Pc Getting Slow When Copy Files At Home Group Network

Jul 20, 2011

have win 7 ultimate 64, home network over wifi to my wife laptop, router sisco e3000. CPU : qx9850 (@3800 MHz), VGA Ati 5870, motherboard asus p5q deluxe ( or how this model) 8 gb gskill DDRII 1200 MHz . 3 sataII hdd, case xcilio 1000. All stable and not overheating. Games runs good. BUT! When I start to copy files ( like films, music and etc large one) my entire omg fast crazy pc slow down and become really slow!!! And speed over Ethernet is 2 mb/sec or 2,3. Ok, leve the speed it's Over wifi so w/e. I tried to set up netsh rss enable, autotuninglevel disable, chimney enabled . Did link Speed & duplex auto I can remove ipv6 but home network require it.

View 2 Replies


ADVERTISEMENT

Cannot Copy Files Over Home Network?

Apr 26, 2010

Lets call upstairs computer "A" (has windows 7 X64), Downstairs computer will be "B"- has windows xp.When I try to copy or move video files (350 MB and above) from"A" to "B", operation starts but hangs after a while and then I get this error:"there is a problem accessing [path of "B" destination directory]. make sure you are connected to the network and try again."This happens when I try to copy files to ANY of my drives on "B" (internal or external). BUT it does not happen when copying small files.There is enough empty space on destination drive.I'm using cable lan (not wireless), and have tplink router (TL-WR64XG).I also tried to reset router settings to factory settings with no luck.

View 8 Replies View Related

Can Only Copy/move One Group Of Files At A Time

Jul 15, 2010

Is it just me or has Win 7 stopped the ability to move more than one group of files/folder at a time?

For example, I'm trying to transfer some music album folders to a USB or another folder. I drag and drop the first album in there, but I have to wait to the progress box to finish before I can drag the next one/group in there.

I KNOW this was never a problem with XP, where every group of files/folders your moved/copied would open a new progress box, each doing their own thing. Why would such a basic function have changed?

View 5 Replies View Related

No Home Group To Join On Network

May 6, 2011

I am trying to setup a home group. I have created a Home Group on the main computer which has the printer hooked up directly. The printer is a Brother MFC-425CN. When i try to join the home group from my laptop, it says there is no home group to join on the network.

View 14 Replies View Related

Home-group Changes To Public Network?

Jan 8, 2012

So I have fibre optic broadband and I connect my PC and Xbox 360 together through my PC motherboard LAN connections.To explain what I have done is I have two LAN connections on my EvGA 680i motherboard and I have bridged out these two ports because I find it is is easier connecting the Xbox this way as I don't have to deal with the firewall issues and programme each file to access it and it is just smoother with no dropouts.The problem that I have though is as soon as I start up the Xbox 360 then my PC and any other laptop has this issue.Firstly the two laptops connect wirelessly.As soon as the Xbox fires up firstly it switches on my partners HP DV6000 laptop and this might be because it is a media laptop and has an infra red remote which perhaps frequencies are crossing. I can live with this.The issue is the network.Both my PC and the laptops automatically switch from a homegroup to a public network.

My PC is fine if I reboot, it will revert back to the homegroup but my partners laptop will not. It stays on this public network and so she can't access the internet.I have tried changing and managed to change back to a homegroup but it is confused in that it does not know which homegroup to connect to.I have typed in the WPA code but it does not appear to recognise this as our network.Is it because I have bridged the LAN ports and it is confusing Windows?All are using Windows 7. PC and HP laptop are Ultimate and other laptop is Professional.

View 3 Replies View Related

Reset The Home Group On This Network And Create One For Myself?

Nov 17, 2011

I share my apartment with 5 people and one of them has created a homegroup on the wifi network that we use. And now does not remember the password. i want to be able to create a homegroup and share it with my roommate but unfortunately i cannot create a second homegroup. is there any way i can reset the home group on this network and create one for myself?

View 9 Replies View Related

Two Windows 7 PC's On Home-group, Shared Files Not Appearing?

Nov 8, 2011

I have two computers running windows 7. One is a laptop, one is a desktop. Both are connected to the same router. The desktop is direct wired via ethernet, and the laptop is wirelessly connected.I set up a homegroup and successfully connected both computers to the homegroup.If I share one of the "Libraries" folders on either computer, it instantly shows up in the Homegroup folder where shared items should appear. Any other documents or folders that I share from either computer do not appear, no matter what I try.I right click, choose "share with" and then "homegroup read/write". It doesn't appear accessible from the other computer. I choose "specific people" and then add "everyone," "guest" and "homegroup" all with read/write, and it doesn't appear on the other computer.

View 1 Replies View Related

Acronis True Image Home 11 Network Backup Is Slow

Jun 2, 2012

I support a small LAN with 7 Windows 7 64-bit desktops for a local charity.

