Networking Windows 7 Starter An Existing Network With XP On All
May 23, 2011
i just bought a dell latitude D40 which has win 7 starter installed for the OS. i have 3 other pc's all networked (home network) together and all have win xp prof. i would like to network the the dell (win 7 starter) to the other 3 computers but after doing some research i find that one of the pc's on the network must have win 7 for an OS.just to be sure i'm understanding correctly, is this true ? I'm probably going to have to reformat and reinstall windows on one of the pc's on the network pretty soon. when i reinstall windows, could i install win 7 starter or would i need to install the full blown version(so that i can network the laptop to the other 3 already on the home network
View 4 Replies
ADVERTISEMENT
Jun 7, 2010
I just installed Windows 7 Starter side by side with Windows 7 Ultimate 32-bit (it doesn't matter why) and on 7 Starter it is not detecting any wireless networks. The 7 Ultimate detects networks (and is connected to one) but the 7 Starter does not. The computer is a Gateway LT2104u Netbook.
View 4 Replies
View Related
Dec 5, 2009
I have a new Win 7 PC. I have an existing two XP PC home network. The existing network successfully shares files and a printer. Integrating the new Win 7 PC into my network, I have been half successful. I have internet access through the existing router on all three PCs and I have printer access on all three PCs since moving the printer to the Win 7 machine. Both XPs can see the Win 7 machine on the network.
This is where things go off the rails for me though. The Win 7 machine cannot see anything in its network except itself and the router. Keep in mind that certain apps can see back and forth. Windows Easy Transfer was able to see my XP machine from the Win 7 machine and move all my files over just fine. Norton NIS 2009 can see all 3 PCs from all 3 PCs and interact with each perfectly fine.
Likewise, the XP PCs aren't quite there yet either. They alternate between having 100% access to the Win 7 public USERS share and having no access at all - with no changes being made to the setting. Currently it is not accessible and I might not have permission to use this network resource. Interestingly with the XP to Win 7 connection fails, it fails on both XP computers at the same time. Either both work just fine or neither works at all.
All three PCs are in the same workgroup. All three have the same user account names and passwords. In Win 7, Network discovery is on along with all the other Advance Network Sharing features. I am currently sharing the Win 7 shares with Everyone. I have tried shutting the firewall off and leaving it on. All three are set at Full Trust for NIS 2009.
View 9 Replies
View Related
Jul 14, 2011
Currently I have an internal network (no internet access), with a few XP workstations conencted via a hub, working fine. When I added a Win 7 computer, it cannot connect to the network. It says "unidentified network" and when I run troubleshooter, result is "does not have a valid IP configuration." Note that all the XP computers are using the NetBIOS protocol; TCP/IP is not selected.
View 9 Replies
View Related
May 2, 2012
how to add a new computer to an existing wireless internet
View 2 Replies
View Related
Aug 29, 2009
How do I network my Windows 7 desktop to my windows XP home network?
View 2 Replies
View Related
Apr 15, 2012
About 2 years ago I bought Belkin router to set wireless connection from modem to 3 PC's at my apartment. But recently I learned that I have to secure it, to set a passworded setup. Where, in what utility I can do it?
View 1 Replies
View Related
Dec 24, 2011
After reformatting my laptops hard drive, it is unable to see the existing homegroup on my wireless network. Before the reformat, I was able to share files and printers using the existing homegroup on my main desktop computer. I have tried homegroup troubleshooter without success.
View 9 Replies
View Related
Aug 15, 2012
I've found threads that were similiar, but the suggested solutions are not working for me. What screenshots and information do youdetermine why I can't get 7 to even see that there's a named network it's connected to?
View 1 Replies
View Related
May 11, 2012
I am having a hard time configuring my Access point. I have a DSL Router connected to our telephone line and it works fine wirelessly, Yesterday I purchased TP LINK Router to configure as Access Point to extend wireless signal up to the second floor. Now, I am wondering, should I do some re-configuration on my DSL Router before configuring my TP Link Router? Guys, Please share your thoughts and if you have knowledge on how to configure my 2nd Router to my WifiNOTE: I followed the user guide manual that came with my TP LINK router but it is no USE. I just need to know if should I reconfigure my 1st Router in order to communicate with my 2nd Router.
View 4 Replies
View Related
Jul 12, 2011
I am currently having a problem that has been troubling me for a long time, I've looked all over the internet and I still haven't found a solution. My problem is that my XP network cannot access my Win7 server, but its not the same problem that has so many solutions around on the internet.Here is my situation:I have 2 networks in my office.
-Network1 consists of 3 WinXP machines connected via Router1 to Modem1 to the internet.
-Network2 consists of 7 64-bit Windows7 machines connected via a Switch to Router2 to Modem2 and then to the internet.
