two monitors, one to EVGA GTX 560 Ti 448, the other to IGP, both with DVI-D. The former is the main, mostly for me, while the other is used for my wife to watch streaming video. This setting has no problem when I do web surfing or work on office, but reveals an issue when I want to play game, because of two different audio sources - streaming video vs. game. First, I enabled multiple streaming device on Realtek Audio Manager, and then set a game, Portal 2 in this case, audio to headphone. But still two audio sources are being played on speaker.
My System:
i5 2400 - HD2000 enabled MSI H67MA E45 B3 - onboard Realtek HD Audio Windows 7 Ultimate 64 SP1
I'm running Windows 7 Professional, Asus P8Z77-V LK motherboard, and an Asus 660ti.I want to have 3 devices connected through audio out.My monitor connected via HDMI, 2.1 Logitech speakers via a headphone jack, and my Astro Mixamp also via a headphone jack.However with the current setup I can't have audio play through my monitor while the mixamp is connected. Is there a way to fix this with software? Either the Realtek HD Audio Manager or the windows audio manager? I want it to output to both so I can simply take off my headset when I want to use the monitor speakers or mute the tv when I have my headset on. I don't want to have to unplug the mixamp in order to use the monitor speakers.
I have an HDTV connected to my computer to serve as a monitor. I used an HDMI connection so therefore I get the computer's sound through the TV. I also have a 5.1 digital surround system that I use, connected through a Optical Digital Audio Cable.
Now my problem is, I can change between the 2 devices by going into "Playback Devices" (right clock the sound icon in the bottom right corner) and then setting either audio device as the "Default Device". However I want to play audio from both of them at once, that way I don't have to switch the settings everytime I decide to use surround sound.
Is there any simple way to do this? Or do I just have to resign myself to switching in between each time?
My specs are
Asus M5A97 motherboard
Asus Radeon HD 7850 graphics card with HDMI out (this is what my TV is connected to and gets Audio through)
Realtek HD Audio (onboard), I have both regular jacks and an Optical jack, I use the optical jack for my surround sound.
I've just bought a new computer and put it all together, installed drivers etc but no sound is working.If I go to Control PanelHardware and Sound it says "no audio devices are installed".However, if I go to Device Manager, under "Sound, video and games controllers" there are 4 instances of "NVIDIA High Definition Audio"Now I guess thie Nvidia drivers might work through the HDMI connection on the GPU, but my soiund setup is with the old audio jacks that plug in to the back of the motherboard.I tried uninstalling the nvidia audio drivers in device manager but when I rebooted they just installed themselves automatically!
I recently went into my computer to install a Corsair H80 Water pump for the GPU. Anyhow, after i connected all the cables and turned on the computer again i did not have any sound. Even though im not an expert with computers, i'm pretty sure all the cables are connected right (but there is always a possibility i screwed up there).I do have sound devices, that is not the issue. After the first pc boot i had the Realtek digital output (realtek high definition audio) as the sound device. I went into the control panel and pressed sound. The previous audio device (that i had and was working) was there, but stated as "Not plugged in".So, my computer does not detect or react as i connect any headsets nor speakers. I also checked the audio in the mixer to see that it "plays sound" which i can confirm.I have searched the web for people with the same issues and tried a few "solutions" but none of them worked for me.They were:
1. Uninstall and reinstalling the drivers 2. Making sure i got the latest versions of the drivers 3. Turning on the front jack panel in the Realtek HD Audio Manager, which resulted with the speakers apparing to be connected and works according to the computer but still no sound. 4. Tried different speakers and headphones.
After trying several things im starting to believe it might be me who failed at connecting the computer. But if so i have no idea how to fix it, as it does not matter if i connect the audio cable instead of the HD audio cable or if i leave them unconnected.My os is Windows 7 Ultimate.I got an Intel motherbord DX58SO and my sound device/card is Realtek high definition audio?
Recently my audio manager pops up advising that I have diconnected my speakers however, I'll be listening to music or watching tv with no sound loss or interuption. Device manager indicates all drivers are up to date (vers: 6.0.1.6251). What's causing this and how do I correct it?
I've recently read somewhere that the fix to kernel-power restarts are to disable clashes between audio devices. However, i have 4 audio devices that seem to clash, all titled NVIDIA High Defintion audio.
