Network Mapped Drives Diverting To Webpage When Double Clicked?
Sep 7, 2011
I'm having problems with Windows 7 whereby the usual mapped network drives we used to use in Windows XP don't quite work as they should in Windows 7. When double clicking the drive to view their contents, it takes me to my home page.Right clicking the drive shows Install/Setup in bold text as the first/default option for double clicking.There is a program on the drive in question but i don't want it to install that program, i just want it to display the contents of the drive.I suppose what I'm trying to ask is: Is there a way I can change the default action for double clicking this particular drive?
View 1 Replies
ADVERTISEMENT
Jun 13, 2011
We have this recurring issue where some mapped network drives disappear from 'my computer'. They usually appear after 1 or 2 reboots, but having to go through this each time is a bit annoying.Right now all our client computers are running windows 7 pro on a 2008 domain server. We've been having this issue from when we had the 2003 server and its still happening every now and then
View 2 Replies
View Related
Sep 26, 2011
Windows Server 2008 R2Windows 7 32 BitI have a Windows 7 Enterprise box that when started will only create 2 of 3 mapped network drives. This does not happen every time either, just about 2-3 days of the 5 day work week. 2 of the drives are mapped via a script, while the 1 drive that is the problem child is set through the Properties-->Profile-->Home Folder of the user on our AD box. We have set the drop down letter to H and verified the path. It is correct, as it works some days.
View 8 Replies
View Related
Jul 13, 2012
I want to know if there is anyway to find out if a network shared drive (showing within 'My Computer') is manually connected/mapped. (btw we are using a AD - GPO & Desktop Authority)I don't want to disconnect all the drives and then log the user off as i want to see if there is a simpler way to check this.
View 1 Replies
View Related
Nov 17, 2009
I have a problem with mapped network drives disconnecting.
I run Windows 7 Pro connecting to Win Server 2003. Reboot and the drives are there. After a while a red cross appears against them in Explorer. I can usually see the contents, but running a program that requires those resources fails.
The only way I can reconnect is to reboot, but then the red cross appears again after a while.
I've updated the LAN driver and even tried setting the registry key MaxNonpagedMemoryUsage to 0xFFFFFFFF as recommended in the only comment on the subject I've been able to find.
I'd really appreciate some help here as I don't want to go back to XP!
View 5 Replies
View Related
May 25, 2011
I have the problem of a long list of redundant mapped network drives without drive letters, for example, documents, documents~1, documents~2, etc. all with same location...right clicking on the mapped does not present any "disconnect" option.Oh, they do not appear as mapped network drives under "My Computer," but under "Network" and the name of the computer (which is on a wireless network with another computer)...I can go to advanced sharing and stop sharing, but then all folders are unshared including the original...I guess this may be the only way of getting this corrected, but it seems like a long way to do something that should be very simple..
View 4 Replies
View Related
Jan 12, 2013
In our company, we are using Windows 7 and my goal is to prevent users (also administrators) of specific workstations from running executables which are located on mapped network drives (servers).I tried different things (e.g. Software Restriction Policies or Applocker => in both cases I tried the UNC address as well as the drive letter to set up the rules) but nothing worked.
View 9 Replies
View Related
Jun 25, 2012
Long story short, I have shares on three PCs that are not always on. If I make a shortcut to the share and put it on my desktop, sometimes for some reason, the shortcut vanishes. I believe this is because I haven't connected the PC to the network in a while.
So, I went about and mapped those shares to drive letters. All is well, however, it adds another 45 seconds to my boot time.
Pretty sure this is because windows is trying to reconnect to them on boot, but they are disconnected. Is there any way to keep my drive mappings, but not have windows attempt to reconnect on boot?
I know that you will lose your mappings if you do not check "reconnect on login".. so, is there a way to keep the mappings without attempting to reconnect at login?
View 2 Replies
View Related
Jul 31, 2011
I have recently built a new computer and installed Windows 7 on it. At first the operating system could only see 1 of my 1TB hard drives. So I formatted the second to NTFS by using ubuntu live cd. Now my windows system can see the hard drive and I can open it with right mouse click--->open, and can write to it. When I try and double click the drive in My Computer it comes up with a pop up saying E: Application not found. Where I can set the double mouse click to open it?
View 3 Replies
View Related
Nov 8, 2009
I've set up a dual boot with XP and 7. My mapped drives work fine under XP but on 7 they fail to reconnect at startup. I have made sure I ticked "Reconnect at startup" and I have switched on "Always wait for network at computer start up and logon" in Group Policies but still no good. Any suggestions?
View 1 Replies
View Related
Feb 26, 2010
On my Win 7 system, I have mapped 4 drives to a XP system using the "net use" command. They are mapped correctly as p,q,s,t on the Windows 7 system. They show up in the "Power Desk" app which is a file manager utility program. The mapped drives work correctly in that program.However, they don't show up in explorer on the windows 7 system. All other drives are shown, but not the mapped drives. Also, if I bring up the file open dialog box from an app like notepad, they don't show up either.On another Win 7 system, I can map the drives exactly the same way and they do show up in explorer. It must be a setting that is different on the Win 7 system that does not work.
View 3 Replies
View Related
Jul 21, 2009
I've been finding that the new UAC and linux style permission system is pretty annoying (I'm coming to Windows 7 from XP). Yea, I know it's proper security but I haven't had any issues with XP all these years since I know what I'm doing so I really wish my OS would trust me, lol.
Anyway.. I made life pretty comfortable by installing HotKeyBind and having it run as the administrator so whenever I hit Win-D I get an Administrator level DOS window. Usually when I get hamstrung by the limited rights it's when I'm in DOS trying to do something so this got rid of most of my hassles. HKB launches at startup from a batch file in the startup folder which does a "runas" on HKB to launch it as admin.
Now the problem comes from the fact that the DOS process is not running as me, so my mapped drives are not accessible. Even file associations were wrong when launched from that window. So I edited the launch batch to launch a second bat rather than HKB directly. In that batch file I map my drives. Seems to work golden. Alas, it seems at random intervals the system suddenly forgets the domain user I've associated with the drive mappings. (All the drives are remote PCs that require my domain credentials). I made another .bat called "admindrives" that will unmap them all then remap and then they work.
Just now though, I couldn't access my webserver's D$ share, kept getting "Access Denied" in my admin DOS. Admindrives.bat didn't help. Manually remapped the drive.. net use w: webserverd$ /user:domainusername pwd. It mapped with no error, but still couldn't access the drive. Opened a regular non-admin window, went to the W: drive just fine.
It's frustrating as hell. I wish I could just make my domain account act like the super-admin, or make the super-admin have a domain user token.
Anyone know of a way to handle mapped drives like this? Has anyone found a way yet to make a domain account have the full no-limits admin privledges?
View 8 Replies
View Related
Feb 14, 2011
Windows 7 Prof 32 bit, with Office 2003 SP3 on a Dell laptop. Everything works fine when on the network and connected. If the user takes the laptop offsite without shutting it down first and still has mapped drives when he tries to save a document the drop down menu will hang any Office app.To explain a bit more... in the Save As dialog box, the drop down menu to change locations it was freezes it up. After about 30 seconds or so the menu will finally appear and the application will be happy again. The user doesn't have that kind of patience though.This isn't a new issue, I've found its due to the mapped network drives being unreachable. I do not have this problem in XP, only Windows 7. This is very annoying to the user. Short of removing the mapped drives with a script that the users has to run when they leave the office what can I do? I've looked around the web a lot and can't find much more than "disconnect the mapped drives" and I dont think of that as a solution so much as a work around.
The user is the CEO of the company I work for and he often uses his laptop at home, then gets in the car and uses it on his way to the office (obviously he isn't driving himself) and then gets into the office and wants his drives to just magically workAlso, trying to change how he uses the laptop won't work either. This is not a tech savvy user. This user also resist change (obviously, still using Office 2003)
View 6 Replies
View Related
Aug 24, 2012
I have a windows 7 pc that is part of an office network along with about 5 other machines. They are all supposed to connect to a server via network mapping of the server's shared folder. (In this case the mapping is Z:\pi-serverdata and the server is running 2008 R2 on a workgroup). Upon reboot, all systems but one will remap to this drive with no problem.
The one machine will always boot up with the message 'Windows could not reconnect network drives' The mapping is showing in windows explorer but there is a red 'x' icon showing the connection is lost. When I click on it, it prompts for windows credentials, which I enter and then it remaps with no problems. However upon next boot the same thing happens again. No matter what I try I cannot get the system to retain the credentials.
What I have tried so far:
1. Ensuring that there is a match of user names and passwords on the server and workstation.
2. Deleting the mapping and re-adding it.
3. Running a batch file to delay the mapping in order for windows to finish connecting the network first.
I would like to be able to browse to the network folder via network discovery through the workgroup but this particular machine does not have the server show up in the network listing (all other machines do show the server). Plus when pinging the server, it insists on responding with ipv6 unless I force a v4 ping...not sure it's relevant.
View 1 Replies
View Related
Nov 8, 2009
I map drives when I log in for my various network shares:
p: = fileserverd$
w: = webserverd$
Works great, everything normal. When I want to do something with higher privs, I run a DOS shortcut that's set to run as administrator. The DOS window opens and I cannot then access my mapped drives.
View 0 Replies
View Related
Jan 31, 2013
Recently, I purchased a built computer from a small PC shop. I had trouble connecting to the internet, so the technician who built it came and added a network adapter card and changed some settings. (Not sure what he did.) After he left, my drives were not detected at all, not in My Computer nor in Device Manager so I did a system restore, which got the drives back but then I had trouble connecting to the internet again. So, I undid the system restore and connected OK again. A day later, I noticed I could not open a disc by double clicking on the drive in My Computer. I have two optical drives and its the same with both drives. I can right click and open to view files but not play disc. ( Movie nor music.) I can play them through the autoplay dialogue box though. I went into safe mode and tried and they will play in there by double clicking the drive. What happens when I try to play by double clicking the drive is I got a message first saying, The file does not have a program associated with it for performing this action. Please install a program or if one is already installed, create an association in the Default Programs Control Panel. I checked the Default Programs and they were set properly. Then, when I tried double clicking the drives again, got a different message. This time saying, Windows cannot access the specified device, path or file. You may not have the appropriate permissions to access this item. I also ran MalwareBytes and MSE in both normal and safe modes. Nothing was detected either place. I also went into Device Manager and uninstalled the drives and restarted my computer for them to be detected again and they were but still didnt correct the problem.
View 10 Replies
View Related
Jun 20, 2012
Server - Windows Server 2003 (Small Business Server, if it matters but I think its a Win 7 setting at fault myself)
Client - Windows 7
F: on client mapped to \serverusersmickeymouse
View 2 Replies
View Related
Apr 6, 2012
Our domain controller is a Win Server 2003 R3, and we recently replaced several workstations with newer hardware running Win 7 Pro x64. For the most part, every thing runs smoothly. We have a shared folder on the 2003 machine that everyone uses to store their data. Everyone logs on to the domain, not the local machine. The problem happens when a machine is left on for more than one day. I don't know if it is on a regular interval, but I haven't noticed it as such. Eventually there is an error when trying to connect to the mapped drive: "U:\ is not accessible. An unexpected network error occurred."
When trying to browse the server from the Network in the Start Menu I get this: "Windows cannot access \\servername Check the spelling of the name... Error code 0x80070035 the network path was not found." I get a positive response when I ping the server's name and IP address from the client computer, and vice versa. I checked that the following services were running on both machines: workstation, server, tcp/ip netbios helper, DHCP client, DNS Client. The client computer's Ethernet adapter settings uses the server as the Preferred DNS Server in the IPv4 properties [it is set manually].
I tried ipconfig /flushdns on the client, then ran gpupdate in an administrator cmd window, still got an error. I ran gpresult /h gpreport.html and will attach that file for inspection. There are some errors in the system event log with GroupPolicy as the source and 1030 as the Event ID. Sometimes there is an error in the log with NETLOGON as the source and 5719 as the Event ID. What really makes it aggravating is that it only happens when the client computers are left on for more than a work day. If they are rebooted, it works fine.
View 14 Replies
View Related
Sep 24, 2009
I found many tutorials explaining how to pin custom things to the Windows 7 "super-bar"
maybe i read wrong but i didn't found anything about pinning a shortcut from a virtual mapped drive..
so, saying my virtual drive (mapped using net use ..) is R:,
what i want, is to have in my super-bar a shortcut to R:fooar.exe
is this possible ?
View 9 Replies
View Related
May 19, 2012
I run some CAD and compiler software that (unfortunately!) uses absolute path names in project files, so I need to access all my files with exactly the same path for my PC and my laptop. Enventually I want to put all files on an external NAS drive, but only have the PC at the moment.So my first thought was create a folder on my PC, say C:X_Drive, map it as a network drive, say X:, and share the folder as X: on the laptop. Then I'd always access files through the mapped drive, and all paths would be consistent, and moving to an external drive should be trivial.
This sort of works. I've set up the Security tab to give everyone full access. I can read and write the folder itself, but cannot write to the mapped drive version on the same PC, I'm warned I don't have permission. I'm an administrator and the only user on the system. I've tried UNC addressing and direct fixed IP addressing when mapping, no joy. Subst doesn't work properly either (drive comes up as disconnected in explorer, but I believe that's a known Windows bug).
View 1 Replies
View Related
Mar 21, 2011
I'm using XP. I have mapped a network drive to a Windows 7 computer as administrator. I am trying to navigate to Z:UsersMaryPicturesMary's Pictures. But when I navigate to Z:UsersMaryPictures I don't see "Mary's Pictures". I can see "Mary's Pictures" if I'm at her computer.What do I have to do to see all folders and files on Z?
View 6 Replies
View Related
Nov 14, 2012
I have a windows 7 desktop with an SSD and regular mechanical hard drive where I keep my data. I also have a laptop with a small SSD as well. I want to keep the laptop free of non-critical data so I decided to setup a file share between my desktop (Windows 7 home prem) and my laptop (Windows 7 pro). I was able share the files and navigate to my desktop through my laptop. I successfully mapped the folder as a network drive and all was well. Then I rebooted and I was disconnected from it, it remembered that it was there but I needed to manually connect to it and I needed to provide my login credentials. There is no password just a username. Also is there a way to set a timeout because if my desktop is not on and I want to use my laptop, the boot times are much longer compared to when I don't have the mapped network drive on my laptop at all.
View 9 Replies
View Related
Nov 26, 2012
I am working with a Dropbox account on my Domain, and ideally I would like to make my "local Dropbox folder" on a mapped network drive. When I attempt to do so I am met with the following error - [URL]
View 1 Replies
View Related
Oct 12, 2011
I've read that with the mklink command one can create symlinks in windows to mapped network drives. still, whenever I add such a drive as a parameter to the command, I get the error "the file or directory is not a reparse point".What could be the problem? Is there another way to create a symlink on a network destination?
View 3 Replies
View Related
Jul 25, 2012
I have a problem with the speed of my mapped network drive. At first al is wel and file loading is as fast as to be expected. But after some time the transfer speed drops dramaticaly and it becomes very slow. I tested it primaraly with loading of image sequences, but it affects all file loading the same. If I logoff and login to windows again the speed is back to its full potential. And then after some time again it drops. I have seached the internet for similar ploblems, but could not find this kind of problem, only the dropping of the connection entirely, but thats not the case here.
All user PC's that have the network drive mapped are windows7 Pro PC's with gigabit lan. The server PC is also windows7 with quad gigabit lan, teamed to 1 connection. A 4 ssd raid setup via a MSI megaRaid controller provides the drive for mapping. The switch is a HP proCurve 1810G-24. Jumbo frames is disabled on all devices. Because i have no domain, the password protection for file sharing on the server is disabled, so al user PC's can connect to the mapped network drive with their own username.
Is there some sort of idle timer on the mapped network drive that could be responsible or something?
View 1 Replies
View Related
Dec 21, 2012
I mapped a drive to my laptop from my desktop to copy 1 folder from the mapped drive.When completed I found files missing from the original that i do not see on either laptop or desktop. Where did they go and how can i get them back?
View 4 Replies
View Related
Apr 9, 2011
I have 2 windows 7 computers in my network and I have a Dlink DNS-323 mass storage devide. my wifes computer has no problem accessing the external hard drive. On my computer I have the red X on both drives in the DNS-323. If i try to access this drive from an application such as Itunes, it tells that the path is invalid or something close to that. I then have to go to Windows Explorer and double click on both drives.
View 7 Replies
View Related
Dec 22, 2012
I have two networked computers using Windows 7 Ultimate.Both are part of WORKGROUP.Computer 1 has 3 internal drives, one of which is shared and can be accessed by Computer 2; and 1 external drive, also shared and also accessible by Computer 2.Computer 2 has three internal drives, two of which are shared. Permisions are set for Everyone to have full access to both drives.Yet computer 1 can only connect to one of the shared drives.When I try to Map the errant drive from Computer 1, I constantly get the stupid message that I don't have permission.
View 5 Replies
View Related
Oct 19, 2011
ok i have a home network set up on 2 pcs with win 7 64bit
i have set up shared drives on both pcs ,, i have set the permisions on the shared drives so that everyone can do whatever they want change files delete files ect
so i expect to be able from one pc to cut files and paste to the other but i cant ,,, i cant even copy from one pc to the other unless i do it from the pc that is going to have the file added
View 7 Replies
View Related
Jan 1, 2010
I have two desktop PCs running Windows 7 Ultimate, a HP laptop running Windows XP SP3 and a Network Storage Device (Dlink DNS 343 with 3 Raid Volumes) networked via a D Link DIR-635 wireless Router. Both PCs and the DNS-343 are hard-wired to the router: the Laptop connects wirelessly.
Since installing Windows 7 on the PCs, I am unable to map the network drives on the DNS-343 even though all network components are visible and functioing in Windows Network Map, Pure Networks Map and Norton Internet Securities 2010 Network Map(with Full Trust).
This was not previously a problem with one PC running XP SP3 and the other Vista SP1. The DNS-343 does NOT appear as a network device in Windows 7 Windows Explorer: nor does the Laptop, on either PC. The laptop running XP is able to Map network drives as before and access shared folders on both PCs.
To date I have reset the factory defaults on the router and DNS-343;disabled all firewalls and minimised security controls (eg: MAC filtering) as far as I am able. I can ping each device successfully. The problem is I cannot "see" the DNS-343 in Windows 7 Windows Explorer to map the drives.
View 6 Replies
View Related
Jun 21, 2010
I have 3 Windows 7 Ultimate computers hooked up to a ATT FastAccess DSL line. They are in a Homegroup. I also have 2 Windows xp Pro computers that are connected to same the FastAccess DSL. From the XP can see all Windows 7/xp computers by browsing the "entire network".
On one of the Windows 7 computers is assigned to Susan. Susan Windows 7 PC has a 4 Tb external hard drive attached to it. I created a folder on the 4 tb external HD called Frank and shared it.
What I am needing to do is on Frank's Windows XP Pro computer is to Map Network Drive and Map to the "frank" folder and have it reconnect at logon. Problem is when it goes to map the folder it wants an id/password to connect to the "frank folder". I can enter the credentials that Susan uses on her PC and the drive will map just fine but I need it to map without asking for any credentials. I already tried "reconnect at logon" and it shows in explorer but wants a password to reconnect.
I was thinking if I create a Frank user id and password on Susan's PC then use those credentials when frank tries to connect to the folder "frank" from his XP Pro PC then that might work. I am not sure.
View 4 Replies
View Related