All the desktops have Acronis True Image Home 11 (ATI11) installed and are configures as a HomeGroup. I have been doing an incremental image backup over the network using ATI11 to one of the desktops but lately speed of the backups has become unacceptable.

For a specific example, Two of the desktops are Core I7 machines with GBit network interfaces connected through a GBit switch.

a) If I backup one to the other using ATI11 the backup will take 4-6 hours with network utilization at 3-5%.

b) If I backup the SAME system to its secondary HDD using ATI11 (a local backup) the backup takes about 2 hours.

c) If I then use a simple COPY command to copy the large ATI11 TIB backup file (30-50GB) from the SAME system to the SAME target system the network utilization varies from 25%-60% and the copy takes a, relatively speaking, small amount of time.

Note I get the same results for source systems which only have a 100MB network card except that during the COPY test they use 80-90% of the available network speed.

changing the network cards settings, IPV4 Checksum Offload for example. I tried that and it immediately "broke" the HomeGroup network connection. Question: Why will ATI11 not use more of the available network speed? Neither the source system nor the target system is CPU bound during the ATI11 backup, network or local. Aside from Norton Antivirus there are no other non-MS apps running. Disk Queue Length is not excessive.

View 4 Replies View Related

BSOD ONLY When Copy Files Over Network AND Play 3D Game

May 12, 2012

Machine spec is:

Asus Rampage IV
16Gb Kinston HyperX
SH103s3 120GB SSD
Barracuda 2Tb

When I ONLY play game OR ONLY copy files, everything is OK. But, when I try to force machine to copy AND play game in the same time, system crash.There is a 2 minidump files, one i tried with Skyrim, other With Fallout.

View 5 Replies View Related

Share Files Securely Between Home Pc And Laptop Via Network?

Apr 22, 2012

how can i share files securely between my home pc and my laptop via network but only on 1 home pc user?

View 1 Replies View Related

Mapped A Drive On Home Network And Some Files Disappeared In The Original F?

Dec 21, 2012

I mapped a drive to my laptop from my desktop to copy 1 folder from the mapped drive.When completed I found files missing from the original that i do not see on either laptop or desktop. Where did they go and how can i get them back?

View 4 Replies View Related

Can't Set Up Home Group?

Nov 28, 2011

It supposed to be so simple.Trying to set up a homegroup between 2 Windows 7 Pro & Home Prem PCs. Both wired connected to an O2 Router Set up in one but never get the prompt to enter existing homegroup on the other so each PC says it's already in a Homegroup yet they aren't in the same Homegroup.

View 5 Replies View Related

XBox Connected To Home Network - Shared Folders And Files Locked

Nov 21, 2011

I decided to connect the xbox to my home network, but when I did so all of the shared files and folders got locked. Being locked I cannot watch the videos or play the music with manually unlocking them first. So is there a way to revert them back to their unlocked state? There has to be an easier way than manually doing it... because I have around 50GB of music... that would take an eternity. Here's a screenshot for reference: [URL].

View 3 Replies View Related

Laptop Can No Longer Access Shared Printer / Files On Home Network

Jan 19, 2012

Printer plugged into Win7 box - how to print from remote XP machine? describes an original difficulty I had getting remote computers (laptops and desktops) to print to a USB printer connected to my Windows 7 box. Read far enough and you'll see that I solved that problem using Networking issue - Win7 printer, XP remote machines.Fast forward 13 or so months. Since that time I have replaced the printer, I've had a motherboard and processor issue with my box (since fixed), and no interruption of things working as they should. My printer - Canon ip4800 series - is USB hardwired to my Windows 7 computer, and the other home computers - two Windows 7 laptops, an XP box, and an XP netbook - can print to the printer, and view files on my Windows 7 machine, over our wireless home network. And that's been constant through the changes described.

Then yesterday, for no known reason, my daughter's Windows 7 laptop stopped being able to print. She'd send jobs to the correct printer, but they'd just queue up, with the queue visible from her machine, but not when I looked at the printer from my machine (that is looking at the print queue from her machine shows the jobs, but looking at it from mine shows no jobs).Nothing I did would result in stuff from her machine, from any application, to go to the printer.I finally deleted the printer from her machine, figuring I'd just add it back.I try adding a printer to the laptop, it doesn't find the printer on the list of available printers. When I try adding it by typing the name - \mywin7canon ip4800 series - that fails.When I look at "network" from her laptop, my computer shows up, but if I click on it, Windows says it can't connect.

When I type ping her_computer from a DOS box, it can't find it - but when I type ping any_other_computer it finds those.Her laptop can get on the internet from our home wireless network. All the other computers in the house - Windows 7 and XP - can access shared files on my PC, and more importantly, print across the network to my USB printer.Please, patiently and precisely, guide me through stuff to check on my PC and her laptop, to get this working again. I've been through the network and sharing center on my PC and the settings are correct.Again, as it is right now, my printer is not defined on her laptop.Final, cro-magnon- level question here: If I did a system restore on her laptop, back to a point when it had been able to print, might that fix things?

