Clone HD To New HD With Multiple Partitions?
Sep 11, 2011I have Ghost 15 with windows 7 home premimum. I am upgrading my HD on my laptop. To a bigger HD. I can create the individual images but I can not restore onto the new HD.
View 5 RepliesI have Ghost 15 with windows 7 home premimum. I am upgrading my HD on my laptop. To a bigger HD. I can create the individual images but I can not restore onto the new HD.
View 5 RepliesI have been lurking around and posting several threads over the last few weeks regarding how to clone and copy over my windows partitions onto a SSD drive.I feel a little overwhelmed with it all can I just confirm if I can do the following as well? The following is based on me thinking that it might be best to clone the Windows 7 partition first onto the whole drive and then shrink the resulting C partition to define additional partitions for the rest - owing to my dual boot set-up.
1. Align the SSD
2. Make a System Image and create Restore Disk of my C and D Drives.
3. Back-Up the files.Place the SSD into the compartment and power up.
4. Clean Install Windows 7 REM
5. Then apply the System Repair and Install the saved System Image which will identically place the C and D drives on the SSD
6. Then take out partition software and create an ext4 partition for linux (since I have and would like to continue with a dual boot).
I cloned my old laptop hard drive to preserve my documents, movies, applications, etc and I now want to decompress the clone onto my new PC hard drive. HOWEVER my new PC already has Windows 7 installed on a second hard drive in the computer, and my laptop clone was cloned with Windows 7 (it was all on 1 hard drive partition). When I decompress the cloned image will I run into any problems with Windows folders on 2 drives, or can I delete the second windows folder?
View 1 Replies View RelatedIf you create 2 partitions on a hard drive and copy a LARGE file from one partition to the other the copy is very slow with lots of head movement.I wonder if there is the same overhead/concept with an SSD?Yes I do realise an SSD is memory but I want to know if you partition an SSD and copy from one partition to the other is there a corresponding degradation? Considering interface turn around etc?Or, in other words, if you copy from one partition of an SSD to another partition on the same SSD will it be as fast as copying from one SSD to another completely separate identical SSD?
View 5 Replies View RelatedI have a 6 month old Samsung ultraportable that has developed Windows problems and I am trying to re-install Windows 7 Pro. The history is that Windows 7 Home Premium came pre-installed, and I upgraded to 7 Pro right after I bought it, with no problems. Everything has been great until the last 2 weeks when the laptop would not start. After trying multiple times to recover, including the Windows recovery disc and Samsung's internal recovery options, I have given up and am now attempting a clean, fresh re-install. I have already done this once (yesterday) and I am having the same non-start problems.
In an attempt to do this in a truly clean way, I want to wipe out everything that might be leftover. My question is how to do this, particularly regarding the partitions that are already setup on the laptop. Here are the partitions that setup is finding:
Disk 0 Partition 1, 10.6 GB/0.0 MB free; "Primary"
Disk 0 Partition 1, 4.3 GB/4.3 GB free; "OEM (Reserved)"
Disk 1 Partition 1, 100 MB/70 MB free; "System"
Disk 1 Partition 2, 446 GB/393 GB free; "Primary"
Disk 1 Partition 3, 19.7 GB/959 MB free; "OEM (Reserved)" - this one is also named "SAMSUNG_REC"
Questions:
1. Should I leave all these partitions intact, or delete them and start over?
2. If I should leave them intact, into which partition should I install the fresh version of Windows 7 Pro?
3. What is your advice on whether other partitions should be set up for A) programs, and B) data (documents, photos, music, etc)?
i was setting up my new laptop to be a dual boot machine (W7 + Ubuntu) but got an error message that i was already at the maximum number of partitions on my HDD. there is my C drive, a G drive called data (19.53GB, containing recovery_dvd 1, 2, and 3 .iso's) and two recovery partitions ( 11GB and 100MB, the 100MB one says it is active. are both recovery drives and the G Data necessary? i burned what thought was a recovery disk when i got the computer, but looking back i think i accidently burned a system repair disk instead. i also have a backup on an external harddrive (it confirms it in the backup and restore window). 180GB in C drive so its too much to backup on to dvds at this point, unless that's what recovery_dvd iso's in G drive are for? they are small enough to burn, so i would be happy with doing that and removing both recovery partitions if necessary.