Im having a slight issue with one of my machines I cant track down the cause. My USB mouse and keyboard will randomly stop working. After a reboot they work fine for a few minutes then they will stop functioning. We have tried drivers and chipset drivers.
splitting audio to two separate output devices in windows 7 x64.I'm preparing my primary PC to act as a Media center. Ideally I'd like for someone to be able to watch netflix, or online videos on the TV with audio and video running through the HDMI cable while someone else can use the PC monitor & desktop speakers to game or do other tasks. The issue is both gaming applications and chrome (or other web browsers) only support audio playing through the default audio device in windows 7. As a result, i'm forced to pick whether i want all audio to play from the TV speakers or the desktop speakers.
Summary of Specs:
Asus M2N-Sli Deluxe mobo - rear port used for desktop speakers Radeon HD 6870 - HDMI for TV sound Athlon 64 x2 6000+ 4 gigs ram
Doing some research I've learned this was a feature in win XP but was dropped in vista/7. On windows 7 support forums the Microsoft Support reply that it was an intentional omission win both windows 7 and vista.I know how to direct the audio from winamp, media player classic, and WMP to the output device of my choosing.I have tried three third party applications:Virtual Audio Cable: lets me play the same audio out both the HDMI connection and the desktop speakers.IndieVolume: shows promise as it lets me direct audio from applications to the output device i choose, but all attempts to get the software to change my web browser's output device haven't worked. I also think the software is not supported for windows 7 x64.J River - Media Center 17: media center software with an embedded web browser. Using this media center i can direct the audio from any media on my computer to the audio device of my choosing, but the embedded web browser plays out of windows default output device not the audio device i choose.
I have a computer on which the usb devices stop working/receiving power once windows has loaded (they work up untill windows finishes loading). I installed windows on a different disk everything else remained the same, now the mouse and kb work. Is there a known fix for this? If not is it possible somehow to transfer the user settings from one disk to another, so i get the same settings on the new drive perhaps (mind you, no mouse or kb support on one of those windows)?I have tried a lot of windows disk fix things, none of them have any effect, very strange, have never seen this before. Usually i get pretty much everything fixed using google, but this one.
I was using my laptop fine for a few month now. I let a friend use it for a week and he "somehow" got a virus . I wasn't too stressed as i didn't have any personal information or anything important on it. So i reinstalled Windows using my flash drive, the iso from the Windows 7 Professional 64bit CD i had, and the Windows USB-DVD tool downloaded from Microsoft. I changed the boot priorities in BIOS to my USB drive, went through the installation setup and formatted all the partitions on my HDD and installed windows 7 professional 64bit. It loads up and for the most part works fine.First off my resolution will not go above 1024 x 768. Even though previously it was a lot higher, can't remember exact resolution, but was higher than that. Next, when i go to device manager, the following are listed under Other Devices with Yellow Exclamation points by them; Ethernet Controler, Network Controller, PCI Simple Communications Controller, and SM Bus Controller. I've Googled, searched these forums, and tried each solution out there. But to no avail.I purchased the laptop from Best Buy but i do not have any kind of recovery CD's.
Basically i think windows is not properly recognizing the hardware i have installed. Because the laptop screen can go to a higher resolution, but windows won't recognize it properly. Even Windows Aero isn't working properly, and the computer is marketed as a gaming laptop, so i know it has the graphical power.Feel free to explain in detail as i'm pretty good with computers but this problem has me stumped. And for a person that will not stop until something is fixed, its driving me crazy.I'm doing this off another laptop i have that has access to the internet (obviously). So if there are any programs i need to download i have the ability to do so.
I am not at all very good with computers, it even took me a minute to figure out my OS lol! but i have a serious problem: My USB drivers are no longer reading my phones and other devices the message i get is "USB Device Not Recognized", When i click the message and go through the troubleshoot it gets no where. It's like my computer doesn't even realize that the devices and drivers are malfunctioning, also i don't know if it is related but it seems like files, apps and folders are constantly being deleted without my consent and no one else has access to my pc. i suspect foul play hidden in my system.
I have USB 3.0 slots in my Dell Laptop. My desktop has a couple of these, too, but also a number that are USB 2.0. The Hauppauge HD-DVR and Media Center remote which work fine when used with USB 2.0 slots don't work in USB 3.0 slots.