View 5 Replies View Related

Network 2 Laptops (Windows 7 Home Premium / Ultimate) And Share Files?

Jun 9, 2012

I have 2 laptop that I need network it? First laptop Lenovo Y460 and second Dell 5110. First connect with a LAN Cable. Then I goto Local Area Network both laptop and set IP.

Lenovo = IP 192.168.1.1
Gateway = 192.168.1.2
Subnet mask 255.255.255.0

Dell = IP 192.168.1.2
Gateway = 192.168.1.1
Subnet mask 255.255.255.0

I goto change advanced sharing setting: (in both laptop)
- Turn on Network Discovery
- Turn on file and printer sharing
- Turn off password protection

But I can goto to another laptop isn't name computer alfa1. I goto run \alfa1. But don't access to it! Also I'm a administrator. My OS is Windows 7 home premium and another system Windows 7 Ultimate.

View 1 Replies View Related

Can't Add New Computer To Home Group

Aug 20, 2011

I can't add my new computer to the home group of an existing computer. When I attempt to add the new computer I get the message:"Peer networking grouping service not running"

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Ultimate , Service Pack 1, 32 bit
Processor: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz, x64 Family 6 Model 30 Stepping 5
Processor Count: 8
RAM: 3582 Mb
Graphics Card: NVIDIA GeForce GTS 250, 1024 Mb
Hard Drives: C: Total - 476837 MB, Free - 368668 MB;
Motherboard: ASUSTeK Computer INC., Maximus III GENE, Rev 1.xx, 101600270001412
Antivirus: Norton 360 Premier Edition, Updated and Enabled

View 2 Replies View Related

Deleting Someone Else Home-group?

Jul 24, 2012

I just reinstalled windows and wanted to get a homegroup going for my desktop and my laptop. THe problem is some kid in my complex who was friends with my roommate has created one for some random reason and win7 only wants me to join his. Is there a way i can get his homegroup off of my network? or just make a new one all together?

View 5 Replies View Related

Can't Setup The Home-group

Aug 30, 2011

Following the steps in the �Homegroup� tutorial on this site, I reach point 7, where it tells me to click on the �Join now,� button. However, that button doesn�t appear on the screens of either machine that I want to network? Opening the home-group troubleshooter, I get a message telling me that some of the problem is network related (yeah?) and these need to be resolved first. I give the machine its head and it comes back with the response that the computer�s time is out of sync, on both machines. However, clicking on �apply this fix,� brings forth yet another screen saying �Troubleshooter has completed, but was unable to fix all issues and that the problem is that my systems time differs from standard local time? I have visited the bios on both machines and made sure the times are as identical as I can get them. I�ve also checked the time in �control pannel�.

View 9 Replies View Related

Share PC In Same Home-group?

Jul 8, 2012

I have three computers in my homegroup. While I have been successful in sharing folders between two, am unable to do with third one.KR-PC is able to connect with RK-PC. but RK-PC is not able to connect to NUPC-PC This snap shot is from RK-PC. When I put in the homegroup password from NUPC-PC, it says invalid username or bad password.

View 3 Replies View Related

Cannot Join Home Group

Feb 13, 2011

I can create a HomeGroup from either computer but neither computer can join it,when I run the troubleshooter, on either computer, it keeps telling me "All Homegroup computers must have the correct time," however, both computers do have the correct time and time zone (I even tried synching both w/ the internet time).

View 2 Replies View Related

Cannot Create A Home-group

Jul 31, 2009

i have wireless connection to the Internet but i cant create a home-group as i don't have local & Internet connection.

any ideas?

im on windows 7 build 7100

View 8 Replies View Related

Home Group Not Cooperating?

Jan 31, 2013

Installed win8 and now trying to connect to my Windows 7 machine. Windows 7 status is: connection internet, joined, local area connection. Win8 status is internet, not joined, local area connection. So I set up a homegroup on Win 8, have a password etc. Went to Windows 7 and tried to "reset" the home group connection there. Got error messages, " Cannot leave home group and Cannot remove your computer from Home Group" The win 8 error message initially (trying to connect to Windows 7) was "type in the user name and password??" Have no idea what that might be, assuming that is for the Windows 7 home group initial setup long ago. Hence trying to reset it. Other error messages (Windows 7) during this whole process is " Peer network resolution protocal service PNRP or peer network .. service is not (P2pimsvc) running. Also, Peer networking Grouping service is not running". I have most of the settings to ON, network discovery, sharing etc. This kinda stuff reminds me back in the days trying to get a HDD recognized by # cylinders, sectors etc. Right now trying to do a discovery just times out after 3 minutes or so, even thought the windows says may take as much as 90 seconds. If it matters, all machines connect to internet no problems, and the two machines are connected via a network switch

View 1 Replies View Related

Home-group File Transferring?

Jun 3, 2012

so I have a PC and a laptop. Both windows 7 pro. But the PC is 32bit and the laptop is 64. What I am trying to do is transferring a file(video file) FROM the laptop TO the PC. I can see the libraries of the PC and I can access them and also transfer FROM the PC TO the laptop. Now the problem is, when I tried transferring FROM the laptop TO the PC, a pop up window titled "DESTINATION FOLDER ACCESS DENIED" then the message is saying "you need permission to perform this action".I have enabled all possible sharing both in the PC and LAPTOP, to no avail.

View 3 Replies View Related

Windows 7 Home Group Needs PNRPsvc?

Oct 29, 2012

Tech Support Guy System Info Utility version 1.0.0.2[CODE]I have two Gateway computers and I am trying to resolve a problem with homegroup sharing. I ran the network diagnostic and got the following:Either the Peer Name Resolution Protocol service (PNRPsvc) or the Peer Networking Identity Manager service (p2pimsvc) is not running. The Peer Networking Grouping service (p2psvc) depends on both these services to run properly.Then the diagnostic said failed and not fixed.

View 2 Replies View Related

Windows 7 Cannot Leave The Home-group

Apr 12, 2010

My desktop PC is running Windows 7 64 bits. I have already created a homegroup on it. But when I try to view password, system does not show anything there and if I try to change the password to a new one it fails to do! Further I can not also leave the homegroup as the system shows the message 'windows cannot leave the homegroup'.

View 9 Replies View Related

[HomeGroup] Home Group Keeps Setting Itself Up?

Jan 9, 2013

Home group in windows 7 pro keeps becoming active after I leave the home group. After reboot it is active again even after I disabled it. Anyone have any ideas what might cause this. I had to disable it in the services to get it to stop becoming active.

View 2 Replies View Related

Laptop Connects To Web But Not To Home-group?

Jul 2, 2011

I'm running a 3-station LAN (2 desktops, 1 laptop) all running Win7 and Webroot Internet Security Complete (all software -- system and applications -- is fully up-to-date) through an Apple Airport Express wireless router. My settings are consistent throughout (home network, same workgroup, advanced sharing settings).The two desktops are members of the same Homegroup. The problem is with the laptop. Even though it accesses the web with no problem, it doesn't see the two desktops and can't ping either of them or the router!I have administrative rights on all three PCs while my wife has standard rights on her desktop and the laptop.One strange condition occurs in Windows Explorer where, under the Network heading in the left column, the laptop appears in from both desktop PCs (but won't expand) while neither desktop appears from the laptop.

View 3 Replies View Related

Netbook Not Visible On Home Group?

Feb 24, 2011

Got a netbook that is part of a Home network. It just isn't visible on the home network. It's got the same info as far as group, like HOME. It can see the two other PCs on the network and access their shared files, but it isn't visible by the other two. The only difference is that it is wireless. The netbook runs win 7. One of the PCs runs win 7, the other xp. Everything runs fine between the two PCs. The netbook has the network discovery turned on, has files that are shared.

View 1 Replies View Related

Can't Save Changes To Home-group Settings

May 22, 2011

I can't save changes to home-group settings. When I try to share libraries and printers, printers is already checked, I check other options, like pictures, music, etc. I then click save changes and exit. The problem is when I go back in, it hasn't saved my settings - all the boxes except Printers are unchecked again.

View 3 Replies View Related

Home Group Code 0x80630801?

Oct 13, 2011

I have two computers (towers) in Home Group. One named Silver and one named Black. From the Silver using H/G I can access the Black but from the Black I can't access the Silver computer. Received code 0x80630801 with error 1068. Peer Network Grouping Service not running. At times PNRP service and P2Pimsvc also will not start. I have tried several times in Services to turn them on but they won't start. I ran sfc /scannow, no problem found. Both computers got Tuesdays Windows updates so I don't think that is the problem because it only effects one computer. I removed the latest thing I installed on the Black computer, *LG BlueRay programs. Networking mapping looks as it should. This all was working for about a week or so when I made the Home Group.

View 2 Replies View Related

Cannot Detect Other Computers On Home-group

Jul 15, 2012

My home network has 4 computers(including mine) running windows 7, and all of them are connected to the same router/access point for internet connection. When I created a homegroup, and went to add the other computers, they created another homegroup and the other 3 computers are now in the same homegroup. However on my side, it detects no computers. I clicked "leave homegroup", and it detected no homegroup on the network. The other 3 computers are on the same homegroup and are able to share files and printers. I cannot join the homegroup when i click homegroup in windows explorer it only says there is no homegroup on the network and asks me to create a homegroup.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved