I have 2 windows 7 computers in my network and I have a Dlink DNS-323 mass storage devide. my wifes computer has no problem accessing the external hard drive. On my computer I have the red X on both drives in the DNS-323. If i try to access this drive from an application such as Itunes, it tells that the path is invalid or something close to that. I then have to go to Windows Explorer and double click on both drives.
View 7 RepliesI have two networked computers using Windows 7 Ultimate.Both are part of WORKGROUP.Computer 1 has 3 internal drives, one of which is shared and can be accessed by Computer 2; and 1 external drive, also shared and also accessible by Computer 2.Computer 2 has three internal drives, two of which are shared. Permisions are set for Everyone to have full access to both drives.Yet computer 1 can only connect to one of the shared drives.When I try to Map the errant drive from Computer 1, I constantly get the stupid message that I don't have permission.
View 5 Replies View Relatedok i have a home network set up on 2 pcs with win 7 64bit
i have set up shared drives on both pcs ,, i have set the permisions on the shared drives so that everyone can do whatever they want change files delete files ect
so i expect to be able from one pc to cut files and paste to the other but i cant ,,, i cant even copy from one pc to the other unless i do it from the pc that is going to have the file added
I have two desktop PCs running Windows 7 Ultimate, a HP laptop running Windows XP SP3 and a Network Storage Device (Dlink DNS 343 with 3 Raid Volumes) networked via a D Link DIR-635 wireless Router. Both PCs and the DNS-343 are hard-wired to the router: the Laptop connects wirelessly.
Since installing Windows 7 on the PCs, I am unable to map the network drives on the DNS-343 even though all network components are visible and functioing in Windows Network Map, Pure Networks Map and Norton Internet Securities 2010 Network Map(with Full Trust).
This was not previously a problem with one PC running XP SP3 and the other Vista SP1. The DNS-343 does NOT appear as a network device in Windows 7 Windows Explorer: nor does the Laptop, on either PC. The laptop running XP is able to Map network drives as before and access shared folders on both PCs.
To date I have reset the factory defaults on the router and DNS-343;disabled all firewalls and minimised security controls (eg: MAC filtering) as far as I am able. I can ping each device successfully. The problem is I cannot "see" the DNS-343 in Windows 7 Windows Explorer to map the drives.
I have 3 Windows 7 Ultimate computers hooked up to a ATT FastAccess DSL line. They are in a Homegroup. I also have 2 Windows xp Pro computers that are connected to same the FastAccess DSL. From the XP can see all Windows 7/xp computers by browsing the "entire network".
On one of the Windows 7 computers is assigned to Susan. Susan Windows 7 PC has a 4 Tb external hard drive attached to it. I created a folder on the 4 tb external HD called Frank and shared it.
What I am needing to do is on Frank's Windows XP Pro computer is to Map Network Drive and Map to the "frank" folder and have it reconnect at logon. Problem is when it goes to map the folder it wants an id/password to connect to the "frank folder". I can enter the credentials that Susan uses on her PC and the drive will map just fine but I need it to map without asking for any credentials. I already tried "reconnect at logon" and it shows in explorer but wants a password to reconnect.
I was thinking if I create a Frank user id and password on Susan's PC then use those credentials when frank tries to connect to the folder "frank" from his XP Pro PC then that might work. I am not sure.
My problem is with all the users files on the file server don't all show-up. Some stay as 'My Documents'.
I believe there is something to delete within the folders to make it show the names properly, but I can't remember.
We have this recurring issue where some mapped network drives disappear from 'my computer'. They usually appear after 1 or 2 reboots, but having to go through this each time is a bit annoying.Right now all our client computers are running windows 7 pro on a 2008 domain server. We've been having this issue from when we had the 2003 server and its still happening every now and then
View 2 Replies View RelatedI have speed issues when working with files on the LAN network. They open and save much much slower than XP. On the other hand the ADSL internet connection is fine and running at full speed. What is the problem? The computer is brand new and with fresh install of Windows 7 x64.My other problem is with mapped network drives. On the second computer, which is running fresh install of Windows 7 too, we have mapped network drives which are accessable on the whole network. The problem is that every time we start that PC with the mapped network drives Windows says "Could not reconnect all network drives" and all computers on the network show them with red "x" on the icons. I want them to automatically open at startup.
View 2 Replies View RelatedI have installed a wireless Epson Workforce 610 printer (it is fast!) but if it is not turned on when I boot I get a notification message "Could not reconnect all network drives".Is there a setting which will prevent this from displaying? One other computer which has the same drivers does not show this message, so it is puzzling.I disabled all the Epson drivers in Startup but that did not help.
View 3 Replies View RelatedWindows Server 2008 R2Windows 7 32 BitI have a Windows 7 Enterprise box that when started will only create 2 of 3 mapped network drives. This does not happen every time either, just about 2-3 days of the 5 day work week. 2 of the drives are mapped via a script, while the 1 drive that is the problem child is set through the Properties-->Profile-->Home Folder of the user on our AD box. We have set the drop down letter to H and verified the path. It is correct, as it works some days.
View 8 Replies View RelatedA while back I shared all my main pc drives on my newtork by right clicking on the drive in my computer then clicking the share tab. I then later un-shared them by unclicking the tab but all the computers could see the drives that had been previously shared from my main computer. They could even access them even though they had been unshared. I then later reinstalled windows7 on my main computer but the drives are still visible and accessable from computers on my network.
View 1 Replies View RelatedI'v got a problem with mapped network drives.
My configuration:
i have my pc with Windows 7 beta, anda onther old pc with windows xp. I mapped a shared folder on the xp computer ads network drive.
The problem is that even if I save my credentials, the network drive don't reconnect at logon and I have to reenter my credential again.
I have the same username on both pc, on the xp one (where are the shared folders) I have also set a password, on mine not.
I've got a ThinkPad x220 here and randomly started having issues accessing the network (mapped drives and printers). The computer can still access our Intranet (Sharepoint) and Exchange Server (Outlook says connected and we can send/receive)I tried disconnecting the drives and reconnecting, but none of the servers were showing up in the list. I then checked to see if network discovery and file sharing were turned on... they were. Tried manually going to a network drive (i.e. the public drive
View 1 Replies View RelatedI want to know if there is anyway to find out if a network shared drive (showing within 'My Computer') is manually connected/mapped. (btw we are using a AD - GPO & Desktop Authority)I don't want to disconnect all the drives and then log the user off as i want to see if there is a simpler way to check this.
View 1 Replies View RelatedI have a situation where I have folks logging into the domain with their respected credentials. I setup the first users with everything they needed and then realized I would need to imitate this over 4-5 other users on the same machine. Is there a way to do this more effectively rather than by hand?
I want all users to have the same network drives (I have 6 different locations) and I want them to have the same desktop icons for accessing content.
I have a problem with mapped network drives disconnecting.
I run Windows 7 Pro connecting to Win Server 2003. Reboot and the drives are there. After a while a red cross appears against them in Explorer. I can usually see the contents, but running a program that requires those resources fails.
The only way I can reconnect is to reboot, but then the red cross appears again after a while.
I've updated the LAN driver and even tried setting the registry key MaxNonpagedMemoryUsage to 0xFFFFFFFF as recommended in the only comment on the subject I've been able to find.
I'd really appreciate some help here as I don't want to go back to XP!
I'm using XBMC on an HTPC, that connects to a server hosting all the media files.
Both machines run 7 and I'd love to use Libraries to aggregate movies, TV shows, music, pictures, etc. coming from different folders. Unfortunately, from within XBMC libraries are unreachable.
I thought about mapping them to a network drive, but the actual libraries seem to be a *file* and not a *place* (you can check them by creating a shortcut to a library and looking at its properties).
Anything I've missed?
got a new laptop with windows 7. Joined my home wireless network no problem except that after a few days(all was fine at first) when booting up, the NAS drive plugged into the router shows as disconnected in windows explorer. In fact a bubble pops up in the system tray to say some drives cannot be connected (my wireless network printer has a card reader that appears as a drive). Occasionally I can reconnect the NAS and the card reader by clicking on them in explorer but usually all this does is genertae an error message about them being unavailable OR the name already being in use. BUT the network printer is always available when its card reader isn't and by entering the NAS drive IP adress I can get to its configuration page.
I can usually gain access to the NAS and card reader by disabling and reenabling the laptop wireless connection but it's iritating as I back up to the NAS and this won't work if it shows as disconnected... and the bubble apearing at boot up is also annoying. I've tried disabling the Bullguard firewall with no success.
Any help gratefully received as I thought I'd solved this but it's begun hapening again! Suspect win 7 has patched itself and 'done something'...
I have been having a strange problem where Sync Center seems to be storing network drives as offline folders.
Even though I am connected to the network all the time and the network drives never go offline they still become unavailable. The network drive appear in the sync partnerships but I have not set these up and have been unable to remove them even when turning offline files off and back on again.
The only Sync which should be there is the folder for eel1651 the rest are network drives which it should not be trying to Sync. It is causing files to become unavailable even when I am currently working on them, so I can't save them. [URL]
As you can see here some of the files have become unavailable compared with above. [URL]
I have disabled all the firewalls and AV on computer and the problems is still happening.
i have about 10 windows 7 pc's on my network and we have network drives mapped to there pc's the mapped drives keep showing up with a red X and i have to remote to there pc and go thru the netowrk and get to the exact location and click on work online.
View 2 Replies View RelatedSeveral users are getting a delayed response when trying to open a network drive. There are several instances where it would take 15-30 seconds to open a network drive.Also users are having issues saving a document, receiving the error message "access denied you do not have rights to do this" seems like the network connection is breaking at some point to making the computer think there is another copy open.What I've done so far:
latest windows updates
latest word processing and client updates
When I boot up my Windows 7 Professional x64 machine I get that balloon that states "Could not reconnect all network drives". How do I get rid of this? I am hard wired into the network (not wireless) and I cannot find a way around it.
All the solutions I have found state its either due to wireless network authentication occuring late in the boot process (but im hard wired) or that you need to upgrade to a Pro edition of windows (which I cam using).
It is not disasterous if I am being honest its just mildly irritating
I have the problem of a long list of redundant mapped network drives without drive letters, for example, documents, documents~1, documents~2, etc. all with same location...right clicking on the mapped does not present any "disconnect" option.Oh, they do not appear as mapped network drives under "My Computer," but under "Network" and the name of the computer (which is on a wireless network with another computer)...I can go to advanced sharing and stop sharing, but then all folders are unshared including the original...I guess this may be the only way of getting this corrected, but it seems like a long way to do something that should be very simple..
View 4 Replies View RelatedSome observations:
- I have two QNAP NAS servers, which put the drives after 30 mins idle in sleep mode.
- Windows 7 network discovery sees the two NAS servers all the time.
- When you make drive mappings to shares on the NAS servers, (it seems) at random times Explorer hangs (goes into stall) when trying to browse/access files or directories. Only a reboot helps.
- I'm accessing the drives via regular SMB, no HomeGroup, no AD etc.
- When you map the drives initiallially it asks for a password. Storing that account info into the credentials manager doesn't help.
- I tried to open ports 137-139 and 445 in the firewall, but that doesn't help.
My theory is that Windows breaks by default the connection with the NAS after 15 mins of idling. That's standard behaviour. What puzzles me is that Visita didn't have this issue and Windows 7 has.
Do more people have issues with SMB shares ?
I have 2 windows 7 computer on a wireless network in my house. Basically I want to be able to share the drives on both computers so that i can stream media between the computer and also devices in my home (xbox360). I went to set the drives to shared in the properties for the drives on both computers, however, whenever I try to connect to the other computer through the network section I got this pop up asking for a password, I tried login passwords and no go. So I went into the sharing options and turned off password protection and it seemed to let me through, and i can see the drive i named and setup, only now when I try clicking on the drive I shared it says (windows cannot access//Name of Folder). How do I get this to work?
View 5 Replies View Relatednetwork drives for toshiba satellite pro c665
View 1 Replies View Relatedwhen i try installing windows 7 on my netbook over a network it wont detect my hard drives
View 9 Replies View RelatedIn our company, we are using Windows 7 and my goal is to prevent users (also administrators) of specific workstations from running executables which are located on mapped network drives (servers).I tried different things (e.g. Software Restriction Policies or Applocker => in both cases I tried the UNC address as well as the drive letter to set up the rules) but nothing worked.
View 9 Replies View RelatedThis is my situation: I have a virtual machine running, and a network drive which is mapped to that machine.The problem here is that when I am trying to login on windows, windows is first trying to connect to that mapped network drive - which it cannot because my virtual machine has to start up first. This results in a rather long login-time.So my question is, is there some (registry) setting which allows me set this connection timeout to 0? Or that it won't automatically reconnect the drive at login? Of course the setting 'Do not automatically reconnect at login' is too obvious and does not work, because it also removes the whole mapped network drive at system restart - in my situation the drive should be there, just not connected
View 3 Replies View RelatedLong story short, I have shares on three PCs that are not always on. If I make a shortcut to the share and put it on my desktop, sometimes for some reason, the shortcut vanishes. I believe this is because I haven't connected the PC to the network in a while.
So, I went about and mapped those shares to drive letters. All is well, however, it adds another 45 seconds to my boot time.
Pretty sure this is because windows is trying to reconnect to them on boot, but they are disconnected. Is there any way to keep my drive mappings, but not have windows attempt to reconnect on boot?
I know that you will lose your mappings if you do not check "reconnect on login".. so, is there a way to keep the mappings without attempting to reconnect at login?
I'm having problems with Windows 7 whereby the usual mapped network drives we used to use in Windows XP don't quite work as they should in Windows 7. When double clicking the drive to view their contents, it takes me to my home page.Right clicking the drive shows Install/Setup in bold text as the first/default option for double clicking.There is a program on the drive in question but i don't want it to install that program, i just want it to display the contents of the drive.I suppose what I'm trying to ask is: Is there a way I can change the default action for double clicking this particular drive?
View 1 Replies View Related