Reinstalled Windows 7 / Certain Devices Not Working

Nov 24, 2011

I was using my laptop fine for a few month now. I let a friend use it for a week and he "somehow" got a virus . I wasn't too stressed as i didn't have any personal information or anything important on it. So i reinstalled Windows using my flash drive, the iso from the Windows 7 Professional 64bit CD i had, and the Windows USB-DVD tool downloaded from Microsoft. I changed the boot priorities in BIOS to my USB drive, went through the installation setup and formatted all the partitions on my HDD and installed windows 7 professional 64bit. It loads up and for the most part works fine.First off my resolution will not go above 1024 x 768. Even though previously it was a lot higher, can't remember exact resolution, but was higher than that. Next, when i go to device manager, the following are listed under Other Devices with Yellow Exclamation points by them; Ethernet Controler, Network Controller, PCI Simple Communications Controller, and SM Bus Controller. I've Googled, searched these forums, and tried each solution out there. But to no avail.I purchased the laptop from Best Buy but i do not have any kind of recovery CD's.

Basically i think windows is not properly recognizing the hardware i have installed. Because the laptop screen can go to a higher resolution, but windows won't recognize it properly. Even Windows Aero isn't working properly, and the computer is marketed as a gaming laptop, so i know it has the graphical power.Feel free to explain in detail as i'm pretty good with computers but this problem has me stumped. And for a person that will not stop until something is fixed, its driving me crazy.I'm doing this off another laptop i have that has access to the internet (obviously). So if there are any programs i need to download i have the ability to do so.

View 9 Replies


ADVERTISEMENT

Windows 7 Reinstalled - How To Get Ethernet Controller Working

Jul 30, 2012

I've just reinstalled windows on a friends PC in an attempt to improve its performance (it was slow and virus-ridden), and now can't seem to get the ethernet controller working. I installed windows 7 pro 32 bit, the processor is an AMD athlon 64 x2 dual core processor 5200+ and the motherboard is a gigabyte M61pme-s2. I've tried the gigabyte website but there are no lan/ethernet drivers for that model.

View 3 Replies View Related

Reinstalled Windows 7 On Samsung Laptop / Lots Of Things Not Working

Oct 5, 2012

I reinstalled windows 7 64 bit on my Samsung R580 and now a lot of things aren't working. It used to have windows 7 home premium 32 bit on it from the factory. The wifi isn't connecting, the ethernet port doesn't work/ isn't connecting to internet, the hdmi output doesn't work. I used to be able to change the brightness/volume using the FN key and the arrow keys and now that doesn't work. The taskbar used to be see through and now its a solid color and I can't get it to be see through again. I think that's because something with the chipset is wrong or the driver. There used to be a power setting called Samsung optimized and now that's not there either. I don't have any of the backup file/ disks either.

View 9 Replies View Related

USB Devices Not Working After Windows Loaded

Oct 15, 2011

I have a computer on which the usb devices stop working/receiving power once windows has loaded (they work up untill windows finishes loading). I installed windows on a different disk everything else remained the same, now the mouse and kb work. Is there a known fix for this? If not is it possible somehow to transfer the user settings from one disk to another, so i get the same settings on the new drive perhaps (mind you, no mouse or kb support on one of those windows)?I have tried a lot of windows disk fix things, none of them have any effect, very strange, have never seen this before. Usually i get pretty much everything fixed using google, but this one.

View 6 Replies View Related

MTP USB Devices Not Working?

Oct 1, 2012

I want to download pictures from my samsung s11 but not successfully installed on my computer how will do it?

View 1 Replies View Related

USb Devices Stop Working

Jun 30, 2011

Im having a slight issue with one of my machines I cant track down the cause. My USB mouse and keyboard will randomly stop working. After a reboot they work fine for a few minutes then they will stop functioning. We have tried drivers and chipset drivers.

