I have a hitachi 2tb 5400rpm drive, with my OS installed on a 500GB partition (100gb free). I just got a 1tb samsung spinpoint f3 which i want to use as my boot drive. I have tried 3 methods: 1. Downloaded clonezilla, and used tuxboot to create a bootable flashdrive with clonezilla. I used the i686 image of clonezilla. I made a partition on the samsung drive which is 10GB larger than the boot partition on the hitachi. 2. I used the windows utility to make a back-up image of my bootdrive. I then made a bootable copy of windows 7 live install on a flash drive. Booted off it and tried to restore from that system image. I got an error: The system image restore failed. Error: Error details: The parameter is incorrect.(0x80070057) 3. Same as method 2, but I used a CD instead. This time, i got this error: System image restore to new drive fails. 0x80042414
I have a Sony C series 64 bit laptop. I have a 2.5" IDE drive from my old laptop which has XP.
I was thinking to image Win 7 on my Sony to a cd; so that I have a clean disk. How can I then clone my XP ide drive onto the new laptop drive - which is an Hitachi ATA (mSata?) - so that I will have a dual boot system? Although if the XP works fine, that is what I will use.
I do a sysprep 1st, then use Bart PE. However I believe Bart PE only goes to XP SP3, and I only have the whole drive - with all my docs on it. No installation disk.
Do I need to do a "sysprep"? Is it possible to "slipstream" a whole drive with all the necessary drivers? Will it be an issue if the XP is 32 bit, and my new machine is 64bit?
I can boot up ok. But the boot drive makes clicking sound sometimes and makes the computer slower, especially when waking up from a sleepI tried using Acronis to clone the drive. It crashed as soon as the drive makes the first clicking sound and nothing is cloned.ince I can boot from the drive, if I use windows explorer to copy all the good files including the hidden files to a new drive, is there a way to then "sys" the new drive like in windows XP to make it bootable into windows 7
I was wondering if there was anyway to clone or backup a Mac Hard drive from a Windows 7 machine. My friend's Mac got destroyed but managed to save the harddrive and left it with me to back up while he went on vacation.
Unfortunately I've never touched a Mac before and I'm assuming it won't even read the drive if I plug it into my PC since it uses HFS+.
I have with me the following things
- A Windows 7 PC and a Hard Drive Dock - The 250GB HD from the broken Mac - A Blank 256GB SSD that he wants to use.
Is there any software on Windows that will let me clone/backup the drive or read from it
cloning a hard drive with operating system and all.
Details: I have a couple of tablet pc's (Motion LE1700). One is in perfect shape (1), the other (2) has a physical problem with the USB ports. I have installed and configured W7 on 1. I can't do the same on 2 because I can't connect to it. I would like to make a copy of the hard drive on 1, take the hard drive out, replace it with 2's HD, copy that back, and then replace both drives.
What program do I use to clone the drive, what steps should I take, what should I look out for? The drives are 64G SSD's and I have a 500G external USB HD for the transferring. I don't want to just reinstall everything because it's a PITA, I want to copy the good drive to the other one.
I have been lurking around and posting several threads over the last few weeks regarding how to clone and copy over my windows partitions onto a SSD drive.I feel a little overwhelmed with it all can I just confirm if I can do the following as well? The following is based on me thinking that it might be best to clone the Windows 7 partition first onto the whole drive and then shrink the resulting C partition to define additional partitions for the rest - owing to my dual boot set-up.
1. Align the SSD 2. Make a System Image and create Restore Disk of my C and D Drives. 3. Back-Up the files.Place the SSD into the compartment and power up. 4. Clean Install Windows 7 REM 5. Then apply the System Repair and Install the saved System Image which will identically place the C and D drives on the SSD 6. Then take out partition software and create an ext4 partition for linux (since I have and would like to continue with a dual boot).
Referring to this post [URL]. Just to make sure I'm understanding this correctly, Paragon should work on your computer when this issue is going on? I installed a new Samsung 830 SSD in my ASUS G74SX last night using Norton Ghost and while the clone worked as far as I can tell. I get the same blue screen and when I manually start explorer the drive letter for the SSD is E: rather than C: I think fixing that would remedy the issue but it won't let me change the drive path with the OS in use.