I also have a server machine running Windows7 64bit with two network cards. One NIC is connected to Router1, the other connected to the Switch. All of the above machines are all under the same work group: WORKGROUP.My Windows7 machines on Network2 can interact fine with the server. However, my WinXP machines cannot access the server "most" of the time, I've had a rare few occasions where it magically worked.
View 2 Replies
View Related
Jan 25, 2012
I have gone through nearly every single thread made by someone with the same problem, but everything I have tried has ended up unsuccessful. I am at the end of my rope with this problem, and it needs to be corrected now. I'm a senior in high school and using my mother's Asus eee PC (model number 1001PXD) for classes. Since this netbook does not have access to the school's networks, I am using the multiple "Guest" access points. For some reason, I am able to connect in some areas with little to no trouble out of the "Unidentified Network" problem during certain times of the day, and others I can't connect at all (ironically, this usually happens when I REALLY need to access the internet for online courses). I am not at all far from any of the access points, and the signal is excellent when I DO manage to log on.
The same netbook logs on to the networks in mine and my grandmother's homes no problem. It only has an issue with the school's "Guest" network.I don't know if this is significant or not, but I find it rather curious that my Nintendo 3DS cannot connect to the "Guest" network at all. I will include a screenshot of my "IPCONFIG /all" settings, and I will post more if needed.
View 2 Replies
View Related
Oct 19, 2012
how to configure my wireless router WNR500 to my existing wireless network
View 1 Replies
View Related
Feb 4, 2012
Have main computer win 7 and works fine with virgin hub. Have aquired second computer running xp pro and won't set up with hub. Keeps trying dial up and failing to recognise connection to hub.
View 4 Replies
View Related
May 27, 2011
i am re-installing WIN-7 on a previously installed WIN-7 (the same OS). But the prob is that, i had installed it with XP already loaded. Now that i want to re install WIN-7,
1. will it affect XP
2.Should i reinstall XP??
3. I want XP to be as it is..
View 3 Replies
View Related
Dec 22, 2012
I recently bought a canon 7D which works perfectly with my laptop, however my existing G6 will not work with windows7 no matter what i download. I have downloaded updates to software and the latest codec but to no avail.
View 1 Replies
View Related
Jul 10, 2011
Can I remote desktop from windows 7 starter to any computer with XP or 7, without upgrading to 7 Premium? I am looking to buy a net book that has 7 starter loaded on it, but if it can't remote connect then I need to rethink it. I know most net book's do not have enough RAM to run 7.
View 1 Replies
View Related
Dec 16, 2011
I have a friend who has spyware on their computer. It's a Vista machine that's so far gone that the only option would be to wipe it (unless someone else has a better solution).
But I have a copy of Win7 Pro from Newegg that's been used already for a computer build I did.
But, could I use this disk alongside a student license code for Win7 Pro?
View 2 Replies
View Related
Feb 18, 2011
i cant seem to find a thread that will tell me so, but i currently have win 7 64bit which is my main system, but also its partioned with xp, what i need to do is reinstal windows 7 again but dont want to loose my xp. do i have to delete windows 7 first before instaling, its time my pc had a good clear up.
View 2 Replies
View Related
Sep 27, 2012
I have a 6 month old Samsung ultraportable that has developed Windows problems and I am trying to re-install Windows 7 Pro. The history is that Windows 7 Home Premium came pre-installed, and I upgraded to 7 Pro right after I bought it, with no problems. Everything has been great until the last 2 weeks when the laptop would not start. After trying multiple times to recover, including the Windows recovery disc and Samsung's internal recovery options, I have given up and am now attempting a clean, fresh re-install. I have already done this once (yesterday) and I am having the same non-start problems.
In an attempt to do this in a truly clean way, I want to wipe out everything that might be leftover. My question is how to do this, particularly regarding the partitions that are already setup on the laptop. Here are the partitions that setup is finding:
Disk 0 Partition 1, 10.6 GB/0.0 MB free; "Primary"
Disk 0 Partition 1, 4.3 GB/4.3 GB free; "OEM (Reserved)"
Disk 1 Partition 1, 100 MB/70 MB free; "System"
Disk 1 Partition 2, 446 GB/393 GB free; "Primary"
Disk 1 Partition 3, 19.7 GB/959 MB free; "OEM (Reserved)" - this one is also named "SAMSUNG_REC"
Questions:
1. Should I leave all these partitions intact, or delete them and start over?
2. If I should leave them intact, into which partition should I install the fresh version of Windows 7 Pro?
3. What is your advice on whether other partitions should be set up for A) programs, and B) data (documents, photos, music, etc)?
View 7 Replies
View Related
Jul 8, 2010
Just this week I noticed I had a Windows Update icon in my system tray. When I opened it up I got an error stating that it could not check for windows updates. It also had the error code of 80070490. I've tried running the Readiness Tool that was suggested in the Windows knowledge base article but that didn't fix it. The only other option that I have been able to find is to re-install (or re-upgrade) my operating system. I am running Windows Vista Ultimate on this laptop and I'm not sure if I have the CD/DVD of the operating system as the OS came installed on my laptop when I got it (from Lenovo). So, I've decided that since I was going to upgrade to Windows 7 at some point, I might as well do it now.My question is I'm wondering if this Windows Update problem will somehow hamper the upgrade to Windows 7. Does anyone know? I don't want to buy the upgrade package and try to preserve my files and program installations only to have this Windows Upgrade piece be a key component of the upgrade to Windows 7 and it all fail.
View 3 Replies
View Related
May 8, 2011
how to reformat my drive c with existing Windows 7 and reinstall Windows 7 again?
View 5 Replies
View Related
Dec 12, 2009
I have a windows 7 DVD provided by my school that says "64-bit x64 upgrade: Pre-existing OS license Required"
I have one desktop computer with Vista and one laptop also with vista (both with legit keys & activation)
Question is: can the upgrade DVD be used on the two machine ?
Will it require the old vista key, the new win7 one, or both ?
View 2 Replies
View Related
Oct 21, 2011
For stability / application continuity reasons, when I built my computer 1.5 years ago I went with XP Home on an SSD. It's great. Boot times in a blink, even 18 months later. I knew I would eventually want to learn and migrate to Windows 7. That has pretty much happened now. My WEI is pretty low, just because of the hard drive I installed it on--I have Windows 7 64 Ultimate installed on a partition of my 1TB data drive. The poor drive has like 4 partitions. That was probably ill-advised. Anyway, I want to:Partition the SSD, keeping the XP install intact Move my Windows 7 installation to the SSD on the new partition.
View 4 Replies
View Related
Apr 19, 2012
I have a setup running with 1 physical SATA disk divided in two partitions (C,D). Tomorrow i am receiving an 120GB SSD. I am planning on disconnecting the HDD and plugging the SSD with AHCI enabled in the bios and performing a clean install.I need help for the steps after that, what is going to happen when i plug in the HDD in the 2nd SATA port? Will windows boot from the SSD and see the two partitions as D & E? If this is the case can i merge the 2 partitions after that and not lose any data? The purpose as you can see is to install fresh Win 7 on the SSD and plug in the HDD after that for storage purposes only but want 1 partition to it.
View 10 Replies
View Related
Jun 18, 2012
I have a 1TB drive I want to install windows on. There is no existing windows installation on the drive, only music, movies, and other files and documents. Is it OK to install windows without formatting this drive? I don't have anything to back up all they data.
View 4 Replies
View Related
Jul 24, 2012
i have a windows7 laptop and i have to install windowsxp. but the problem is that there is an error screen after showing the ''SET UP IS STARTING WINDOWS'
View 4 Replies
View Related
Nov 25, 2012
My HP mini laptop has been distructed its program and the Swedish keyboard and word program turn up side down...I want to reboot or reformat so it will be in its normal program.
View 1 Replies
View Related
Apr 22, 2011
when i update my windows 7 to sp 1 doesn't show other computers in my wireless network and can't ping other PCs but when i connect to wired lan every thing work fine firewall is off,network discovery is on,no antiviruses has installed and microsoft security essentials is fully disable?
View 4 Replies
View Related
May 3, 2011
I have a Toshiba Satellite running Windows 7 home pre and a desk top running the same. I want to network the two together so I can share external Hard Drives and such. I want to do this so the files can only be seen and or read by my two computers. I have a room mate who is also running windows 7. What can i do to make sure he dose not have access to my computers?
Both are connected to the internet VIA wireless connection. ( router in room mates room ) I have both computers connected together via a cross over cable also.
View 7 Replies
View Related
Jul 14, 2011
i am quite disappointed to see the lack of support for Microsoft's Virtual PC networking configurations. If there is anyone that can help me with this,I have Windows 7 Ultimate x64 as primary OS installed. I have also installed Microsoft Virtual PC 2007 (not Windows XP Mode). Inside this virtual machine, I have installed Windows XP Professional (x86). I need to have the Windows XP connect to Windows 7 via networking. According to most threads, I need to install Microsoft Loopback Adapter in Win 7 to be able to connect the VM to Win 7. I have configured the loopback adapter (on Win 7) to use IP 192.168.1.1, subnet 255.255.255.0, no default gateway and DNS server addresses. On the virtual machine, I have set the LAN connection to use IP 192.168.1.2, subnet 255.255.255.0, no default gateway and DNS server addresses. No connection.
View 2 Replies
View Related
