How To Clone And Copy Over Windows Partitions Onto A SSD Drive
Nov 22, 2010
I have been lurking around and posting several threads over the last few weeks regarding how to clone and copy over my windows partitions onto a SSD drive.I feel a little overwhelmed with it all can I just confirm if I can do the following as well? The following is based on me thinking that it might be best to clone the Windows 7 partition first onto the whole drive and then shrink the resulting C partition to define additional partitions for the rest - owing to my dual boot set-up.
1. Align the SSD
2. Make a System Image and create Restore Disk of my C and D Drives.
3. Back-Up the files.Place the SSD into the compartment and power up.
4. Clean Install Windows 7 REM
5. Then apply the System Repair and Install the saved System Image which will identically place the C and D drives on the SSD
6. Then take out partition software and create an ext4 partition for linux (since I have and would like to continue with a dual boot).
View 3 Replies
ADVERTISEMENT
Dec 31, 2009
I'm preparing to upgrade to 7 Pro. My current system has drive C: with XP...and Drive D: with Win 2000. I want to wipe D: and copy/clone my existing XP Pro on C: to D:...and then install fresh 7 Pro upgrade on C:
Question is what's the best way to clone/copy my good XP installation on drive C: to D: and maintain a bootable XP Pro on the newly transferred to drive D: ?
For the time being I want to set up a dual boot between my new 7 installation on C: and my XP Pro bootable installation migrated/copied/cloned to drive D:
Reason of course is my current C: drive is a much larger/faster drive than my current D: so I'd rather have Windows 7 Pro on the current C: drive with XP Pro running now
What's the best way to copy/clone XP on C: to a bootable XP on drive D: ?
View 1 Replies
View Related
Sep 11, 2011
I have Ghost 15 with windows 7 home premimum. I am upgrading my HD on my laptop. To a bigger HD. I can create the individual images but I can not restore onto the new HD.
View 5 Replies
View Related
May 14, 2011
I was wondering if there was anyway to clone or backup a Mac Hard drive from a Windows 7 machine. My friend's Mac got destroyed but managed to save the harddrive and left it with me to back up while he went on vacation.
Unfortunately I've never touched a Mac before and I'm assuming it won't even read the drive if I plug it into my PC since it uses HFS+.
I have with me the following things
- A Windows 7 PC and a Hard Drive Dock
- The 250GB HD from the broken Mac
- A Blank 256GB SSD that he wants to use.
Is there any software on Windows that will let me clone/backup the drive or read from it
View 6 Replies
View Related
Aug 9, 2011
I have a hitachi 2tb 5400rpm drive, with my OS installed on a 500GB partition (100gb free). I just got a 1tb samsung spinpoint f3 which i want to use as my boot drive. I have tried 3 methods: 1. Downloaded clonezilla, and used tuxboot to create a bootable flashdrive with clonezilla. I used the i686 image of clonezilla. I made a partition on the samsung drive which is 10GB larger than the boot partition on the hitachi. 2. I used the windows utility to make a back-up image of my bootdrive. I then made a bootable copy of windows 7 live install on a flash drive. Booted off it and tried to restore from that system image. I got an error: The system image restore failed. Error: Error details: The parameter is incorrect.(0x80070057) 3. Same as method 2, but I used a CD instead. This time, i got this error: System image restore to new drive fails. 0x80042414
View 3 Replies
View Related
Sep 26, 2011
cloning a hard drive with operating system and all.
Details: I have a couple of tablet pc's (Motion LE1700). One is in perfect shape (1), the other (2) has a physical problem with the USB ports. I have installed and configured W7 on 1. I can't do the same on 2 because I can't connect to it. I would like to make a copy of the hard drive on 1, take the hard drive out, replace it with 2's HD, copy that back, and then replace both drives.
What program do I use to clone the drive, what steps should I take, what should I look out for? The drives are 64G SSD's and I have a 500G external USB HD for the transferring. I don't want to just reinstall everything because it's a PITA, I want to copy the good drive to the other one.
