I have a wired desktop and a wireless netbook. Both have 7 Ultimate. I set up HomeGroup on my desktop and my netbook can see & access my shared folders.
I also have a couple of printers. The one I want to be able to access is a wired HP Laserjet 4000. It's old, but built like a tank and has 64MB of RAM and a Jet Direct card. I have it plugged into a Cisco router. When I added the printer I chose "Add a network, wireless or Bluetooth printer". It locates the printer and assigns an IP address. As long as my desktop is on I can print to it from my netbook.
The problem is that I want to be able to print to the printer without having my desktop on like any small network. I should be able to since it has it's own IP address. It is on the correct port and everything in HomeGroup is working except printing while the desktop is off. I hesitate to install the massive Jet Direct software but I will if this will solve the problem.
I am very tired after staying up way too late doing a clean install of Ultimate on my desktop and reinstalling apps & arranging everything. I am thinking it has to be something simple I am overlooking ATM as I am not clear headed on 3 hours of sleep.
I had my computer at my home, connected to my home network. I moved to a Corporate apartment, which has a different network, and now I can't print to my printer, which I brought with me. I did set the new network as my 'home' network, and folowed instructions, but it does not seem to be working.
THe printer is a C6280 Photosmart, and is wireless enabled, but my new place doesn't have a router to attach to. Basically, I'd just like to connect the printer directly to my computer, since I will be the only one printing to it.
I have a homegroup set up with a desktop and a latop, 2 printers which are physically connected to the desktop.When i open homegroup to see what devices are connected the 2 pc`s and the 2 printers show up but when i go to print something through the homegroup from the laptop only 1 printer shows up to print from even though both printers show up in the homegroup?
We have an ASUS Zenbook U31F. We like it, but may have to return it because we cannot get it to print to our network printer on our HomeGroup. We have a Dell Studio 17 that prints to this computer with no problem.When we attempt to print to the printer (HP OfficeJet 6100 Series), the ASUS computer downloads a driver from the server and then issues the message "Operation failed with error 0x000003e3."
1) Updating the HP printer driver.I cannot do this. Windows reports that the printer driver is included in Windows 7 and I do not need to update it (and I cannot update it - the OS will not allow me to.)
2) Attaching the printer directly to the ASUS ZenBook ASUS ZenBook can print to the HP OfficeJet 6100 if it directly connected with a USB cable. This is not an acceptable solution: my wife needs to use the printer from anywhere in the house.
3) Registry Hack.I read about a registry hack to fool Windows into thinking that the printer is already connected. I did this and the printer appears in the Devices and Printer applet. Unfortunately, the first time I attempt to use the printer, the ASUS ZenBook downloads the printer driver and fails again.
ASUS and Best Buy have been completely useless. ASUS points the finger (I am not sure which finger) to HP. Best Buy wants me to pay an additional $70 for a support contract to get the computer that I bought from them to work.The server is a home-built gaming system built on a Gigabyte motherboard - Windows 7 Ultimate 64 bit, SP1, 6GB RAM, Intel i7 920 @ 2.66 GHz.The laptop is an ASUS ZenBook U31F running Windows 7 Pro 64 bit.
I personally hate the Homegroup. I would like to remove my laptop from it and was wondering if I do so will I be able to hook my computer up to my laptop?
I found it somewhat difficult to completely Unshare files and folders on my HomeGroup Network and still allow Printer sharing in Windows 7 (Home Premium).
Initial UnSharing still allowed files like those below to be viewed on other home network computers:
C:/Users/
{user x} (folder)
AppData (folder)
Default (folder
Public (folder)
desktop.ini (file)
Other computers on the home network could step through many levels of hiarchy in the AppData folder and appeared to have "Delete" access!!
To completely decouple the computers, I had to go through the following several different Sharing/Unsharing assignment locations, till I could completely break the linkage.
I would appreciate any clarifications or simplifications.
File UnShare Confusion on HomeGroup Network
There are several different Network Sharing/Protection assignment locations in Windows 7.
To prevent all sharing between computers on the Homegroup Network, but allow Printer Sharing:
1) Start->Control Panel ->Network and Sharing Center->Choose Homegroup and sharing options.
Uncheck sharing boxes that you don’t want to share. Save changes.
2) Start->Control Panel ->Network and Sharing Center->Choose Homegroup and sharing options->Change advanced sharing settings.
Click “Turn off Public folder sharing (people logged on to this computer can still access these folders)”.