View 4 Replies View Related

How To Get Both Audio Devices Working Together

Feb 15, 2012

So i have a headset i use for gaming and it has a headphone and a mic jack, at the moment i have it set up so i can hear my xbox 360 and my computer sound at the same time with my xbox sound coming from the line in jack. When i try to use my mic however it uses my xbox sound instead i can get my mic to work if i unplug the line in jack coming from my xbox but then i cant hear my xbox. So i was wondering if there is anyway i could use both at the same time.

View 1 Replies View Related

USB Drivers Aren't Working For Devices

Jan 15, 2013

I am not at all very good with computers, it even took me a minute to figure out my OS lol! but i have a serious problem: My USB drivers are no longer reading my phones and other devices the message i get is "USB Device Not Recognized", When i click the message and go through the troubleshoot it gets no where. It's like my computer doesn't even realize that the devices and drivers are malfunctioning, also i don't know if it is related but it seems like files, apps and folders are constantly being deleted without my consent and no one else has access to my pc. i suspect foul play hidden in my system.

View 4 Replies View Related

USB 2.0 Media Center Devices Not Working In USB 3.0 Slots

Feb 7, 2012

I have USB 3.0 slots in my Dell Laptop. My desktop has a couple of these, too, but also a number that are USB 2.0. The Hauppauge HD-DVR and Media Center remote which work fine when used with USB 2.0 slots don't work in USB 3.0 slots.

View 1 Replies View Related

Plug And Play USB Devices Stopped Working

Apr 4, 2012

I get home from work and my mouse and keyboard stopped working. I tried uninstalling and reinstalling USB controllers but no luck. They are both plug-in-play. Really not enjoying Win7, might go back to XP.

View 4 Replies View Related

USB 3.0 Ports Not Working - Cannot Detect Connected Devices

Feb 19, 2013

My USB 3.0 ports aren't working. I have 2 USB 3.0 front ports that are hooked up to the motherboard and 2 addition USB 3.0 ports back ports pre-installed on the motherboard. None of the four can detect my USB 2.0 devices. The USB 2.0 ports works fine.

View 2 Replies View Related

Intergrated Bluetooth Not Working On Laptop Can't Find Any Devices?

Sep 18, 2012

The intergrated bluetooth doesn't seem to work. When i try to add a bluetooth device under devices and printers in control panel, it just keeps saying "Searching for devices... Make sure your device is discoverable".I found out that it didn't work, because i just bought a new microsoft notebook Bluetooth mouse 5000, and when i try to install/connect it to my computer, windows just can't find the device. I know it's not my new mouse that isn't working, because i have tried connecting other bluetooth devices aswell, but windows still can't find anything. I have both a Intel Bluetooth driver and an Atheros bluetooth driver (V7.4.0.115) installed.Both downloaded from the Asus support website.I have tried reinstalling both programs a lot of times, and i have runned a lot of different driver update programs, to check if i was using the latest versions or missing any drivers. I have spent a lot of time browsing the web to find a solution to my problem

View 2 Replies View Related

Wifi On All The Devices In One Room Only Randomly Stopped Working?

Jan 2, 2012

I recently bought a new cisco e2000 router and had no problem connecting to it on all the devices in the house (about 10 of them)Just now, all the devices in my room (ipod, netbook, phone, and laptop) lost a connection to the router and no matter where I am in the house none of these 4 devices can get a connection. I can see other networks, just not mine. They all worked perfectly fine before, and out of nowhere they stopped working. Other devices that were not in my room at the time of this 'wifi surge' still have a connection to the router.The wired connection works and that's how I'm typing this right now.

View 3 Replies View Related

Can't Connect Wifi Devices To Wired Devices?

