i recently notived that i cannot see my current logged in User on the network either in Homegroup or on the network itself. I can share other folders and files and see them but not my user..
View 2 Replies
So I checked on my network, just recently, and I saw some strange names connected. I saw BOYKA, KYLO-PC, RADULOVIC-PC, and my computer. I was freaking out, so I went to the DHCP Reservation on my routers setup and checked the devices connected. It was just my devices. But I still changed the password, but I was kind of reassured of the fact that it was probably just a program that accesses the network. But I googled all the names and no kind of software came up that may use these names displayed on the network, nor anyone else having this problem. I am worried that a people are accessing my network. Also, no one around my house has any of those names.Also I cannot create a homegroup because the user KYLO already has one on the network.
View 21 Replies View RelatedI'm trying to connect my Desktop and my laptop but my homegroup keeps asking for a user/password even though password protected sharing is turned off.
Funny thing is that I can connect from my desktop TO my laptop but not the other way around. I've read and tried everything I can.
There are three computers. One is a desktop connected through a LAN. The 2 laptops is connected through wireless from the modem from the desktop. Anyways, one of the laptops has the printer. My laptop can only see the desktop. The laptop connected to the printer can see both the my laptop and the desktop. Lastly the desktop cannot see anything. Sorry if this is confusing. Anyone know why it's not detected. I need to print something out.
View 3 Replies View RelatedI have been using windows 7 pto and xp pro on my laptop and desktop respectively. It was connected in same network from very beginning. I was in same workgroup. But as I reformatted my laptop cpl of days back I needed to connect it again with my xp desktop. since then I am not able to do so. Have been tried almost everything. I am in a same workgroup also have run the network wizard from xp. But nothing working. But just few hours ago i uninstalled few drivers (IPv6 related , not sure) while trying to connect from device manager.
View 1 Replies View RelatedI have a wired desktop and a wireless netbook. Both have 7 Ultimate. I set up HomeGroup on my desktop and my netbook can see & access my shared folders.
I also have a couple of printers. The one I want to be able to access is a wired HP Laserjet 4000. It's old, but built like a tank and has 64MB of RAM and a Jet Direct card. I have it plugged into a Cisco router. When I added the printer I chose "Add a network, wireless or Bluetooth printer". It locates the printer and assigns an IP address. As long as my desktop is on I can print to it from my netbook.
The problem is that I want to be able to print to the printer without having my desktop on like any small network. I should be able to since it has it's own IP address. It is on the correct port and everything in HomeGroup is working except printing while the desktop is off. I hesitate to install the massive Jet Direct software but I will if this will solve the problem.
I am very tired after staying up way too late doing a clean install of Ultimate on my desktop and reinstalling apps & arranging everything. I am thinking it has to be something simple I am overlooking ATM as I am not clear headed on 3 hours of sleep.
I've been all over these boards finding little bits of help for the issue I am having, but no solution. I've tried pretty much everything.
I have TWO PC's on my network. Since I like Star Wars I named one Ziost, and the other Mandalore. I have turned on Network Discovery on both machines in the Advanced Sharing Settings. I have both machines also set to "Allow Windows to manage homegroup connections (recommended)".
I have looked through all the services recommended by others to make sure they are running. They are on both machines.
I have both machines joined to a homegroup, however Ziost was unable to create a homegroup. The error message simply just said the homegroup could not be created on that machine. So I created the homegroup on Mandalore. No problem, it created just fine and spit out a password. Ziost was able to see the homegroup and join it just fine with the password given out.
I can access Mandalores folders FROM Ziost. And on Ziost I can see Madalore in the Network in Windows Explorer.
However, on Mandalore, it says I'm in a homegroup, but there are no PC's in the homegroup. And Mandalore cannot see Ziost in the Network section of Windows Explorer.
I thought it could be the default firewall settings. But on both machines the firewall settings are identical.
What can I be missing that would allow Ziost to see (and even map a network drive) everything on Mandalore, but then not vice versa? Mandalore is my main, newer PC, so I'm trying to keep it relativly clean and device free. My older PC is Ziost, so I have all my printers and external USB HDD on it.
I have included some pictures to help aide in the troubleshooting. It's almost 2am est, so I apologize if this is a little confusing. I'll be able to check back and respond from work tomorrow.
I had my computer at my home, connected to my home network. I moved to a Corporate apartment, which has a different network, and now I can't print to my printer, which I brought with me. I did set the new network as my 'home' network, and folowed instructions, but it does not seem to be working.
THe printer is a C6280 Photosmart, and is wireless enabled, but my new place doesn't have a router to attach to. Basically, I'd just like to connect the printer directly to my computer, since I will be the only one printing to it.
My computer is running Windows 7 build 7100
My Brother's computer is aswell
We are both connected wirelessly to our Router/Modem (Livebox), and we are both connected to the same Homegroup (i finally managed to get them show up in Explorer), and we are both connected to WORKGROUP, as is my Dad (Vista) and our other PC (XP, wired to livebox for printer sharing).
So, i was trying to get the "Play To" feature in WMP to work with my brother and my computer, but it doesnt seem to work.
a) On my computer i can't select "Allow Remote control of my player" though i can on my Bro"s
b) In "Media Streaming Options" and "Show devices on Local Network"(default i can't see my brothers computer, and on his he can't see mine. (This is obviously the problem), but if i select "Show devices on all networks" we can see each others computers.
For some reason though, we can see our mums Kodak Photo Frame thing, and "Media Programs on this PC..."
c) In WMP on both our computers we cant see each others computers in the HomeGroup even though all media is shared, so we have to go and look in Explorer "Homegroup" - "XXX-PC" - Music
I have searched but not found much with what I want to set up. I currently have a wireless connection to the internet for my PC and Laptop. What I would like to do is setup a private LAN with an old router to use but be able to keep the desktop connected to both WiFi and this LAN.
The only way I have managed to do so so far is by manually setting the IP address for the LAN (disable DHCP, change IP address etc) and assigning the LAN IP address manually to my desktop/laptop, leaving the gateway fields blank. I have noticed that doing this makes my network "Unknown" to Windows 7, which then forces it into Public mode, and disables Homegroup.
Is there a way for me to accomplish what I want?
Is pretty much how I want it to work. The desktop has two NICs, the laptop does not, so I realize the laptop would be a one-or-the-other scenario.
I created a VPN using Hamachi, it's listed as a second connection, I set it as a "Home" connection.
Problem is, the computer I'm trying to connect to is both on my local, and Hamachi network.
I decided, OK I'll just create a Homegroup on my Hamachi network!
I went to create it, but it appears it created a Homegroup within both networks?
I'm really confused here, I want to create a Homegroup on JUST the Hamachi network right now, but when I go to create one, it's listed on both.
Will I still be able to use Homegroups with Hamachi even outside the local server, because it's a VPN?
how to access my desktop that is on my Homegroup. When I try to access my desktop from my laptop I get asked to "Enter Network Password". The password I used for my router and my homegroup are both not working and I tried changing my homegroup password without avail.
Can I just completely turn off the homegroup password? On both computers I have opted to turn off password protection for the network but it doesn't seem to change anything.
BTW, I can access my laptop via my desktop but just not vice versa.
I have tried to find user guides but nothing seems to help. I can't even leave the homegroup on my laptop which I find weird.
After reformatting my laptops hard drive, it is unable to see the existing homegroup on my wireless network. Before the reformat, I was able to share files and printers using the existing homegroup on my main desktop computer. I have tried homegroup troubleshooter without success.
View 9 Replies View RelatedI have two computers, both use Windows 7, connected second computer to homegroup network but first one wouldn't connect to second. have now reloaded Windows on first computer due to other issues. Both computers see each other on network but neither will accept password to connect.
View 4 Replies View RelatedIs it just Libraries and Public and Personal sections? How are those different than mapping a new drive and setting permissions and/or passwords accordingly?
View 6 Replies View RelatedEnvironment:
Desktop : Windows 7 Ultimate
Laptop1 : Windows 7 Home
Laptop2 : Windows 7 Ultimate
Laptop1 can view and access the libraries on the Desktop. Laptop2 can see the libraries on the Desktop but can not access the folders. I'm not sure what to do here, I've triple checked that libraries are shared on the Home Group.
You have already checked all your settings and have done everything right. Your hard wired network connections work fine. When you go to wireless all your homegroup and network locations or most of them vanish with no resolution.Quick Solution: Make sure the time your router is keeping is the same as your network computers, including turning on Daylight Savings if applicable.Explanation:There are several threads on the internet about Windows 7 not finding workgroup or network printers or computers on wireless notebooks. This was after people painstakenly went through all the trouble shooters, turned off and restarted their firewalls and antivirus, rebooted and rebooted, reset and reset over and over again, checked all their settings and did everything right and still could not resolve their problem.
There is a likely resolution for this problem - at least it worked for me. It took me nearly a week to find this solution.Occasionally, when running the homegroup troubleshooter, I got the message that the time was not the same on all the network computers. I went around and checked all the computers and the time was the same - so why the message?However when I went to the router, I found that daylight savings was not turned on and the time the router was keeping was an hour different from everything else. Low and behold when I corrected the time on the router all the connection problems were resolved on the notebooks.
I have a wireless network setup comprising of a Windows 7 desktop and a Vista laptop,Everything worked fine but I suddenly have found that my computer sharing network setup is no longer working.When I try to access my Desktop PC from my laptop the Desktop Computer PC icon shows,but when I click on it I get a message,Windows cannot access Desktop Windows has sent the request to the DNS server and that name was unknown",When I try to access the laptop from my Desktops Windows7 (control panel>network sharing center) the Laptop icon no longer shows as it did previously.
View 1 Replies View Related5 month old Dell XPS 8500 Win 7 64 bit Pro as main computer connected by Wired Adapter, Upgraded Gateway 5632E also running Win 7 64 bit pro as second connected by Wireless. Both running Kapersky successfully. no network problems for 5 mo.
Both were successfully linked using homegroup. Had to take Gateway to a remote location to do a business demo. While there had to link to a local public WiFi. While connecting made mistake and left homegroup.
When Gateway returned to homebase a few days later it was fine, had no problems finding wireless but could not see or rejoin Dell machine homegroup. It would let me set up a new homegroup.
Went to Dell box and found 1) homegroup no longer existed, 2) router and network and wireless printing no longer found - Red X on the taskbar) even though internet was still working fine.
Took nearly a week of trying differernt fixes, on adapter- off adapter- different adapter reboot network, router, even updated router firmware (Yes I went through every ipconfig reset, renew, redecorate etc. I've used netsh functions to try to get evrything to reset. Changes services.msc settings per other posts. Finally in desperation, deleted every sub key in the registry related to network locational awareness and got the Dell to find the network, let me set it up as a "home" network and then even see the invitation to join the Gateway's homegroup.
Then I hit a wall- when I try to join- Win 7 says I can't join the homegroup because the network is not a "home network". Of course troubleshooting is useless and goes into an endless loop. Have searched in desperation for any way to make Win 7 return to a clean slate so it can sense that it really is on a home network without success. Applied the fix-it and hotpatch for when Win 7 gets stuck in public mode. No joy. Deleted the hide wizard subkey as suggested elsewhere. No Joy. Gut feeling says problem must lie in the NLA or peer networking somewhere but where?
Does anyone know of a method or set of steps (short of a clean reinstall of Win 7) to completely clear every thing the OS knows about my network and force it to acknowlege my network is a home network? Is there a registry hack that will clear the problem?
I know I could abandon the homegroup and do conventional file/print share but I am concerned that using that solution won't last as whatever is screwing up the homegroup could eventually screw regular sharing and then I'm back to reformating/reinstalling. I'm just about ready to join the Apple folks so I never have to work on Windows again.
3 days ago, access through my laptop on my home network to my main pc suddenly stopped working. i installed and changed nothing, as a result i wiped both the laptop and pc and reinstalled Win 7 Enterprise and Win 7 Ultimate respectively and i am still getting the " you do not have permission to access ---" i have taken ownershp, turned off password enabled sharing etc to fix this and nothing has worked. the only clue i have is that it may actually be an issue with the shared drive (storage) as viewing the shared drive over the network, the properties of the drive show up as 0 bytes/files.
View 3 Replies View RelatedRecently I discovered that the Homegroup feature is no longer working on my home network, which consists of one wired pc and one wireless laptop. Both machines running Windows 7 Ultimate 64 SP1. Both machines show the Homegroup status as "joined" in Network and Sharing Center, but neither machine is visible under "Homegroup" in My Computer. What I've tried (applies to both machines)...
- Disable Windows Firewall (no 3rd party firewalls installed)
- Leave Homegroup then rejoin
- Confirmed all needed services are running
- Confirmed IPv6 enabled
- Network Set to "Home"
- Disabled Wlan, using ethernet
Before this problem I had been using homegroup for over a year without incident. I should mention this problem seems to coincide with my upgrade to Service Pack 1, but I really don't want to jump to any conclusions at this point.
I installed Windows 7 on my laptop, and I also have a desktop running Windows 7. I am trying to connect my laptop to my homegroup with the password for my homegroup, but my desktop will not reveal it. Is there any other place that I can find it?
View 1 Replies View RelatedI have an issue which I can't find anything obvious on.I have 4 Windows 7 machines, 1 x W7 Pro, 2 x W7 Home Premium & 1 x W7 Starter all in the same Homegroup.The W7 Pro machine can see all the others under Homegroup in Windows ExplorerAll 3 of the others can see each other in the same way but the W7 Pro machine isn't listedThe 3 others can access the Shares on the W7 Pro Machine by going to Network rather than Homegroup in Windows Explorer.
View 1 Replies View RelatedI'd like to share a folder only for a certain user on a LAN. I'm on Windows 7-hp and the user is on XP-h. But when I go to assign permissions, the Location field only allows choices from my Windows 7 machine. If I put the XP user's name in directly, it flags that error.The Windows 7 user is an admin, and I've tried this with both an XP admin and user account.Surely there is some way to do this? Or alternatively, is there some way to do this via subnets?
View 2 Replies View RelatedI'm a desktop analyst and I need access to a remote PC on our network. The user has disabled remote access to his PC.I need to see files on that PC and I planned on using \domaincomputername c$ but it says "could not connect". That command works on other PC's here, but not the one in question.What can I do to enable access so that command works?There is staffing changes being made and I need to do this without the end user knowing.
View 9 Replies View RelatedHave 3 computers in my HOMEGROUP (2 wireless, 1 wired). When I try to connect to one of the other computers from any of my computers, a window pops up asking for a USER NAME and PASSWORD. I know my HOMEGROUP password but do not know the user name. How do I find it?
View 6 Replies View RelatedI also got Windows Server 2012 and 2008 from being a student for free. I have a few programs I would like to be able to run 24/7 and this seems like a good solution. The thing is I don't have a ton of space right now so I would like to only need 1 monitor/mouse/keyboard. I also would rather not use a KMV. At my school we are able to log onto our windows user account on any computer in the school by connecting through the local network. I would love to somehow set this up on my new server and regular PC but don't know what its called or how to research it. It seems very similar to a VPS or remote desktop but is not really either.
View 8 Replies View Relatedive lost my u/n,p/w for my network connection how can i retrieve it.
View 1 Replies View RelatedWhen using WinXP - I changed the location of the my documents folder to a shared location, which would automatically enable off-line files for the local my documents folder.
I'm trying to do the same thing with Windows 7. Does anyone know how to accomplish this?
I tried changing the location of the my docs folder in Windows 7 but a duplicate folder which cannot be deleted shows up.
How to disconnect a mobile user in wireless network?
View 4 Replies View RelatedI just built a Jerry-rigged light weight storage computer so I don't have to leave my dev/game comp/volcano on all the time anymore. I also bought a laptop recently as well. What I'd like to do is make the data (on two logical drives to be specific) completely accessible with full privileges to the laptop and this main PC however there are other users on the network that I don't want to share everything with (but still some).I can use PC Anywhere for some things but the end result I'm looking for is a handy couple of links on my desktop to the two raid drives and carry on as though they were still on my comp (and laptop now too), but also not include all users at the same time. (but also have the option to set up sharing for the folders they need access in too)Is this within the capacity of Windows 7? All computers have Win 7 and belong to the same home group.
View 19 Replies View Related