View 3 Replies
View Related
Dec 9, 2011
I have Asus N55SF laptop, with Windows 7 SP1 64 bit. Also, I have 2 external hard drives. One with USB 3.0, and one USB 2.0. Following problems, I am going to describe below, happen to the both of them. Just to mention, external drives are tested on desktop computer and following problems do not happen.
Let me now describe what happens when I try certain actions:
- When I try to copy large files (10 or more GB) I get an error that destination is no longer visible. External drives disappear from My Computer and I can't do safe remove. But when I copy files using programs FastCopy or TeraCopy everything copies well and drives do not disappear.
- When I try to do Windows Backup and encrypt them using BitLocker drives also disappear, and are not visible within OS.
There is a difference between external hard with USB 3.0 port and the one with 2.0 port:
- When one with 3.0 disappears after described actions I can't see it from Device Manager, I can see it only after windows reboot. USB 3.0 disk connects to one USB 3.0 port on laptop.
- When one with 2.0 port disappears I can see it from Device Manager, and I only have to unplug it, and plug it in again to see it. USB 2.0 disk connects to 2 USB 2.0 ports on laptop.
Common to both disks is that when then disappear from My computer the diode on the external disk cases are still flashing, what probably means that they have some power. Both disk are formated to NTFS, and Allocation unit size is set to: Default. Their removal policy is set to: Better performance (default). On laptop I only have Windows, Office and Asus drivers. Antivirus is: MSE.
View 9 Replies
View Related
Jan 28, 2013
I have an issue when trying to clone my main drive (a 64Gb SSD) whereby the clone fails shortly after starting with an Error code "Failed to prepare operations code: 10 'file system error is found' with extended code: 458,777 File record corrupt". I am using Acronis but get the same result using other cloning software. The clone partitions the destination disc and then produces the error code when looking/checking the file system. I have narrowed the issue down to the winsxs folder and in particular the files beginning amd64* & x86* by using acronis file back-up facility and attempting to back-up the winsxs file. I have copied the winsxs folder to another drive and can successfully back-up this folder in it's new location using acronis. I should add that checkdsk and SFC do not return any errors on the source files/folder and I have in the past cloned this drive successfully.
View 2 Replies
View Related
Apr 7, 2012
I recently got a new SSD drive that I was interested in turning into my "System Drive" where I just keep all my system files (and some applications that I want to run fast) so that my boot speed is faster.So this is what I did: Downloaded EASEUS Disk Copy Booted it from a USB Copied my System Reserve and System Partition onto my SSD Set my System Reserve on my SSD to Active using Diskpart Changed the boot order to run my SSD first at startup Once I completed all these steps I started up my computer and after my post I get a little white bar "_" that just stays there blinking forever.I have tried changing my SATA controller to AHCI with the same result. (It's on IDE, now)Did disk copy not copy some of the files I need to boot with my SSD? Or did I not copy all the correct partitions?
View 9 Replies
View Related
Dec 7, 2012
I have a spanned volume setup with 4 drives. One of the drives is starting to throw read errors which is preventing WHS from backing it up (Yikes!).
Is it possible to clone the drive with the errors and to reinsert a new drive into the array?
Can the new drive be bigger?
View 3 Replies
View Related
Nov 14, 2012
I have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
View 3 Replies
View Related
Apr 12, 2012
I am stack at certain process while trying to load a system image onto new hard drive using Windows 7 x64 image restore function from the windows 7 disk, I got my primary drive 500 gigs with windows 7 and all my files,I made a system image onto another clean internal hard drive size 160 gigs and I was successful, now I disconnected my 500 gigs primary hard drive, attached a new 250 gig hard drive and I proceeded to load the system image, I boot to windows 7 cd,I get the option to repair , click on restore from system image file , everything looks good computer finds the hard drive 160 gigs with the system image as source,I press next look for the target drive and I see it there 250 gigs drive thats freshly formatted ..., I select the target press next it all looks good and then I get the screen that there is no target hard drive... I made sure that this hard drive is not being excluded from format and new process... I am lost ... what am I doing wrong here, I reformatted those 2 drives twice I tried this operation about 8 times , I get the error message each time I am attempting to create this new system image..