I get home from work and my mouse and keyboard stopped working. I tried uninstalling and reinstalling USB controllers but no luck. They are both plug-in-play. Really not enjoying Win7, might go back to XP.
My USB 3.0 ports aren't working. I have 2 USB 3.0 front ports that are hooked up to the motherboard and 2 addition USB 3.0 ports back ports pre-installed on the motherboard. None of the four can detect my USB 2.0 devices. The USB 2.0 ports works fine.
The intergrated bluetooth doesn't seem to work. When i try to add a bluetooth device under devices and printers in control panel, it just keeps saying "Searching for devices... Make sure your device is discoverable".I found out that it didn't work, because i just bought a new microsoft notebook Bluetooth mouse 5000, and when i try to install/connect it to my computer, windows just can't find the device. I know it's not my new mouse that isn't working, because i have tried connecting other bluetooth devices aswell, but windows still can't find anything. I have both a Intel Bluetooth driver and an Atheros bluetooth driver (V7.4.0.115) installed.Both downloaded from the Asus support website.I have tried reinstalling both programs a lot of times, and i have runned a lot of different driver update programs, to check if i was using the latest versions or missing any drivers. I have spent a lot of time browsing the web to find a solution to my problem
I recently bought a new cisco e2000 router and had no problem connecting to it on all the devices in the house (about 10 of them)Just now, all the devices in my room (ipod, netbook, phone, and laptop) lost a connection to the router and no matter where I am in the house none of these 4 devices can get a connection. I can see other networks, just not mine. They all worked perfectly fine before, and out of nowhere they stopped working. Other devices that were not in my room at the time of this 'wifi surge' still have a connection to the router.The wired connection works and that's how I'm typing this right now.
My computer's onboard audio recently stopped working. The Realtek High Definition Audio Speakers suddenly show as "Not plugged in" in the Playback devices dialog.oinciding with this, five new devices, all "Speakers," all showing as "Ready" or one of the defaults, have appeared: WsAudio_DeviceS(1) through WsAudio_DeviceS(5).None of these WsAudio_DeviceS produce any audio when tested; I have tried this with both my speakers and some headphones.The Realtek Digital Output still appears as "Ready," which isn't useful, given that I don't have any S/PDIF devicesI have tried connecting some wireless headphones with a Bluetooth dongle I had lying around, but I couldn't get them to work very well (nor could I back when my speakers were working). Recording with a USB microphone works fine, but I haven't tried it through the onboard audio Line In jack
I untisalled my built in microphone somehow, so when I talk to people or try to record something, i can hear them, but they cant hear me. when i go under sounds in my control panel, and click on recording, it says "no audio devices are installed" And it wont let me click on anything else. how to i fix this?
I have been unable to connect to anything on my wired network, for about the last week. I don't remember making any changes however, I just became unable to connect.I having done a little troubleshooting.1. I can connect to the shares of my Windows Home Server if I use the IP address. The name does not resolve.2. Flushed DNS and restarting DNS server. Flushing DNS works on one client, to allow browsing by the name & restarting DNS works on the other. However neither works after a restart.3. Only my Wifi clients are experiencing this issue. My wired clients, desktops, PS3, Xbox 360, and Boxee can connect perfectly.This issue is not limited to my server. I can't connect to shares on my desktop, nor print to my wired printer.Some network background:I have DSL through CenturyLink and have a Linksys E2000 router.
They told me that there were a lot of updates that were recently applied and I'm wondering if one of them was an optional driver update provided from Microsoft for his printer. When you go into Devices and Printers the printer is shown but it isn't considered a printer, with the icon for it falling under "Unspecified" (see attached screenshot).I've seen BSOD's result from drivers for wireless adapters and video cards that were delivered via Windows update before so the first thing I tried was to go to HP's website and download the basic driver from their website, a very small download. Installation appeared to be successful and for a moment appeared to fix the problem because a queued print job started to print. But when we tried to print something else the system said there were no printers installed to use again. Also for a brief moment the printer (as well as a couple of other soft printers like the Fax option and Microsoft's PDF maker knockoff; can't remember what it's called) did appear for a minute with the green check mark over the correct printer icon. It looked like it was fixed for about a minute but then reverted back to what you see in the screenshot without any interaction from us.