View 2 Replies View RelatedI finally gave up on Backup My PC and went to Win 7 backup, but my external drive does not hold more than 2 backup cycles' worth of data. I'd like to use excess space (in a separate partition) on a 2 TB internal drive to offload some backups, but I can find no way of doing this.
View 1 Replies View RelatedI just finished setting up a triple-boot-system with Windows 7 and 2 Linux distros, and it got me thinking about the perils of making backups.Should I treat every individual partition as if it is it's own Hard Drive, meaning I only Image 1 partition at a time?Or should I image the whole drive as one, imaging all partitions?
View 1 Replies View RelatedI want to create three Windows 7 OS on a disk partitioned into three primaries. I would like these individual OS not to be able to reach each other during use. Sealed off from each other so to speak. Is this possible? The second disk I have partitioned into three, each partition I want to link to each individual OS and have them sealed off from eachother as well. Is this possible?
Illustration:
disk 1 OS 1 --> disk 2 partition 1.
disk 1 OS 2 --> disk 2 partition 2.
disk 1 OS 3 --> disk 2 partition 3.
Can these 3 systems with their corresponding linked partition on disk 2 be completely sealed off from each other?
I recently bought a dell inspiron 14r laptop. It came with windows 7 Home premium which was pre-installed. The problem with it is, the whole 640GB was allotted to a single drive C. I want to repartition the hard disk into 6 drives. But they didnot gave me the windows 7 installation disk or its serial. What should i do now? I had created the recovery discs using the manufacturer's recovery media.
View 4 Replies View RelatedSo what I do now is:1) Delete "DosDevicesC:" in "HKEY_LOCAL_MACHINESYSTEMMountedDevices" and some other DosDevices that will have an other letter booting the clone.2) Using the free MiniTool from partitionwizard.com, I delete a partition I don't need anymore and clone the one running in it. PS: PartitionWizard will reboot and clone it unless I copy an other not active partition (previous clone) which can not have been booted yet so "DosDevicesC:" is still absent.3) Now I need to run "bcdboot f:windows /s f:" in a cmd/dos-window or batchfilewhere "f:" is the new created clone. Or use EasyBCD.4) Then I also use the free version of boot-us.com to be able to hide and protect the other not needed clones or original partition when booting and using a clone.
So I don't really need the BCD bootmanager from Windows 7. It gives only more things do to to prepare the cloned partition. I even don't need the "DosDevicesC:" in the registry, because I need to take it out before cloning. Is there a way to skip or delete the BCD and boot into the only not hidden active partition called C:, which will have any other serialnumber?Is there a way to keep "DosDevicesC:" out of the registry or change it after making a clone-copy. Maybe be able to change the registry from a non active partition with a simple batchfile. Or maybe even have "DosDevicesC:" be deleted everytime when windows is booting before it is automaticly been rewritten into the registry with the active partition?
I'm about to install my new 256gb SSD. This will have 3 partitions;
100mb System reserved partition
80gb Windows OS partition
The rest will be used for VHDs
So, using disk part.. are these the correct commands in the correct sequence (Having unplugged my spinners first so diskpart only sees one drive
select disk 0
clean
create partition primary size=100 align=1024
create partition primary size=80000
select partition 1
format quick fs=ntfs
active
exit
Should I also be formatting the S/R partition? I will create the final partition via disk management when windows is installed. This will result in 3 partitions, all properly aligned etc. Yes? Or am I on some far off planet?
One of my friends has a windows 7 computer with an account for himself, his mother and his 2 sisters. All the home directorys are stored in drive C. Partition D is shared. The question is, how to get a partition layout like this?
Partition 1: OS + programs
Partition 2: home partition for himself
Partition 3: home partition for his mother
Partition 4: home partition for his sister
Partition 5: home partition for his other sister
Partition 6: shared partition for some photos.
I built some computers for the local Verizon stores a while back and the guys have pretty much destroyed them. I would like to set up one system and clone the drive so that all four systems are identical. Each system is completely identical to the next as far as hardware goes. Can anyone suggest a high quality program to duplicate the first drive that is simple and quick? Time is very important as the systems cannot be down for to long.
View 9 Replies View RelatedBecause my current SSD has been giving me way too many problems mainly with BSODing randomly, and after reading that lots of people have similar reliability problems with the same model, I want to get a new SSD soon. However, I want to save time and just be able to clone exactly what I have onto the new drive.
I've heard that cloning from a HDD to SSD will cause problems. However I am talking about SSD to SSD.
The drive I plan on buying will still use a Sandforce controller, and will be the same capacity. Specifically my current one is the Mushkin Chronos Deluxe 240gb and I want to get the Kingston 3K HyperX 240gb.
The Kingston SSD I plan on getting should come with software that lets me clone, which I think is the Acronis one. What do I need to do to successfully and seamlessly transition my entire system onto the new SSD?
I am trying to get my wife's new computer up and running without any BSOD or program failures. Note that the system was not initially set up to capture the dmp files so all the earliest ones are missing. I presented the initial problems to the original seller who recommended sticking with MSE and uninstalling Norton 360 and I did that. Another forum suggested that Virtual Memory was the problem and I disabled and restored VM. Still having multiple crashes and I am hoping that I can get real help here. I do note that all the crashes have ntoskrnl.exe in the driver stack although sometimes alone and sometimes with other drivers.[CODE]
View 2 Replies View RelatedWe have three medical clinics and the front desk staff float from clinic to clinic depending on their schedule. I only started here a few months ago and I am working on upgrading their Dell xp systems to Windows 7 systems.The problem begins to crop up when say a user named Sally will come in and sit down at this system for the first time.. Well, she needs to login, click on outlook icon, let it find her exchange PST and copy settings to her user profile, then she launches the application for the scanner that she uses to scan in ID's and insurance cards for every patient coming in.. The scanner is set to default settings and needs to be tweaked on color depth and double sided, etc.. Then after that, she needs to launch her Medical EMR application.. and then choose various options in the citrix client, ..TL;DR - Each user needs to spend 20 minutes resetting the defaults at this updated system.
Well this is fine except, I am planning on updating 2 front desk systems at each clinic, the user Sally will need to do all these things EACH time she finds herself sitting down at a system I just swapped out the previous evening.My thought is this, put a single system down in one clinic and let it sit a week giving most of the float users a chance to work on it for a day, setting all of their preferences etc.Once I get a bunch of them with user profiles on the local drive, grab an image of that drive and just deploy that to each system I roll out..Couple issues I am running into:First would be that I would have to register each Windows 7 copy with a new serial, which I have The next issue is, we have a mis-mash of Dell optiplex systems. 330's - 380's even a couple 320's..
I got a laptop with tons of data and application, so I have got a bigger hard drive, i don�t really want to copy the data over nor reinstall the apps on the new HDD. Therefore can anyone suggest a way to clone the HDD and deploy on to the larger HDD and hopefully pop it in the laptop and off i go..
Now, this laptop is on a company domain so I don�t think any cloning tool will put it back on the domain so how does cloning work with domain laptops?
I just got a new SSD and installed it, it shows in BIOS, assigned a paritation letter (E) to it, tried to clone it with Macrium and Easeus but they Macrium displays an error after a while and Easeus just stucks after a while.
Macrium error displays: bad86d19ab8ec315621073b18526d36b.png
Easeus is just stuck at 2%.
I have one boot able CD for some computer software installations. pleas tell me how to prepare clone of this disk?
View 2 Replies View RelatedI bought a boot-able dvd for windows 7 from eBay (no key! just the dvd). Is there a way to clone it?
View 2 Replies View Relatedi'm using windows 7 pc with 2 partition on 160 gb HDD seagate.i want to backup the HDD so, i make a clone of whole HDD with Norton Ghost vis DOS. The operation successful, all files and folders are ok but windows can't boot from cloned drive<also 160 gb segate>. (i've successfully done several times with win XP)it say, hardware and software changed and need to repair with windows dvd.i did repair, windows boot but next time, it happen again requiring the windows dvd.so what software should i use to overcome this, either free or paid software will be ok? "how can i make self bootable clones?"
View 20 Replies View RelatedJust wanted to know about cloning a Windows 7 machine. What I have to do is I have a system with OEM Windows 7 Pro installed with SQL Express edition and visual studio installed, now I want to make a clone of this machine so when a new machine comes.
View 7 Replies View RelatedIs it possible to make a clone / image of a laptop setup with all the work settings etc and run that on a mac instead of osx?I can't just install windows as all the work settings would be lost and the 'IT' department won't support macs. I know it is possible, can anyone point me in the direction of it?
View 4 Replies View RelatedTech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Ultimate, Service Pack 1, 64 bit
Processor: AMD Athlon(tm) II X4 620 Processor, AMD64 Family 16 Model 5 Stepping 2
Processor Count: 4
RAM: 16126 Mb
Graphics Card: ATI Radeon HD 4200, 368 Mb
Hard Drives: C: Total - 953866 MB, Free - 854043 MB; D: Total - 953765 MB, Free - 953619 MB;
Motherboard: ASUSTeK Computer INC., M4A785TD-M EVO
Antivirus: Trend Micro Client/Server Security Agent Antivirus, Updated and Enabled
My machine is making a weird sound and I want to be prepared for the worst before I let a technician touch it.I'm running Windows 7 on my PC and am backing up files to a Microsoft Home Server but want a complete "copy" of my PC system (programs, files, settings, etc.).My head is starting to spin with everthing I've read and heard about cloning and imaging not to mention all the software choices (cloud or external hard drive) and if external hard drive is the way to go, which one.
I have an issue when trying to clone my main drive (a 64Gb SSD) whereby the clone fails shortly after starting with an Error code "Failed to prepare operations code: 10 'file system error is found' with extended code: 458,777 File record corrupt". I am using Acronis but get the same result using other cloning software. The clone partitions the destination disc and then produces the error code when looking/checking the file system. I have narrowed the issue down to the winsxs folder and in particular the files beginning amd64* & x86* by using acronis file back-up facility and attempting to back-up the winsxs file. I have copied the winsxs folder to another drive and can successfully back-up this folder in it's new location using acronis. I should add that checkdsk and SFC do not return any errors on the source files/folder and I have in the past cloned this drive successfully.
View 2 Replies View Relatedright, as some of you may know from reading my wall page my laptop was stolen. now prior to this i had made a system image, i've tried restoring that image to my new desktop system but then it wouldn't boot (apparently due to dissimilar hardware). so i've borrowed my parents laptop (same model as mine was) and restored the clone to that. now apparently there's a way to clone a system to new (different) hardware, can anybody offer me some help with this?
View 4 Replies View Relatedi have a PC to video component and would like to watch movies from my PC on my TV.
View 9 Replies View RelatedThe clone disk won't boot after clone using Ghost version 11.Tthe source disk is 146GB SSD and the clone disk is 256GB SSD
View 10 Replies View RelatedI have been getting a fairly random blue screens and I cannot pin point it myself. I know a bit about diagnosing and repairing issues but this one is just a pain in my butt. I am uploading the dump files and I hope someone can give me a hand I am running a sfc scan right now to test for any problems too. Also got this off the TSG SysInfo Program.
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD Athlon(tm) II X3 445 Processor, AMD64 Family 16 Model 5 Stepping 3
Processor Count: 3
RAM: 8191 Mb
Graphics Card: NVIDIA GeForce 9600 GT, 512 Mb
Hard Drives: C: Total - 476837 MB, Free - 246483 MB;
Motherboard: BIOSTAR Group, N68S3B
Antivirus: Norton Security Suite, Updated and Enabled
I have attached a second monitor to my laptop which runs Windows 7, however, I need to set different resolutions for different monitors, because the display does not fit to fill the screen on both monitors.
It is also noted that the display is replicated, and I would like to have the effect of having different desktops e.g. being able to use different applications such as debugging code on one monitor on an IDE such as Visual Studio, and, viewing the browser on the other monitor.
Currently it does not seem possible since the behavior seems to be that the same resolution is replicated on both monitors.