After reformatting my laptops hard drive, it is unable to see the existing homegroup on my wireless network. Before the reformat, I was able to share files and printers using the existing homegroup on my main desktop computer. I have tried homegroup troubleshooter without success.
View 9 Replieshow to configure my wireless router WNR500 to my existing wireless network
View 1 Replies View Relatedhow to add a new computer to an existing wireless internet
View 2 Replies View RelatedAbout 2 years ago I bought Belkin router to set wireless connection from modem to 3 PC's at my apartment. But recently I learned that I have to secure it, to set a passworded setup. Where, in what utility I can do it?
View 1 Replies View RelatedYou have already checked all your settings and have done everything right. Your hard wired network connections work fine. When you go to wireless all your homegroup and network locations or most of them vanish with no resolution.Quick Solution: Make sure the time your router is keeping is the same as your network computers, including turning on Daylight Savings if applicable.Explanation:There are several threads on the internet about Windows 7 not finding workgroup or network printers or computers on wireless notebooks. This was after people painstakenly went through all the trouble shooters, turned off and restarted their firewalls and antivirus, rebooted and rebooted, reset and reset over and over again, checked all their settings and did everything right and still could not resolve their problem.
There is a likely resolution for this problem - at least it worked for me. It took me nearly a week to find this solution.Occasionally, when running the homegroup troubleshooter, I got the message that the time was not the same on all the network computers. I went around and checked all the computers and the time was the same - so why the message?However when I went to the router, I found that daylight savings was not turned on and the time the router was keeping was an hour different from everything else. Low and behold when I corrected the time on the router all the connection problems were resolved on the notebooks.
Prior to Saturday morning, my computer was able to detect the router and connect to the internet. However, as of yesterday, my computer is no longer able to see any wireless networks.My dad did change the frequency of the router yesterday, but all the other PC's in the house are able to connect again - except for mine. I've tried rebooting the livebox, rebooting my PC, pressing the wi-fi button, changing my adapter's usb slot and also reinstalling my adapter's drivers. None of these have made a difference.
View 3 Replies View Relatedthe icon says i am not connected and there is a network available but i am actually connected!
View 9 Replies View RelatedJust started having problems connection to any network or internet. Have new lappy that was working great until today. I am going out of town for a while and I was setting up my Slingbox. Somewhere along the line, I lost ANY connections, even to the router.
Have tried 3 different restore points. Can connect with wire to the router & get internet. HP, 64 bit.
Have a brand new pavailion quad cord windows 7 home premium 64bit. i also purchased a usb wireless adapter[url]...
this adapter was working fine for a few hours. the internet connection is cable, the adapter gets about two bars of connectivity, and now when i try to connect to network i get unable to connect to network. i have removed the wirless network, have added it back, entered the security key and nothing. i have a netgear wireless router. not sure what the deal is. i have made sure the power settings on the adapter are off, and this adapter doesnt seem to have the sleep mode option on it. windows 7 also found the drivers automatically. the machine is brand new, other machines/devices on in the house get to the internet just fine.
When i am in sch, i can use my sch wireless.However, when i reached home whenever i try to connect to my wireless network but its say unidentified network. My sis have no issue with the internet.The problem is solved whenever i restart my modem. Anyone here can kindly tell me how to solve this problem? I am running on windows 7 professional with my sch domain connected to my com.
View 2 Replies View RelatedI have a fairly new Toshiba Satellite P755 laptop and just started having an issue connecting to my Netgear wireless internet network since yesterday. The issue is that every time I turn on my laptop after it was off or hibernated my computer won't connect to my wireless network but I do see it available to connect to. When I try to connect it won't work unless I reset or unplug the router and plug it in again (Windows Diagnostic Tool says check router access points). Once I do that and wait a couple minutes I can connect to my network again. I have a Realtek RTL8188CE Wireless card and made sure my drivers were up to date. I have tried unchecking the option under Device Manager to not use it if the battery is low and that didn't work. I also tried to system restore and when I did that I got the following error: (0xc0000022) which says an unspecified error occurred and my files and settings were not changed. I have AVG Free 2013 and haven't made any new changes or updates recently.
View 6 Replies View RelatedYesterday I moved into a new apartment in Vancouver, Canada. Several friends came up with me to help me move in. My friends were able to connect to the wireless network. However, as soon as I tried connecting to the network, the wireless signal began to appear and disappear rapidly for everyone connected, effectively cutting off wireless access. This problem only occurs when I sign on. Furthermore.
[code]....
In Windows Home Premium 64bit we encounter this problem on a machine after trying to uninstall a norton product manually.The norton software led to serious problems of randomly emerging BSODs.As system uninstall did not work we researched a tutorial on how to manually uninstall the soft.t can be found here Enterprise Support - Symantec Corp. - How to manually uninstall the Symantec Endpoint Protection client from Windows Vista, Windows 7, and Windows 2008 R2 64-bitEverything worked smoothly until the last three steps of the routine failed (12.-14We can not uninstall/delete the wireless network adapters as described. After clicking "uninstall" there is the window that asks for confirmation (to uninstall) but after clicking "yes" the device manager window simply refreshes - and the device remains unchanged.
View 4 Replies View RelatedI have just installed Windows 7 onto my Dell Inspiron 6400 laptop. My laptop now detects a number of wireless networks in the vicinity but not my own. It is not a problem with my router because other laptops can pick up the connection no problem. I have Googled this problem and see a lot on issues with Windows 7 and picking up wireless signals. But I haven't seen any threads which deal specifically with the situation where only one wireless network cannot be detected.
View 3 Replies View Relatedwe installed a wireless router so that we can use botha desktop computer and a laptop.we cannot get on the internet with the laptop. we have optimen service
View 3 Replies View RelatedI have a PC running Windows7 on which I have set up Homegroup, complete with password. I also have a laptop running Windows7 on which I tried to run Join Homegroup. I was told in the instructions to go to Start/Computer/ and click on Homegroup in the left hand column the choose Join Now in the window that comes up. There is no "Join Now" box in the window that comes up and I therefore cannot start a Homegroup. I have a Wi-Fi modem which connects me to the net wirelessly and My PC has a wireless card which works fine as far as I can tel
View 5 Replies View RelatedI have a new Win 7 PC. I have an existing two XP PC home network. The existing network successfully shares files and a printer. Integrating the new Win 7 PC into my network, I have been half successful. I have internet access through the existing router on all three PCs and I have printer access on all three PCs since moving the printer to the Win 7 machine. Both XPs can see the Win 7 machine on the network.
This is where things go off the rails for me though. The Win 7 machine cannot see anything in its network except itself and the router. Keep in mind that certain apps can see back and forth. Windows Easy Transfer was able to see my XP machine from the Win 7 machine and move all my files over just fine. Norton NIS 2009 can see all 3 PCs from all 3 PCs and interact with each perfectly fine.
Likewise, the XP PCs aren't quite there yet either. They alternate between having 100% access to the Win 7 public USERS share and having no access at all - with no changes being made to the setting. Currently it is not accessible and I might not have permission to use this network resource. Interestingly with the XP to Win 7 connection fails, it fails on both XP computers at the same time. Either both work just fine or neither works at all.
All three PCs are in the same workgroup. All three have the same user account names and passwords. In Win 7, Network discovery is on along with all the other Advance Network Sharing features. I am currently sharing the Win 7 shares with Everyone. I have tried shutting the firewall off and leaving it on. All three are set at Full Trust for NIS 2009.
Homegroup is working perfectly when both computer are connected to router by ethernet cable.
As soon as i unplug the cable from computer 1. None of the computer is recognizing the homegroup of the other.
I tried rebooting both computers. Leaving homegroup, rebooting create new homegroup >> nothing helps.
Both computer get internet, can connect to the router, both computer can see and share folders with each other via the the network sharing way.
Both ethernet & wireless connection show up as HOME NETWORK
I have executed the Homegroup troubleshooter on both computers No changes.
Any clues on this?
i have three computers. 2 laptops and one desktop when i go on network ansharing they all say that they are connected to homegroup. whenever i try to access any of the files on any of the computers nothing shows up all i get is a message saying not connected check that homegroup is active and that computers are not off/asleepany.
View 1 Replies View Relatedi have recently got a brand new machine and have updated from windows xp to windows 7. I have been trying to join the homegroup set up on my parents computer so i can access the printer. My computer is connected to my wired router before going into a ethernet connector in my wall and that then joins the modem. I am using norton internet security and so is my parents computer.
When my computer is plugged into the router and i go into 'trust control' in norton, my router shows up as full trust, but no other computers show up and when i try joining homegroups none show up. But when i plug my computer into the wall bypassing my router, norton shows all the computers on the network and lets me join the homegroup. So to summarise, i cant join homegroups when i am connected to my router, but i can join when i dont use the router.
Edit:
My router is a: Netgear WGR614v9
I have started a homegroup on my PC but I can`t see anything on my laptop to join to, Is there any thing I`m Missing ? I`m Using an ADSL modem-router And I can ping both computers from each other. also I`m Using nod32 as my antivirous-firewall and I even tried creating a homegroup when the firewall was disabled but it didn`t work.
