I'm preparing to upgrade to 7 Pro. My current system has drive C: with XP...and Drive D: with Win 2000. I want to wipe D: and copy/clone my existing XP Pro on C: to D:...and then install fresh 7 Pro upgrade on C:
Question is what's the best way to clone/copy my good XP installation on drive C: to D: and maintain a bootable XP Pro on the newly transferred to drive D: ?
For the time being I want to set up a dual boot between my new 7 installation on C: and my XP Pro bootable installation migrated/copied/cloned to drive D:
Reason of course is my current C: drive is a much larger/faster drive than my current D: so I'd rather have Windows 7 Pro on the current C: drive with XP Pro running now
What's the best way to copy/clone XP on C: to a bootable XP on drive D: ?
I have been lurking around and posting several threads over the last few weeks regarding how to clone and copy over my windows partitions onto a SSD drive.I feel a little overwhelmed with it all can I just confirm if I can do the following as well? The following is based on me thinking that it might be best to clone the Windows 7 partition first onto the whole drive and then shrink the resulting C partition to define additional partitions for the rest - owing to my dual boot set-up.
1. Align the SSD 2. Make a System Image and create Restore Disk of my C and D Drives. 3. Back-Up the files.Place the SSD into the compartment and power up. 4. Clean Install Windows 7 REM 5. Then apply the System Repair and Install the saved System Image which will identically place the C and D drives on the SSD 6. Then take out partition software and create an ext4 partition for linux (since I have and would like to continue with a dual boot).
I have an issue when trying to clone my main drive (a 64Gb SSD) whereby the clone fails shortly after starting with an Error code "Failed to prepare operations code: 10 'file system error is found' with extended code: 458,777 File record corrupt". I am using Acronis but get the same result using other cloning software. The clone partitions the destination disc and then produces the error code when looking/checking the file system. I have narrowed the issue down to the winsxs folder and in particular the files beginning amd64* & x86* by using acronis file back-up facility and attempting to back-up the winsxs file. I have copied the winsxs folder to another drive and can successfully back-up this folder in it's new location using acronis. I should add that checkdsk and SFC do not return any errors on the source files/folder and I have in the past cloned this drive successfully.
I recently got a new SSD drive that I was interested in turning into my "System Drive" where I just keep all my system files (and some applications that I want to run fast) so that my boot speed is faster.So this is what I did: Downloaded EASEUS Disk Copy Booted it from a USB Copied my System Reserve and System Partition onto my SSD Set my System Reserve on my SSD to Active using Diskpart Changed the boot order to run my SSD first at startup Once I completed all these steps I started up my computer and after my post I get a little white bar "_" that just stays there blinking forever.I have tried changing my SATA controller to AHCI with the same result. (It's on IDE, now)Did disk copy not copy some of the files I need to boot with my SSD? Or did I not copy all the correct partitions?
I was wondering if there was anyway to clone or backup a Mac Hard drive from a Windows 7 machine. My friend's Mac got destroyed but managed to save the harddrive and left it with me to back up while he went on vacation.
Unfortunately I've never touched a Mac before and I'm assuming it won't even read the drive if I plug it into my PC since it uses HFS+.
I have with me the following things
- A Windows 7 PC and a Hard Drive Dock - The 250GB HD from the broken Mac - A Blank 256GB SSD that he wants to use.
Is there any software on Windows that will let me clone/backup the drive or read from it
I have a hitachi 2tb 5400rpm drive, with my OS installed on a 500GB partition (100gb free). I just got a 1tb samsung spinpoint f3 which i want to use as my boot drive. I have tried 3 methods: 1. Downloaded clonezilla, and used tuxboot to create a bootable flashdrive with clonezilla. I used the i686 image of clonezilla. I made a partition on the samsung drive which is 10GB larger than the boot partition on the hitachi. 2. I used the windows utility to make a back-up image of my bootdrive. I then made a bootable copy of windows 7 live install on a flash drive. Booted off it and tried to restore from that system image. I got an error: The system image restore failed. Error: Error details: The parameter is incorrect.(0x80070057) 3. Same as method 2, but I used a CD instead. This time, i got this error: System image restore to new drive fails. 0x80042414
I have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
cloning a hard drive with operating system and all.
Details: I have a couple of tablet pc's (Motion LE1700). One is in perfect shape (1), the other (2) has a physical problem with the USB ports. I have installed and configured W7 on 1. I can't do the same on 2 because I can't connect to it. I would like to make a copy of the hard drive on 1, take the hard drive out, replace it with 2's HD, copy that back, and then replace both drives.
What program do I use to clone the drive, what steps should I take, what should I look out for? The drives are 64G SSD's and I have a 500G external USB HD for the transferring. I don't want to just reinstall everything because it's a PITA, I want to copy the good drive to the other one.
I am stack at certain process while trying to load a system image onto new hard drive using Windows 7 x64 image restore function from the windows 7 disk, I got my primary drive 500 gigs with windows 7 and all my files,I made a system image onto another clean internal hard drive size 160 gigs and I was successful, now I disconnected my 500 gigs primary hard drive, attached a new 250 gig hard drive and I proceeded to load the system image, I boot to windows 7 cd,I get the option to repair , click on restore from system image file , everything looks good computer finds the hard drive 160 gigs with the system image as source,I press next look for the target drive and I see it there 250 gigs drive thats freshly formatted ..., I select the target press next it all looks good and then I get the screen that there is no target hard drive... I made sure that this hard drive is not being excluded from format and new process... I am lost ... what am I doing wrong here, I reformatted those 2 drives twice I tried this operation about 8 times , I get the error message each time I am attempting to create this new system image..
what I am trying to do is sort of complicated but I'll try my best to explain it. Basically I'm trying to squeeze every ounce of potential out of my nearly outdated machine.
First, my relevant system specs:
- Windows 7 Pro 64bit
- 2 IDE Hard drives - 5400rpm 80GB Maxtor, and 7200rpm 160GB Seagate
- 2 Gigs of generic grade RAM
OK so earlier today I found out about virtual memory, AKA a paging file, and about how it acts like a sort of RAM buffer, increasing performance. I also found out that I can put a paging file on each hard drive and that I could get the greatest benefit if I had each hard drive on a separate IDE channel, so I ripped open my case, rerouted the cables appropriately, changed the master/slave jumpers, reset CMOS, and booted up Windows 7.
Now here is where I make things more complicated . In the interest of getting every drop of juice out of this rotten orange, I want to move (clone) the entire Windows 7 partition from the Maxtor to the Seagate to take advantage of the extra RPMs. Except when I attempt the cloning process via Seagate Disc Wizard, I only get the option to clone the Windows 7 partition and not the reserved unallocated space used by Windows Recovery Environment.
I am unaware of how Windows 7 uses the reserved space specifically, but I assume that if I just created the unallocated space later it wouldn't instantly restore WinRE functionality. I know enough to know it has to be more complicated than that. How would I clone the Windows 7 partition and retain WinRE functionality?
Then, after that's done, do I still have to allocate some space on each hard drive for the paging files, like a Linux swap file? Or is the virtual memory reserved literally as a file in the operating system partition?
I have a Sony C series 64 bit laptop. I have a 2.5" IDE drive from my old laptop which has XP.
I was thinking to image Win 7 on my Sony to a cd; so that I have a clean disk. How can I then clone my XP ide drive onto the new laptop drive - which is an Hitachi ATA (mSata?) - so that I will have a dual boot system? Although if the XP works fine, that is what I will use.
I do a sysprep 1st, then use Bart PE. However I believe Bart PE only goes to XP SP3, and I only have the whole drive - with all my docs on it. No installation disk.
Do I need to do a "sysprep"? Is it possible to "slipstream" a whole drive with all the necessary drivers? Will it be an issue if the XP is 32 bit, and my new machine is 64bit?
I can boot up ok. But the boot drive makes clicking sound sometimes and makes the computer slower, especially when waking up from a sleepI tried using Acronis to clone the drive. It crashed as soon as the drive makes the first clicking sound and nothing is cloned.ince I can boot from the drive, if I use windows explorer to copy all the good files including the hidden files to a new drive, is there a way to then "sys" the new drive like in windows XP to make it bootable into windows 7
I used clonezilla to copy the data on my laptop drive to an external 640gb drive I had. The cloning process went fine but when I went to boot on the 640gb drive I (expectantly) got a blue screen error. Now, the way to fix this would be to boot into safe mode and delete the drivers but for some reason every time I boot and press the f8 button it brings me into the Windows Error Recovery mode menu which has no options for safe mode and doesn't help at all.
Is it safe to burn a Windows 7 installation ISO image using the 'exact copy' option, meaning making an exact duplicate from an already existing CD. Or is it safer to burn a CD from the original ISO file? Wouldn't the 'exact copy' option have higher chances for data corruption, especially since it is a boot/installation CD?
I have a brand new install of Win 7, after which I tried to install a LINKSYS Wireless USB Adapter (WUSB300N) and during the copy files installation process I get ACCESS IS DENIED.and the process stops. I only have one id defined and it of course has admin authority, so I don't know what is wrong.
i have a (spinning) hard-drive with my windows 7system and data on it. it is up to date to this month. the hard-drive is a 320gb. there is jsut 69gb used on the 320gb.i just bought a 256 gb SSD (solid state HD). i would like to place everything on the 256 and put IT in my laptop. i have saved a system image of the 320gb on DVD. windows seems to want an exact size (320gb) to restore the system to.
This is very frustrating now...Yes, I know it´s because of my lack of knowledge about Windows 7 and security/permission rules and settings. But still.
Hopefully someone is kind enough to help me out a bit here and maybe I´ll understand better (hopefully)
I´ve just installed Windows 7 and this is what I want to do:
Copy my old Favorites-folder (Win Explorer 8) from the old harddrive to my new folder in Win 7.
I had some problems accessing my old folder in My Documents on the old harddrive but i changed permission and ownership and finally I could access it and copy the folder. But. It seems impossible to copy it into c:UsersxxxxxFavorites
It just says "You´ll need to provide administrator permission to copy this folder"
I´ve disabled the built in admin account and tried every fix I´ve found but I still receive the same message. How can I fix this??? Seems like a simple thing to do but i just cant get it to work.
My PC was somehow configured so that I cannot copy files from the internal hard drive to a USB pen drive (e.g., to make a back-up).
When I try to do this, I get the following message: "Destination Folder Access Denied You need permission to perform this action."
There is definitely enough room on the USB drive. The USB drive is configured with a password, which I entered correctly after plugging in the drive. After doing this, I am able to see the files from the drive. The configuration is such that I can copy files from the USB drive to the PC's hard drive, but I can't copy in the other direction, which is what I need to do.
This sounds like a Windows permissions issue to me. I have taken ownership of the file in question, and I have assigned full control to that file.
I'm trying to back-up our office DVR system that came with some very expensive software (and the warranty on it has already expired.)So I bought identical hard drives (to the ones installed -- 3 total) so now I need to make one-to-one copies from the originals. My idea was to hook each drive pair (original and backup drives) to my other Windows 7 desktop and do the copy, but what software shall I use?
i am running windows seven and i am asking how i can copy a partition from one drive to another. i got an old drive with one partition and a new one. The new one has windows seven on it and the old one has a old windows on it. i wanna have have both partitions so i can go to data of my old one and use the new one (everything on the new hard drive)
We are trying to copy/paste files from a CD to a folder on the C drive. But the user is unable to complete this task after hours on the phone. I'm frustrated. It's an easy task, but we can't get it.the user inserts the CD.The user can browse to the CD and find the files, but there is no Edit menu, no way to Copy the files to the C drive.how to copy files from a CD to the C drive.
A friend burned a home video to dvd and has let me borrow it. She has no objections to me copying the dvd to either my HD or to another dvd disc. How to do this and if I require additional software to complete this task.
I am making a new computer for my little brother and i'm wondering if can just copy my existing hard drive to a new one for his computer so that i dont have to buy windows 7 again. Will i need a new product key or after copying it will it work fine with no product key?
I recently installed windows 7 on my Seagate hdd while the Samsung hdd was connected.Unfortunately,my samsung hdd is starting to die so I have to remove it for RMA. But when I remove it,my pc shows ntldr not found.While when I reconnects the Samsung hdd,it boots normal. Does it means that the Samsung hdd contains the bootloader files.If so,How can i transfer them to my seagate hdd(the one which has the OS) to allow the pc to boot without the Samsung hdd(faulty one)..
I cant copy anything to my Kingston 16 GB. in addition, in the properties window, there isn't any 'Security' tab at all. what can i do ?I also tried to manage it through the MMC. but it doesn't open and the console crashes, asking for manual debugger attachment.
When i am trying to copy any file from the lap top to pen drive, it is not copying. it is giving a message that administrator permission i am not understanding how to copy files to pendrive
Can somebody please advise how to only copy data changes to a 2nd mirror drive (identical) is there any software free or buy that will do this job quickly as I have been doing it manually.I have 2 drive identical and I work on one for some time then I clone it to the 2nd drive but all I really want to do is copy the data/work only and not system files.
im looking to get new harddrive and was wondering isit possible to copy whole os to new hdd?
meaning like copy whole os to new hdd so i dont have to reinstall all my programs because im going to use my current hdd as external storage using caddy and my new hdd as my sole drive
ive been told theres some program called ghost something that does it,,is this true or even possible
