Mapped A Drive On Home Network And Some Files Disappeared In The Original F?
Dec 21, 2012
I mapped a drive to my laptop from my desktop to copy 1 folder from the mapped drive.When completed I found files missing from the original that i do not see on either laptop or desktop. Where did they go and how can i get them back?
View 4 Replies
ADVERTISEMENT
May 4, 2009
I'm already asking me a while wether it's possible to deactivate the annoying security warning ("Do you want to run this file") when I run exe files on my samba share.
I put various portable apps there and i want to use them as usual files on the local computer. Is that possible? I don't know exactly for what keywords i should search, so i didn't find anything yet. Thanks, best regards, kappen
View 4 Replies
View Related
Jan 10, 2013
Windows 7 Home Premium - fully updated. I mapped a drive Z: and disconnected it but it still appears. Nothing I have tried works. I have tried net use many times (with everything else closed down) as follows:
net use z: /delete
net use \sharenameUsers
net use z: \sharenameUsers /delete
net use z: \sharenameUsers * /delete ( ie.I passworded the map)
net use z: \sharenameUsers myactualpassword /delete
Yes I rebooted after net use. Yes I used the actual sharename not \sharenameUsers. Is my net use syntax correct for a passworded map?
View 2 Replies
View Related
May 19, 2012
I run some CAD and compiler software that (unfortunately!) uses absolute path names in project files, so I need to access all my files with exactly the same path for my PC and my laptop. Enventually I want to put all files on an external NAS drive, but only have the PC at the moment.So my first thought was create a folder on my PC, say C:X_Drive, map it as a network drive, say X:, and share the folder as X: on the laptop. Then I'd always access files through the mapped drive, and all paths would be consistent, and moving to an external drive should be trivial.
This sort of works. I've set up the Security tab to give everyone full access. I can read and write the folder itself, but cannot write to the mapped drive version on the same PC, I'm warned I don't have permission. I'm an administrator and the only user on the system. I've tried UNC addressing and direct fixed IP addressing when mapping, no joy. Subst doesn't work properly either (drive comes up as disconnected in explorer, but I believe that's a known Windows bug).
View 1 Replies
View Related
Mar 21, 2011
I'm using XP. I have mapped a network drive to a Windows 7 computer as administrator. I am trying to navigate to Z:UsersMaryPicturesMary's Pictures. But when I navigate to Z:UsersMaryPictures I don't see "Mary's Pictures". I can see "Mary's Pictures" if I'm at her computer.What do I have to do to see all folders and files on Z?
View 6 Replies
View Related
May 25, 2011
I have the problem of a long list of redundant mapped network drives without drive letters, for example, documents, documents~1, documents~2, etc. all with same location...right clicking on the mapped does not present any "disconnect" option.Oh, they do not appear as mapped network drives under "My Computer," but under "Network" and the name of the computer (which is on a wireless network with another computer)...I can go to advanced sharing and stop sharing, but then all folders are unshared including the original...I guess this may be the only way of getting this corrected, but it seems like a long way to do something that should be very simple..
View 4 Replies
View Related
Nov 14, 2012
I have a windows 7 desktop with an SSD and regular mechanical hard drive where I keep my data. I also have a laptop with a small SSD as well. I want to keep the laptop free of non-critical data so I decided to setup a file share between my desktop (Windows 7 home prem) and my laptop (Windows 7 pro). I was able share the files and navigate to my desktop through my laptop. I successfully mapped the folder as a network drive and all was well. Then I rebooted and I was disconnected from it, it remembered that it was there but I needed to manually connect to it and I needed to provide my login credentials. There is no password just a username. Also is there a way to set a timeout because if my desktop is not on and I want to use my laptop, the boot times are much longer compared to when I don't have the mapped network drive on my laptop at all.
View 9 Replies
View Related
Nov 26, 2012
I am working with a Dropbox account on my Domain, and ideally I would like to make my "local Dropbox folder" on a mapped network drive. When I attempt to do so I am met with the following error - [URL]
View 1 Replies
View Related
Oct 12, 2011
I've read that with the mklink command one can create symlinks in windows to mapped network drives. still, whenever I add such a drive as a parameter to the command, I get the error "the file or directory is not a reparse point".What could be the problem? Is there another way to create a symlink on a network destination?
View 3 Replies
View Related
Jul 25, 2012
I have a problem with the speed of my mapped network drive. At first al is wel and file loading is as fast as to be expected. But after some time the transfer speed drops dramaticaly and it becomes very slow. I tested it primaraly with loading of image sequences, but it affects all file loading the same. If I logoff and login to windows again the speed is back to its full potential. And then after some time again it drops. I have seached the internet for similar ploblems, but could not find this kind of problem, only the dropping of the connection entirely, but thats not the case here.
All user PC's that have the network drive mapped are windows7 Pro PC's with gigabit lan. The server PC is also windows7 with quad gigabit lan, teamed to 1 connection. A 4 ssd raid setup via a MSI megaRaid controller provides the drive for mapping. The switch is a HP proCurve 1810G-24. Jumbo frames is disabled on all devices. Because i have no domain, the password protection for file sharing on the server is disabled, so al user PC's can connect to the mapped network drive with their own username.
Is there some sort of idle timer on the mapped network drive that could be responsible or something?
View 1 Replies
View Related
Apr 26, 2010
Lets call upstairs computer "A" (has windows 7 X64), Downstairs computer will be "B"- has windows xp.When I try to copy or move video files (350 MB and above) from"A" to "B", operation starts but hangs after a while and then I get this error:"there is a problem accessing [path of "B" destination directory]. make sure you are connected to the network and try again."This happens when I try to copy files to ANY of my drives on "B" (internal or external). BUT it does not happen when copying small files.There is enough empty space on destination drive.I'm using cable lan (not wireless), and have tplink router (TL-WR64XG).I also tried to reset router settings to factory settings with no luck.
View 8 Replies
View Related
Jul 20, 2011
have win 7 ultimate 64, home network over wifi to my wife laptop, router sisco e3000. CPU : qx9850 (@3800 MHz), VGA Ati 5870, motherboard asus p5q deluxe ( or how this model) 8 gb gskill DDRII 1200 MHz . 3 sataII hdd, case xcilio 1000. All stable and not overheating. Games runs good. BUT! When I start to copy files ( like films, music and etc large one) my entire omg fast crazy pc slow down and become really slow!!! And speed over Ethernet is 2 mb/sec or 2,3. Ok, leve the speed it's Over wifi so w/e. I tried to set up netsh rss enable, autotuninglevel disable, chimney enabled . Did link Speed & duplex auto I can remove ipv6 but home network require it.
View 2 Replies
View Related
Apr 22, 2012
how can i share files securely between my home pc and my laptop via network but only on 1 home pc user?
View 1 Replies
View Related
Sep 24, 2009
I found many tutorials explaining how to pin custom things to the Windows 7 "super-bar"
maybe i read wrong but i didn't found anything about pinning a shortcut from a virtual mapped drive..
so, saying my virtual drive (mapped using net use ..) is R:,
what i want, is to have in my super-bar a shortcut to R:fooar.exe
is this possible ?
View 9 Replies
View Related
Jun 13, 2011
We have this recurring issue where some mapped network drives disappear from 'my computer'. They usually appear after 1 or 2 reboots, but having to go through this each time is a bit annoying.Right now all our client computers are running windows 7 pro on a 2008 domain server. We've been having this issue from when we had the 2003 server and its still happening every now and then
View 2 Replies
View Related
Sep 26, 2011
Windows Server 2008 R2Windows 7 32 BitI have a Windows 7 Enterprise box that when started will only create 2 of 3 mapped network drives. This does not happen every time either, just about 2-3 days of the 5 day work week. 2 of the drives are mapped via a script, while the 1 drive that is the problem child is set through the Properties-->Profile-->Home Folder of the user on our AD box. We have set the drop down letter to H and verified the path. It is correct, as it works some days.
View 8 Replies
View Related
Jul 13, 2012
I want to know if there is anyway to find out if a network shared drive (showing within 'My Computer') is manually connected/mapped. (btw we are using a AD - GPO & Desktop Authority)I don't want to disconnect all the drives and then log the user off as i want to see if there is a simpler way to check this.
View 1 Replies
View Related
Nov 17, 2009
I have a problem with mapped network drives disconnecting.
I run Windows 7 Pro connecting to Win Server 2003. Reboot and the drives are there. After a while a red cross appears against them in Explorer. I can usually see the contents, but running a program that requires those resources fails.
The only way I can reconnect is to reboot, but then the red cross appears again after a while.
I've updated the LAN driver and even tried setting the registry key MaxNonpagedMemoryUsage to 0xFFFFFFFF as recommended in the only comment on the subject I've been able to find.
I'd really appreciate some help here as I don't want to go back to XP!
View 5 Replies
View Related
Dec 10, 2012
i need product key for microsoft office home and student 2010
View 5 Replies
View Related
Nov 21, 2011
I decided to connect the xbox to my home network, but when I did so all of the shared files and folders got locked. Being locked I cannot watch the videos or play the music with manually unlocking them first. So is there a way to revert them back to their unlocked state? There has to be an easier way than manually doing it... because I have around 50GB of music... that would take an eternity. Here's a screenshot for reference: [URL].
View 3 Replies
View Related
Jan 19, 2012
Printer plugged into Win7 box - how to print from remote XP machine? describes an original difficulty I had getting remote computers (laptops and desktops) to print to a USB printer connected to my Windows 7 box. Read far enough and you'll see that I solved that problem using Networking issue - Win7 printer, XP remote machines.Fast forward 13 or so months. Since that time I have replaced the printer, I've had a motherboard and processor issue with my box (since fixed), and no interruption of things working as they should. My printer - Canon ip4800 series - is USB hardwired to my Windows 7 computer, and the other home computers - two Windows 7 laptops, an XP box, and an XP netbook - can print to the printer, and view files on my Windows 7 machine, over our wireless home network. And that's been constant through the changes described.
Then yesterday, for no known reason, my daughter's Windows 7 laptop stopped being able to print. She'd send jobs to the correct printer, but they'd just queue up, with the queue visible from her machine, but not when I looked at the printer from my machine (that is looking at the print queue from her machine shows the jobs, but looking at it from mine shows no jobs).Nothing I did would result in stuff from her machine, from any application, to go to the printer.I finally deleted the printer from her machine, figuring I'd just add it back.I try adding a printer to the laptop, it doesn't find the printer on the list of available printers. When I try adding it by typing the name - \mywin7canon ip4800 series - that fails.When I look at "network" from her laptop, my computer shows up, but if I click on it, Windows says it can't connect.
When I type ping her_computer from a DOS box, it can't find it - but when I type ping any_other_computer it finds those.Her laptop can get on the internet from our home wireless network. All the other computers in the house - Windows 7 and XP - can access shared files on my PC, and more importantly, print across the network to my USB printer.Please, patiently and precisely, guide me through stuff to check on my PC and her laptop, to get this working again. I've been through the network and sharing center on my PC and the settings are correct.Again, as it is right now, my printer is not defined on her laptop.Final, cro-magnon- level question here: If I did a system restore on her laptop, back to a point when it had been able to print, might that fix things?
View 5 Replies
View Related
Jun 9, 2012
I have 2 laptop that I need network it? First laptop Lenovo Y460 and second Dell 5110. First connect with a LAN Cable. Then I goto Local Area Network both laptop and set IP.
Lenovo = IP 192.168.1.1
Gateway = 192.168.1.2
Subnet mask 255.255.255.0
Dell = IP 192.168.1.2
Gateway = 192.168.1.1
Subnet mask 255.255.255.0
I goto change advanced sharing setting: (in both laptop)
- Turn on Network Discovery
- Turn on file and printer sharing
- Turn off password protection
But I can goto to another laptop isn't name computer alfa1. I goto run \alfa1. But don't access to it! Also I'm a administrator. My OS is Windows 7 home premium and another system Windows 7 Ultimate.
View 1 Replies
View Related
Jan 12, 2013
In our company, we are using Windows 7 and my goal is to prevent users (also administrators) of specific workstations from running executables which are located on mapped network drives (servers).I tried different things (e.g. Software Restriction Policies or Applocker => in both cases I tried the UNC address as well as the drive letter to set up the rules) but nothing worked.
View 9 Replies
View Related
Jun 25, 2012
Long story short, I have shares on three PCs that are not always on. If I make a shortcut to the share and put it on my desktop, sometimes for some reason, the shortcut vanishes. I believe this is because I haven't connected the PC to the network in a while.
So, I went about and mapped those shares to drive letters. All is well, however, it adds another 45 seconds to my boot time.
Pretty sure this is because windows is trying to reconnect to them on boot, but they are disconnected. Is there any way to keep my drive mappings, but not have windows attempt to reconnect on boot?
I know that you will lose your mappings if you do not check "reconnect on login".. so, is there a way to keep the mappings without attempting to reconnect at login?
View 2 Replies
View Related
Sep 7, 2011
I'm having problems with Windows 7 whereby the usual mapped network drives we used to use in Windows XP don't quite work as they should in Windows 7. When double clicking the drive to view their contents, it takes me to my home page.Right clicking the drive shows Install/Setup in bold text as the first/default option for double clicking.There is a program on the drive in question but i don't want it to install that program, i just want it to display the contents of the drive.I suppose what I'm trying to ask is: Is there a way I can change the default action for double clicking this particular drive?
View 1 Replies
View Related
Dec 14, 2011
When I upgraded from XP (a long time ago) I deleted all the thumbs.db files. I can see thumbnails on my local C: drive. If I browse my network drive I can see thumbnails.
But I have also mapped my network drive as Z:. If I browse the mapped drive I can't see thumbnails.
Can anybody confirm that they can/cannot see thumbnails on mapped drives that don't contain thumbs.db.
Folders don't initially incorporate Folder.jpg into their thumbnail. If I browse into the folder I can see the thumbnail for Folder.jpg only. If I then return to the parent folder the folder now incorporates Folder.jpg into it's thumbnail.
View 5 Replies
View Related
Dec 14, 2009
I run a small network in my business. The software I use is perfectly adapted to my use, but it is written in DOS Basic. This limits my access to network devices.
Until now using windows XP, I solved this problem by choosing one hard drive (C) as my server drive and mapping a (Z) virtual drive in every computer to that (C) drive.
I can access and update info in the server (C) drive from any computer, once I have shared and established permission levels. I share the root of the (C) drive, so everything is accessible.
Now I try this with Windows 7 and I cannot access the server (C) drive from the virtual (Z) drive from my programs, although I can see the (C) drive when I open the (Z) drive.
I have tried every possible level of permission settings, and still no luck. My question is this ...am I missing something here, or is it just impossible to do this in Windows 7?
View 0 Replies
View Related
Oct 8, 2012
5 month old Dell XPS 8500 Win 7 64 bit Pro as main computer connected by Wired Adapter, Upgraded Gateway 5632E also running Win 7 64 bit pro as second connected by Wireless. Both running Kapersky successfully. no network problems for 5 mo.
Both were successfully linked using homegroup. Had to take Gateway to a remote location to do a business demo. While there had to link to a local public WiFi. While connecting made mistake and left homegroup.
When Gateway returned to homebase a few days later it was fine, had no problems finding wireless but could not see or rejoin Dell machine homegroup. It would let me set up a new homegroup.
Went to Dell box and found 1) homegroup no longer existed, 2) router and network and wireless printing no longer found - Red X on the taskbar) even though internet was still working fine.
Took nearly a week of trying differernt fixes, on adapter- off adapter- different adapter reboot network, router, even updated router firmware (Yes I went through every ipconfig reset, renew, redecorate etc. I've used netsh functions to try to get evrything to reset. Changes services.msc settings per other posts. Finally in desperation, deleted every sub key in the registry related to network locational awareness and got the Dell to find the network, let me set it up as a "home" network and then even see the invitation to join the Gateway's homegroup.
Then I hit a wall- when I try to join- Win 7 says I can't join the homegroup because the network is not a "home network". Of course troubleshooting is useless and goes into an endless loop. Have searched in desperation for any way to make Win 7 return to a clean slate so it can sense that it really is on a home network without success. Applied the fix-it and hotpatch for when Win 7 gets stuck in public mode. No joy. Deleted the hide wizard subkey as suggested elsewhere. No Joy. Gut feeling says problem must lie in the NLA or peer networking somewhere but where?
Does anyone know of a method or set of steps (short of a clean reinstall of Win 7) to completely clear every thing the OS knows about my network and force it to acknowlege my network is a home network? Is there a registry hack that will clear the problem?
I know I could abandon the homegroup and do conventional file/print share but I am concerned that using that solution won't last as whatever is screwing up the homegroup could eventually screw regular sharing and then I'm back to reformating/reinstalling. I'm just about ready to join the Apple folks so I never have to work on Windows again.
View 2 Replies
View Related
Oct 28, 2009
I use the subst command to map my d:downloads to A:
In windows XP recycle bin moved any deleted files from A: to the bin, but in windows 7 it doesn't. I can drag the files from the a: to the destop or another drive, then delete them from there to be stored in RB (just in case i need to restore them) but anything deleted from the A: is just deleted.
any ideas how to make the RB recognise a mapped (virtual) drive?
View 4 Replies
View Related
Nov 16, 2009
Still showing up under My Computer. Anyone else have this problem? Suggestions?
View 2 Replies
View Related
Dec 16, 2009
I have a mapped drive that goes to a folder on my internal drive. when my computer starts up the drive will not connect automatically, but connects as soon as I click on it.
I have tried to recreate this drive a few times and always click re-connect on logon but it does not help.
It did work fine for a period so I presume i have done something to stop it working, but can't think what.
I think it may be a setting in my start up configuration (I manage this through CC Cleaner), but can't see what i've switched off.
any ideas?
View 3 Replies
View Related