3) Start->Control Panel ->Network and Sharing Center->Choose Homegroup and sharing options->Change advanced sharing settings.
Choose Media streaming options.
Click “Block All” button. Turn off. Click OK.
Anomaly Note: You have to close Control Panel and repeat all step 3 again for the change to take effect.
4) Open Windows Explorer.
a) Select “C:/”, select “Users” folder with single click, then click “Share with” in toolbar.
b) Select Advanced sharing.
Under Sharing tab, select Advanced Sharing. Uncheck box labeled “Share this folder”. Apply and close.
5) Open Windows Explorer.
Select “C:/Users/”, select all folders and files under "Users", then click “Share with” in toolbar, then click “Nobody”.
6) Verify success by going to other home network computer(s) and trying to access your files and folders. You should only be able to see there is a computer and not be able to see any folders of files.
There are three computers. One is a desktop connected through a LAN. The 2 laptops is connected through wireless from the modem from the desktop. Anyways, one of the laptops has the printer. My laptop can only see the desktop. The laptop connected to the printer can see both the my laptop and the desktop. Lastly the desktop cannot see anything. Sorry if this is confusing. Anyone know why it's not detected. I need to print something out.
Is it possible to set up a shared printer with one laptop running Windows 7 and the other laptop running Vista? I have tried setting all the required sharing settings on both units, but without success!
i recently notived that i cannot see my current logged in User on the network either in Homegroup or on the network itself. I can share other folders and files and see them but not my user..
I have been using windows 7 pto and xp pro on my laptop and desktop respectively. It was connected in same network from very beginning. I was in same workgroup. But as I reformatted my laptop cpl of days back I needed to connect it again with my xp desktop. since then I am not able to do so. Have been tried almost everything. I am in a same workgroup also have run the network wizard from xp. But nothing working. But just few hours ago i uninstalled few drivers (IPv6 related , not sure) while trying to connect from device manager.
I've been all over these boards finding little bits of help for the issue I am having, but no solution. I've tried pretty much everything.
I have TWO PC's on my network. Since I like Star Wars I named one Ziost, and the other Mandalore. I have turned on Network Discovery on both machines in the Advanced Sharing Settings. I have both machines also set to "Allow Windows to manage homegroup connections (recommended)".
I have looked through all the services recommended by others to make sure they are running. They are on both machines.
I have both machines joined to a homegroup, however Ziost was unable to create a homegroup. The error message simply just said the homegroup could not be created on that machine. So I created the homegroup on Mandalore. No problem, it created just fine and spit out a password. Ziost was able to see the homegroup and join it just fine with the password given out.
I can access Mandalores folders FROM Ziost. And on Ziost I can see Madalore in the Network in Windows Explorer.
However, on Mandalore, it says I'm in a homegroup, but there are no PC's in the homegroup. And Mandalore cannot see Ziost in the Network section of Windows Explorer.
I thought it could be the default firewall settings. But on both machines the firewall settings are identical.
What can I be missing that would allow Ziost to see (and even map a network drive) everything on Mandalore, but then not vice versa? Mandalore is my main, newer PC, so I'm trying to keep it relativly clean and device free. My older PC is Ziost, so I have all my printers and external USB HDD on it.
I have included some pictures to help aide in the troubleshooting. It's almost 2am est, so I apologize if this is a little confusing. I'll be able to check back and respond from work tomorrow.
We are both connected wirelessly to our Router/Modem (Livebox), and we are both connected to the same Homegroup (i finally managed to get them show up in Explorer), and we are both connected to WORKGROUP, as is my Dad (Vista) and our other PC (XP, wired to livebox for printer sharing).
So, i was trying to get the "Play To" feature in WMP to work with my brother and my computer, but it doesnt seem to work.
a) On my computer i can't select "Allow Remote control of my player" though i can on my Bro"s
b) In "Media Streaming Options" and "Show devices on Local Network"(default i can't see my brothers computer, and on his he can't see mine. (This is obviously the problem), but if i select "Show devices on all networks" we can see each others computers.
For some reason though, we can see our mums Kodak Photo Frame thing, and "Media Programs on this PC..."
c) In WMP on both our computers we cant see each others computers in the HomeGroup even though all media is shared, so we have to go and look in Explorer "Homegroup" - "XXX-PC" - Music
I have searched but not found much with what I want to set up. I currently have a wireless connection to the internet for my PC and Laptop. What I would like to do is setup a private LAN with an old router to use but be able to keep the desktop connected to both WiFi and this LAN.
The only way I have managed to do so so far is by manually setting the IP address for the LAN (disable DHCP, change IP address etc) and assigning the LAN IP address manually to my desktop/laptop, leaving the gateway fields blank. I have noticed that doing this makes my network "Unknown" to Windows 7, which then forces it into Public mode, and disables Homegroup.
Is there a way for me to accomplish what I want?
Is pretty much how I want it to work. The desktop has two NICs, the laptop does not, so I realize the laptop would be a one-or-the-other scenario.
how to access my desktop that is on my Homegroup. When I try to access my desktop from my laptop I get asked to "Enter Network Password". The password I used for my router and my homegroup are both not working and I tried changing my homegroup password without avail.
Can I just completely turn off the homegroup password? On both computers I have opted to turn off password protection for the network but it doesn't seem to change anything.
BTW, I can access my laptop via my desktop but just not vice versa.
I have tried to find user guides but nothing seems to help. I can't even leave the homegroup on my laptop which I find weird.
After reformatting my laptops hard drive, it is unable to see the existing homegroup on my wireless network. Before the reformat, I was able to share files and printers using the existing homegroup on my main desktop computer. I have tried homegroup troubleshooter without success.
I have two computers, both use Windows 7, connected second computer to homegroup network but first one wouldn't connect to second. have now reloaded Windows on first computer due to other issues. Both computers see each other on network but neither will accept password to connect.
Is it just Libraries and Public and Personal sections? How are those different than mapping a new drive and setting permissions and/or passwords accordingly?
So I checked on my network, just recently, and I saw some strange names connected. I saw BOYKA, KYLO-PC, RADULOVIC-PC, and my computer. I was freaking out, so I went to the DHCP Reservation on my routers setup and checked the devices connected. It was just my devices. But I still changed the password, but I was kind of reassured of the fact that it was probably just a program that accesses the network. But I googled all the names and no kind of software came up that may use these names displayed on the network, nor anyone else having this problem. I am worried that a people are accessing my network. Also, no one around my house has any of those names.Also I cannot create a homegroup because the user KYLO already has one on the network.
Environment: Desktop : Windows 7 Ultimate Laptop1 : Windows 7 Home Laptop2 : Windows 7 Ultimate
Laptop1 can view and access the libraries on the Desktop. Laptop2 can see the libraries on the Desktop but can not access the folders. I'm not sure what to do here, I've triple checked that libraries are shared on the Home Group.
You have already checked all your settings and have done everything right. Your hard wired network connections work fine. When you go to wireless all your homegroup and network locations or most of them vanish with no resolution.Quick Solution: Make sure the time your router is keeping is the same as your network computers, including turning on Daylight Savings if applicable.Explanation:There are several threads on the internet about Windows 7 not finding workgroup or network printers or computers on wireless notebooks. This was after people painstakenly went through all the trouble shooters, turned off and restarted their firewalls and antivirus, rebooted and rebooted, reset and reset over and over again, checked all their settings and did everything right and still could not resolve their problem.
There is a likely resolution for this problem - at least it worked for me. It took me nearly a week to find this solution.Occasionally, when running the homegroup troubleshooter, I got the message that the time was not the same on all the network computers. I went around and checked all the computers and the time was the same - so why the message?However when I went to the router, I found that daylight savings was not turned on and the time the router was keeping was an hour different from everything else. Low and behold when I corrected the time on the router all the connection problems were resolved on the notebooks.
I have a wireless network setup comprising of a Windows 7 desktop and a Vista laptop,Everything worked fine but I suddenly have found that my computer sharing network setup is no longer working.When I try to access my Desktop PC from my laptop the Desktop Computer PC icon shows,but when I click on it I get a message,Windows cannot access Desktop Windows has sent the request to the DNS server and that name was unknown",When I try to access the laptop from my Desktops Windows7 (control panel>network sharing center) the Laptop icon no longer shows as it did previously.
5 month old Dell XPS 8500 Win 7 64 bit Pro as main computer connected by Wired Adapter, Upgraded Gateway 5632E also running Win 7 64 bit pro as second connected by Wireless. Both running Kapersky successfully. no network problems for 5 mo.
Both were successfully linked using homegroup. Had to take Gateway to a remote location to do a business demo. While there had to link to a local public WiFi. While connecting made mistake and left homegroup.
When Gateway returned to homebase a few days later it was fine, had no problems finding wireless but could not see or rejoin Dell machine homegroup. It would let me set up a new homegroup.
Went to Dell box and found 1) homegroup no longer existed, 2) router and network and wireless printing no longer found - Red X on the taskbar) even though internet was still working fine.
Took nearly a week of trying differernt fixes, on adapter- off adapter- different adapter reboot network, router, even updated router firmware (Yes I went through every ipconfig reset, renew, redecorate etc. I've used netsh functions to try to get evrything to reset. Changes services.msc settings per other posts. Finally in desperation, deleted every sub key in the registry related to network locational awareness and got the Dell to find the network, let me set it up as a "home" network and then even see the invitation to join the Gateway's homegroup.
Then I hit a wall- when I try to join- Win 7 says I can't join the homegroup because the network is not a "home network". Of course troubleshooting is useless and goes into an endless loop. Have searched in desperation for any way to make Win 7 return to a clean slate so it can sense that it really is on a home network without success. Applied the fix-it and hotpatch for when Win 7 gets stuck in public mode. No joy. Deleted the hide wizard subkey as suggested elsewhere. No Joy. Gut feeling says problem must lie in the NLA or peer networking somewhere but where?
Does anyone know of a method or set of steps (short of a clean reinstall of Win 7) to completely clear every thing the OS knows about my network and force it to acknowlege my network is a home network? Is there a registry hack that will clear the problem?
I know I could abandon the homegroup and do conventional file/print share but I am concerned that using that solution won't last as whatever is screwing up the homegroup could eventually screw regular sharing and then I'm back to reformating/reinstalling. I'm just about ready to join the Apple folks so I never have to work on Windows again.
3 days ago, access through my laptop on my home network to my main pc suddenly stopped working. i installed and changed nothing, as a result i wiped both the laptop and pc and reinstalled Win 7 Enterprise and Win 7 Ultimate respectively and i am still getting the " you do not have permission to access ---" i have taken ownershp, turned off password enabled sharing etc to fix this and nothing has worked. the only clue i have is that it may actually be an issue with the shared drive (storage) as viewing the shared drive over the network, the properties of the drive show up as 0 bytes/files.
Recently I discovered that the Homegroup feature is no longer working on my home network, which consists of one wired pc and one wireless laptop. Both machines running Windows 7 Ultimate 64 SP1. Both machines show the Homegroup status as "joined" in Network and Sharing Center, but neither machine is visible under "Homegroup" in My Computer. What I've tried (applies to both machines)...
- Disable Windows Firewall (no 3rd party firewalls installed) - Leave Homegroup then rejoin - Confirmed all needed services are running - Confirmed IPv6 enabled - Network Set to "Home" - Disabled Wlan, using ethernet
Before this problem I had been using homegroup for over a year without incident. I should mention this problem seems to coincide with my upgrade to Service Pack 1, but I really don't want to jump to any conclusions at this point.
I installed Windows 7 on my laptop, and I also have a desktop running Windows 7. I am trying to connect my laptop to my homegroup with the password for my homegroup, but my desktop will not reveal it. Is there any other place that I can find it?
New windows 7 Home Premium desktop that can print when the printer is directly connected but can't print when the printer is connected to an XP pro pc. It can see it but we're getting a "driver cannot be found on the network" flag.
We have just added our first Windows 7 pc to our XP network. I would like to connect to the Windows 7 PC to a shared "Epson lq-590" printer on one of the XP machines.According to the Epson website the only drivers available for this printer are through Windows 7 update in the "add a printer wizard". If the printer is directly attached to the Windows 7 PC the driver installation via "add a printer wizard" works without a hitch. When trying to add the printer over the network the Windows 7 "add a printer wizard" cannot find the driver for the printe
I have an issue which I can't find anything obvious on.I have 4 Windows 7 machines, 1 x W7 Pro, 2 x W7 Home Premium & 1 x W7 Starter all in the same Homegroup.The W7 Pro machine can see all the others under Homegroup in Windows ExplorerAll 3 of the others can see each other in the same way but the W7 Pro machine isn't listedThe 3 others can access the Shares on the W7 Pro Machine by going to Network rather than Homegroup in Windows Explorer.
Untill yesterday my homegroup was working just fine. Two laptops / home premium / windows 7.Now when I try to access it I am prompted for a Network user name and password, the same promt giving details of my domain. This is not my homegroup password, I know where and how to find / use it. I have renamed pc's tried setting up homegroup again etc etc. Incidently I cant change the share options on any of my folders now, they are all locked to 'Nobody'.Can anyone help as it appears to have support from Microsoft for their product I'll have to pay pardon my igronance but if I sold a product with constant updates I wont charge for the support.
