Cannot Connect Printer To New Network Or Homegroup
Oct 9, 2011
I had my computer at my home, connected to my home network. I moved to a Corporate apartment, which has a different network, and now I can't print to my printer, which I brought with me. I did set the new network as my 'home' network, and folowed instructions, but it does not seem to be working.
THe printer is a C6280 Photosmart, and is wireless enabled, but my new place doesn't have a router to attach to. Basically, I'd just like to connect the printer directly to my computer, since I will be the only one printing to it.
View 5 Replies
ADVERTISEMENT
Sep 20, 2011
I have been using windows 7 pto and xp pro on my laptop and desktop respectively. It was connected in same network from very beginning. I was in same workgroup. But as I reformatted my laptop cpl of days back I needed to connect it again with my xp desktop. since then I am not able to do so. Have been tried almost everything. I am in a same workgroup also have run the network wizard from xp. But nothing working. But just few hours ago i uninstalled few drivers (IPv6 related , not sure) while trying to connect from device manager.
View 1 Replies
View Related
Nov 10, 2009
I have a wired desktop and a wireless netbook. Both have 7 Ultimate. I set up HomeGroup on my desktop and my netbook can see & access my shared folders.
I also have a couple of printers. The one I want to be able to access is a wired HP Laserjet 4000. It's old, but built like a tank and has 64MB of RAM and a Jet Direct card. I have it plugged into a Cisco router. When I added the printer I chose "Add a network, wireless or Bluetooth printer". It locates the printer and assigns an IP address. As long as my desktop is on I can print to it from my netbook.
The problem is that I want to be able to print to the printer without having my desktop on like any small network. I should be able to since it has it's own IP address. It is on the correct port and everything in HomeGroup is working except printing while the desktop is off. I hesitate to install the massive Jet Direct software but I will if this will solve the problem.
I am very tired after staying up way too late doing a clean install of Ultimate on my desktop and reinstalling apps & arranging everything. I am thinking it has to be something simple I am overlooking ATM as I am not clear headed on 3 hours of sleep.
View 5 Replies
View Related
Jan 29, 2011
Originally, i had one network running under a Dir-665 router where all the computers under that could connect to the printer (HPPrintPC) on the computer (which is connected to the router.After moving to uverse, i have two networks, the one above and now the 2wire network due to uverse.The computer with the printer is connected to the 2wire network, and all the other computers are connected to the Dir-655 network. The computers on the Dir-655 Network can't connect to the printer on the 2wire network but can ping the computer it is connected to.
View 3 Replies
View Related
Sep 9, 2011
I bought a HP LASER JET 1007. which is a USB 2.0 printer. i have two pc both are connected via a switch. There has a modem connected also in the switch which have a usb and a ethernet port. ethernet port is used to connect the modem to switch.. That means in my network i have 2pc and a modem connected. is there has any procedure to connect my printer to this network. I dont want to connect the printer in a pc, cz to access the printer i have to power on the pc always.
View 6 Replies
View Related
Sep 21, 2011
I have installed a wireless Epson Workforce 610 printer (it is fast!) but if it is not turned on when I boot I get a notification message "Could not reconnect all network drives".Is there a setting which will prevent this from displaying? One other computer which has the same drivers does not show this message, so it is puzzling.I disabled all the Epson drivers in Startup but that did not help.
View 3 Replies
View Related
Jul 29, 2011
I have a laptop, HTPC, and a desktop, all connected to my internet wirelessly. All of the systems were connected to the homegroup perfectly last night, but then I started having problem this morning. The HTPC was connected to the homegroup, but unable to detect any of the computers. Same with the rest of them. So I left the homegroup from the HTPC thinking I could just reconnect. Big mistake. After that the only option that was available to me was to "create a new group". After many restarts and settings, I decided to create a new homegroup. I then left the original homegroup from my laptop, so that I could join the new homegroup, but alas, the same thing happens, I could not see the old homegroup from the desktop, or the new homegroup from the HTPC! The only option available to to create another new homegroup! I did the same thing again with my desktop, and now all three machines each on its own homegroup.
View 3 Replies
View Related
Aug 12, 2010
i have three computers. 2 laptops and one desktop when i go on network ansharing they all say that they are connected to homegroup. whenever i try to access any of the files on any of the computers nothing shows up all i get is a message saying not connected check that homegroup is active and that computers are not off/asleepany.
View 1 Replies
View Related
Aug 15, 2011
My netbook and main PCs both have windows 7 64 bit. Both have sharing enabled.Both have the exact same setup in networking. Both are set to home. Both have the right password.I have disabled all firewalls.I have synchronized the clocks.I updated windows.I have enabled and disabled ipv6 and attempted ipv4.Machines have had their homegroups disabled and re-enabled.They have been rebooted numerous times.I have had the propper services enabled.The netbook can see and access files on the PC but even though the PC sees the netbook as a media device, it cannot see it as a computer and cannot see it in the homegroup, thus it cannot access any files.
View 4 Replies
View Related
Jun 27, 2012
I have a Desktop computer with Windows 7 Ultimate 64 bit and a laptop with Windows 7 Ultimate 32 bit
The Laptop can see the desktop, files and printer But the Desktop cannot see the Homegroup. The desktop does not have the option to allow remote desktop connections, I don't know if that is connected to the same issue or not.
When I try to modify the Homegroup on the desktop, I get the error message mentioned above. this computer can't connect to homegroup
View 1 Replies
View Related
Aug 28, 2012
I have a 2 computer setup both have successfully joined the homegroup I created. From comp A, I can access everything on comp B but comp B cannot access anything on comp A. I can see what's on comp A but if I try to go there it asks for credentials. Also tied to this (I assume), when I try and access the printer on comp A, the "Install Printer" button literally does nothing (screenshot).
I have no idea where to begin with this problem. The homegroup advanced settings are set up to share files and printers. I've allowed File Sharing in Windows Firewall on both computers. I've completely left the homegroup and made a new one.
View 1 Replies
View Related
Jun 16, 2012
I have 2 Windows 7 computers one is a Hp Laptop and another is a Compaq Desktop I have been dealing with this problem for quite awhile and each time i go to try and correct the trouble i get unbelievably frustrated as in the end i never seem to make any progress. I have attempted to create a home group from both machines and when i do create a homegroup the other IS able to see the other but when i attempt to join from either one to the one that has created it always yields an error stating that "window cannot setup homegroup on this computer" The desktop is hardwired to my Dlink router and the laptop is connected wirelessly.
View 11 Replies
View Related
Mar 19, 2011
I'm new to windows 7 and i want some help. I have one apacher 460 media player which i would like to connect on my homegroup so that i can stream movies from my pc.
View 1 Replies
View Related
Mar 7, 2012
I have a laptop with windows7 and i want to connect it to network and share printer on a computer with windows XP. It doesn't detect the computer and even when i have changed sharing settings on laptop.
View 4 Replies
View Related
Nov 15, 2011
i have 4 networked computers (all connected through ethernet cables) They used to talk to each other fine. Now one (Call it KPC) is able to access all of the computers but none can access it. Another computer (RPC) says that it does not have permission to access it, even though i have all my file sharing turned on.
It used to ask me for a password and even though i would enter the correct password (the same on all computers) it said "logon failed: wrong username or bad password".
Also I have added KPC to the RPC homegroup using the password and it just doesnt show up on the RPC homegroup page. I really NEED RPC to be able to access KPC's everything (documents, printers etc) the rest arent a big deal at all. What happened and why did it just stop working??
View 1 Replies
View Related
Jun 25, 2012
I have a homegroup set up with a desktop and a latop, 2 printers which are physically connected to the desktop.When i open homegroup to see what devices are connected the 2 pc`s and the 2 printers show up but when i go to print something through the homegroup from the laptop only 1 printer shows up to print from even though both printers show up in the homegroup?
View 10 Replies
View Related
Apr 30, 2012
We have an ASUS Zenbook U31F. We like it, but may have to return it because we cannot get it to print to our network printer on our HomeGroup. We have a Dell Studio 17 that prints to this computer with no problem.When we attempt to print to the printer (HP OfficeJet 6100 Series), the ASUS computer downloads a driver from the server and then issues the message "Operation failed with error 0x000003e3."
1) Updating the HP printer driver.I cannot do this. Windows reports that the printer driver is included in Windows 7 and I do not need to update it (and I cannot update it - the OS will not allow me to.)
2) Attaching the printer directly to the ASUS ZenBook ASUS ZenBook can print to the HP OfficeJet 6100 if it directly connected with a USB cable. This is not an acceptable solution: my wife needs to use the printer from anywhere in the house.
3) Registry Hack.I read about a registry hack to fool Windows into thinking that the printer is already connected. I did this and the printer appears in the Devices and Printer applet. Unfortunately, the first time I attempt to use the printer, the ASUS ZenBook downloads the printer driver and fails again.
ASUS and Best Buy have been completely useless. ASUS points the finger (I am not sure which finger) to HP. Best Buy wants me to pay an additional $70 for a support contract to get the computer that I bought from them to work.The server is a home-built gaming system built on a Gigabyte motherboard - Windows 7 Ultimate 64 bit, SP1, 6GB RAM, Intel i7 920 @ 2.66 GHz.The laptop is an ASUS ZenBook U31F running Windows 7 Pro 64 bit.
View 2 Replies
View Related
Jul 19, 2012
I personally hate the Homegroup. I would like to remove my laptop from it and was wondering if I do so will I be able to hook my computer up to my laptop?
View 5 Replies
View Related
Oct 3, 2012
Can I still print to the wireless printer if I disconnect the Homegroup? I do not wish to share files and see no point in joining a Homegroup.
Would removing the Homegroup cause internet connection problems?
View 3 Replies
View Related
Dec 1, 2009
I found it somewhat difficult to completely Unshare files and folders on my HomeGroup Network and still allow Printer sharing in Windows 7 (Home Premium).
Initial UnSharing still allowed files like those below to be viewed on other home network computers:
C:/Users/
{user x} (folder)
AppData (folder)
Default (folder
Public (folder)
desktop.ini (file)
Other computers on the home network could step through many levels of hiarchy in the AppData folder and appeared to have "Delete" access!!
To completely decouple the computers, I had to go through the following several different Sharing/Unsharing assignment locations, till I could completely break the linkage.
I would appreciate any clarifications or simplifications.
File UnShare Confusion on HomeGroup Network
There are several different Network Sharing/Protection assignment locations in Windows 7.
To prevent all sharing between computers on the Homegroup Network, but allow Printer Sharing:
1) Start->Control Panel ->Network and Sharing Center->Choose Homegroup and sharing options.
Uncheck sharing boxes that you don’t want to share. Save changes.
2) Start->Control Panel ->Network and Sharing Center->Choose Homegroup and sharing options->Change advanced sharing settings.
Click “Turn off Public folder sharing (people logged on to this computer can still access these folders)”.
3) Start->Control Panel ->Network and Sharing Center->Choose Homegroup and sharing options->Change advanced sharing settings.
Choose Media streaming options.
Click “Block All” button. Turn off. Click OK.
Anomaly Note: You have to close Control Panel and repeat all step 3 again for the change to take effect.
4) Open Windows Explorer.
a) Select “C:/”, select “Users” folder with single click, then click “Share with” in toolbar.
b) Select Advanced sharing.
Under Sharing tab, select Advanced Sharing. Uncheck box labeled “Share this folder”. Apply and close.
5) Open Windows Explorer.
Select “C:/Users/”, select all folders and files under "Users", then click “Share with” in toolbar, then click “Nobody”.
6) Verify success by going to other home network computer(s) and trying to access your files and folders. You should only be able to see there is a computer and not be able to see any folders of files.
View 1 Replies
View Related
Nov 29, 2009
There are three computers. One is a desktop connected through a LAN. The 2 laptops is connected through wireless from the modem from the desktop. Anyways, one of the laptops has the printer. My laptop can only see the desktop. The laptop connected to the printer can see both the my laptop and the desktop. Lastly the desktop cannot see anything. Sorry if this is confusing. Anyone know why it's not detected. I need to print something out.
View 3 Replies
View Related
Dec 30, 2011
Is it possible to set up a shared printer with one laptop running Windows 7 and the other laptop running Vista? I have tried setting all the required sharing settings on both units, but without success!
View 4 Replies
View Related
Sep 6, 2011
i recently notived that i cannot see my current logged in User on the network either in Homegroup or on the network itself. I can share other folders and files and see them but not my user..
View 2 Replies
View Related
Jul 8, 2011
I have 2 computers on my home network. My desktop is running Windows 7 ultimate 32 bit and I have a kodak 5500 Aio connected to it. I also have a laptop that's running windows 7 home premium 64 bit that connects wireless. I was able to print until today and now I can't print from the laptop. I can see the printer in the add printer window but comes up with cannot connect with error of 0x0000000d
View 2 Replies
View Related
Jul 15, 2009
I've been all over these boards finding little bits of help for the issue I am having, but no solution. I've tried pretty much everything.
I have TWO PC's on my network. Since I like Star Wars I named one Ziost, and the other Mandalore. I have turned on Network Discovery on both machines in the Advanced Sharing Settings. I have both machines also set to "Allow Windows to manage homegroup connections (recommended)".
I have looked through all the services recommended by others to make sure they are running. They are on both machines.
I have both machines joined to a homegroup, however Ziost was unable to create a homegroup. The error message simply just said the homegroup could not be created on that machine. So I created the homegroup on Mandalore. No problem, it created just fine and spit out a password. Ziost was able to see the homegroup and join it just fine with the password given out.
I can access Mandalores folders FROM Ziost. And on Ziost I can see Madalore in the Network in Windows Explorer.
However, on Mandalore, it says I'm in a homegroup, but there are no PC's in the homegroup. And Mandalore cannot see Ziost in the Network section of Windows Explorer.
I thought it could be the default firewall settings. But on both machines the firewall settings are identical.
What can I be missing that would allow Ziost to see (and even map a network drive) everything on Mandalore, but then not vice versa? Mandalore is my main, newer PC, so I'm trying to keep it relativly clean and device free. My older PC is Ziost, so I have all my printers and external USB HDD on it.
I have included some pictures to help aide in the troubleshooting. It's almost 2am est, so I apologize if this is a little confusing. I'll be able to check back and respond from work tomorrow.
View 2 Replies
View Related
Sep 2, 2009
My computer is running Windows 7 build 7100
My Brother's computer is aswell
We are both connected wirelessly to our Router/Modem (Livebox), and we are both connected to the same Homegroup (i finally managed to get them show up in Explorer), and we are both connected to WORKGROUP, as is my Dad (Vista) and our other PC (XP, wired to livebox for printer sharing).
So, i was trying to get the "Play To" feature in WMP to work with my brother and my computer, but it doesnt seem to work.
a) On my computer i can't select "Allow Remote control of my player" though i can on my Bro"s
b) In "Media Streaming Options" and "Show devices on Local Network"(default i can't see my brothers computer, and on his he can't see mine. (This is obviously the problem), but if i select "Show devices on all networks" we can see each others computers.
For some reason though, we can see our mums Kodak Photo Frame thing, and "Media Programs on this PC..."
c) In WMP on both our computers we cant see each others computers in the HomeGroup even though all media is shared, so we have to go and look in Explorer "Homegroup" - "XXX-PC" - Music
View 9 Replies
View Related
Nov 4, 2009
I have searched but not found much with what I want to set up. I currently have a wireless connection to the internet for my PC and Laptop. What I would like to do is setup a private LAN with an old router to use but be able to keep the desktop connected to both WiFi and this LAN.
The only way I have managed to do so so far is by manually setting the IP address for the LAN (disable DHCP, change IP address etc) and assigning the LAN IP address manually to my desktop/laptop, leaving the gateway fields blank. I have noticed that doing this makes my network "Unknown" to Windows 7, which then forces it into Public mode, and disables Homegroup.
Is there a way for me to accomplish what I want?
Is pretty much how I want it to work. The desktop has two NICs, the laptop does not, so I realize the laptop would be a one-or-the-other scenario.
View 3 Replies
View Related
Mar 9, 2009
I created a VPN using Hamachi, it's listed as a second connection, I set it as a "Home" connection.
Problem is, the computer I'm trying to connect to is both on my local, and Hamachi network.
I decided, OK I'll just create a Homegroup on my Hamachi network!
I went to create it, but it appears it created a Homegroup within both networks?
I'm really confused here, I want to create a Homegroup on JUST the Hamachi network right now, but when I go to create one, it's listed on both.
Will I still be able to use Homegroups with Hamachi even outside the local server, because it's a VPN?
View 1 Replies
View Related
Jan 17, 2012
how to access my desktop that is on my Homegroup. When I try to access my desktop from my laptop I get asked to "Enter Network Password". The password I used for my router and my homegroup are both not working and I tried changing my homegroup password without avail.
Can I just completely turn off the homegroup password? On both computers I have opted to turn off password protection for the network but it doesn't seem to change anything.
BTW, I can access my laptop via my desktop but just not vice versa.
I have tried to find user guides but nothing seems to help. I can't even leave the homegroup on my laptop which I find weird.
View 12 Replies
View Related
Dec 24, 2011
After reformatting my laptops hard drive, it is unable to see the existing homegroup on my wireless network. Before the reformat, I was able to share files and printers using the existing homegroup on my main desktop computer. I have tried homegroup troubleshooter without success.
View 9 Replies
View Related
Mar 17, 2012
I have two computers, both use Windows 7, connected second computer to homegroup network but first one wouldn't connect to second. have now reloaded Windows on first computer due to other issues. Both computers see each other on network but neither will accept password to connect.
View 4 Replies
View Related