View 9 Replies
View Related
Nov 5, 2009
what I am trying to do is sort of complicated but I'll try my best to explain it. Basically I'm trying to squeeze every ounce of potential out of my nearly outdated machine.
First, my relevant system specs:
- Windows 7 Pro 64bit
- 2 IDE Hard drives - 5400rpm 80GB Maxtor, and 7200rpm 160GB Seagate
- 2 Gigs of generic grade RAM
OK so earlier today I found out about virtual memory, AKA a paging file, and about how it acts like a sort of RAM buffer, increasing performance. I also found out that I can put a paging file on each hard drive and that I could get the greatest benefit if I had each hard drive on a separate IDE channel, so I ripped open my case, rerouted the cables appropriately, changed the master/slave jumpers, reset CMOS, and booted up Windows 7.
Now here is where I make things more complicated . In the interest of getting every drop of juice out of this rotten orange, I want to move (clone) the entire Windows 7 partition from the Maxtor to the Seagate to take advantage of the extra RPMs. Except when I attempt the cloning process via Seagate Disc Wizard, I only get the option to clone the Windows 7 partition and not the reserved unallocated space used by Windows Recovery Environment.
I am unaware of how Windows 7 uses the reserved space specifically, but I assume that if I just created the unallocated space later it wouldn't instantly restore WinRE functionality. I know enough to know it has to be more complicated than that. How would I clone the Windows 7 partition and retain WinRE functionality?
Then, after that's done, do I still have to allocate some space on each hard drive for the paging files, like a Linux swap file? Or is the virtual memory reserved literally as a file in the operating system partition?
View 4 Replies
View Related
Mar 7, 2012
I have a Sony C series 64 bit laptop. I have a 2.5" IDE drive from my old laptop which has XP.
I was thinking to image Win 7 on my Sony to a cd; so that I have a clean disk. How can I then clone my XP ide drive onto the new laptop drive - which is an Hitachi ATA (mSata?) - so that I will have a dual boot system? Although if the XP works fine, that is what I will use.
I do a sysprep 1st, then use Bart PE. However I believe Bart PE only goes to XP SP3, and I only have the whole drive - with all my docs on it. No installation disk.
Do I need to do a "sysprep"? Is it possible to "slipstream" a whole drive with all the necessary drivers? Will it be an issue if the XP is 32 bit, and my new machine is 64bit?
View 6 Replies
View Related
Jun 1, 2012
I can boot up ok. But the boot drive makes clicking sound sometimes and makes the computer slower, especially when waking up from a sleepI tried using Acronis to clone the drive. It crashed as soon as the drive makes the first clicking sound and nothing is cloned.ince I can boot from the drive, if I use windows explorer to copy all the good files including the hidden files to a new drive, is there a way to then "sys" the new drive like in windows XP to make it bootable into windows 7
View 3 Replies
View Related
May 16, 2011
I used clonezilla to copy the data on my laptop drive to an external 640gb drive I had. The cloning process went fine but when I went to boot on the 640gb drive I (expectantly) got a blue screen error. Now, the way to fix this would be to boot into safe mode and delete the drivers but for some reason every time I boot and press the f8 button it brings me into the Windows Error Recovery mode menu which has no options for safe mode and doesn't help at all.
View 8 Replies
View Related
Jul 25, 2010
I had installed Windows 7 on one partition and it went bad for some unknow reason so I created another clean partion and installed win 7 on it. I also added partion for music, pictures, etc. Now the question is how do I get rid of the first version since it was giving me the BSOD. It boots as though I have dual boot but the second one listed it the one I would like to get rid of leaving user files intact.
View 3 Replies
View Related
Jan 13, 2009
I installed Windows 7 64-bit on my computer which has only 1 hard drive (640GB). I partitioned it using XP to have 4 partitions: 1) XP Partition 2) Linux Partition 3) Linux Swap 4) Windows 7.The problem is Windows 7 cannot detect any partition besides it's own partition, so I cannot access any of my data from the other partitions (XP and ubuntu --- I don't care about ubuntu but I need the data on the XP partition). I know the other partitions exist since I can access XP still, and I believe XP can detect all 4 partitions.I went to start->menu then searched for partition and selected "Create and format hard disk partitions" and it actually detected all the partitions. The problem was the other partitions did not have drive letters associated with them.So I just right clicked and changed the drive letters.
View 4 Replies
View Related
Mar 14, 2011
I just started having an issue on a clean install of Windows 7 SP1 build 7601.The icons for the W & Z partitions is suddenly showing as a broken link.I have tried right clicking on each partition > properties > customize > restore default folder picture and there is no change for either to update the icon.
View 2 Replies
View Related
Jul 14, 2009
This is very frustrating now...Yes, I know it´s because of my lack of knowledge about Windows 7 and security/permission rules and settings. But still.
Hopefully someone is kind enough to help me out a bit here and maybe I´ll understand better (hopefully)
I´ve just installed Windows 7 and this is what I want to do:
Copy my old Favorites-folder (Win Explorer 8) from the old harddrive to my new folder in Win 7.
I had some problems accessing my old folder in My Documents on the old harddrive but i changed permission and ownership and finally I could access it and copy the folder. But. It seems impossible to copy it into c:UsersxxxxxFavorites
It just says "You´ll need to provide administrator permission to copy this folder"
I´ve disabled the built in admin account and tried every fix I´ve found but I still receive the same message. How can I fix this??? Seems like a simple thing to do but i just cant get it to work.
View 2 Replies
View Related
Apr 3, 2012
how many partions are better for 500 gb hard drive
View 9 Replies
View Related
May 1, 2012
I am running W7 pro 64-bit. I have just installed a 1TB drive from another machine, which already had some onfo on it which I wanted to keep. I shrank the disk- using Disk Management- to create 2 partitions. Is it possible to un-shrink the disk?
View 1 Replies
View Related
Oct 30, 2012
Okay, so I go to do a fresh install of Windows 7 on my machine as I have sveral times. I booted from the Win 7 cd and it came to the hard drive selection page. Here's where the trouble started. I have two identical 2TB hard drives and a 3TB drive in my machine. My gut told me to unhook my 2TB drive that I use for photos and music, the other 2TB is my data (C) drive. I said to myself, "Self, you have done this so many times, no problem". Well, problem. It deleted the partitions on my data drive. It never formatted the drive though. After the first reboot, my (C) drive booted and I knew that I was in a heap of trouble.
View 3 Replies
View Related
Oct 31, 2009
I have two HDs; on the first one (80 GBs), I have four partitions, with XP on C: (and this is the boot drive), then D:, E:, and finally Vista on F:. I have another HD, a 1 TB one, which I use for storage, and I have made a lot of partitions on it, generally about 100 GB each. When I ran the setup for 7, I selected a partition on the second drive which was labelled S:. After 7 installed, and I opened My Computer, I saw that everything was messed up, and 7 was now on C:.
I know it doesn't mean it is physically on C:, it is still on the same partition of the second HD where I installed it, but it shows its partition as C:. I used Computer Management to change most of the drive letters so that they appear as they do in XP, but every time I try to change the drive letter of 7 from C: to S:, it gives an error, something about not allowed to change drive letter of system disk which has the pagefile.
So is it at all possible to force change the drive letters so that 7 is shown on S: and XP on C:. I opened C: (the 7 installation) and found many text files in system folders and program files which point to locations on C:, so if I force a change from C: to S:, what happens to all of these - do they automatically change their paths to S:, or does the whole thing just go phut!