I have an issue when trying to clone my main drive (a 64Gb SSD) whereby the clone fails shortly after starting with an Error code "Failed to prepare operations code: 10 'file system error is found' with extended code: 458,777 File record corrupt". I am using Acronis but get the same result using other cloning software. The clone partitions the destination disc and then produces the error code when looking/checking the file system. I have narrowed the issue down to the winsxs folder and in particular the files beginning amd64* & x86* by using acronis file back-up facility and attempting to back-up the winsxs file. I have copied the winsxs folder to another drive and can successfully back-up this folder in it's new location using acronis. I should add that checkdsk and SFC do not return any errors on the source files/folder and I have in the past cloned this drive successfully.
I recently got a new SSD drive that I was interested in turning into my "System Drive" where I just keep all my system files (and some applications that I want to run fast) so that my boot speed is faster.So this is what I did: Downloaded EASEUS Disk Copy Booted it from a USB Copied my System Reserve and System Partition onto my SSD Set my System Reserve on my SSD to Active using Diskpart Changed the boot order to run my SSD first at startup Once I completed all these steps I started up my computer and after my post I get a little white bar "_" that just stays there blinking forever.I have tried changing my SATA controller to AHCI with the same result. (It's on IDE, now)Did disk copy not copy some of the files I need to boot with my SSD? Or did I not copy all the correct partitions?
I'm preparing to upgrade to 7 Pro. My current system has drive C: with XP...and Drive D: with Win 2000. I want to wipe D: and copy/clone my existing XP Pro on C: to D:...and then install fresh 7 Pro upgrade on C:
Question is what's the best way to clone/copy my good XP installation on drive C: to D: and maintain a bootable XP Pro on the newly transferred to drive D: ?
For the time being I want to set up a dual boot between my new 7 installation on C: and my XP Pro bootable installation migrated/copied/cloned to drive D:
Reason of course is my current C: drive is a much larger/faster drive than my current D: so I'd rather have Windows 7 Pro on the current C: drive with XP Pro running now
What's the best way to copy/clone XP on C: to a bootable XP on drive D: ?
I had a perfectly working 250GB SATA HDD that I tried to clone to a 1 TB SATA HDD. I used EASEUS's free disk copy software. The clone said it would tas the one being cloned and not written to. The cloned drive had the data on it, but it was just corrupted because the clone never finished. I tried to get into recovery console from the Windows 7 CD, and it kept sayike about an hour and 20 minutes, and I read that it would be quicker, as all the free space would not need to clone over sector by sector. I aborted so that I could use different software that would quick clone. Anyway, afterwards, neither HDD would boot. The source drive should boot, as all it wang it was the wrong version. Basically the program screwed up both my hard drives.
Finally, I was able to get into a UEFI recovery console that allowed me to see that the cloning program somehow changed my partitions into GPT. The source hard drive is all intact, and I'm pretty sure the only thing that is screwed up is the partition types and perhaps the boot record. Is there a way I can edit the partitions to make them back to normal and bootable again?
I have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
I am stack at certain process while trying to load a system image onto new hard drive using Windows 7 x64 image restore function from the windows 7 disk, I got my primary drive 500 gigs with windows 7 and all my files,I made a system image onto another clean internal hard drive size 160 gigs and I was successful, now I disconnected my 500 gigs primary hard drive, attached a new 250 gig hard drive and I proceeded to load the system image, I boot to windows 7 cd,I get the option to repair , click on restore from system image file , everything looks good computer finds the hard drive 160 gigs with the system image as source,I press next look for the target drive and I see it there 250 gigs drive thats freshly formatted ..., I select the target press next it all looks good and then I get the screen that there is no target hard drive... I made sure that this hard drive is not being excluded from format and new process... I am lost ... what am I doing wrong here, I reformatted those 2 drives twice I tried this operation about 8 times , I get the error message each time I am attempting to create this new system image..
what I am trying to do is sort of complicated but I'll try my best to explain it. Basically I'm trying to squeeze every ounce of potential out of my nearly outdated machine.
First, my relevant system specs:
- Windows 7 Pro 64bit
- 2 IDE Hard drives - 5400rpm 80GB Maxtor, and 7200rpm 160GB Seagate
- 2 Gigs of generic grade RAM
OK so earlier today I found out about virtual memory, AKA a paging file, and about how it acts like a sort of RAM buffer, increasing performance. I also found out that I can put a paging file on each hard drive and that I could get the greatest benefit if I had each hard drive on a separate IDE channel, so I ripped open my case, rerouted the cables appropriately, changed the master/slave jumpers, reset CMOS, and booted up Windows 7.
Now here is where I make things more complicated . In the interest of getting every drop of juice out of this rotten orange, I want to move (clone) the entire Windows 7 partition from the Maxtor to the Seagate to take advantage of the extra RPMs. Except when I attempt the cloning process via Seagate Disc Wizard, I only get the option to clone the Windows 7 partition and not the reserved unallocated space used by Windows Recovery Environment.
I am unaware of how Windows 7 uses the reserved space specifically, but I assume that if I just created the unallocated space later it wouldn't instantly restore WinRE functionality. I know enough to know it has to be more complicated than that. How would I clone the Windows 7 partition and retain WinRE functionality?
Then, after that's done, do I still have to allocate some space on each hard drive for the paging files, like a Linux swap file? Or is the virtual memory reserved literally as a file in the operating system partition?
I used clonezilla to copy the data on my laptop drive to an external 640gb drive I had. The cloning process went fine but when I went to boot on the 640gb drive I (expectantly) got a blue screen error. Now, the way to fix this would be to boot into safe mode and delete the drivers but for some reason every time I boot and press the f8 button it brings me into the Windows Error Recovery mode menu which has no options for safe mode and doesn't help at all.
i'm using windows 7 pc with 2 partition on 160 gb HDD seagate.i want to backup the HDD so, i make a clone of whole HDD with Norton Ghost vis DOS. The operation successful, all files and folders are ok but windows can't boot from cloned drive<also 160 gb segate>. (i've successfully done several times with win XP)it say, hardware and software changed and need to repair with windows dvd.i did repair, windows boot but next time, it happen again requiring the windows dvd.so what software should i use to overcome this, either free or paid software will be ok? "how can i make self bootable clones?"
Just wanted to know about cloning a Windows 7 machine. What I have to do is I have a system with OEM Windows 7 Pro installed with SQL Express edition and visual studio installed, now I want to make a clone of this machine so when a new machine comes.
Is it possible to make a clone / image of a laptop setup with all the work settings etc and run that on a mac instead of osx?I can't just install windows as all the work settings would be lost and the 'IT' department won't support macs. I know it is possible, can anyone point me in the direction of it?
Tech Support Guy System Info Utility version 1.0.0.2 OS Version: Microsoft Windows 7 Ultimate, Service Pack 1, 64 bit Processor: AMD Athlon(tm) II X4 620 Processor, AMD64 Family 16 Model 5 Stepping 2 Processor Count: 4 RAM: 16126 Mb Graphics Card: ATI Radeon HD 4200, 368 Mb Hard Drives: C: Total - 953866 MB, Free - 854043 MB; D: Total - 953765 MB, Free - 953619 MB; Motherboard: ASUSTeK Computer INC., M4A785TD-M EVO Antivirus: Trend Micro Client/Server Security Agent Antivirus, Updated and Enabled
My machine is making a weird sound and I want to be prepared for the worst before I let a technician touch it.I'm running Windows 7 on my PC and am backing up files to a Microsoft Home Server but want a complete "copy" of my PC system (programs, files, settings, etc.).My head is starting to spin with everthing I've read and heard about cloning and imaging not to mention all the software choices (cloud or external hard drive) and if external hard drive is the way to go, which one.
I cloned my old laptop hard drive to preserve my documents, movies, applications, etc and I now want to decompress the clone onto my new PC hard drive. HOWEVER my new PC already has Windows 7 installed on a second hard drive in the computer, and my laptop clone was cloned with Windows 7 (it was all on 1 hard drive partition). When I decompress the cloned image will I run into any problems with Windows folders on 2 drives, or can I delete the second windows folder?
I am pulling my hair out here as i just can not restore a windows 7 pro image backup to a 128gb SSD. I have a Samsung f1 1tb drive which has a 48.7gb partition and a 882gig partition. The windows boot drive c is the 48.7gb Partition and the larger one is for storage. I have used windows 7 pro image clone and make an image of the C: partition of the drive which is 45gb full and have stored it on a usb drive. Now i have formatted the SSD drive as i have got windows 7 pro on there but there's far far to much work for me to get it back to the way it is on my Samsung drive.
I followed this guide (URL) now where it says In the next screen just click on Next...there are no other partitions in this instance so we don't need to worry about excluding disks. in the exclude menu i checked to see if the ssd was in there which it was and was unticked. The restore process will begin. It might take a few hours to restore everything depending on the size of the image and how much data there is. Provided there are no errors and the process completes successfully, your system will restart and the system should be restored. it says can not find a drive to put the image restore on ? I have tried disk part and it shows that there are 2 hard drives there one ssd on a sata and the other on a usb with the image on there. I can not for the life of me get it to put the image clone on the ssd drive. am i doing something wrong can anyone help. I have even tried to format the ssd and it still will not work
My current hard drive is dying, so claims Windows and Hitachi Drive Fitness Test. I bought a replacement drive 3TB drive which requires GPT partitioning. I have 64 bit windows and a UEFI motherboard, so I know I can use the drive as a boot drive for a brand new installation.
My question is how do I move the entire contents of my old drive to this new drive and keep it bootable?
I asked on other another site and they suggested I first let the Windows installation disk partition the drive GPT correctly for Windows, then copy the contents of the old drive to the new one. However, another person on that site said that that would break all the symlinks (didn't know symlinks played such a crucial role in the OS) and that I should use a cloning utility that knows how to copy NTFS. Was this person off base, or is it impossible to create a bootable copy of a Windows installation by just copying all the files (this would be from live linux of some type, not Windows itself)? If it is impossible, is there a utility that can copy the contents of a partition correctly, without needing to clone the entire partition table? Also, I have no room to make an image of my old drive anywhere.
Finally, does anyone know if clonezilla can copy an mbr partition to a gpt partition automatically, essentially doing exactly what I need, or will it always copy the partition scheme as well?
2 months ago, I installed windows 7 pro with no problems at all. Fast forward to today, I decided to reformat because the boot would get stuck in the middle of trying to boot into windows, it wouldn't flash the windows logo. I didn't think much of it so I just reformatted. This is where my real troubles began.So I reinstall windows 7 pro with no problems (the boot disk is in there the cd drive the entire time) I install my programs and what not and install my updates. All 100% Fine. Then I take out the boot disk and restart again... and I get this error message saying:
Client Mac Address: 00 30 1B BC1F59 GUID: 12973077-FFFF-FFFF-FFFF-FFFFFFFFFFFF DCHP....
Then I press escape, then it says this:
PXE-EA0: Network Boot Canceled PXE-M0F: Exiting Nvidia Boot Agent DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER
So the first time I got this error, I just thought, Oh, something must have happened no big deal, so I reformatted again and again. But I kept on getting the same exact error. It'll load into windows just fine when my install disc is in the cd drive, but when I take it out, that error pops up. *My windows is authentic, each time I have been able to validate my copy.* I have tried installing from my hard drive and from the install disc with same error.*
I built some computers for the local Verizon stores a while back and the guys have pretty much destroyed them. I would like to set up one system and clone the drive so that all four systems are identical. Each system is completely identical to the next as far as hardware goes. Can anyone suggest a high quality program to duplicate the first drive that is simple and quick? Time is very important as the systems cannot be down for to long.
Because my current SSD has been giving me way too many problems mainly with BSODing randomly, and after reading that lots of people have similar reliability problems with the same model, I want to get a new SSD soon. However, I want to save time and just be able to clone exactly what I have onto the new drive.
I've heard that cloning from a HDD to SSD will cause problems. However I am talking about SSD to SSD.
The drive I plan on buying will still use a Sandforce controller, and will be the same capacity. Specifically my current one is the Mushkin Chronos Deluxe 240gb and I want to get the Kingston 3K HyperX 240gb.
The Kingston SSD I plan on getting should come with software that lets me clone, which I think is the Acronis one. What do I need to do to successfully and seamlessly transition my entire system onto the new SSD?
I got a laptop with tons of data and application, so I have got a bigger hard drive, i don�t really want to copy the data over nor reinstall the apps on the new HDD. Therefore can anyone suggest a way to clone the HDD and deploy on to the larger HDD and hopefully pop it in the laptop and off i go..
Now, this laptop is on a company domain so I don�t think any cloning tool will put it back on the domain so how does cloning work with domain laptops?
I just got a new SSD and installed it, it shows in BIOS, assigned a paritation letter (E) to it, tried to clone it with Macrium and Easeus but they Macrium displays an error after a while and Easeus just stucks after a while.