Cannot Copy Files Over Home Network?
Apr 26, 2010
Lets call upstairs computer "A" (has windows 7 X64), Downstairs computer will be "B"- has windows xp.When I try to copy or move video files (350 MB and above) from"A" to "B", operation starts but hangs after a while and then I get this error:"there is a problem accessing [path of "B" destination directory]. make sure you are connected to the network and try again."This happens when I try to copy files to ANY of my drives on "B" (internal or external). BUT it does not happen when copying small files.There is enough empty space on destination drive.I'm using cable lan (not wireless), and have tplink router (TL-WR64XG).I also tried to reset router settings to factory settings with no luck.
View 8 Replies
ADVERTISEMENT
Jul 20, 2011
have win 7 ultimate 64, home network over wifi to my wife laptop, router sisco e3000. CPU : qx9850 (@3800 MHz), VGA Ati 5870, motherboard asus p5q deluxe ( or how this model) 8 gb gskill DDRII 1200 MHz . 3 sataII hdd, case xcilio 1000. All stable and not overheating. Games runs good. BUT! When I start to copy files ( like films, music and etc large one) my entire omg fast crazy pc slow down and become really slow!!! And speed over Ethernet is 2 mb/sec or 2,3. Ok, leve the speed it's Over wifi so w/e. I tried to set up netsh rss enable, autotuninglevel disable, chimney enabled . Did link Speed & duplex auto I can remove ipv6 but home network require it.
View 2 Replies
View Related
May 12, 2012
Machine spec is:
Asus Rampage IV
16Gb Kinston HyperX
SH103s3 120GB SSD
Barracuda 2Tb
When I ONLY play game OR ONLY copy files, everything is OK. But, when I try to force machine to copy AND play game in the same time, system crash.There is a 2 minidump files, one i tried with Skyrim, other With Fallout.
View 5 Replies
View Related
Apr 22, 2012
how can i share files securely between my home pc and my laptop via network but only on 1 home pc user?
View 1 Replies
View Related
Dec 21, 2012
I mapped a drive to my laptop from my desktop to copy 1 folder from the mapped drive.When completed I found files missing from the original that i do not see on either laptop or desktop. Where did they go and how can i get them back?
View 4 Replies
View Related
Nov 21, 2011
I decided to connect the xbox to my home network, but when I did so all of the shared files and folders got locked. Being locked I cannot watch the videos or play the music with manually unlocking them first. So is there a way to revert them back to their unlocked state? There has to be an easier way than manually doing it... because I have around 50GB of music... that would take an eternity. Here's a screenshot for reference: [URL].
View 3 Replies
View Related
Jan 19, 2012
Printer plugged into Win7 box - how to print from remote XP machine? describes an original difficulty I had getting remote computers (laptops and desktops) to print to a USB printer connected to my Windows 7 box. Read far enough and you'll see that I solved that problem using Networking issue - Win7 printer, XP remote machines.Fast forward 13 or so months. Since that time I have replaced the printer, I've had a motherboard and processor issue with my box (since fixed), and no interruption of things working as they should. My printer - Canon ip4800 series - is USB hardwired to my Windows 7 computer, and the other home computers - two Windows 7 laptops, an XP box, and an XP netbook - can print to the printer, and view files on my Windows 7 machine, over our wireless home network. And that's been constant through the changes described.
Then yesterday, for no known reason, my daughter's Windows 7 laptop stopped being able to print. She'd send jobs to the correct printer, but they'd just queue up, with the queue visible from her machine, but not when I looked at the printer from my machine (that is looking at the print queue from her machine shows the jobs, but looking at it from mine shows no jobs).Nothing I did would result in stuff from her machine, from any application, to go to the printer.I finally deleted the printer from her machine, figuring I'd just add it back.I try adding a printer to the laptop, it doesn't find the printer on the list of available printers. When I try adding it by typing the name - \mywin7canon ip4800 series - that fails.When I look at "network" from her laptop, my computer shows up, but if I click on it, Windows says it can't connect.
