Maintaining User Credentials On A Mapped Drive?
Jul 15, 2011
1. Two Windows 7 computers.
2. Each computer has a user account with the same name, but different passwords.
3. This is necessary because other users can log on remotely to one machine with this user account, but should be locked out of the other.
4. A local user who has access to both accounts tries to access a mapped drive on one machine. The user names are the same, but the passwords are different. Windows gives an error; the local user enters the credentials correctly (same username, but remote machine password) and says "Remember these credentials."
5. Credentials are remembered throughout the duration of the computer session.
6. When the computer is rebooted, the computer forgets the credentials for the mapped drive, and Step 4 starts all over again.
How can the local user save the remote credentials permanently? And is it possible without using Group Policy Preferences, as he is not on a domain?
View 1 Replies
ADVERTISEMENT
Apr 13, 2011
When a user maps a printer on a network they are asked for admin credentials, How do i disable this, I want them to be able to map by themselves.
View 3 Replies
View Related
Aug 5, 2009
I currently am doing file sharing through Samba. My Samba server is running on Fedora Core 8, and I am trying to access the network drive through Windows 7. I can map a network drive to Samba, and I can view and share my files fine.
The problem I am having is that I always ask it to save my login credentials (which are different than my Windows 7 login credentials), and it never does. I have to map the network drive each time I boot up my computer again.
how to permanently keep these settings so I do not have to map this each time I start the computer?
View 7 Replies
View Related
Nov 23, 2009
I've got Visual InterDev 6 installed using Seamless XP Mode.If I open a file on the host disk, which opens interdev I cannot save any changes, and I get this error:"The requested operation cannot be performed on a file with a user-mapped section open" If I save to a new file in the same folder, it saves ok, but any subsequent edits return the same error if I try to save.Is this a permissions problem with windows 7 and XP mode, or a quirk with the old interdev software?
View 1 Replies
View Related
Dec 14, 2011
When I upgraded from XP (a long time ago) I deleted all the thumbs.db files. I can see thumbnails on my local C: drive. If I browse my network drive I can see thumbnails.
But I have also mapped my network drive as Z:. If I browse the mapped drive I can't see thumbnails.
Can anybody confirm that they can/cannot see thumbnails on mapped drives that don't contain thumbs.db.
Folders don't initially incorporate Folder.jpg into their thumbnail. If I browse into the folder I can see the thumbnail for Folder.jpg only. If I then return to the parent folder the folder now incorporates Folder.jpg into it's thumbnail.
View 5 Replies
View Related
Dec 14, 2009
I run a small network in my business. The software I use is perfectly adapted to my use, but it is written in DOS Basic. This limits my access to network devices.
Until now using windows XP, I solved this problem by choosing one hard drive (C) as my server drive and mapping a (Z) virtual drive in every computer to that (C) drive.
I can access and update info in the server (C) drive from any computer, once I have shared and established permission levels. I share the root of the (C) drive, so everything is accessible.
Now I try this with Windows 7 and I cannot access the server (C) drive from the virtual (Z) drive from my programs, although I can see the (C) drive when I open the (Z) drive.
I have tried every possible level of permission settings, and still no luck. My question is this ...am I missing something here, or is it just impossible to do this in Windows 7?
View 0 Replies
View Related
May 19, 2012
I run some CAD and compiler software that (unfortunately!) uses absolute path names in project files, so I need to access all my files with exactly the same path for my PC and my laptop. Enventually I want to put all files on an external NAS drive, but only have the PC at the moment.So my first thought was create a folder on my PC, say C:X_Drive, map it as a network drive, say X:, and share the folder as X: on the laptop. Then I'd always access files through the mapped drive, and all paths would be consistent, and moving to an external drive should be trivial.
This sort of works. I've set up the Security tab to give everyone full access. I can read and write the folder itself, but cannot write to the mapped drive version on the same PC, I'm warned I don't have permission. I'm an administrator and the only user on the system. I've tried UNC addressing and direct fixed IP addressing when mapping, no joy. Subst doesn't work properly either (drive comes up as disconnected in explorer, but I believe that's a known Windows bug).
View 1 Replies
View Related
Oct 28, 2009
I use the subst command to map my d:downloads to A:
In windows XP recycle bin moved any deleted files from A: to the bin, but in windows 7 it doesn't. I can drag the files from the a: to the destop or another drive, then delete them from there to be stored in RB (just in case i need to restore them) but anything deleted from the A: is just deleted.
any ideas how to make the RB recognise a mapped (virtual) drive?