View 3 Replies View RelatedI used to have a homegroup set up on computer B, but then i decided to host the homegroup from computer A (my most recent build) because computer A is running more often than any other computer now. So I set it up on computer A and set a password (I know they have to be case-sensitive). When I tried to get computer B to join the homegroup it said the password was incorrect. I know that this isn't the case. Computer C, D, etc. can join homegroup A, but computer B is being stubborn, and can no longer join other homegroups, or have other computers join its homegroup.
So I tried setting up a homegroup on computer B and seeing if computer A could join. Same problem occurred, incorrect password.
Currently I have an internal network (no internet access), with a few XP workstations conencted via a hub, working fine. When I added a Win 7 computer, it cannot connect to the network. It says "unidentified network" and when I run troubleshooter, result is "does not have a valid IP configuration." Note that all the XP computers are using the NetBIOS protocol; TCP/IP is not selected.
View 9 Replies View RelatedSo I used to have vista, xp, and mac on my pc. After a while xp screwed up and left me with only vista and mac. My school handed out a bunch of software including windows 7. I saved the installer and key on my desktop and pretty much just left it there for two months. Eventually my vista crashed and could have only used mac. After a very short while my mac crashed to. I saved my key on a piece of paper but unfortunately I lost the installer.
This morning I found a iso, burnt it on another computer and popped it in. Everything was fine until I was asked where I want windows to be installed. Due to the fact that I tried to fix vista from dos, my hard drive configuration got messed up. Regardless of that I didn't care because everything was backed up on a external so I tried to format all of my hard drives and then instal windows. "Setup was unable to create a new system partition or locate an existing system partition." What am I supposed to do?
Recently I've been having abyssmal internet speeds (like .1mb/s down when I am used to haven't at least 3-4 mb/s down). This is when I noticed that a homegroup was created on my network by a PC that is not associated with anything in my household. My wireless has always been secured with WPA-TKIP, but I guess someone has been able to get into my network and create a homegroup on it. So I obviously can't remove the homegroup since I don't have the homegroup password or access to the PC that created it (since it's kind of obvious some one has started stealing bandwidth recently). I went ahead and changed all of my router wireless security settings, but my concern is that my network can still be accessed through the homegroup that the intruder created even without the new keys. This PC is not showing on my network, however it isn't all that difficult to hide yourself. I would also like to know if there's any way for me to get this homegroup off my network completely since I may want to use the homegroup functionality at some point down the line.
View 1 Replies View RelatedCan I still print to the wireless printer if I disconnect the Homegroup? I do not wish to share files and see no point in joining a Homegroup.
Would removing the Homegroup cause internet connection problems?
i just bought a dell latitude D40 which has win 7 starter installed for the OS. i have 3 other pc's all networked (home network) together and all have win xp prof. i would like to network the the dell (win 7 starter) to the other 3 computers but after doing some research i find that one of the pc's on the network must have win 7 for an OS.just to be sure i'm understanding correctly, is this true ? I'm probably going to have to reformat and reinstall windows on one of the pc's on the network pretty soon. when i reinstall windows, could i install win 7 starter or would i need to install the full blown version(so that i can network the laptop to the other 3 already on the home network
View 4 Replies View RelatedI've found threads that were similiar, but the suggested solutions are not working for me. What screenshots and information do youdetermine why I can't get 7 to even see that there's a named network it's connected to?
View 1 Replies View RelatedThere are three computers. One is a desktop connected through a LAN. The 2 laptops is connected through wireless from the modem from the desktop. Anyways, one of the laptops has the printer. My laptop can only see the desktop. The laptop connected to the printer can see both the my laptop and the desktop. Lastly the desktop cannot see anything. Sorry if this is confusing. Anyone know why it's not detected. I need to print something out.
View 3 Replies View Relatedi recently notived that i cannot see my current logged in User on the network either in Homegroup or on the network itself. I can share other folders and files and see them but not my user..
View 2 Replies View RelatedI have been using windows 7 pto and xp pro on my laptop and desktop respectively. It was connected in same network from very beginning. I was in same workgroup. But as I reformatted my laptop cpl of days back I needed to connect it again with my xp desktop. since then I am not able to do so. Have been tried almost everything. I am in a same workgroup also have run the network wizard from xp. But nothing working. But just few hours ago i uninstalled few drivers (IPv6 related , not sure) while trying to connect from device manager.
View 1 Replies View Related