When I type ping her_computer from a DOS box, it can't find it - but when I type ping any_other_computer it finds those.Her laptop can get on the internet from our home wireless network. All the other computers in the house - Windows 7 and XP - can access shared files on my PC, and more importantly, print across the network to my USB printer.Please, patiently and precisely, guide me through stuff to check on my PC and her laptop, to get this working again. I've been through the network and sharing center on my PC and the settings are correct.Again, as it is right now, my printer is not defined on her laptop.Final, cro-magnon- level question here: If I did a system restore on her laptop, back to a point when it had been able to print, might that fix things?
View 5 Replies
View Related
Jun 9, 2012
I have 2 laptop that I need network it? First laptop Lenovo Y460 and second Dell 5110. First connect with a LAN Cable. Then I goto Local Area Network both laptop and set IP.
Lenovo = IP 192.168.1.1
Gateway = 192.168.1.2
Subnet mask 255.255.255.0
Dell = IP 192.168.1.2
Gateway = 192.168.1.1
Subnet mask 255.255.255.0
I goto change advanced sharing setting: (in both laptop)
- Turn on Network Discovery
- Turn on file and printer sharing
- Turn off password protection
But I can goto to another laptop isn't name computer alfa1. I goto run \alfa1. But don't access to it! Also I'm a administrator. My OS is Windows 7 home premium and another system Windows 7 Ultimate.
View 1 Replies
View Related
Nov 11, 2011
What is the best free program that can copy discs to ISO files and also burn them, even if they are copy protected?
View 4 Replies
View Related
Oct 8, 2012
5 month old Dell XPS 8500 Win 7 64 bit Pro as main computer connected by Wired Adapter, Upgraded Gateway 5632E also running Win 7 64 bit pro as second connected by Wireless. Both running Kapersky successfully. no network problems for 5 mo.
Both were successfully linked using homegroup. Had to take Gateway to a remote location to do a business demo. While there had to link to a local public WiFi. While connecting made mistake and left homegroup.
When Gateway returned to homebase a few days later it was fine, had no problems finding wireless but could not see or rejoin Dell machine homegroup. It would let me set up a new homegroup.
Went to Dell box and found 1) homegroup no longer existed, 2) router and network and wireless printing no longer found - Red X on the taskbar) even though internet was still working fine.
Took nearly a week of trying differernt fixes, on adapter- off adapter- different adapter reboot network, router, even updated router firmware (Yes I went through every ipconfig reset, renew, redecorate etc. I've used netsh functions to try to get evrything to reset. Changes services.msc settings per other posts. Finally in desperation, deleted every sub key in the registry related to network locational awareness and got the Dell to find the network, let me set it up as a "home" network and then even see the invitation to join the Gateway's homegroup.
Then I hit a wall- when I try to join- Win 7 says I can't join the homegroup because the network is not a "home network". Of course troubleshooting is useless and goes into an endless loop. Have searched in desperation for any way to make Win 7 return to a clean slate so it can sense that it really is on a home network without success. Applied the fix-it and hotpatch for when Win 7 gets stuck in public mode. No joy. Deleted the hide wizard subkey as suggested elsewhere. No Joy. Gut feeling says problem must lie in the NLA or peer networking somewhere but where?
Does anyone know of a method or set of steps (short of a clean reinstall of Win 7) to completely clear every thing the OS knows about my network and force it to acknowlege my network is a home network? Is there a registry hack that will clear the problem?
I know I could abandon the homegroup and do conventional file/print share but I am concerned that using that solution won't last as whatever is screwing up the homegroup could eventually screw regular sharing and then I'm back to reformating/reinstalling. I'm just about ready to join the Apple folks so I never have to work on Windows again.
View 2 Replies
View Related
Mar 17, 2012
How can I get Windows 7 to name copied files using the scheme "Copy of" (used in Windows XP and earlier) instead of the default scheme "- Copy", whenever a file is copied to the same directory as the original file?In other words, if you copy a file named "Foo.txt" in a directory to the same directory, Windows XP would have named that file "Copy of Foo.txt", but Windows 7 names the file "Foo - Copy.txt". I want the copy to be named "Copy of Foo.txt".There are several reasons why I prefer the XP style file name:
1. It is familiar :-)
2. I have existing files that use the XP style file names, and I want all my file copies to use the same naming scheme. I guess I can do a massive file rename across all my backups, but that would solve only one of my problems.
3. Most of my folders are sorted by name, and using XP style would sort all copies together. On other forums it has been suggested that one can simply sort by date (to get the copies sorted together), but that advice assumes that all copies are created after all other files are created, which is actually not often the case.
4. I often work with long file names, which means that the end of the file name is often obscured, unless I have wide windows (not always possible) and use lots of horizontal scrolling every time I want to select a file. Hovering over a file to get its full name is a cumbersome solution.
5. On other forums some have given the advice to always make copies in subfolders, but I often make copies or copies of copies while I work (it allows me to roll back or to check earlier versions of a file quickly, during my work), and using subfolders would slow me down tremendously (not to mention confuse me).
I know that when TeraCopy is made the copy handler, it renames files in a different way than Windows 7 does, though unfortunately not the way Windows XP did it. Also, if one installs a third-party directory program such as Opus, it asks for a file name every time a copy is made, but I need something that simply names the file correctly immediately.
View 1 Replies
View Related
Jun 12, 2011
I'm reimaging one of my home systems that I intend to use as a "sterile" system (I will visit very a very limited selection sites on it, such as banking sites). I'm considering establishing the network location as "Public" instead of "Home", rationale being this would help prevent cross infection from other computers on my home network if they get a worm or virus. I do have friends that come over and hop on my network sometimes and who knows what contamination their systems have. Is this being overly paranoid? Will it cause annoying problems for this sterile system or other systems in my home network? I don't intend to share anything on this system with other computers on my home network. Seems to me that this ought to be the recommended setting for any computer always ... you can always share files using a USB drive if you really need to. Thoughts? Again maybe I am being overly paranoid. Back in the day there used to be worms that would look for ways to hop from system to system over the network, maybe that's much much harder these days. I do have a router between the DSL modem and my home network and I do run Norton Internet Security on all my systems?
View 2 Replies
View Related
Nov 9, 2011
Can you run the same copy of Windows 7 on two home PC's?
View 4 Replies
View Related
Jan 13, 2013
I recently bought a copy of Window 7 Home Basic. But all my friends and everybody I know that owns a computer have a pirated version of windows running on their computers (Third world problems).I recently read somewhere that pirated Windows CD are backdoored and viruses are installed with windows installation. Is it true? Is it possible for an attacker to do something like that?
View 7 Replies
View Related
May 20, 2012
I am trying to load a new copy of home premium windows 7. A new partition has been formed from the whole disk and formatted The program starts to download the windows 32 files then on reboot it stalls and reverts to a load in safe mode/command prompt etc a blue screen flashes on for one second unable to pause it and read.The PC has had window 7 on before but it crashed and corrupted hence the rebuild so it is windows 7 ready.I have run all the hardware diagnostics ok they came with the Compaq PC.I have tried to install on to a brand new out of the box hard drive same problem.I have successfully installed window xp on the original disk this has loaded ok.This disk was used ok to install windows 7 originally..I am beginning to think the disk is faulty but it does download a lot of files could it be corrupt.
View 8 Replies
View Related
Jan 9, 2013
I had to reinstall my OS due to a hard drive failure about a month ago. When I did I used the re-installation disk that came with computer. Everything was fine until yesterday. Out of nowhere I am getting a message that my copy of Windows is not genuine. I tried system restore and used a restore point that was created right after I installed the OS. Still no good.
View 7 Replies
View Related
Dec 16, 2012
how do I make a copy of my window 7 home premium disk? I have 8 new CD-R 700MB blank disk will that work for them ?
View 2 Replies
View Related
Nov 4, 2011
I just got a new Windows 7 home premium x64 box at home and I'm going through the mundane task of setting everything upIs there any easy way to copy all or some of my settings to other accounts on this PC? It is a real pain to help other family members when all of their settings are different. If I could just clone everything that would be fine or if you can only copy certain application settings that would be better than nothing.
View 4 Replies
View Related
Jun 26, 2012
I have a laptop ASUS G60JX and it came with Windows 7 Home Premium OEM Pre-activated, so unfortunately i have formatted it now i want to install a WINDOWS 7 HOME PREMIUM X64 BIT OPERATING SOFTWARE, so which one should i download a RTM version or OEM version, because i want to download a copy of windows and then i will use my genuine key which is installed under my laptop, reply asap.
View 1 Replies
View Related
Feb 26, 2010
I am currently planning on upgrading one of my PC's that has a genuine retail version of 64-bit Win7 Home Premium installed.
I am planning on replacing my ageing (E5200/P35/DDR2/HDD) hardware with fresh stuff (Core i3 530/H55/DDR3/SSD).
The way I understand it is that if I were to just replace my MOBO and CPU I could just plug my old hard drive into the new mobo and use the windows disc to repair any problems it may have. However, I am planning on upgrading to an SSD as well.
My question is this, if I make a bare metal backup of Win7 off my current hard drive onto the SSD using something like Clonezilla, and then boot off the SSD once my new system is built, will there be any issues that the Win7 disc won't solve? I don't want to get all this new kit just to find I need a new OS as well.
Anyway, I hope that makes sense.
EDIT: I should add that I currently have 3 hard drives but I only have my OS on my primary hard drive so backing up my music etc isn't an issue. The SSD I'm getting is 64GB so should be fine for Win7 Install.
View 2 Replies
View Related
Aug 9, 2011
I'm having difficulty trying to get my new Windows 7 pc set up to share files across my existing home (wired) network which consists of 1 desktop pc running WinXP and 1 laptop running WinXP.I want the 'C' drive on each of the 3 computers to be shared. I've had the 2 Windows XP computers set up and working like this for several years without a problem but I can't seem to get the 'C' drive on the Windows 7 computer to do the same.All 3 computers have the same workgroup name and none of them require passwords to log on to Windows. There are no problems with the firewalls on any of the machines.On the Windows 7 PC when I right click on the 'C' drive and select the 'Sharing' tab, I have set this up to be shared and when I click on the 'Advanced Sharing' button there is a tick in the 'Share this folder' box, the 'Share name' is 'C'. If I then click on the 'Permissions' button, this shows a 'Group or user name' 'Everyone' and this group has Full Control, Change and Read boxes ticked. As far as I can see there is nothing more I can do.
However from my Windows XP computer, when I go to My Network Places and double click on the icon for the Windows 7 'C' drive, I get the message "\Computername is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.The network path was not found"I've subsequently set up a sub folder (of the Windows 7 'C' drive) for sharing by right clicking on the folder, choosing 'Share with' and then selecting 'Specific people'. I then set up a group called 'Everyone' with read/write permissions. Now I can navigate to this folder from my 2 WinXP computers.
View 2 Replies
View Related
May 14, 2012
Unable to see home network computers in Windows Explorer Network screen.
I have a home network with 2 laptops and 1 desktop. The desktop I use as a "file server" in that all work done on the laptops is stored to the desktop. The desktop computer name is HAL. One laptop is fine and sees the network. The other just stopped seeing it; rebooted the laptop; rebooted HAL; did a number of refreshes without any luck. I opened EXCEL and found a worksheet that was listed that I knew was saved on HAL. Was able to open the file and when I tried the SAVE AS I could navigate through all of HAL just as normal. Went to Windows Explorer and still no HAL listed as a COMPUTER on the NETWORK. I have a internet connection so I know I am making it to the router at least. And when I check NETWORK AND SHARING CENTER it shows an active home network. The laptop is running Windows 7 Home Premium Service Pack 1 Build 7601.
View 4 Replies
View Related
Aug 17, 2011
I have Windows 7 Home Premium legal version installed on my pc. I just seen a message popping up stating that Evaluation copy build 7601 will expire in 14 days.Some time ago I had a hdd crash and had to install new hdd. Original Windows 7 could not be installed due to hardware change and I contacted Microsoft Thailand on June 7 whom connected me toSingapore/HongKong?The helpdesk had me check product key with slui.exe 4 and I had to give all numbers. She than gave me new numbers to put in A to G boxes and Windows 7 could be installed and is working fine since.
View 9 Replies
View Related
Aug 30, 2012
Home network with Wifi and ethernet. Using 3x Notebooks and 3x workstations. One of the workstations (W7 ultimate) keeps changing between Public and Home. When this happens, the internet connection dies. I cannot see other workstations either when on public network. Workstation using wifi. Does the same on cable. When it changes to Public, it disconnects from the internet and I cannot get to the router even though it has the workstation has an IP(DHCP or static). Default gateway and subnet is correct. TCP v4 is being used and nothing else is enabled.
Why is this happening?
- I have tried DHCP as well as Static addresses
- Reconfigured NIC(Netgear WG311T), uninstalled and reinstalled it.
- Removed Wifi connection and re-added it.
- Changed auth type, encryption type and keys to connection
Have I covered everything? The only thing different is that I installed a new router - Duo Plus 300wr. It cannot be the router because all the other notebooks connect to it wireless and so does my iPad, Android device and tablet...so it rules that out?
View 3 Replies
View Related
Oct 30, 2009
I'm trying to move all our data into one location. A lot of the files we have are duplicates and some have been modified. Is there a way that I can tell windows to copy all the files that are not already in the destination and if it encounters the same file to create a copy(2) if the file is newer and if not newer then not copy. I want to be able to keep the original file also and make a second copy of the newer. Right now when I copy I have to look to see if the file is newer or not and tell it to rewrite, do nothing, or keep both and create second file. Any way to automate this? I have a lot of files to manage and I'm not the one who created them so I need to have bot copies.
View 8 Replies
View Related
Jan 14, 2010
How to Set the Windows 7 Network Location Type ?
View 0 Replies
View Related
Jan 20, 2011
New windows 7 Home Premium desktop that can print when the printer is directly connected but can't print when the printer is connected to an XP pro pc. It can see it but we're getting a "driver cannot be found on the network" flag.
View 9 Replies
View Related
Oct 22, 2009
Okay so I've installed windows and everything is working okay except i can't connect my laptop to my computer via LAN because it won't let me change it to a HOME NETWORK. It is just gets set to an unidentified Network. any possible suggestions?
Also I've look at removing this from the services but its not running it when i go under task manager, unless it somewhere else.
"##Id_String2.6844F930_1628_4223_B5CC_5BB94B87 9762 ##"
View 1 Replies
View Related
Mar 19, 2011
I own a WD Passport (320GB). I'm having problems in copying files from my PC to the HDD. It was working fine a few days ago but I can't seem to copy any file though I can easily read the files stored at a very high speed. But the problem is probably with my computer since I can copy files from my laptop without an itch.
P.S. I use Windows 7 32-bit on both PC and laptop.
View 9 Replies
View Related
Feb 7, 2010
I'm trying to copy a series of files from my old XP machine to the new Win 7 machine. I've turned off User access control, I made myself the owner of the machine, etc., the files on the old machine have no permissions preventing the copying. I am the owner of both machines and there is no firewall blocking the files. About every third or fourth file says I need admin permission to copy it. But I can't figure out how to give myself this permission. Out of 400 in the folder, 296 copied over, the remainer did not. These are not executables, they are machine embroidery files with the file extension ".pes". This is just the first folder I need to copy. I have almost 100,000 of these files that have to be copied and can't afford to lose any.
I can't find anything online that relates to this kind of issue. How do I clear this out so I can get these files copied to the new machine? what criteria Win 7 uses to determine which files it will copy and which require admin permission. Is it the length of the file name? Characters in the filename? The name of the folder they are going into? I would sure hate to have to rename 100,000 files.
View 9 Replies
View Related
Mar 19, 2011
I own a WD Passport (320GB). I'm having problems in copying files from my PC to the HDD. It was working fine a few days ago but I can't seem to copy any file though I can easily read the files stored at a very high speed. But the problem is probably with my computer since I can copy files from my laptop without an itch.
View 3 Replies
View Related