View 4 Replies
View Related
Mar 21, 2011
I'm using XP. I have mapped a network drive to a Windows 7 computer as administrator. I am trying to navigate to Z:UsersMaryPicturesMary's Pictures. But when I navigate to Z:UsersMaryPictures I don't see "Mary's Pictures". I can see "Mary's Pictures" if I'm at her computer.What do I have to do to see all folders and files on Z?
View 6 Replies
View Related
Nov 16, 2009
Still showing up under My Computer. Anyone else have this problem? Suggestions?
View 2 Replies
View Related
Dec 16, 2009
I have a mapped drive that goes to a folder on my internal drive. when my computer starts up the drive will not connect automatically, but connects as soon as I click on it.
I have tried to recreate this drive a few times and always click re-connect on logon but it does not help.
It did work fine for a period so I presume i have done something to stop it working, but can't think what.
I think it may be a setting in my start up configuration (I manage this through CC Cleaner), but can't see what i've switched off.
any ideas?
View 3 Replies
View Related
Dec 31, 2009
On startup, I get the message shown below. If I open Explorer the network drive is shown with a red "X" through it. If I click the network drive, it connects and displays the contents without an issue. If I run any application that needs files on that drive before clicking it in Explorer, it will say the resource is unavailable.
What appears to be happening is Windows tries to reconnect to the drive before the network connection is reestablished. I believe this to be the case because the network icon in the system tray is still showing the animation for establishing the network connection when the message pop's up. There is no issue with authentication or password's, etc., as the drive connects as soon as I click on it.
My question is, does anybody know of a way to set the mapped drive reconnection farther back in the boot sequence or add a longer wait state to it so it doesn't time out before the network connection is reestablished.?
View 4 Replies
View Related
Jan 20, 2012
I mapped a drive from the server to my workstation. Then I created a shortcut to the exe file. When I launch it, it tells me the file cant be located. I have full admin rights.
View 2 Replies
View Related
Jul 12, 2009
Not sure when or why it happens but about 5 shortcuts I have on the desktop to mapped drivesfolders will disappear. Everything else is fine. X64 7264.
Any ideas?
View 9 Replies
View Related
Feb 20, 2011
Ok, here is a problem I have been having lately and it is driving me crazy. I have a network with a server running 2008 Standard R2 and 4 workstations using Windows 7 Professional 64-bit. I also have 1 other station using Windows XP Professional. The software I run off the server is installed as a client install on the workstations and have to use a mapped drive of E: to let the software see the database. Every 6 to 8 hours of non use of the software... when I reopen it I get a not responding and it has to close and reopen. I looked at the mapped drives and the E: drive disconnects but after opening the E: Drive up it connects right away and then the software works fine. I have tried a lot of things people are saying online. I have disabled autodisconnect -1 in the registry and turned off power management on the Ethernet port. I get the following message when I look at the event viewer.
Event 1005, Application Error"Windows cannot access the file for one of the following reasons: there is problem with the network connection, the disk that the file is stored on, or storage drivers on tihs computer may be missing."But here is the kicker... The windows XP Professional works all the time with no problems so it has to be Windows 7. I have the IPs static in the NIC properties and using the DNS of 8.8.8.8 and 8.8.4.4 which is Google. I was using 192.168.0.100 which was the IP of the server but that didn't make a difference.I gave a lot of details to weed out the normal postingAlso I have DHCP and DNS turned on the server if that would be any possible issue that is causing. I don't know beings I put Google as the DNS if routing in the software would be an issue?
View 3 Replies
View Related
May 25, 2011
I have the problem of a long list of redundant mapped network drives without drive letters, for example, documents, documents~1, documents~2, etc. all with same location...right clicking on the mapped does not present any "disconnect" option.Oh, they do not appear as mapped network drives under "My Computer," but under "Network" and the name of the computer (which is on a wireless network with another computer)...I can go to advanced sharing and stop sharing, but then all folders are unshared including the original...I guess this may be the only way of getting this corrected, but it seems like a long way to do something that should be very simple..
View 4 Replies
View Related
Aug 6, 2011
I have a External PVR unit that is connected to our home Theatre system and we watch downloaded movies that are stored on it's hard-drive.. This box is also connected via UPNP and I can see ALL Drives attached to my laptop which is located upstairs in the study...I was able to, from the computer, map this drive (N Drive) and was able to copy the movies files directly to the hard-drive of the PVR.Until recently, I was able to create new folders on the PVR hard-drive and then copy the files, but am no longer able to do so as I keep getting an error msg stating:"Could not create new file N:Moviesxxxxxx. The system cannot find the file specified"I can however copy the movie files or any other files directly to the hard-drive (ANY FOLDER).. Just cannot create any new folders!!!! Which I was able to do previously.?
P.S. I am running Windows 7 Ultimate x32 on a Toshiba Satellite Pro P300
View 5 Replies
View Related
Nov 14, 2012
I have a windows 7 desktop with an SSD and regular mechanical hard drive where I keep my data. I also have a laptop with a small SSD as well. I want to keep the laptop free of non-critical data so I decided to setup a file share between my desktop (Windows 7 home prem) and my laptop (Windows 7 pro). I was able share the files and navigate to my desktop through my laptop. I successfully mapped the folder as a network drive and all was well. Then I rebooted and I was disconnected from it, it remembered that it was there but I needed to manually connect to it and I needed to provide my login credentials. There is no password just a username. Also is there a way to set a timeout because if my desktop is not on and I want to use my laptop, the boot times are much longer compared to when I don't have the mapped network drive on my laptop at all.
View 9 Replies
View Related
Nov 26, 2012
I am working with a Dropbox account on my Domain, and ideally I would like to make my "local Dropbox folder" on a mapped network drive. When I attempt to do so I am met with the following error - [URL]
View 1 Replies
View Related
Oct 12, 2011
I've read that with the mklink command one can create symlinks in windows to mapped network drives. still, whenever I add such a drive as a parameter to the command, I get the error "the file or directory is not a reparse point".What could be the problem? Is there another way to create a symlink on a network destination?
View 3 Replies
View Related
Jan 6, 2013
I'm having a problem maintaining an Internet connection. My Internet co told me they were not seeing my linksys router and advised me to call linksys support for configuration. Linksys would not help me because the router is no longer under warranty. However, it appears to be working fine.All lights are on. When I lose the connection , if I disable and then enable my wireless network connection it immediately reconnects.It may hold for a minute or for several hours but eventually I have to repeat that action. I haven't changed the configuration of the router.
View 9 Replies
View Related
Jul 25, 2012
I have a problem with the speed of my mapped network drive. At first al is wel and file loading is as fast as to be expected. But after some time the transfer speed drops dramaticaly and it becomes very slow. I tested it primaraly with loading of image sequences, but it affects all file loading the same. If I logoff and login to windows again the speed is back to its full potential. And then after some time again it drops. I have seached the internet for similar ploblems, but could not find this kind of problem, only the dropping of the connection entirely, but thats not the case here.
All user PC's that have the network drive mapped are windows7 Pro PC's with gigabit lan. The server PC is also windows7 with quad gigabit lan, teamed to 1 connection. A 4 ssd raid setup via a MSI megaRaid controller provides the drive for mapping. The switch is a HP proCurve 1810G-24. Jumbo frames is disabled on all devices. Because i have no domain, the password protection for file sharing on the server is disabled, so al user PC's can connect to the mapped network drive with their own username.
Is there some sort of idle timer on the mapped network drive that could be responsible or something?
View 1 Replies
View Related
Mar 27, 2012
I am running virtual XP mode in WIn 7. In XP I am able to map a drive G: that is from Win 7 mapped drive (Microsoft Terminal Services). Great, in Explorer you can see the mapped drive.I need to set up an ODBC connection to a database on that drive. No problem I thought.When I need to select a drive in the Select Database window, I cannot see that drive, only A:, C:, D: , the default drives, G: is not shown
View 2 Replies
View Related
Jan 10, 2013
Windows 7 Home Premium - fully updated. I mapped a drive Z: and disconnected it but it still appears. Nothing I have tried works. I have tried net use many times (with everything else closed down) as follows:
net use z: /delete
net use \sharenameUsers
net use z: \sharenameUsers /delete
net use z: \sharenameUsers * /delete ( ie.I passworded the map)
net use z: \sharenameUsers myactualpassword /delete
Yes I rebooted after net use. Yes I used the actual sharename not \sharenameUsers. Is my net use syntax correct for a passworded map?
View 2 Replies
View Related
May 4, 2009
I'm already asking me a while wether it's possible to deactivate the annoying security warning ("Do you want to run this file") when I run exe files on my samba share.
I put various portable apps there and i want to use them as usual files on the local computer. Is that possible? I don't know exactly for what keywords i should search, so i didn't find anything yet. Thanks, best regards, kappen
View 4 Replies
View Related
Oct 12, 2012
I know that opening a folder displays the content in the format of the last window I opened. Most of the time, this is fine. But there are certain windows that I would like to maintain a specific view. For example: Showing List, or displaying all Medium Icons, and set to a specific size.
View 2 Replies
View Related
Dec 13, 2010
We are having ongoing problems with Windows 7 and mapped drive latency on our network. Our environment is as follows:Multiple servers running Windows 2008 & 2008 R2, some VMware servers (including our file server). Windows 7 x64 came preloaded on a brand new Lenovo think-pad, 4gb memory. This occurs on 4 different laptops. This problem ALSO occurs in exactly the same way on an HP Compaq x64 desktop running Windows 7 32. All systems are fully patched & up to date on SP's. Running IP 4 & 6 on all servers & Windows 7 machines Connected to GB Cisco switch.We run login scripts via GPOs that map drives (with net use commands) to 3 shares on our file-server, drives G, H and S.A fourth mapped drive to an IBM I-series does NOT experience these issues.
In Windows Explorer, mapped drives may or may not appear with red X's, but when clicked on they hang with a spinner and the green bar at the top of Explorer begins to run. This occurs randomly, but usually not right after boot up. It can take over a minute to complete. Also, in Word, which has references to these drives in file locations, file opening and saves can be very slow as it attempts to access these shares.This issue has delayed our roll out of Windows 7.Its unacceptably slow and cannot be used in a production environment.We have tried every suggestion we can find on the Internet:Turned off auto-tuning, indexing, thumbnails, set auto-disconnect to the max (both 99999 and ffffffff). Server & clients. No luck. Changed properties on the mapped drives to optimize for documents...no change.Changes setting on the network cards to disable flow control, set static link speed & duplex. Network drivers have been updated. Even tried using our wireless network and disabling wired connection...no change.All bios and hardware updates are completed...no change.Turned on and off network discovery..no change.
Disabled SMB2 on servers & clients...no change.Disabled firewalls, and unloaded antivirus (Trend)...no change.Safe boot with networking & clean boot with no services other than Microsoft...no change.
View 5 Replies
View Related
Dec 21, 2012
I mapped a drive to my laptop from my desktop to copy 1 folder from the mapped drive.When completed I found files missing from the original that i do not see on either laptop or desktop. Where did they go and how can i get them back?
View 4 Replies
View Related
Aug 16, 2012
When I'm away from my home office, I like to use Remote Desktop Connection to log on to 3 of my home computers. I have done this before without problems, but this time I found that I could connect but the remote computer would not accept my login even though I was using a user name and password that I knew worked for logging on locally. I was going to come here for help, but I figured out what the problem was before hand, so I thought I would post what happened just in case someone else runs into this problem.
The problem was that I had gone to the control panel and changed the username from what I had used when the OS was installed. This is a no-no because some aspects of the original user name are permanent. I accidentally discovered this when I went to computer management and clicked on local user and groups and saw two different names. One under column name, and the other under column full name. When I changed the full name back to the same as name, everything then worked fine with RDC.
View 3 Replies
View Related
Jan 19, 2012
On my laptop (running Win 7), I made 2 accounts, Admin and a standard user. When I am logged into the standard user, if i try to do something that needs elevated privileges such as deleting an icon, or installing a .exe file, the UAC will prompt me for Admin credentials which I will type in. However, on my desktop (Windows 7 Ultimate) I am trying to delete icons on the standard user account and it will NOT prompt for credentials. It will give me an error that says I do not have the correct privileges to do this (which I know I don't).
View 9 Replies
View Related
Dec 18, 2009
I have a couple of drives mapped as Network drives to my Windows 7 Pro laptop. One of the network drives is on an XP machine the other is a NAS.Everytime I access the XP drive I am asked for username & password even though everytime I enter it I tick the "Remember my credentials" box.Is there something else I need to do in order for Windows 7 to stop prompting me ?
View 9 Replies
View Related
