I've found threads that were similiar, but the suggested solutions are not working for me. What screenshots and information do youdetermine why I can't get 7 to even see that there's a named network it's connected to?
View 1 Repliesdell has informed me that my problem with my PC Is that windows 7 can't reconize the local network interface driver and told me that it's a software issue. I reinstalled the local network interface driver from the original cd that came with the PC and 2x's restored the computer to another time and then restored it back to the factory settings-with a Dell tech on the phone- nothing helped. This problem started one morning when lighting was felt/heard very close to our home and in fact burned out our verizon moden/box that Verizon replaced. From this point I wasn't able to go on line because there was no local network avail for verizon to connect to is how I understand it.
View 9 Replies View RelatedSo yesterday in the early AM's I was browsing my internet and all the sudden, bam.i lost my internet.No reason at all, it just happened. This is only my computer, everything else works fine (If internet is out, our TV's don't work)When I go to my little internet icon in the taskbar, it says Unidentified Network and I have no internet access what so ever.When I run CMD and use ipconfig /release I get this:"An error occurred while releasing interface Loopback Pseudo-Interface 1 : The system cannot find the file specified."I also got this error before:"An error occurred while releasing interface Local Area Connection : An address has not yet been associated with the network endpoint." Tech support kept telling me to use ipconfig /flushdns but whenever I entered it into CMD it gave me an error saying something along the lines of "command unrecognized" I cannot give you guys the full text of what CMD says since it's on a different computer.I am using a direct ethernet cord, not wireless.
* ipconfig /release and /renew and /flushdns
* Turn off firewall
* Update and Reinstall Driver
* Restarting my modem/router
* Restarting my computer
* Unplugging my ethernet cord and replugging it (also leaving it unplugged over-night)
* Manually assigning the 12 code I'm assuming IP
I have a new Win 7 PC. I have an existing two XP PC home network. The existing network successfully shares files and a printer. Integrating the new Win 7 PC into my network, I have been half successful. I have internet access through the existing router on all three PCs and I have printer access on all three PCs since moving the printer to the Win 7 machine. Both XPs can see the Win 7 machine on the network.
This is where things go off the rails for me though. The Win 7 machine cannot see anything in its network except itself and the router. Keep in mind that certain apps can see back and forth. Windows Easy Transfer was able to see my XP machine from the Win 7 machine and move all my files over just fine. Norton NIS 2009 can see all 3 PCs from all 3 PCs and interact with each perfectly fine.
Likewise, the XP PCs aren't quite there yet either. They alternate between having 100% access to the Win 7 public USERS share and having no access at all - with no changes being made to the setting. Currently it is not accessible and I might not have permission to use this network resource. Interestingly with the XP to Win 7 connection fails, it fails on both XP computers at the same time. Either both work just fine or neither works at all.
All three PCs are in the same workgroup. All three have the same user account names and passwords. In Win 7, Network discovery is on along with all the other Advance Network Sharing features. I am currently sharing the Win 7 shares with Everyone. I have tried shutting the firewall off and leaving it on. All three are set at Full Trust for NIS 2009.
Hp 2000 laptop network controller driver
View 1 Replies View RelatedI search wifi driver for my ALTEC LANSING HP 2000.
View 1 Replies View RelatedCurrently I have an internal network (no internet access), with a few XP workstations conencted via a hub, working fine. When I added a Win 7 computer, it cannot connect to the network. It says "unidentified network" and when I run troubleshooter, result is "does not have a valid IP configuration." Note that all the XP computers are using the NetBIOS protocol; TCP/IP is not selected.
View 9 Replies View Relatedhow to add a new computer to an existing wireless internet
View 2 Replies View RelatedI am having difficulties accessing the network share to my Windows 2000 printer [printer attatched via USB to Win2000 computer, shared among all computers]. Both computers are behind a router, and are on the same workgroup.
My Vista machine did not have any problems accessing this printer or authenticating to Windows 2000, but Windows 7 seems to. The problem is when I go to connect to the PC, I am prompted for a username and password, but upon entering a valid one, it does not connect and comes back as invalid.
