No Thumbnails For MAPPED Drive
Dec 14, 2011
When I upgraded from XP (a long time ago) I deleted all the thumbs.db files. I can see thumbnails on my local C: drive. If I browse my network drive I can see thumbnails.
But I have also mapped my network drive as Z:. If I browse the mapped drive I can't see thumbnails.
Can anybody confirm that they can/cannot see thumbnails on mapped drives that don't contain thumbs.db.
Folders don't initially incorporate Folder.jpg into their thumbnail. If I browse into the folder I can see the thumbnail for Folder.jpg only. If I then return to the parent folder the folder now incorporates Folder.jpg into it's thumbnail.
View 5 Replies
ADVERTISEMENT
Dec 14, 2009
I run a small network in my business. The software I use is perfectly adapted to my use, but it is written in DOS Basic. This limits my access to network devices.
Until now using windows XP, I solved this problem by choosing one hard drive (C) as my server drive and mapping a (Z) virtual drive in every computer to that (C) drive.
I can access and update info in the server (C) drive from any computer, once I have shared and established permission levels. I share the root of the (C) drive, so everything is accessible.
Now I try this with Windows 7 and I cannot access the server (C) drive from the virtual (Z) drive from my programs, although I can see the (C) drive when I open the (Z) drive.
I have tried every possible level of permission settings, and still no luck. My question is this ...am I missing something here, or is it just impossible to do this in Windows 7?
View 0 Replies
View Related
May 19, 2012
I run some CAD and compiler software that (unfortunately!) uses absolute path names in project files, so I need to access all my files with exactly the same path for my PC and my laptop. Enventually I want to put all files on an external NAS drive, but only have the PC at the moment.So my first thought was create a folder on my PC, say C:X_Drive, map it as a network drive, say X:, and share the folder as X: on the laptop. Then I'd always access files through the mapped drive, and all paths would be consistent, and moving to an external drive should be trivial.
This sort of works. I've set up the Security tab to give everyone full access. I can read and write the folder itself, but cannot write to the mapped drive version on the same PC, I'm warned I don't have permission. I'm an administrator and the only user on the system. I've tried UNC addressing and direct fixed IP addressing when mapping, no joy. Subst doesn't work properly either (drive comes up as disconnected in explorer, but I believe that's a known Windows bug).
View 1 Replies
View Related
Oct 28, 2009
I use the subst command to map my d:downloads to A:
In windows XP recycle bin moved any deleted files from A: to the bin, but in windows 7 it doesn't. I can drag the files from the a: to the destop or another drive, then delete them from there to be stored in RB (just in case i need to restore them) but anything deleted from the A: is just deleted.
any ideas how to make the RB recognise a mapped (virtual) drive?
View 4 Replies
View Related
Mar 21, 2011
I'm using XP. I have mapped a network drive to a Windows 7 computer as administrator. I am trying to navigate to Z:UsersMaryPicturesMary's Pictures. But when I navigate to Z:UsersMaryPictures I don't see "Mary's Pictures". I can see "Mary's Pictures" if I'm at her computer.What do I have to do to see all folders and files on Z?
View 6 Replies
View Related
Nov 16, 2009
Still showing up under My Computer. Anyone else have this problem? Suggestions?
View 2 Replies
View Related
Dec 16, 2009
I have a mapped drive that goes to a folder on my internal drive. when my computer starts up the drive will not connect automatically, but connects as soon as I click on it.
I have tried to recreate this drive a few times and always click re-connect on logon but it does not help.
It did work fine for a period so I presume i have done something to stop it working, but can't think what.
I think it may be a setting in my start up configuration (I manage this through CC Cleaner), but can't see what i've switched off.
any ideas?
View 3 Replies
View Related
Dec 31, 2009
On startup, I get the message shown below. If I open Explorer the network drive is shown with a red "X" through it. If I click the network drive, it connects and displays the contents without an issue. If I run any application that needs files on that drive before clicking it in Explorer, it will say the resource is unavailable.
What appears to be happening is Windows tries to reconnect to the drive before the network connection is reestablished. I believe this to be the case because the network icon in the system tray is still showing the animation for establishing the network connection when the message pop's up. There is no issue with authentication or password's, etc., as the drive connects as soon as I click on it.
My question is, does anybody know of a way to set the mapped drive reconnection farther back in the boot sequence or add a longer wait state to it so it doesn't time out before the network connection is reestablished.?
View 4 Replies
View Related
Jan 20, 2012
I mapped a drive from the server to my workstation. Then I created a shortcut to the exe file. When I launch it, it tells me the file cant be located. I have full admin rights.
View 2 Replies
View Related
Jul 12, 2009
Not sure when or why it happens but about 5 shortcuts I have on the desktop to mapped drivesfolders will disappear. Everything else is fine. X64 7264.
Any ideas?
View 9 Replies
View Related
Feb 20, 2011
Ok, here is a problem I have been having lately and it is driving me crazy. I have a network with a server running 2008 Standard R2 and 4 workstations using Windows 7 Professional 64-bit. I also have 1 other station using Windows XP Professional. The software I run off the server is installed as a client install on the workstations and have to use a mapped drive of E: to let the software see the database. Every 6 to 8 hours of non use of the software... when I reopen it I get a not responding and it has to close and reopen. I looked at the mapped drives and the E: drive disconnects but after opening the E: Drive up it connects right away and then the software works fine. I have tried a lot of things people are saying online. I have disabled autodisconnect -1 in the registry and turned off power management on the Ethernet port. I get the following message when I look at the event viewer.
Event 1005, Application Error"Windows cannot access the file for one of the following reasons: there is problem with the network connection, the disk that the file is stored on, or storage drivers on tihs computer may be missing."But here is the kicker... The windows XP Professional works all the time with no problems so it has to be Windows 7. I have the IPs static in the NIC properties and using the DNS of 8.8.8.8 and 8.8.4.4 which is Google. I was using 192.168.0.100 which was the IP of the server but that didn't make a difference.I gave a lot of details to weed out the normal postingAlso I have DHCP and DNS turned on the server if that would be any possible issue that is causing. I don't know beings I put Google as the DNS if routing in the software would be an issue?
View 3 Replies
View Related
May 25, 2011
I have the problem of a long list of redundant mapped network drives without drive letters, for example, documents, documents~1, documents~2, etc. all with same location...right clicking on the mapped does not present any "disconnect" option.Oh, they do not appear as mapped network drives under "My Computer," but under "Network" and the name of the computer (which is on a wireless network with another computer)...I can go to advanced sharing and stop sharing, but then all folders are unshared including the original...I guess this may be the only way of getting this corrected, but it seems like a long way to do something that should be very simple..
View 4 Replies
View Related
Jul 15, 2011
1. Two Windows 7 computers.
2. Each computer has a user account with the same name, but different passwords.
3. This is necessary because other users can log on remotely to one machine with this user account, but should be locked out of the other.
4. A local user who has access to both accounts tries to access a mapped drive on one machine. The user names are the same, but the passwords are different. Windows gives an error; the local user enters the credentials correctly (same username, but remote machine password) and says "Remember these credentials."
5. Credentials are remembered throughout the duration of the computer session.
6. When the computer is rebooted, the computer forgets the credentials for the mapped drive, and Step 4 starts all over again.
How can the local user save the remote credentials permanently? And is it possible without using Group Policy Preferences, as he is not on a domain?
View 1 Replies
View Related
Aug 6, 2011
I have a External PVR unit that is connected to our home Theatre system and we watch downloaded movies that are stored on it's hard-drive.. This box is also connected via UPNP and I can see ALL Drives attached to my laptop which is located upstairs in the study...I was able to, from the computer, map this drive (N Drive) and was able to copy the movies files directly to the hard-drive of the PVR.Until recently, I was able to create new folders on the PVR hard-drive and then copy the files, but am no longer able to do so as I keep getting an error msg stating:"Could not create new file N:Moviesxxxxxx. The system cannot find the file specified"I can however copy the movie files or any other files directly to the hard-drive (ANY FOLDER).. Just cannot create any new folders!!!! Which I was able to do previously.?
P.S. I am running Windows 7 Ultimate x32 on a Toshiba Satellite Pro P300
View 5 Replies
View Related
Nov 14, 2012
I have a windows 7 desktop with an SSD and regular mechanical hard drive where I keep my data. I also have a laptop with a small SSD as well. I want to keep the laptop free of non-critical data so I decided to setup a file share between my desktop (Windows 7 home prem) and my laptop (Windows 7 pro). I was able share the files and navigate to my desktop through my laptop. I successfully mapped the folder as a network drive and all was well. Then I rebooted and I was disconnected from it, it remembered that it was there but I needed to manually connect to it and I needed to provide my login credentials. There is no password just a username. Also is there a way to set a timeout because if my desktop is not on and I want to use my laptop, the boot times are much longer compared to when I don't have the mapped network drive on my laptop at all.
View 9 Replies
View Related
Nov 26, 2012
I am working with a Dropbox account on my Domain, and ideally I would like to make my "local Dropbox folder" on a mapped network drive. When I attempt to do so I am met with the following error - [URL]
View 1 Replies
View Related
Oct 12, 2011
I've read that with the mklink command one can create symlinks in windows to mapped network drives. still, whenever I add such a drive as a parameter to the command, I get the error "the file or directory is not a reparse point".What could be the problem? Is there another way to create a symlink on a network destination?
View 3 Replies
View Related
Jul 25, 2012
I have a problem with the speed of my mapped network drive. At first al is wel and file loading is as fast as to be expected. But after some time the transfer speed drops dramaticaly and it becomes very slow. I tested it primaraly with loading of image sequences, but it affects all file loading the same. If I logoff and login to windows again the speed is back to its full potential. And then after some time again it drops. I have seached the internet for similar ploblems, but could not find this kind of problem, only the dropping of the connection entirely, but thats not the case here.
All user PC's that have the network drive mapped are windows7 Pro PC's with gigabit lan. The server PC is also windows7 with quad gigabit lan, teamed to 1 connection. A 4 ssd raid setup via a MSI megaRaid controller provides the drive for mapping. The switch is a HP proCurve 1810G-24. Jumbo frames is disabled on all devices. Because i have no domain, the password protection for file sharing on the server is disabled, so al user PC's can connect to the mapped network drive with their own username.
Is there some sort of idle timer on the mapped network drive that could be responsible or something?
View 1 Replies
View Related
Mar 27, 2012
I am running virtual XP mode in WIn 7. In XP I am able to map a drive G: that is from Win 7 mapped drive (Microsoft Terminal Services). Great, in Explorer you can see the mapped drive.I need to set up an ODBC connection to a database on that drive. No problem I thought.When I need to select a drive in the Select Database window, I cannot see that drive, only A:, C:, D: , the default drives, G: is not shown
View 2 Replies
View Related
Jan 10, 2013
Windows 7 Home Premium - fully updated. I mapped a drive Z: and disconnected it but it still appears. Nothing I have tried works. I have tried net use many times (with everything else closed down) as follows:
net use z: /delete
net use \sharenameUsers
net use z: \sharenameUsers /delete
net use z: \sharenameUsers * /delete ( ie.I passworded the map)
net use z: \sharenameUsers myactualpassword /delete
Yes I rebooted after net use. Yes I used the actual sharename not \sharenameUsers. Is my net use syntax correct for a passworded map?
View 2 Replies
View Related
May 4, 2009
I'm already asking me a while wether it's possible to deactivate the annoying security warning ("Do you want to run this file") when I run exe files on my samba share.
I put various portable apps there and i want to use them as usual files on the local computer. Is that possible? I don't know exactly for what keywords i should search, so i didn't find anything yet. Thanks, best regards, kappen
View 4 Replies
View Related
Dec 13, 2010
We are having ongoing problems with Windows 7 and mapped drive latency on our network. Our environment is as follows:Multiple servers running Windows 2008 & 2008 R2, some VMware servers (including our file server). Windows 7 x64 came preloaded on a brand new Lenovo think-pad, 4gb memory. This occurs on 4 different laptops. This problem ALSO occurs in exactly the same way on an HP Compaq x64 desktop running Windows 7 32. All systems are fully patched & up to date on SP's. Running IP 4 & 6 on all servers & Windows 7 machines Connected to GB Cisco switch.We run login scripts via GPOs that map drives (with net use commands) to 3 shares on our file-server, drives G, H and S.A fourth mapped drive to an IBM I-series does NOT experience these issues.
In Windows Explorer, mapped drives may or may not appear with red X's, but when clicked on they hang with a spinner and the green bar at the top of Explorer begins to run. This occurs randomly, but usually not right after boot up. It can take over a minute to complete. Also, in Word, which has references to these drives in file locations, file opening and saves can be very slow as it attempts to access these shares.This issue has delayed our roll out of Windows 7.Its unacceptably slow and cannot be used in a production environment.We have tried every suggestion we can find on the Internet:Turned off auto-tuning, indexing, thumbnails, set auto-disconnect to the max (both 99999 and ffffffff). Server & clients. No luck. Changed properties on the mapped drives to optimize for documents...no change.Changes setting on the network cards to disable flow control, set static link speed & duplex. Network drivers have been updated. Even tried using our wireless network and disabling wired connection...no change.All bios and hardware updates are completed...no change.Turned on and off network discovery..no change.
Disabled SMB2 on servers & clients...no change.Disabled firewalls, and unloaded antivirus (Trend)...no change.Safe boot with networking & clean boot with no services other than Microsoft...no change.
View 5 Replies
View Related
Dec 21, 2012
I mapped a drive to my laptop from my desktop to copy 1 folder from the mapped drive.When completed I found files missing from the original that i do not see on either laptop or desktop. Where did they go and how can i get them back?
View 4 Replies
View Related
Jul 15, 2012
From a fresh start up of the computer, I can get my thumbnails to generate any where on my computer, the NAS, or the USB attached to the NAS. However, after a short period (not specific, can be 5 mins or 30 mins), the USB drive attached to the NAS will no longer generate thumbnails, however, everywhere else still does (ie local files or even NAS files).
I have multiple machines, and it happens on this machine only (brand new only 2 weeks old, fresh windows 7 installed only 2 weeks ago).
I am using Windows 7 64bit Ultimate, but so are the other 2 windows 7 machines, and they do not forget to show thumbnail previews after a little while.
- "Always show icons, never thumbnails" from folder options is UNTICKED. - tried all options from here Thumbnail Previews - Enable or Disable - Windows 7 Forums (with everything set to enable thumbnails)
What seems to happen is that it suddenly forgets that thumbnails are enabled, but only for that specific drive. Using the link above, it should always be the first example "EXAMPLE: Thumbnails Enabled in Windows Explorer" but when it decides to stop working it becomes "EXAMPLE: Thumbnails Disabled in Windows Explorer", however, it only effects that one specific USB device attached to my NAS.
It has to be a Windows 7 issue on this machine only, as all my other Windows 7 and XP machines always show thumbnails. As far as I know, all the Windows 7 machines have exactly the same software loaded (I re-formatted them all about 2 weeks ago when the new machine was built).
If I restart the computer all thumbnails are working again until it no longer likes me.
View 1 Replies
View Related
Sep 6, 2010
I just upgraded to Windows 7 Enterprise having had used XP for years. In addition, I have an 8tb server networked with a large collection of movies. With XP, I made each folder a thumbnail (.db file) so that each folder containing the movie would have a picture of the movie cover. My HTPC is still running XP, and of course, can view the thumbnails just fine. With Windows 7, I have tried everything.Basically, i can't get it to show the thumbnail (.db file) which is contained inside each movie folder.I have changed the folder options to "always show icons, never thumbnails" so that it will show thumbnails. I have changed the local group policy editor to make sure that windows has the proper settings. There is even an option to" turn off the display of thumbnails and only display icons on network folders."
View 2 Replies
View Related
Sep 1, 2009
I know how to disable thumbnails system wide and this is not what I want to do.
The problem my system is having is when I place a disc such as an SVCD in the drive and want to copy one of the files. When I go into the folder with the videos, Windows tries to make thumbnails of all the files or at least it tries to gather information on them. The problem is that since it's an optical disc, there is only one laser, so there is a very long explorer.exe freeze while it tries to do so. I guess it is reading a little of each file at a time and trying for all of them at once.
Is there a tweak or a setting I can change without affecting videos stored on the HDDs?
View 0 Replies
View Related
Jan 15, 2013
I have no idea where the thumbnail.db is in an external hard drive connected to a computer running windows 7. Is there is such a thing? does an external hard drive have its own thumbnails, or are they only located on the main disk in the computer?
View 1 Replies
View Related
Sep 24, 2009
I found many tutorials explaining how to pin custom things to the Windows 7 "super-bar"
maybe i read wrong but i didn't found anything about pinning a shortcut from a virtual mapped drive..
so, saying my virtual drive (mapped using net use ..) is R:,
what i want, is to have in my super-bar a shortcut to R:fooar.exe
is this possible ?
View 9 Replies
View Related
Nov 8, 2009
I've set up a dual boot with XP and 7. My mapped drives work fine under XP but on 7 they fail to reconnect at startup. I have made sure I ticked "Reconnect at startup" and I have switched on "Always wait for network at computer start up and logon" in Group Policies but still no good. Any suggestions?
View 1 Replies
View Related
Feb 26, 2010
On my Win 7 system, I have mapped 4 drives to a XP system using the "net use" command. They are mapped correctly as p,q,s,t on the Windows 7 system. They show up in the "Power Desk" app which is a file manager utility program. The mapped drives work correctly in that program.However, they don't show up in explorer on the windows 7 system. All other drives are shown, but not the mapped drives. Also, if I bring up the file open dialog box from an app like notepad, they don't show up either.On another Win 7 system, I can map the drives exactly the same way and they do show up in explorer. It must be a setting that is different on the Win 7 system that does not work.
View 3 Replies
View Related
Jun 13, 2011
We have this recurring issue where some mapped network drives disappear from 'my computer'. They usually appear after 1 or 2 reboots, but having to go through this each time is a bit annoying.Right now all our client computers are running windows 7 pro on a 2008 domain server. We've been having this issue from when we had the 2003 server and its still happening every now and then
View 2 Replies
View Related