I had the same problem when I installed Vista, but I didn't use it all that much, and so I didn't do anything about it, but I like 7, and unlike Vista which everyone said was an intermediate product until the next version came out, 7 is here to stay. I am ready to do another clean install if there is any way around this problem.
View 1 Replies
View Related
Jul 3, 2009
Ok, I have my WD 160GB Vraptor partition and dual booting Vista & Win 7 ultimate x64. Disk 0
My 750GB Samsung used to be my old XP + Vista dual booting and it is partitioned as such. Disk 1
I have finished transfering all the pertinent data to my USB WD 320Gb Passport so now I want to format the whole drive and leave it as Back-Up for Data, Videos & Music + the ocassional game that doesn't fit on my Primary drive.
Here's the kicker, I am new to Vista & 7, if I remember correctly, in XP I used to go to Disk managment, select the disk and tell it to format it and it was done (I never did this often so I could be confused).
At any rate, the choices I get with Win 7 are:
If I right click on Disk 1, my only choices are, Convert to Dynamic Disk or Offline Right clicking on either of the other Disk 1 partitions gives me more choices. Format, Shrink or Delete volume My issue is that I do not want to have 2 more partitions but a full drive. I am sure that one of those options is the one I may need but I just don't know which one to choose and I really hate to work twice (if not more) to get to where I want to go.
any help tips or directions you guy may want to throw my way?
P.S.: I think I am over thiking this and as soon as I delete the volume, the partitions will go away and I am going to end where I want but I just like to be sure.
View 4 Replies
View Related
Feb 25, 2010
When upgraded from Vista to Windows 7 , one of my partitions is not visible. This stores lot of photo-shop tutorials , songs , videos and ebooks.
Will I ever be able to get them back ?
View 5 Replies
View Related
Oct 14, 2012
Have two internal hard drives.Thought would be good to partition them for organization.Have found that this slows Lightroom down.Can I unpartition without changing or losing any of the the files?
View 8 Replies
View Related
Jan 27, 2013
sollution require as I am unable to copy to pen drive in windows 7.
View 1 Replies
View Related
Oct 22, 2011
I have a desktop PC with confused partitions (see image below).
1) C: 62.50 GB NTFS (3 GB free speace, about 2%, that's a problem)
2) 8 MB unallocated
3) "Add to C2" 66 MB NTFS
4) 39.97 GB Free space
5) D: "Data" 195.54 GB NTFS
I'd like to combine 1, 2, 3, and 4 into one partition. And then repartition in a way that allows me to install Linux (two ext3 partitions? one for swap disk?).How can I do that? Is that complicated with GParted?
View 1 Replies
View Related
Dec 3, 2009
I have just installed Windows 7 on a new hard drive.
If i click on My Computer i see a C drive (Windows 7) with just the one partition as i expected.
But if i right click on My Computer and go to manage then go to disk managment is see that the hard drive with Windows 7 on has two partitions one called System Reserved and is 100Mb and then the C Drive with Windows 7 on.
View 3 Replies
View Related
Dec 5, 2009
When i installed is version of win7 ie,Tiny7 Rev01 By experience. After that i tried to rename the drives(partitions) in 'My Computer' the first one ie,C: got renamed but the others r not. When i right clicking the a drive suppose D: & click to rename the edit cursor comes but after clicking OK it stays as 'LOCAL DISK D', but earlier when i installed this same version there was no such problem.
Anyone has any fix? If yes then plzzzz help me guys. Waiting for your response desperatly..
EDIT: One info i forgot to write here ie,I have A dual boot..i have XP installed in a other partition ie,C:..When i rename any partition while logged in win7 it not get renamed as i said but after that if i restart & log in XP then that specific partition which i renamed i win7 shows in XP..Eg:Suppose i renamed the C: as Master in Win7...it stays as local disk as in the sc above...but after that when log in Xp the C: shows as Master...&& in Xp everything is normal..
View 8 Replies
View Related