Jun 25, 2011

I have been unable to connect to anything on my wired network, for about the last week. I don't remember making any changes however, I just became unable to connect.I having done a little troubleshooting.1. I can connect to the shares of my Windows Home Server if I use the IP address. The name does not resolve.2. Flushed DNS and restarting DNS server. Flushing DNS works on one client, to allow browsing by the name & restarting DNS works on the other. However neither works after a restart.3. Only my Wifi clients are experiencing this issue. My wired clients, desktops, PS3, Xbox 360, and Boxee can connect perfectly.This issue is not limited to my server. I can't connect to shares on my desktop, nor print to my wired printer.Some network background:I have DSL through CenturyLink and have a Linksys E2000 router.

View 2 Replies View Related

HP Laserjet 1018 Stopped Working; Listed Under "Unspecified" In Devices And Printers?

Aug 27, 2011

They told me that there were a lot of updates that were recently applied and I'm wondering if one of them was an optional driver update provided from Microsoft for his printer. When you go into Devices and Printers the printer is shown but it isn't considered a printer, with the icon for it falling under "Unspecified" (see attached screenshot).I've seen BSOD's result from drivers for wireless adapters and video cards that were delivered via Windows update before so the first thing I tried was to go to HP's website and download the basic driver from their website, a very small download. Installation appeared to be successful and for a moment appeared to fix the problem because a queued print job started to print. But when we tried to print something else the system said there were no printers installed to use again. Also for a brief moment the printer (as well as a couple of other soft printers like the Fax option and Microsoft's PDF maker knockoff; can't remember what it's called) did appear for a minute with the green check mark over the correct printer icon. It looked like it was fixed for about a minute but then reverted back to what you see in the screenshot without any interaction from us.

View 2 Replies View Related

Can't Reinstalled Windows 7 64 Bit

Jun 19, 2011

I was having boot problems with my p8p67 so i decided to reinstall. Well I've been having problems since apparently my HDds are in GTP rather then mbr. So when I'm selecting the hard drive in windows install it gives me errors

View 1 Replies View Related

Reinstalled Windows 7 Ultimate 64 Bit?

Feb 14, 2012

I lost my copy of windows 7 ultimate. I reinstalled windows 7. before doing this i copied down what control panel said my product key was. after reinstalling come to find out that wasnt the product key. How do i find out what my product key was.

View 7 Replies View Related

Reinstalled Windows 7 But No Drivers Found

Jul 2, 2012

I completely formatted my computer to Windows 7 Ultimate 64 bit, I put in the correct product key and then when I attempted to connect to the internet I couldn't because I don't have the correct drivers. Back when I used to use Windows XP I put a little CD in and then installed the drivers from Device Manager but now with Windows 7, I put the CD in and I can't install the drivers. They show up with a tiny symbol with a yellow exclamation mark on it (it was like this too back when I used XP, but I had no problems then,).

View 7 Replies View Related

Reinstalled Windows 7 BSOD Crash

Jul 20, 2011

I just re-installed windows 7 to my pc after a recent update caused it to completely crash. Now, about an hour after i turn on my computer it randomly decided to reboot (but not before flashing the BSOD of course).

View 2 Replies View Related

Windows 7 Reinstalled, Suddenly Get BSOD?

Sep 23, 2012

I just did a clean re install of windows 7 x64, and right off the bat got these 2 bsod's.

View 3 Replies View Related

Reinstalled Windows 7 Now HDD Wont Boot?

Apr 3, 2011

I reinstalled windows 7 on another drive I have and it wont start up. I get the BIOS flash screen and then a blinking text cursor. Nothing else.. But get this.. when I put my old HDD back in the computer allows me to select between the 2 different windows installs on both drives and it lets me boot into the fresh install on the new disk.. But only when the old disk is in.

View 2 Replies View Related

Just Reinstalled Windows 7 - How To Recover Drivers

May 23, 2012

Until recently, I was running a bootlegged Windows 7 copy. Finally I broke down and bought it from a friend at Microsoft. But now all my driver software is lost. Where can I find an online driver updater that won't kill me with viruses? And is there anything else I should do to protect my system?

View 2 Replies View Related

Reinstalled Windows 7 And Can't Connect To Internet?

Jan 21, 2012

I had to re install windows 7 and wipe my hard drive due to a BSOD, when i try to connect to the internet it says I am missing drivers, when I click download drivers it tells me it can't find any.

View 9 Replies View Related

Reinstalled Windows 7, Lost All Drivers?

Oct 6, 2012

I bought this roughly a year ago PB Tech - NBKLEN1252535B : LENOVO IdeaPad G570 Sandy Bridge i5-2410M 2.3GHz 8GB (4Gx2) DDR3 640GB 15.6" ATI HD6370M 1G DEDICATED VGA BT2.1 2.0MP HD Webcam 802.11n DVDRW HDMI Win7 Home Premium 64bit 6Cell I re-installed Windows 7 Home Premium yesterday and discovered I lost all my drivers and device management/disk management/computer manage etc shows no manufacturers name for each driver needed. tell me which drivers I need for my laptop to be running as good or as close to new as possible by what's just listed on the website?Note- I don't even have ethernet card driver!

View 2 Replies View Related

Windows 7 Reinstalled Now CPU Usage 100 Percent

Oct 20, 2010

I've reinstall my Windows 7. But now i don't know the reason why my CPU always show that 100% CPU, even when starting! I've found that in window task manager there are three processes: cmd.exe, cmd.exe*32 and again,cmd.exe, (I don't run them) and if I end them CPU usage will be normal.

View 2 Replies View Related

Reinstalled Windows 7 Now A Program Won't Open

May 28, 2011

I just reinstalled Windows 7 Home Premium because I had about 4 redirecting issues or viruses when I would use any search engine. Anyway. Now I can't run a program that ran perfectly before. I uninstalled and reinstalled. I used the compatibility trouble shooter. The only thing I haven't done is get all my drivers yet. Could not having all my drivers make a program unresponsive or do you think it is a separate problem. Like I said it worked perfect before and the only difference is I had all my drivers installed.

View 1 Replies View Related

Reinstalled Windows 7 & Now Can't Open Documents

Aug 1, 2011

I had a redirect virus...uninstalled & then reinstalled windows 7 home premium. I also saved my documents. However, when I just went to open my documents, they wouldn't open because they end in .doc

View 1 Replies View Related

Reinstalled Windows 7, Now It Won't Connect To The Internet

Dec 4, 2011

So I recently wiped my harddrive due to a blue screen and reinstalled windows 7. Now it won't connect to the internet at all. It is wired to a wireless linksys WRL54GL but does not detect it.

I was thinking I may need to update some of my network drivers, which is going to stink doing that offline. I just wanted to make sure there aren't any more routes I could go to fix this problem

View 11 Replies View Related

Reinstalled Windows 7 Now Screen Resolution Is Not Right

Jun 14, 2012

I have a Sony Vaio VGN FS115B laptop. I have just reinstalled windows 7 ultimate and now I cannot get the screen resol;ution that I need which is 1280x800.

View 4 Replies View Related

Reinstalled Windows 7 Now A Program Won't Open

Jul 27, 2012

Some sites will not open unless i right click and tell it to translate with bing.

View 1 Replies View Related

Reinstalled Windows, Wireless Adapter Not Even Found

Jun 8, 2012

I reinstalled windows 7 ,,, and it works fine but the wireless isn't even recognized so it can be enabled,,, now am using mobike to type this,,,, I tried uninstalling the network controler fro. Device manager and then restarting my pc ,,, nothing changed ,,, the network and ethernet controllers can't find their drivers I tried to search forum ,,, all people have the same problem ,,, but no clear solutions so plz if u can help then plz reply,,,, extra details : am not running any antivirus now ,,,, I have windows 7 ultimate 32 bit,,, there are no problem from the router or from the company , I can't enble my network adabter in the network and sharing ,,, there are no adapters in the change adapter setting area?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved