Can't See Mapped Drives In Explorer?

Feb 26, 2010

On my Win 7 system, I have mapped 4 drives to a XP system using the "net use" command. They are mapped correctly as p,q,s,t on the Windows 7 system. They show up in the "Power Desk" app which is a file manager utility program. The mapped drives work correctly in that program.However, they don't show up in explorer on the windows 7 system. All other drives are shown, but not the mapped drives. Also, if I bring up the file open dialog box from an app like notepad, they don't show up either.On another Win 7 system, I can map the drives exactly the same way and they do show up in explorer. It must be a setting that is different on the Win 7 system that does not work.

View 3 Replies


ADVERTISEMENT

Mapped Drives Not Connecting

Nov 8, 2009

I've set up a dual boot with XP and 7. My mapped drives work fine under XP but on 7 they fail to reconnect at startup. I have made sure I ticked "Reconnect at startup" and I have switched on "Always wait for network at computer start up and logon" in Group Policies but still no good. Any suggestions?

View 1 Replies View Related

Disappearing Mapped Network Drives?

Jun 13, 2011

We have this recurring issue where some mapped network drives disappear from 'my computer'. They usually appear after 1 or 2 reboots, but having to go through this each time is a bit annoying.Right now all our client computers are running windows 7 pro on a 2008 domain server. We've been having this issue from when we had the 2003 server and its still happening every now and then

View 2 Replies View Related

1 Of 3 Mapped Network Drives Not Showing Up?

Sep 26, 2011

Windows Server 2008 R2Windows 7 32 BitI have a Windows 7 Enterprise box that when started will only create 2 of 3 mapped network drives. This does not happen every time either, just about 2-3 days of the 5 day work week. 2 of the drives are mapped via a script, while the 1 drive that is the problem child is set through the Properties-->Profile-->Home Folder of the user on our AD box. We have set the drop down letter to H and verified the path. It is correct, as it works some days.

View 8 Replies View Related

Manually Mapped Network Drives?

Jul 13, 2012

I want to know if there is anyway to find out if a network shared drive (showing within 'My Computer') is manually connected/mapped. (btw we are using a AD - GPO & Desktop Authority)I don't want to disconnect all the drives and then log the user off as i want to see if there is a simpler way to check this.

View 1 Replies View Related

Mapped Network Drives Are Lost

Nov 17, 2009

I have a problem with mapped network drives disconnecting.

I run Windows 7 Pro connecting to Win Server 2003. Reboot and the drives are there. After a while a red cross appears against them in Explorer. I can usually see the contents, but running a program that requires those resources fails.

The only way I can reconnect is to reboot, but then the red cross appears again after a while.

I've updated the LAN driver and even tried setting the registry key MaxNonpagedMemoryUsage to 0xFFFFFFFF as recommended in the only comment on the subject I've been able to find.

I'd really appreciate some help here as I don't want to go back to XP!

View 5 Replies View Related

Mapped Network Drives Without Drive Letters?

May 25, 2011

I have the problem of a long list of redundant mapped network drives without drive letters, for example, documents, documents~1, documents~2, etc. all with same location...right clicking on the mapped does not present any "disconnect" option.Oh, they do not appear as mapped network drives under "My Computer," but under "Network" and the name of the computer (which is on a wireless network with another computer)...I can go to advanced sharing and stop sharing, but then all folders are unshared including the original...I guess this may be the only way of getting this corrected, but it seems like a long way to do something that should be very simple..

View 4 Replies View Related

Admin Mapped Drives Acting Weird

Jul 21, 2009

I've been finding that the new UAC and linux style permission system is pretty annoying (I'm coming to Windows 7 from XP). Yea, I know it's proper security but I haven't had any issues with XP all these years since I know what I'm doing so I really wish my OS would trust me, lol.

Anyway.. I made life pretty comfortable by installing HotKeyBind and having it run as the administrator so whenever I hit Win-D I get an Administrator level DOS window. Usually when I get hamstrung by the limited rights it's when I'm in DOS trying to do something so this got rid of most of my hassles. HKB launches at startup from a batch file in the startup folder which does a "runas" on HKB to launch it as admin.

Now the problem comes from the fact that the DOS process is not running as me, so my mapped drives are not accessible. Even file associations were wrong when launched from that window. So I edited the launch batch to launch a second bat rather than HKB directly. In that batch file I map my drives. Seems to work golden. Alas, it seems at random intervals the system suddenly forgets the domain user I've associated with the drive mappings. (All the drives are remote PCs that require my domain credentials). I made another .bat called "admindrives" that will unmap them all then remap and then they work.

Just now though, I couldn't access my webserver's D$ share, kept getting "Access Denied" in my admin DOS. Admindrives.bat didn't help. Manually remapped the drive.. net use w: webserverd$ /user:domainusername pwd. It mapped with no error, but still couldn't access the drive. Opened a regular non-admin window, went to the W: drive just fine.

It's frustrating as hell. I wish I could just make my domain account act like the super-admin, or make the super-admin have a domain user token.

Anyone know of a way to handle mapped drives like this? Has anyone found a way yet to make a domain account have the full no-limits admin privledges?

View 8 Replies View Related

Office 2003 On Windows 7 - Disconnected Mapped Drives?

Feb 14, 2011

Windows 7 Prof 32 bit, with Office 2003 SP3 on a Dell laptop. Everything works fine when on the network and connected. If the user takes the laptop offsite without shutting it down first and still has mapped drives when he tries to save a document the drop down menu will hang any Office app.To explain a bit more... in the Save As dialog box, the drop down menu to change locations it was freezes it up. After about 30 seconds or so the menu will finally appear and the application will be happy again. The user doesn't have that kind of patience though.This isn't a new issue, I've found its due to the mapped network drives being unreachable. I do not have this problem in XP, only Windows 7. This is very annoying to the user. Short of removing the mapped drives with a script that the users has to run when they leave the office what can I do? I've looked around the web a lot and can't find much more than "disconnect the mapped drives" and I dont think of that as a solution so much as a work around.

The user is the CEO of the company I work for and he often uses his laptop at home, then gets in the car and uses it on his way to the office (obviously he isn't driving himself) and then gets into the office and wants his drives to just magically workAlso, trying to change how he uses the laptop won't work either. This is not a tech savvy user. This user also resist change (obviously, still using Office 2003)

View 6 Replies View Related

Server Shared Folder - Cannot Reconnect Mapped Drives

Aug 24, 2012

I have a windows 7 pc that is part of an office network along with about 5 other machines. They are all supposed to connect to a server via network mapping of the server's shared folder. (In this case the mapping is Z:\pi-serverdata and the server is running 2008 R2 on a workgroup). Upon reboot, all systems but one will remap to this drive with no problem.

The one machine will always boot up with the message 'Windows could not reconnect network drives' The mapping is showing in windows explorer but there is a red 'x' icon showing the connection is lost. When I click on it, it prompts for windows credentials, which I enter and then it remaps with no problems. However upon next boot the same thing happens again. No matter what I try I cannot get the system to retain the credentials.

What I have tried so far:
1. Ensuring that there is a match of user names and passwords on the server and workstation.
2. Deleting the mapping and re-adding it.
3. Running a batch file to delay the mapping in order for windows to finish connecting the network first.

I would like to be able to browse to the network folder via network discovery through the workgroup but this particular machine does not have the server show up in the network listing (all other machines do show the server). Plus when pinging the server, it insists on responding with ipv6 unless I force a v4 ping...not sure it's relevant.

View 1 Replies View Related

Prevent Executables From Running On Mapped Network Drives?

Jan 12, 2013

In our company, we are using Windows 7 and my goal is to prevent users (also administrators) of specific workstations from running executables which are located on mapped network drives (servers).I tried different things (e.g. Software Restriction Policies or Applocker => in both cases I tried the UNC address as well as the drive letter to set up the rules) but nothing worked.

View 9 Replies View Related

Sharing Mapped Drives Between Admin Level And Normal

Nov 8, 2009

I map drives when I log in for my various network shares:

p: = fileserverd$

w: = webserverd$

Works great, everything normal. When I want to do something with higher privs, I run a DOS shortcut that's set to run as administrator. The DOS window opens and I cannot then access my mapped drives.

View 0 Replies View Related

Mapped Network Drives, Slower Boot Time

Jun 25, 2012

Long story short, I have shares on three PCs that are not always on. If I make a shortcut to the share and put it on my desktop, sometimes for some reason, the shortcut vanishes. I believe this is because I haven't connected the PC to the network in a while.

So, I went about and mapped those shares to drive letters. All is well, however, it adds another 45 seconds to my boot time.

Pretty sure this is because windows is trying to reconnect to them on boot, but they are disconnected. Is there any way to keep my drive mappings, but not have windows attempt to reconnect on boot?

I know that you will lose your mappings if you do not check "reconnect on login".. so, is there a way to keep the mappings without attempting to reconnect at login?

View 2 Replies View Related

Mapped Drives Hidden On Server During Remote Desktop Only In Windows 7

Jun 20, 2012

Server - Windows Server 2003 (Small Business Server, if it matters but I think its a Win 7 setting at fault myself)

Client - Windows 7

F: on client mapped to \serverusersmickeymouse

View 2 Replies View Related

Windows 7 Pro X64 Group Policy Error - Mapped Drives Not Connectable After A While

Apr 6, 2012

Our domain controller is a Win Server 2003 R3, and we recently replaced several workstations with newer hardware running Win 7 Pro x64. For the most part, every thing runs smoothly. We have a shared folder on the 2003 machine that everyone uses to store their data. Everyone logs on to the domain, not the local machine. The problem happens when a machine is left on for more than one day. I don't know if it is on a regular interval, but I haven't noticed it as such. Eventually there is an error when trying to connect to the mapped drive: "U:\ is not accessible. An unexpected network error occurred."

When trying to browse the server from the Network in the Start Menu I get this: "Windows cannot access \\servername Check the spelling of the name... Error code 0x80070035 the network path was not found." I get a positive response when I ping the server's name and IP address from the client computer, and vice versa. I checked that the following services were running on both machines: workstation, server, tcp/ip netbios helper, DHCP client, DNS Client. The client computer's Ethernet adapter settings uses the server as the Preferred DNS Server in the IPv4 properties [it is set manually].

I tried ipconfig /flushdns on the client, then ran gpupdate in an administrator cmd window, still got an error. I ran gpresult /h gpreport.html and will attach that file for inspection. There are some errors in the system event log with GroupPolicy as the source and 1030 as the Event ID. Sometimes there is an error in the log with NETLOGON as the source and 5719 as the Event ID. What really makes it aggravating is that it only happens when the client computers are left on for more than a work day. If they are rebooted, it works fine.

View 14 Replies View Related

Network Mapped Drives Diverting To Webpage When Double Clicked?

Sep 7, 2011

I'm having problems with Windows 7 whereby the usual mapped network drives we used to use in Windows XP don't quite work as they should in Windows 7. When double clicking the drive to view their contents, it takes me to my home page.Right clicking the drive shows Install/Setup in bold text as the first/default option for double clicking.There is a program on the drive in question but i don't want it to install that program, i just want it to display the contents of the drive.I suppose what I'm trying to ask is: Is there a way I can change the default action for double clicking this particular drive?

View 1 Replies View Related

SkyDrive Mapped To Windows Explorer?

Mar 26, 2011

I connected skydrive to my Windows Explorer following this instructions How-to: Connect Your SkyDrive In Windows Explorer | mynetx And I did it,but it shows me wrong information. It says 136gb free of 277gb but it should be 24.99 gb free of 25 gb. Here is a Screenshot.

View 5 Replies View Related

Explorer Not Showing Drives

Apr 9, 2009

Can someone help me how to solve this problem?

F drive (label: Multimedia) and G drive (label: Download) doesn't show in Windows 7 explorer

And here's the Disk Management window

Anyone can help me with this?

I'm running on Windows7 Build 6801 32bit

View 6 Replies View Related

Unable To See Empty Drives In Explorer?

Nov 18, 2011

I have tried every conceivable way to get Explorer to let me view my empty drives under Computer. They show when there's a disk in them. They show in the reading pane, they just won't show up as empty drives in the Nav pane. I have tried deleting the upper and lower filters in the registry. Un checking the "Hide empty drives" in Folder options, adding a (1) to the registry settting "Hide drives with no Media". That setting seems to change itself back to (0) all the time. I am totally at a loss getting the empty drives to show themselves in the Nav pane.

View 6 Replies View Related

Using Media Drives With Windows 7 Explorer 64-bit?

Sep 12, 2012

RECENT PROBLEMS REQUIRING A FIX1. Although the Autoplay is selected as default, neither my DVD/CD Drive NOR MY Blue Ray drive will autoplay. They require to be opened manually.2. I am unable to use Drag-and-Drop in Windows Explorer to copy files to a removable disc OF ANY TYPE/BRAND, yet both drives will successfully PLAY from any media source.3. The Right-hand mouse click no longer shows the normal options. This situation applies irrespective of which mouse I use. For example, when I load OR try to copy files to a new disc, I get a message panel telling me the disc is not recognised and asking for it to be formatted.

View 1 Replies View Related

CD Drives Missing From Windows 7 Explorer?

Oct 26, 2010

I have upgraded to Windows 7 Ultimate, since then I have not had the CD drives showing in windows explorer in the drop down section on the left. If I put a disc in it then shows up. I am used to XP and all my drives showing.I looked at the properties for the drives and there is the message showing, Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19) instead of "this device is working properly".

View 4 Replies View Related

Network Drives Cause Explorer To Hang And Crash

Nov 3, 2009

Some observations:

- I have two QNAP NAS servers, which put the drives after 30 mins idle in sleep mode.

- Windows 7 network discovery sees the two NAS servers all the time.

- When you make drive mappings to shares on the NAS servers, (it seems) at random times Explorer hangs (goes into stall) when trying to browse/access files or directories. Only a reboot helps.

- I'm accessing the drives via regular SMB, no HomeGroup, no AD etc.

- When you map the drives initiallially it asks for a password. Storing that account info into the credentials manager doesn't help.

- I tried to open ports 137-139 and 445 in the firewall, but that doesn't help.

My theory is that Windows breaks by default the connection with the NAS after 15 mins of idling. That's standard behaviour. What puzzles me is that Visita didn't have this issue and Windows 7 has.

Do more people have issues with SMB shares ?

View 1 Replies View Related

Inserting Or Removing Drives From USB Causes Windows Explorer To Restart?

Jun 30, 2012

I have a problem where roughly 25% of the time I insert or remove a thumb drive, my cellphone, or an external hd, windows explorer restarts. This is mostly a problem for me because certain programs in my tray are not restored and I have no way to access them after that even though they are still running. Could you help me figure out why this is happening or how to access a program if it's tray icon disappears?I've got an HP Pavillion Elite HPE and I've noticed this occurring with all of my front facing USB Ports.

View 2 Replies View Related

Accessing Drives In Explorer Takes A Long Time

Feb 9, 2009

I'm not sure why this is happening, but if I attempt to open a drive in Windows Explorer, it takes a really long time (sometimes several minutes). It takes that long for the progress bar on the address bar to fill up. Does anyone know why this would be?

View 8 Replies View Related

"Hide Empty Drives" In Windows Explorer?

Feb 3, 2011

I enabled in WinExplorer menu Tools->Folder options->View->Hide empty drives in the computer folder.However (even after restart) empty dirves (like my DVD drive (=no media inside)) are shown in WinExplorer as drives.How can I disable otherwise empty drives in WinExplorer?

View 7 Replies View Related

Win 7 Not Showing "network" Attached Drives In Explorer

Feb 5, 2009

Let me explain. These are usb drives connected on a network usb hub. No issues with hub, software, sharing on the hub over network. The only small issue is that for example,clicking on my computer to show drives(which it works and shows them this way in preview task pane window), but on the left pane window where its the "folders" view, under my computer all i show is attached IDE/SATA and local usb attached drives.

This does not concern an issue as a mapped network drive as it is NOT setup as and not needed. Software for the hub controls all of that.

This was not an issue with xp.

[edit] Another issue with this is the right click send-to menu... shows local usb, and just shows 2 out of 4 currently connected usb network drives, all connected via the usb hub either directly plugged in, or plugged into to the network hub via another 4port usb regular hub, which by manufacturer's specs is possible and the device is allowed up to 16 connected devices to the network 4 port usb hub.

[edit #2] The above issue with the 2 of 4 drives seems to be related to NTFS and FAT32 as the 2 shown in the right click send to menu are the NTFS drives, not the FAT32.

[edit #3] Update: The drives that show in the navigation pane (left side) of explorer is the NTFS drives, not the FAT32, same with right click send to menu. Although they show up

View 3 Replies View Related

No Thumbnails For MAPPED Drive

Dec 14, 2011

When I upgraded from XP (a long time ago) I deleted all the thumbs.db files. I can see thumbnails on my local C: drive. If I browse my network drive I can see thumbnails.

But I have also mapped my network drive as Z:. If I browse the mapped drive I can't see thumbnails.

Can anybody confirm that they can/cannot see thumbnails on mapped drives that don't contain thumbs.db.

Folders don't initially incorporate Folder.jpg into their thumbnail. If I browse into the folder I can see the thumbnail for Folder.jpg only. If I then return to the parent folder the folder now incorporates Folder.jpg into it's thumbnail.

View 5 Replies View Related

Pin A Network Mapped Shorcut

Sep 24, 2009

I found many tutorials explaining how to pin custom things to the Windows 7 "super-bar"

maybe i read wrong but i didn't found anything about pinning a shortcut from a virtual mapped drive..

so, saying my virtual drive (mapped using net use ..) is R:,

what i want, is to have in my super-bar a shortcut to R:fooar.exe

is this possible ?

View 9 Replies View Related

Problem With Mapped Drive

Dec 14, 2009

I run a small network in my business. The software I use is perfectly adapted to my use, but it is written in DOS Basic. This limits my access to network devices.

Until now using windows XP, I solved this problem by choosing one hard drive (C) as my server drive and mapping a (Z) virtual drive in every computer to that (C) drive.

I can access and update info in the server (C) drive from any computer, once I have shared and established permission levels. I share the root of the (C) drive, so everything is accessible.

Now I try this with Windows 7 and I cannot access the server (C) drive from the virtual (Z) drive from my programs, although I can see the (C) drive when I open the (Z) drive.

I have tried every possible level of permission settings, and still no luck. My question is this ...am I missing something here, or is it just impossible to do this in Windows 7?

View 0 Replies View Related

Mapped Network Drive On Same PC Not Writable?

May 19, 2012

I run some CAD and compiler software that (unfortunately!) uses absolute path names in project files, so I need to access all my files with exactly the same path for my PC and my laptop. Enventually I want to put all files on an external NAS drive, but only have the PC at the moment.So my first thought was create a folder on my PC, say C:X_Drive, map it as a network drive, say X:, and share the folder as X: on the laptop. Then I'd always access files through the mapped drive, and all paths would be consistent, and moving to an external drive should be trivial.

This sort of works. I've set up the Security tab to give everyone full access. I can read and write the folder itself, but cannot write to the mapped drive version on the same PC, I'm warned I don't have permission. I'm an administrator and the only user on the system. I've tried UNC addressing and direct fixed IP addressing when mapping, no joy. Subst doesn't work properly either (drive comes up as disconnected in explorer, but I believe that's a known Windows bug).

View 1 Replies View Related

Recycle Bin Does Not Recognize A Mapped Drive

Oct 28, 2009

I use the subst command to map my d:downloads to A:

In windows XP recycle bin moved any deleted files from A: to the bin, but in windows 7 it doesn't. I can drag the files from the a: to the destop or another drive, then delete them from there to be stored in RB (just in case i need to restore them) but anything deleted from the A: is just deleted.

any ideas how to make the RB recognise a mapped (virtual) drive?

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved