I have installed a wireless Epson Workforce 610 printer (it is fast!) but if it is not turned on when I boot I get a notification message "Could not reconnect all network drives".Is there a setting which will prevent this from displaying? One other computer which has the same drivers does not show this message, so it is puzzling.I disabled all the Epson drivers in Startup but that did not help.
View 3 RepliesOriginally, i had one network running under a Dir-665 router where all the computers under that could connect to the printer (HPPrintPC) on the computer (which is connected to the router.After moving to uverse, i have two networks, the one above and now the 2wire network due to uverse.The computer with the printer is connected to the 2wire network, and all the other computers are connected to the Dir-655 network. The computers on the Dir-655 Network can't connect to the printer on the 2wire network but can ping the computer it is connected to.
View 3 Replies View RelatedI bought a HP LASER JET 1007. which is a USB 2.0 printer. i have two pc both are connected via a switch. There has a modem connected also in the switch which have a usb and a ethernet port. ethernet port is used to connect the modem to switch.. That means in my network i have 2pc and a modem connected. is there has any procedure to connect my printer to this network. I dont want to connect the printer in a pc, cz to access the printer i have to power on the pc always.
View 6 Replies View RelatedI had my computer at my home, connected to my home network. I moved to a Corporate apartment, which has a different network, and now I can't print to my printer, which I brought with me. I did set the new network as my 'home' network, and folowed instructions, but it does not seem to be working.
THe printer is a C6280 Photosmart, and is wireless enabled, but my new place doesn't have a router to attach to. Basically, I'd just like to connect the printer directly to my computer, since I will be the only one printing to it.
I have a laptop with windows7 and i want to connect it to network and share printer on a computer with windows XP. It doesn't detect the computer and even when i have changed sharing settings on laptop.
View 4 Replies View RelatedI have 2 computers on my home network. My desktop is running Windows 7 ultimate 32 bit and I have a kodak 5500 Aio connected to it. I also have a laptop that's running windows 7 home premium 64 bit that connects wireless. I was able to print until today and now I can't print from the laptop. I can see the printer in the add printer window but comes up with cannot connect with error of 0x0000000d
View 2 Replies View RelatedCan anyone advise how I would go about fixing this. I am trying to connect to a network (I have a dell running on windows 7) and it keeps telling me that windows is unable to connect to the network-this is before I can even enter the security key. I know it is not a problem with the wireless because other people are able to connect to it fine.
View 2 Replies View RelatedI've got Win7 home premium x64. When I boot it says near the clock can't reconnect or can't connect to all network drives. I don't have any nor have I ever.
View 9 Replies View RelatedI have a Gigabyte 870-UD3 motherboard and I also have two hard drives, One is a TB and the other is 500GBs, The TB one is the primary one at the minute and I was wondering does it matter what way my hard drives are connected to the motherboard? Will one slot make it slower or faster?
View 5 Replies View RelatedI bought a 2TB external hard drive (Western Digital) earlier this year on sale and for Christmas I got another one for redundancy (a back-up in case the one I have fails). My problem is that while my computer (a Dell Desktop purchased last year) will get a bit glitchy in picking up one (sometimes it won't recognize it but this is seldom), it will never recognize both at the same time. As a result, I have to add files (pictures, music, etc) to my external hard drives one at a time. I've checked all the USB ports with other hardware, and they all work - the only thing I can think of is that this is a Windows issue. I have both external hard drives assigned to different drive paths, so it's not a matter of that.
View 4 Replies View Relatedi have a all in one epson stylus cx3900 printer will not work on windows 7 the drives are to old keep in mind this printer is only 2 to 3 years old i had it on my old computer and it was xp windows i have looked on the Microsoft web site and thay say there are no drives update for the printer anyone got any clues just wondered before i go buy new printer?
View 9 Replies View Relatedwhen i check which printer drivers are available on mt laptop, i can see that the drivers are there. However when i try to connect a netowrk printer, i get a msg saying the drivers are not available on the network. how can i tell windows to use the local drivers for the network printer?
View 4 Replies View RelatedI have 2 windows 7 computers in my network and I have a Dlink DNS-323 mass storage devide. my wifes computer has no problem accessing the external hard drive. On my computer I have the red X on both drives in the DNS-323. If i try to access this drive from an application such as Itunes, it tells that the path is invalid or something close to that. I then have to go to Windows Explorer and double click on both drives.
View 7 Replies View RelatedI have two networked computers using Windows 7 Ultimate.Both are part of WORKGROUP.Computer 1 has 3 internal drives, one of which is shared and can be accessed by Computer 2; and 1 external drive, also shared and also accessible by Computer 2.Computer 2 has three internal drives, two of which are shared. Permisions are set for Everyone to have full access to both drives.Yet computer 1 can only connect to one of the shared drives.When I try to Map the errant drive from Computer 1, I constantly get the stupid message that I don't have permission.
View 5 Replies View Relatedok i have a home network set up on 2 pcs with win 7 64bit
i have set up shared drives on both pcs ,, i have set the permisions on the shared drives so that everyone can do whatever they want change files delete files ect
so i expect to be able from one pc to cut files and paste to the other but i cant ,,, i cant even copy from one pc to the other unless i do it from the pc that is going to have the file added
I have two desktop PCs running Windows 7 Ultimate, a HP laptop running Windows XP SP3 and a Network Storage Device (Dlink DNS 343 with 3 Raid Volumes) networked via a D Link DIR-635 wireless Router. Both PCs and the DNS-343 are hard-wired to the router: the Laptop connects wirelessly.
Since installing Windows 7 on the PCs, I am unable to map the network drives on the DNS-343 even though all network components are visible and functioing in Windows Network Map, Pure Networks Map and Norton Internet Securities 2010 Network Map(with Full Trust).
This was not previously a problem with one PC running XP SP3 and the other Vista SP1. The DNS-343 does NOT appear as a network device in Windows 7 Windows Explorer: nor does the Laptop, on either PC. The laptop running XP is able to Map network drives as before and access shared folders on both PCs.
To date I have reset the factory defaults on the router and DNS-343;disabled all firewalls and minimised security controls (eg: MAC filtering) as far as I am able. I can ping each device successfully. The problem is I cannot "see" the DNS-343 in Windows 7 Windows Explorer to map the drives.
I have 3 Windows 7 Ultimate computers hooked up to a ATT FastAccess DSL line. They are in a Homegroup. I also have 2 Windows xp Pro computers that are connected to same the FastAccess DSL. From the XP can see all Windows 7/xp computers by browsing the "entire network".
On one of the Windows 7 computers is assigned to Susan. Susan Windows 7 PC has a 4 Tb external hard drive attached to it. I created a folder on the 4 tb external HD called Frank and shared it.
What I am needing to do is on Frank's Windows XP Pro computer is to Map Network Drive and Map to the "frank" folder and have it reconnect at logon. Problem is when it goes to map the folder it wants an id/password to connect to the "frank folder". I can enter the credentials that Susan uses on her PC and the drive will map just fine but I need it to map without asking for any credentials. I already tried "reconnect at logon" and it shows in explorer but wants a password to reconnect.
I was thinking if I create a Frank user id and password on Susan's PC then use those credentials when frank tries to connect to the folder "frank" from his XP Pro PC then that might work. I am not sure.
New windows 7 Home Premium desktop that can print when the printer is directly connected but can't print when the printer is connected to an XP pro pc. It can see it but we're getting a "driver cannot be found on the network" flag.
View 9 Replies View RelatedMy problem is with all the users files on the file server don't all show-up. Some stay as 'My Documents'.
I believe there is something to delete within the folders to make it show the names properly, but I can't remember.
We have this recurring issue where some mapped network drives disappear from 'my computer'. They usually appear after 1 or 2 reboots, but having to go through this each time is a bit annoying.Right now all our client computers are running windows 7 pro on a 2008 domain server. We've been having this issue from when we had the 2003 server and its still happening every now and then
View 2 Replies View RelatedI have speed issues when working with files on the LAN network. They open and save much much slower than XP. On the other hand the ADSL internet connection is fine and running at full speed. What is the problem? The computer is brand new and with fresh install of Windows 7 x64.My other problem is with mapped network drives. On the second computer, which is running fresh install of Windows 7 too, we have mapped network drives which are accessable on the whole network. The problem is that every time we start that PC with the mapped network drives Windows says "Could not reconnect all network drives" and all computers on the network show them with red "x" on the icons. I want them to automatically open at startup.
View 2 Replies View RelatedWindows Server 2008 R2Windows 7 32 BitI have a Windows 7 Enterprise box that when started will only create 2 of 3 mapped network drives. This does not happen every time either, just about 2-3 days of the 5 day work week. 2 of the drives are mapped via a script, while the 1 drive that is the problem child is set through the Properties-->Profile-->Home Folder of the user on our AD box. We have set the drop down letter to H and verified the path. It is correct, as it works some days.
View 8 Replies View RelatedA while back I shared all my main pc drives on my newtork by right clicking on the drive in my computer then clicking the share tab. I then later un-shared them by unclicking the tab but all the computers could see the drives that had been previously shared from my main computer. They could even access them even though they had been unshared. I then later reinstalled windows7 on my main computer but the drives are still visible and accessable from computers on my network.
View 1 Replies View RelatedI'v got a problem with mapped network drives.
My configuration:
i have my pc with Windows 7 beta, anda onther old pc with windows xp. I mapped a shared folder on the xp computer ads network drive.
The problem is that even if I save my credentials, the network drive don't reconnect at logon and I have to reenter my credential again.
I have the same username on both pc, on the xp one (where are the shared folders) I have also set a password, on mine not.
I've got a ThinkPad x220 here and randomly started having issues accessing the network (mapped drives and printers). The computer can still access our Intranet (Sharepoint) and Exchange Server (Outlook says connected and we can send/receive)I tried disconnecting the drives and reconnecting, but none of the servers were showing up in the list. I then checked to see if network discovery and file sharing were turned on... they were. Tried manually going to a network drive (i.e. the public drive
View 1 Replies View RelatedI want to know if there is anyway to find out if a network shared drive (showing within 'My Computer') is manually connected/mapped. (btw we are using a AD - GPO & Desktop Authority)I don't want to disconnect all the drives and then log the user off as i want to see if there is a simpler way to check this.
View 1 Replies View RelatedI have a situation where I have folks logging into the domain with their respected credentials. I setup the first users with everything they needed and then realized I would need to imitate this over 4-5 other users on the same machine. Is there a way to do this more effectively rather than by hand?
I want all users to have the same network drives (I have 6 different locations) and I want them to have the same desktop icons for accessing content.
I have a problem with mapped network drives disconnecting.
I run Windows 7 Pro connecting to Win Server 2003. Reboot and the drives are there. After a while a red cross appears against them in Explorer. I can usually see the contents, but running a program that requires those resources fails.
The only way I can reconnect is to reboot, but then the red cross appears again after a while.
I've updated the LAN driver and even tried setting the registry key MaxNonpagedMemoryUsage to 0xFFFFFFFF as recommended in the only comment on the subject I've been able to find.
I'd really appreciate some help here as I don't want to go back to XP!
I'm using XBMC on an HTPC, that connects to a server hosting all the media files.
Both machines run 7 and I'd love to use Libraries to aggregate movies, TV shows, music, pictures, etc. coming from different folders. Unfortunately, from within XBMC libraries are unreachable.
I thought about mapping them to a network drive, but the actual libraries seem to be a *file* and not a *place* (you can check them by creating a shortcut to a library and looking at its properties).
Anything I've missed?
got a new laptop with windows 7. Joined my home wireless network no problem except that after a few days(all was fine at first) when booting up, the NAS drive plugged into the router shows as disconnected in windows explorer. In fact a bubble pops up in the system tray to say some drives cannot be connected (my wireless network printer has a card reader that appears as a drive). Occasionally I can reconnect the NAS and the card reader by clicking on them in explorer but usually all this does is genertae an error message about them being unavailable OR the name already being in use. BUT the network printer is always available when its card reader isn't and by entering the NAS drive IP adress I can get to its configuration page.
I can usually gain access to the NAS and card reader by disabling and reenabling the laptop wireless connection but it's iritating as I back up to the NAS and this won't work if it shows as disconnected... and the bubble apearing at boot up is also annoying. I've tried disabling the Bullguard firewall with no success.
Any help gratefully received as I thought I'd solved this but it's begun hapening again! Suspect win 7 has patched itself and 'done something'...
I have been having a strange problem where Sync Center seems to be storing network drives as offline folders.
Even though I am connected to the network all the time and the network drives never go offline they still become unavailable. The network drive appear in the sync partnerships but I have not set these up and have been unable to remove them even when turning offline files off and back on again.
The only Sync which should be there is the folder for eel1651 the rest are network drives which it should not be trying to Sync. It is causing files to become unavailable even when I am currently working on them, so I can't save them. [URL]
As you can see here some of the files have become unavailable compared with above. [URL]
I have disabled all the firewalls and AV on computer and the problems is still happening.