I attempted to navigate to the share manually through the "add pritner" device, but this did not work either. [Giving //computername/printer]
Using Windows7 RC1, build 7100 and Windows 2000 SP4. No difficulty sharing or authenticating on the LAN with any other OS.
About 2 years ago I bought Belkin router to set wireless connection from modem to 3 PC's at my apartment. But recently I learned that I have to secure it, to set a passworded setup. Where, in what utility I can do it?
View 1 Replies View Relatedi just bought a dell latitude D40 which has win 7 starter installed for the OS. i have 3 other pc's all networked (home network) together and all have win xp prof. i would like to network the the dell (win 7 starter) to the other 3 computers but after doing some research i find that one of the pc's on the network must have win 7 for an OS.just to be sure i'm understanding correctly, is this true ? I'm probably going to have to reformat and reinstall windows on one of the pc's on the network pretty soon. when i reinstall windows, could i install win 7 starter or would i need to install the full blown version(so that i can network the laptop to the other 3 already on the home network
View 4 Replies View RelatedAfter reformatting my laptops hard drive, it is unable to see the existing homegroup on my wireless network. Before the reformat, I was able to share files and printers using the existing homegroup on my main desktop computer. I have tried homegroup troubleshooter without success.
View 9 Replies View RelatedI am having a hard time configuring my Access point. I have a DSL Router connected to our telephone line and it works fine wirelessly, Yesterday I purchased TP LINK Router to configure as Access Point to extend wireless signal up to the second floor. Now, I am wondering, should I do some re-configuration on my DSL Router before configuring my TP Link Router? Guys, Please share your thoughts and if you have knowledge on how to configure my 2nd Router to my WifiNOTE: I followed the user guide manual that came with my TP LINK router but it is no USE. I just need to know if should I reconfigure my 1st Router in order to communicate with my 2nd Router.
View 4 Replies View RelatedWe have a Windows 7 laptop that we have on a wired network. The network seems fast to access all the other computers on the network (4). However, when we try to run a program from our Windows 2000 machine it takes a super long time to load and is slow to respond to network requests. The other computers on the network are running XP and have no problem with this computer or this program. We are running a DLink router thru a Dlink Switch to the network.
View 3 Replies View Relatedhow to configure my wireless router WNR500 to my existing wireless network
View 1 Replies View RelatedI am using windows 7 professional 32bit. I have my pendrive named 'jerry' . when i connect any pendrive to my computer it gets renamed automatically to 'JERRY'. I dont know why this happens .
View 2 Replies View Relatedthese randomly named folders? These folders show up at the whim of Windows and require additional security to access the subfolder which is empty. This is an HP G72 laptop with an Intel I3 processor so the amd64 name is very misleading. L:8a98f4a55a320d4390f197amd64 L:c82aba78a037e47cfbamd64
View 4 Replies View RelatedWhen I start my PC it shows a message that "your file named NTFS is corrupt". Then PC screen becomes Blue and shutdown my PC! Should I change my hard drive?
View 2 Replies View RelatedI can't seem to find any working solution to properly install named Soundcard under Windows 7/64. I know its a driver problem on behalf of the Souncard manufacturer. Can Microsoft not make a generic driver to fix this?The chipset used on this Terratec is a commonly used soundcard chipset if I'm not mistaken. Surely MS can conjure up a driver that will work and not let my Soundcard crash the whole PC just bc I want to listen to some music?
View 1 Replies View Relatedi have been trying to load Calibre and ebook manager and get this msg
Python function terminated unexpectedly No module named win32event (Error Code:1)
The program was working ok then this error started showing up ? Did i delete a file by mistake?
I couldn't delete a file named autorun.inf even i can't format it. so i can't install new xp os over older OS.
View 1 Replies View RelatedThere is folder named Shredder on desktop, I can't delete it and i can't open it. I was trying with BT4 live cd and I didn't even saw it on my desktop through it, also tried bunch of different programs but still nothing. How could I erase it? I tried from safe mode, and I couldn't delete it.
