Just started setting up my backups with Comodo but suddenly realized that seemingly no name is associated with a backup. In my case I trying to create the following backups:
1. critical files: full/each-Sun
2. critical files: Inc/daily
3. studio files: full/1st-each-month
4. studio files: Inc/each-Sat
5. resource files: full/15-each-month
and so on...
But is it possible to create multiple backups using Comodo?? Or, am I just changing the full and Inc backups over and over again!How, for instance, can I check and/or change my 'critical files' backup?I have almost a T-Byte of data (I do 3D animation) which is why I like to breakup my backups.
I managed to do a drive image that also included my storage drive on an internal 1TB SATA drive.This, however, was the only one I was able to do. When I tried to run backup a second time, it would start, but then completely hang with only the occasional HD light blink. I stopped the backup, but it never said the back up stopped. I then tried to shut down and it got as far as saying it was shutting down, but never actually did. I had to power down. I tried a second time and the results were the same. Not even an entry in log files.
i want to have my normal backup, which is a backup of the user files on the d drive to my backup drive (drive X), now i also want to add another backup schedule, so i can backup my pictures specifically to a 4th hard drive, in this case drive drive H.
how would i add this 2nd backup on windows? is this possible? should i be looking for task manager? so far i have tried but cant find any options as access through Action Center Backup.
Is there any way to perform multiple incremental backups for multiple drives with the Windows Backup utility? The reason I ask is because my experience with the Backup utility only allows me to schedule one type of backup. My issue is that I have six hard drives in my tower and the total disk space across them is more than any disk space that most external hard drives have. Having that said, I don't have a way to incrementally backup all of my drives.Is there any third party software out there that allows me to allow me to perform multiple incremental backups for my system? Can I do this with the Windows Backup utility a different way? The built-in program does a great job but it's limited with what I want to do.
Is there a canonical way to make incremental backups that permit a full restoration from a freshly-formatted disk?I made a single system image, then set up B&R to backup all the files on all drives weekly. I can see the weekly backup directories, but they seem to be full backups, not incrementals.I was able to restore from the system image, but I didn't see a way to restore the newer files. You can't do it from within Windows, since it complains as soon as you try to overwrite a system fil
I am trying to determine what the use of the backup section of the Back up and Restore screen is for. Is it just for doing file backup or is it intended to be used also for Full System Image backups also?
I'm using Win 7 Pro and want to schedule several backups to my NAS. With Win XP, I was able to schedule multiple backup jobs, which makes things easier since I have 116 GB of data. I like to backup my documents, email files, etc. every week, but my photos, MP3s, etc. don't change as frequently so once a month is fine for that. Not surprisingly, the media collection takes much longer to backup, which is another reason I try to separate it from my "regular" backup.Unfortunately, Win 7 backup only seems to allow one backup job to be scheduled, which seems awfully limited. Am I missing something? Are there other free backup utilities that would work better, or do I need to shell out some cash?
I bought a new hd to add to my current system and have a dual boot.I am going to install Win8 (beta) on new hd, (1gb sata hi-perfomace Seagate Barracuda, 7200rpm w 32mb cache). I'm getting ready to partition the hd. I would like to have multiple partitions on hd, but I'm not real clear on a few things. First let me say that I'm not unfamiliar with partitioning a hd, just not multiple partitions for the purpose of keeping the OS, programs and data/doc separate. I have read up on creating multiple partitions, but I'm still a little confused about the type of each partition that the programs and data will go on. Once the hd is partioned and formated how is the os and program folder kept sepatate during the os install. I know the OS goes on the Primary. I'm not clear about logical and extended partitions and whether or not the programs and/or data goes on one or the other. Also, where is the MBR? Does that go on a separate partition as well or on the OS partition? I would also like to, if possible, decrease the hd data access time a little.
I regularly need to turn off windows 7 GUI settings such as aero,certain services,unload certain apps in memory, all in win 7 ultimate. These settings will always be the same. I would like to know if it is possible to create some sort of file*batch file?) which would turn these settings off, and also a separate file which would turn them back on again when i wanted them all back.
I am familiar with working with simple .bat files, and converting them into .exe's and attaching them to shortcut icons. So my only question is where do i find examples of how to write lines of code to manipulate the windows interface.
Ok, so i have a few questions. instead of making thread for each. i am posting them hear.
1. like the title says, i want to know how to create one shortcut to launch multiple programs( Two or three programs at once)?
2. My second question is, is there a way that i pin a folder on taskbar and when click on that icon.it expand( only icons and their name in small space) like a fan( pop in and out). just like the Rocketdoc.?
3. And at last. how can i prevent a program from appearing in taskbar. like i have installed a skin for WMP and i like it to stay on the desktop.
As per the title, I'd like to schedule multiple backup jobs; I don't see how to do this with Windows 7's built-in backup utility.
I have copied NTBACKUP and it's two associated .dll's from an XP box to my Windows 7 system; ntbackup runs if activated manually but scheduled tasks don't run.
Can I create a backup laptop hard drive using Windows 7 Backup? I'm hoping to create an HD that will be an exact replica of the one in my machine, so that if it crashes I can simply replace it with the backup HD and there will be no differences at all. When I tried to do this, the new HD had all the data, but when I swapped it with the current HD and tried to boot, I got a "BOOTMGR missing" message.
I finally gave up on Backup My PC and went to Win 7 backup, but my external drive does not hold more than 2 backup cycles' worth of data. I'd like to use excess space (in a separate partition) on a 2 TB internal drive to offload some backups, but I can find no way of doing this.
When I use Win 7 backup, it gives me the option each time I create a backup to create a system image. I created a system image on a CD a couple of days ago. Why does it ask me if I want to create another each time I do the backup? Is it talking about creating one on my hard drive, not a CD?
If it's just my hard drive then perhaps I should create one each time, but creating one on a CD is onerous. Plus, if this is the case, (that it wants me to create a CD) I don't know how that's to be done if the backup is on a schedule in the middle of the night.
On the Backup and Restore page, it lists the two Thread title options?-
I read that you can't restore individual files from system image, but I'm wondering if I need to create both in order to do an emergency system restore using boot disc/or... (D: drive)?
I have a Windows 7 Home Premium 32-bit with SP1 (OEM). I have already installed the Windows and activated online. Also i have installed all my motherboards drivers such as audio, lan, raid and gpu.The whole process took me around 1 hour 30 mins.Next month i'm planning to format my hdd and clean my pc (cleaning the dust from the fans, cpu).I do that every month.In the future i don't want to install Windows all over again (by installing it from a disc) it takes too long for my liking. Also with my OEM version of Windows i think you're only allowed 3 times activation by going online, then after that you have to call up Microsoft which is a hassle.What i want:
* I want to create a full system image of my whole hdd/windows/pc
* After a month or so i insert a disc or from another hdd and copy the entire image to a new hdd or a formatted hdd and have all my previous windows all installed with activated and with all drivers.
I recently purchased a new external hard drive. It is a plug and play seagate expansion. I like how Windows Backup saves all of the files that you have modified since the last backup automatically at a certain time that you designate. However when you go into the backup file, they are all zip files and have things all split up if they are big, and I have some big files. Is there a free backup software that functions like the Windows 7 Backup program but is more like an automatic copy and paste thing, or can I get Windows Backup to function as follows. For example, I want it to automatically copy and paste the files that have changed since the last time over to the external hard drive, and I want them to remain the way they are. I don't want them in the zip files, I want to be able to access a single file the same way I normally would. I don't want to have to remember all the files I've changed throughout the day and copy them over myself. So it's basically an exact copy of my Library that updates automatically when I plug the hard drive in or at a scheduled time.
C (SSD) "SYSTEM": Contains all system folders EXCEPT *Users* and *ProgramData*
D (HDD) "DATA": Users, ProgramData, and "Media" (Media is in another folder, not under the Users or ProgramData)
Z (HDD): Normally only mounted into c:BackupDrive, this volume is ONLY for backup. I am now realizing that I need to mount it as a separate volume (Z so that Windows Backup will back up to it. Also, it looks like a Windows System Backup will always include it's data in the backup, which is not desired. So I will change this.I am happy using Crashplan to back up my user directories, ProgramData and Media.I would like, however, to create a System backup that will allow me to get back up and running quickly, but it doesn't have to contain all my media and all user files.However, when I create a System Backup, Windows doesn't give me the option to exclude certain files on the D drive, since Users and ProgramData reside there. Next to Users is a Media folder with 100s of GBs of stuff I don't need included in a disaster recovery plan.Can I get Windows System Restore to create a backup without these files? Can I get it to exclude specific folders in my user directories (Music, Pictures, non-essential stuff)?
It is difficult for me to distinguish what parts of the Back up and restore screen apply just to creating a full backup and and which apply just to creating a file backup.
I know I can create a system Image by clicking in the upper left hand area of the screen (the create a system image link). But it is not clear to me how to create an incremental backup of a system image. Do I just select "Create a system Image" again, and Win 7 is smart enough to do an incremental system image backup automatically, or do I need to create some sort of schedule?
It is difficult to tell if schedules apply only to file backups or if they apply to creating a full system backup too.
I have tried every trick in the book to creat a system image whether directly or via backup computer. I am receiving those error messages; 0x8078011D when I try to create a System Image from the left bar and; 0x81000032 when using backup computer.
I'm belatedly trying to create my first system recovery backup, on a system which I first installed Windows back in November 2011.I have a 1TB drive with a 214GB partition that I set up for a backup. I manually store all my media and pictures to both a separate partition on the drive, in the cloud, and on a separate external HDD, so all I really want to back up is the system image.This is the newbie sounding question to confirm my suspicions: The system drive I'm trying to back up is definitely bigger than the partition I've set aside for recovery. My C drive is a 473GB partition, and I'm using maybe a bit more than half of that currently. If this is the case, is there a way to reallocate un-used disk space from my other partitions to make the recovery partition larger, or should I be biting the bullet and shelling out for a 500GB external to cover my system recovery needs?
I'd like to create a backup image of a clean install of Windows + certain applications.My plan is this: Format my SSD that I am currently using. Install fresh windows 7, do all the updates, install a few choice applications, and then get an image of it to use for recovery. I have a few questions on this topic as well:
1. This is probably obvious, but I want to make sure; I can store the image wherever I like, correct? If I am using an SSD for my boot drive, I can image that, and store the image on a regular hard drive, right?
2. How big will the image be? Is it going to be as big as the entire drive that I back up? I cannot imagine how it would go any differently, but I am hoping for some unrealized magic.
3. Do I need to buy the Ghost software? If not, does it make imaging a whole lot easier to make it worth the price tag?
4. How arduous and time consuming is the actual recovery process?
p.s. Something I just thought of. I don't know how I would do the actual backup without an OS to interface with so maybe I could make the image contain everything except the basic install of windows to cut down on space and time. Is this feasible?
