How To Clone Boot Drive With Read Errors
Jun 1, 2012
I can boot up ok. But the boot drive makes clicking sound sometimes and makes the computer slower, especially when waking up from a sleepI tried using Acronis to clone the drive. It crashed as soon as the drive makes the first clicking sound and nothing is cloned.ince I can boot from the drive, if I use windows explorer to copy all the good files including the hidden files to a new drive, is there a way to then "sys" the new drive like in windows XP to make it bootable into windows 7
View 3 Replies
ADVERTISEMENT
Aug 9, 2011
I have a hitachi 2tb 5400rpm drive, with my OS installed on a 500GB partition (100gb free). I just got a 1tb samsung spinpoint f3 which i want to use as my boot drive. I have tried 3 methods: 1. Downloaded clonezilla, and used tuxboot to create a bootable flashdrive with clonezilla. I used the i686 image of clonezilla. I made a partition on the samsung drive which is 10GB larger than the boot partition on the hitachi. 2. I used the windows utility to make a back-up image of my bootdrive. I then made a bootable copy of windows 7 live install on a flash drive. Booted off it and tried to restore from that system image. I got an error: The system image restore failed. Error: Error details: The parameter is incorrect.(0x80070057) 3. Same as method 2, but I used a CD instead. This time, i got this error: System image restore to new drive fails. 0x80042414
View 3 Replies
View Related
Mar 7, 2012
I have a Sony C series 64 bit laptop. I have a 2.5" IDE drive from my old laptop which has XP.
I was thinking to image Win 7 on my Sony to a cd; so that I have a clean disk. How can I then clone my XP ide drive onto the new laptop drive - which is an Hitachi ATA (mSata?) - so that I will have a dual boot system? Although if the XP works fine, that is what I will use.
I do a sysprep 1st, then use Bart PE. However I believe Bart PE only goes to XP SP3, and I only have the whole drive - with all my docs on it. No installation disk.
Do I need to do a "sysprep"? Is it possible to "slipstream" a whole drive with all the necessary drivers? Will it be an issue if the XP is 32 bit, and my new machine is 64bit?
View 6 Replies
View Related
Nov 23, 2009
The last couple of times I've booted up Windows 7, prior to launching the OS, It has felt the need to perform some sort of drive error checking task, and as far as I know, I haven't scheduled any 'checking for errors' type-tasks for my hard drive.
What's going on?
View 7 Replies
View Related
May 24, 2012
i mounted my windows 7 iso with daemon, opened my cmd/disk part window and cleaned, partitioned, formated, and assigned the drive letter and then xcopied my mount to the flash drive, but it wont show up during boot up. i've done this a million times and its worked with this computer. im using the poopy mobo out of the a6430f hp computer. its an asus mobo.
View 7 Replies
View Related
Aug 21, 2012
Errors found. CHKDSK cannot continue in read-only mode. I ran hard disk check... the result is given below........Errors found. CHKDSK cannot continue in read-only mode.
Windows XP
English (United States)
C: Volume Label: JAYDEEP, File System: NTFS
Volume label is JAYDEEP.
Advanced SystemCare is verifying files (stage 1 of 3)...
144896 file records processed.
File verification completed.
[code]....
View 2 Replies
View Related
Oct 23, 2012
The clone disk won't boot after clone using Ghost version 11.Tthe source disk is 146GB SSD and the clone disk is 256GB SSD
View 10 Replies
View Related
Dec 16, 2011
Referring to this post [URL]. Just to make sure I'm understanding this correctly, Paragon should work on your computer when this issue is going on? I installed a new Samsung 830 SSD in my ASUS G74SX last night using Norton Ghost and while the clone worked as far as I can tell. I get the same blue screen and when I manually start explorer the drive letter for the SSD is E: rather than C: I think fixing that would remedy the issue but it won't let me change the drive path with the OS in use.
View 1 Replies
View Related
Jan 28, 2013
I have an issue when trying to clone my main drive (a 64Gb SSD) whereby the clone fails shortly after starting with an Error code "Failed to prepare operations code: 10 'file system error is found' with extended code: 458,777 File record corrupt". I am using Acronis but get the same result using other cloning software. The clone partitions the destination disc and then produces the error code when looking/checking the file system. I have narrowed the issue down to the winsxs folder and in particular the files beginning amd64* & x86* by using acronis file back-up facility and attempting to back-up the winsxs file. I have copied the winsxs folder to another drive and can successfully back-up this folder in it's new location using acronis. I should add that checkdsk and SFC do not return any errors on the source files/folder and I have in the past cloned this drive successfully.
View 2 Replies
View Related
Sep 17, 2012
change it to read and write mode, and also to remove write procted in it.
View 1 Replies
View Related
Apr 7, 2012
I recently got a new SSD drive that I was interested in turning into my "System Drive" where I just keep all my system files (and some applications that I want to run fast) so that my boot speed is faster.So this is what I did: Downloaded EASEUS Disk Copy Booted it from a USB Copied my System Reserve and System Partition onto my SSD Set my System Reserve on my SSD to Active using Diskpart Changed the boot order to run my SSD first at startup Once I completed all these steps I started up my computer and after my post I get a little white bar "_" that just stays there blinking forever.I have tried changing my SATA controller to AHCI with the same result. (It's on IDE, now)Did disk copy not copy some of the files I need to boot with my SSD? Or did I not copy all the correct partitions?
View 9 Replies
View Related
Dec 7, 2012
I have a spanned volume setup with 4 drives. One of the drives is starting to throw read errors which is preventing WHS from backing it up (Yikes!).
Is it possible to clone the drive with the errors and to reinsert a new drive into the array?
Can the new drive be bigger?
View 3 Replies
View Related
Dec 31, 2009
I'm preparing to upgrade to 7 Pro. My current system has drive C: with XP...and Drive D: with Win 2000. I want to wipe D: and copy/clone my existing XP Pro on C: to D:...and then install fresh 7 Pro upgrade on C:
Question is what's the best way to clone/copy my good XP installation on drive C: to D: and maintain a bootable XP Pro on the newly transferred to drive D: ?
For the time being I want to set up a dual boot between my new 7 installation on C: and my XP Pro bootable installation migrated/copied/cloned to drive D:
Reason of course is my current C: drive is a much larger/faster drive than my current D: so I'd rather have Windows 7 Pro on the current C: drive with XP Pro running now
What's the best way to copy/clone XP on C: to a bootable XP on drive D: ?
View 1 Replies
View Related
May 14, 2011
I was wondering if there was anyway to clone or backup a Mac Hard drive from a Windows 7 machine. My friend's Mac got destroyed but managed to save the harddrive and left it with me to back up while he went on vacation.
Unfortunately I've never touched a Mac before and I'm assuming it won't even read the drive if I plug it into my PC since it uses HFS+.
I have with me the following things
- A Windows 7 PC and a Hard Drive Dock
- The 250GB HD from the broken Mac
- A Blank 256GB SSD that he wants to use.
Is there any software on Windows that will let me clone/backup the drive or read from it
View 6 Replies
View Related
Nov 15, 2012
I had a perfectly working 250GB SATA HDD that I tried to clone to a 1 TB SATA HDD. I used EASEUS's free disk copy software. The clone said it would tas the one being cloned and not written to. The cloned drive had the data on it, but it was just corrupted because the clone never finished. I tried to get into recovery console from the Windows 7 CD, and it kept sayike about an hour and 20 minutes, and I read that it would be quicker, as all the free space would not need to clone over sector by sector. I aborted so that I could use different software that would quick clone. Anyway, afterwards, neither HDD would boot. The source drive should boot, as all it wang it was the wrong version. Basically the program screwed up both my hard drives.
Finally, I was able to get into a UEFI recovery console that allowed me to see that the cloning program somehow changed my partitions into GPT. The source hard drive is all intact, and I'm pretty sure the only thing that is screwed up is the partition types and perhaps the boot record. Is there a way I can edit the partitions to make them back to normal and bootable again?
View 1 Replies
View Related
Nov 14, 2012
I have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
View 3 Replies
View Related
Sep 26, 2011
cloning a hard drive with operating system and all.
Details: I have a couple of tablet pc's (Motion LE1700). One is in perfect shape (1), the other (2) has a physical problem with the USB ports. I have installed and configured W7 on 1. I can't do the same on 2 because I can't connect to it. I would like to make a copy of the hard drive on 1, take the hard drive out, replace it with 2's HD, copy that back, and then replace both drives.
What program do I use to clone the drive, what steps should I take, what should I look out for? The drives are 64G SSD's and I have a 500G external USB HD for the transferring. I don't want to just reinstall everything because it's a PITA, I want to copy the good drive to the other one.
View 3 Replies
View Related
Apr 12, 2012
I am stack at certain process while trying to load a system image onto new hard drive using Windows 7 x64 image restore function from the windows 7 disk, I got my primary drive 500 gigs with windows 7 and all my files,I made a system image onto another clean internal hard drive size 160 gigs and I was successful, now I disconnected my 500 gigs primary hard drive, attached a new 250 gig hard drive and I proceeded to load the system image, I boot to windows 7 cd,I get the option to repair , click on restore from system image file , everything looks good computer finds the hard drive 160 gigs with the system image as source,I press next look for the target drive and I see it there 250 gigs drive thats freshly formatted ..., I select the target press next it all looks good and then I get the screen that there is no target hard drive... I made sure that this hard drive is not being excluded from format and new process... I am lost ... what am I doing wrong here, I reformatted those 2 drives twice I tried this operation about 8 times , I get the error message each time I am attempting to create this new system image..
View 9 Replies
View Related
Nov 5, 2009
what I am trying to do is sort of complicated but I'll try my best to explain it. Basically I'm trying to squeeze every ounce of potential out of my nearly outdated machine.
First, my relevant system specs:
- Windows 7 Pro 64bit
- 2 IDE Hard drives - 5400rpm 80GB Maxtor, and 7200rpm 160GB Seagate
- 2 Gigs of generic grade RAM
OK so earlier today I found out about virtual memory, AKA a paging file, and about how it acts like a sort of RAM buffer, increasing performance. I also found out that I can put a paging file on each hard drive and that I could get the greatest benefit if I had each hard drive on a separate IDE channel, so I ripped open my case, rerouted the cables appropriately, changed the master/slave jumpers, reset CMOS, and booted up Windows 7.
Now here is where I make things more complicated . In the interest of getting every drop of juice out of this rotten orange, I want to move (clone) the entire Windows 7 partition from the Maxtor to the Seagate to take advantage of the extra RPMs. Except when I attempt the cloning process via Seagate Disc Wizard, I only get the option to clone the Windows 7 partition and not the reserved unallocated space used by Windows Recovery Environment.
I am unaware of how Windows 7 uses the reserved space specifically, but I assume that if I just created the unallocated space later it wouldn't instantly restore WinRE functionality. I know enough to know it has to be more complicated than that. How would I clone the Windows 7 partition and retain WinRE functionality?
Then, after that's done, do I still have to allocate some space on each hard drive for the paging files, like a Linux swap file? Or is the virtual memory reserved literally as a file in the operating system partition?
View 4 Replies
View Related
Nov 22, 2010
I have been lurking around and posting several threads over the last few weeks regarding how to clone and copy over my windows partitions onto a SSD drive.I feel a little overwhelmed with it all can I just confirm if I can do the following as well? The following is based on me thinking that it might be best to clone the Windows 7 partition first onto the whole drive and then shrink the resulting C partition to define additional partitions for the rest - owing to my dual boot set-up.
1. Align the SSD
2. Make a System Image and create Restore Disk of my C and D Drives.
3. Back-Up the files.Place the SSD into the compartment and power up.
4. Clean Install Windows 7 REM
5. Then apply the System Repair and Install the saved System Image which will identically place the C and D drives on the SSD
6. Then take out partition software and create an ext4 partition for linux (since I have and would like to continue with a dual boot).
View 3 Replies
View Related
May 16, 2011
I used clonezilla to copy the data on my laptop drive to an external 640gb drive I had. The cloning process went fine but when I went to boot on the 640gb drive I (expectantly) got a blue screen error. Now, the way to fix this would be to boot into safe mode and delete the drivers but for some reason every time I boot and press the f8 button it brings me into the Windows Error Recovery mode menu which has no options for safe mode and doesn't help at all.
View 8 Replies
View Related
Dec 13, 2012
]I have been experiencing a real problem with my computer. It started to Boot slower and slower about 2 months ago.First, the computer: A VM Win 7 w/ 1 CPU @ 2.4 GHz & 2 GB of 1067 MHz DDR3 RAM.
View 6 Replies
View Related
Jan 26, 2013
Lately I've been receiving "No Disk" errors when I start up my computer. It appears to be "NoBuClient.exe" and "CCC.exe" that result in the "There is no disk in the drive. Please insert a disk into drivedeviceharddisk6dr6" error during startup. "Dropbox.exe" and "Acrobat.exe" have also been noted to give the same "There is no disk in the drive. Please insert a disk into drivedeviceharddisk6dr6" upon launch as well.Is there any way to stop the errors from happening?
View 3 Replies
View Related
Mar 24, 2011
I'm deaf, and had a stroke, (Right side Handicap)type MSCONFIG: Did Startup, If the "Startup Item" column isn't wide enough to see the entire name of any of them, widen the column.Can't read the Startup Item, Can't read the Notepad. But have about 12 Startup Items.How Do I Read boot? I have a long time waiting for the Boot. About 1 mimute to from turn on Clock and Calender[CODE]
View 2 Replies
View Related
Aug 4, 2011
the pc was completly working on windows xp but its was having a few errors with its graphics and slow internet ,and slow boot thinking its because its not been cleaned for 5 years and a lack of virus protection i decided to format it and give it a fresh install of windows 7. Is it oka ?
View 2 Replies
View Related
Aug 26, 2012
My system had been very slow and hanging for a while now, so i decided to to check for errors in my drive C. Since then anytime i put on system it show the BSOD at approximately 3 minutes after booting. Currently my system only works fine in safe mode.
View 2 Replies
View Related
Sep 16, 2011
My Laptop running Windows 7 gives an error when trying to boot and leads me to the Startup Repair. Startup Repair then gives the following message:Startup Repair Cannot repair this computer automaticallywith an option to Send Information or not to Send Information The Problem details log leaves the following information:Problem signature:Problem Event Name: StartupRepairOfflineProblem Event Signature 01: 6.1.7600.16358Problem Event Signature 02: 6.1.7600.16358Problem Event Signature 03: unknownProblem Event Signature 04: 21201029Problem Event Signature 05: External MediaProblem Event Signature 06: 11Problem Event Signature 07: NoBootFailureOs Version: 6.1.7600.2.0.0.256.1Locale ID: 1033I tried using the Windows 7 disk to go back to a previous restore point before the problem occurred and I received this error message again after starting with out the Windows 7 disk
View 1 Replies
View Related
Feb 23, 2012
I work at the IT department of a school where we have around 600 PC's that need to be maintained. Most things break by the kids and most is fixed my replacing, or simply imaging said computers again.However, after having switched over from Windows XP to Windows 7 we've been having masses of BSODs when loading Windows. Not just the normal PC's, not just linked to one type (although pretty much everything is from HP). But it keeps happening.The most common errors that we've been able to discover are:0x00000018, 0x0000000A, 0x0000007E, 0x000000BE.After having researched these things, they all turned out to have something to do with drivers, not only that, but when trying to boot into safe mode the PC's would all freeze at "classpnp.sys" and sometimes reboot shortly after.Our current solution is simply putting a new Windows 7 image over the computer and it'll work another day or two. It's great that it works again then, but we spend too much time on it.
It can't possibly be the hardware, there are too many different kinds of computers for it to be that. I'm quite sure the problem is somewhere originating from the drivers we install, but then he question comes as to what ruins the drivers? Not to mention that there are also different drivers for the different kinds of PC's.
View 9 Replies
View Related
Jun 12, 2012
I have these problems with my dell xps m1330 and I also can't boot into safe mode, what do I do? Also when I try to reinstall windows from USB it loads a black screen with movable mouse.
View 9 Replies
View Related
Jul 22, 2012
To start off, I would like to explain the situation the laptop was in when I received it from my sister and what she informed me of how it happened. The laptop has only one hard drive, it is running one partition of Windows 7 Ultimate 32 bit.The computer froze while she was listening to music, the hard drive activity was halted, music was stuttering, she forced shutdown after ten minutes of no response. The computer then noted the inability to boot after the POST was initiated. A screen appeared noting Windows 7 needed to run a start-up repair before beginning (Running the start-up repair ended with a long boot time and eventually hanging up with a black screen with an enlarged cursor that could be moved, no further progress. The second option to start with the last settings for boot resulted in the same result as the first. What I did to fix this problem, I tried using safe-mode to see if the problem was driver based or software based, as my sister noted she did not install or tamper with any software before the problem, I was unsure of how to proceed. All attempts of booting into the various safe-mode protocols resulted in the computer hanging on loading CLASSPNP.SYS, then after a minute it would result in a BSOD with 'unable to mount boot volume'. The Windows 7 recovery disc lead to the same result of trying to do the repair or booting up normally, hanging with the large cursor in the middle. I eventually decided to load up some utilities and used a Gateway (The computer brand) hard drive scanner to attempt to fix the problem, this worked, miraculously. After this fixed the problem I was able to boot normally the first time, yet it ran startup repair, and fixed a few errors before booting. The system as it stands now,The system boots up in normal time without any errors. Safe mode still hangs and blue screens after stopping at loading CLASSPNP.SYS. I hoped to run chkdsk and sfc through the command prompt to try and see if it could fix this problem, yet both hang before running. 'sfc /scannow' through the command prompt gives the result 'Windows Resource Protection could not perform the requested operation'. 'chkdsk /r' through the command prompt runs at the next boot and gives an error along the lines of 'Windows can not run chkdsk due to a recent software change' and then proceeds to boot up without doing the scan. I've cleaned the system of malware using various tools to see if this was the problem, yet it does not seem to make a difference. I have attempted to replace the 'CLASSPNP.SYS' with a working copy off of my computer, yet it results in the same situation. Running start-up repair with the Windows 7 recovery disc does not work and says it is unable to proceed now, strangely.I am wondering if doing an upgrade to the same copy of Windows 7 will allow me to have a clean boot record and hopefully fix the problem. It creates a 'Windows.old'; this should be fine for the current situation, right? My sister plays various games such as the Sims 3 and a few others, and has 40GB+ of music on here that she does not want to lose. Will performing an upgrade(if possible in this situation?) keep the music, and actual application folders that could be run on the upgraded system? If not, I could scrounge up a hard drive to create a backup of the music and the game save files, but it would be annoying to have to install all of the game over again.
View 2 Replies
View Related
Aug 12, 2010
I've reached the last straw with my attempts to install windows 7 64 bit onto my PC the story goes as this;
I needed to upgrade from windows XP 32bit to Windows 7 64bit however when I installed my first Windows 7 package I didnt realise but it was infact 32bit so to my annoyance I reformatted back to XP 32bit, (I need 64bit to run several things on my computer such as high end games) in the mean time my family told me they wanted windows 7 on their PC, so using their PC I created a USB boot disk and used it on my bare-bones PC (The one I'd recently reset to XP), this brought up my first Disk Read Error.
Annoyed I tried a few different ways of making a USB boot only to always be brought to the same error, deciding to do the family PC first I used the same boot which had brought up an error on MY PC in my families PC and it worked like a charm. Not a single issue and Windows 7 64bit was installed within the hour. USing this new platform I created a -new- USB boot disk thinking that if I made a 64bit boot off a 64bit system it would have more luck ... No it didnt.
I've tried all sorts of BIOS options but every time it just brings up the same error, I attempt to change the 64bit bootsect.exe to a 32bit one and it didnt bring up the error but then told me files were corrupt. I have unfortunatly only got one ... long ... answer left.
I install windows 32bit again, then use that platform to clean install 64bit windows7 but I doubt that'll work.
For the record I KNOW I cannot upgrade from 32 to 64, I WANT to do a CLEAN INSTALL!
View 5 Replies
View Related