View 8 Replies View RelatedFrom somewhere, somehow, a folder named "24cd9e4542d29590bce925ec30" has been created in my W7x86pro root dir. Trying to look inside, I had to "permanently get access". But then inside it, there are a whole lot of folders named things like 1025, 1028, 1029, etc, ending with 3076, and 3082. What's in those folders, I have no idea, since every time I try to open one, I first get the "You don't currently have permission to access this folder" dialog, and then when I click Continue, I get "You have been denied permission to access this folder".
Also inside the "24cd9e4542d29590bce925ec30" folder, there are files, like "Setup.exe" and "NDP40-KB2473228.msp" and "SetupEngine.dll" and some *.bmp and some other files. I guess that NDP40-KB2473228.msp gives away that this folder has something to do with some .NET framework update, but AFAIK, there's no .NET-anything installed on this computer. I want to remove the "24cd9e4542d29590bce925ec30" folder, but there seems to be no way I can get permission to do that. trying to get ownership or set access rights, all I get is "Access denied" or similar.
1. What those folders and files are doing there?
2. How do I remove them?
I have been using accronis 2011 for a long while, cloning the c drive to a d drive every Saturday. For the first time I had cause to restore the clone on d to c driveI believed that acroniss clone made an exact copy of a drive to another. Since I did this I can't get into windows explore, my computer or any of the right hand sde of the start screen, programs are no problem.. When I try to get in I get the meassage " No such interace supported"
View 1 Replies View RelatedI plugged in my HDMI cable to my laptop. I get only video, without sound. I discovered that i have to select the S/PDIF settings. BUT, i only see the "speaker" settings. I have selected and deselected the "show disabled devices", to no avail. What am i doing wrong? I am trying to get the sound to play through my HDMI cable. I have googled this problem and found solutions with all of them being that i have to select the S/PDIF...and i don't even have it listed as an option and no way of knowing how i can get it to show up.
View 4 Replies View RelatedI am using WIN7, sp.1, 64bit, Internet Exployer, Can someone pls help me with "error" No Such Interface Supported.
View 5 Replies View RelatedI have my Windows update settings to "notify but do not download." When I check my history of restore points I see that there are several created anyway with the description "Windows Update-Critical Update." I checked one of them for changes to programs and drivers and the were none. This seems to happening about every 3 days. Is this just an automatic update that is mislabeled? And why every three days - from my research it appears recovery points are supposedly scheduled every seven days?
View 4 Replies View RelatedI just turned on my sony vaio laptop that runs windows 7 home premium and when I try to run any type of application, it shows an error saying "No such interface supported" I've tried everything in the forum and nothings working. I can't get into regedit.exe to fix the registry and the error pops up when i try to
do a recovery, and also I don't have a back up. The weird thing is that it can run programs through other ways. I was able to open itunes by manually clicking a song, and I had to manually turn on my wireless hardware to get internet connection.
I uninstalled a couple of toolbars for Firefox the other day using the Uninstaller in Advanced System Care 5. I think it was the Power Clean utility which has caused the problem. Now I cant access any of my folders or shortcuts on my desktop or in the Start Menu (Control Panel, My Computer, Documents etc.) the msg 'no such interface supported' pops up. The USB connections are not working either. All non windows programs are working fine such as Mozilla, Bit Torrent, Picasa and Wifi. Do I need to reinstall Windows 7to fix the problem and will reinstalling Windows wipe all my data of my hard drives? I returned the computer to the previous restore point but it had no effect
View 9 Replies View RelatedSome Interface of software is changed and becomes larger
View 1 Replies View RelatedI recently upgraded to IE9 and I am absolutely appaled at the interface. The changes in it remind me of why I usually hate upgrading my software in the first place.To get to the point: Is there any way to restore some or all of the interface of IE7/8? Items of note that I'd like to alter include:Restoring the Favorites menu to the left side of the page.Having the convienent small Google search bar on the right side, as opposed to the full on Google toolbar which requires its own row.Ensuring tabs are on the bottom of any and all toolbars, instead of forced to be right under the address bar.My biggest problem is that the only way to get a convienent search bar is to have it BELOW the tabs. I tried unlocking the toolbars and trying to move them (as has been possible in the past), but it was impossible to move them. They simply refused to change location.
View 2 Replies View Related