Windows 7 Does Not Save Network Drive Credentials
Aug 5, 2009
I currently am doing file sharing through Samba. My Samba server is running on Fedora Core 8, and I am trying to access the network drive through Windows 7. I can map a network drive to Samba, and I can view and share my files fine.
The problem I am having is that I always ask it to save my login credentials (which are different than my Windows 7 login credentials), and it never does. I have to map the network drive each time I boot up my computer again.
how to permanently keep these settings so I do not have to map this each time I start the computer?
View 7 Replies
ADVERTISEMENT
Sep 21, 2009
This problem has been driving me up the wall, so I hope you fine folks can help me out with it .
I have a network storage device with several network folders and each of them are passworded for added security (in case someone manages to connect to my wifi). When I try and access them in any application or Windows Explorer, I am often (but not always) prompted to re-enter the username and password. This happens even though I tick the box to remember these details.
This is on an almost new install and I am completely stuck. Any thoughts?
View 9 Replies
View Related
Nov 17, 2011
My boss has a special network folder mapped only to his PC. He keeps a lot of xls and doc files that are for his eyes only. One of the xls files refuses to save, the error message states that the "file is currently in use". No one else has it open, or even has access to it's saved location.
He can still save a copy with "Save As.." but he can't even manually delete the original file afterwards.
I'm thinking it might be a hung process, but I wanted to see if someone here has a solution/explanation. I'm going over to mess with it now, and will check back later to update.
View 1 Replies
View Related
Dec 18, 2009
I have a couple of drives mapped as Network drives to my Windows 7 Pro laptop. One of the network drives is on an XP machine the other is a NAS.Everytime I access the XP drive I am asked for username & password even though everytime I enter it I tick the "Remember my credentials" box.Is there something else I need to do in order for Windows 7 to stop prompting me ?
View 9 Replies
View Related
Dec 6, 2009
When I try to create a system image on a network location Windows asks for Network credentials for the target location. The credentials I enter are correct but I always get an error message that the location can't be used because the password is not correct (Error code 0x80070056).
Is this a bug in Windows 7? Any way to fix or work around this?
View 3 Replies
View Related
Apr 13, 2011
When a user maps a printer on a network they are asked for admin credentials, How do i disable this, I want them to be able to map by themselves.
View 3 Replies
View Related
Jul 15, 2011
1. Two Windows 7 computers.
2. Each computer has a user account with the same name, but different passwords.
3. This is necessary because other users can log on remotely to one machine with this user account, but should be locked out of the other.
4. A local user who has access to both accounts tries to access a mapped drive on one machine. The user names are the same, but the passwords are different. Windows gives an error; the local user enters the credentials correctly (same username, but remote machine password) and says "Remember these credentials."
5. Credentials are remembered throughout the duration of the computer session.
6. When the computer is rebooted, the computer forgets the credentials for the mapped drive, and Step 4 starts all over again.
How can the local user save the remote credentials permanently? And is it possible without using Group Policy Preferences, as he is not on a domain?
View 1 Replies
View Related
Nov 20, 2011
I've been experiencing a strange (and very frustrating) issue in the last few months in relation to my wireless network profile. At home we recently changed our wireless router. It seems to be working fine on every machine in the house (running everything from XP to OSX to Win 7) except my machine which does the following:On reboot, no matter what, it seem to not want to save the wireless network profile and will continually look for the old wireless network (which I try to delete but seems to re-appear every time) and force me to re-enter the password for the new network. It reverts to the state it was in before the new wireless was picked up, trying to connect to the old network which should be removed.
Today, I tried to run a "clean" start-up. I went into msconfig and under the "services" tab and disabled all services not from Microsoft - This stopped it from reverting and looking for the old network. I got the idea from a thread on the microsoft forums which said to try and locate the service related to the wireless card (I was not able to find mine from the list). As i start to bring the services back in, it puts it back in the state with the old network and does not want to save the new one. One of the services seems to be holding something to stop it from saving in the way it should beIf this helps, this screenshot has all the services (the only one cut off is "Steam Client Service" - Valve corporation which i tested in isolation and did not seem to cause the issue)I've searched this to death and can't find any solution, one of these services seems to be holding it.
View 1 Replies
View Related
Dec 18, 2009
I'm really hoping I find an answer to this question besides the one I've found on the internet a hundred times over (That's not a good idea, you shouldn't do it).
My question is: Is there a way to allow a user to create/edit files in the C drive (system drive), and in the Program Files contained there? Let's assume that this user is not only a local admin, but a domain admin as well.
The reason for this is I work for a company that does a lot of editing within these areas of Windows. We need to be able to create and edit files where they are stored. I know one way around we've found is to copy the item out of the folder, edit it, and put it back, but this is a pain in the butt.
I also know that most program need to "run as admin", so that's not the problem either. I've given this user every right and permission in the Security tab of the C drive, and had it propagate down through all files, folders, and sub-folders, and still I'm hit with an error that says "Access is Denied" or another one saying that I don't have the right privileges.
Please, if anyone knows how to change this in 7 it would be much appreciated. I know that this worked in XP, and I'm not looking for someone to tell me "this is a bad idea so don't do it", or "maybe it didn't work right in XP". I have seen enough of these.
UPDATE: I have been playing around with saving office and wordpad documents into the C drive, and into the Program files. It seems that I'm able to do both now (for some odd reason), but I still receive intermittent errors when trying to edit or copy/paste or cut/paste from one location to another.
View 5 Replies
View Related
Feb 19, 2012
Why do files moved to an external drive not behave the same as those same files in an internal drive? I noticed that if I do anything to a file that is in an external drive, that file can not be saved under the same name (read only). In order to do so one must save it internally and then copy or move it to the external drive.So I did just that--I copied a file from taken from an external drive, saved it in the internal one and then copied it back to the external one. Now if I r-click the propeerties of these 2 same files and then go to the 'Security' tab a difference is immediately apparent: The internal one has -1- System & -2 My-computername (user-PCuser and -3- Administrators (user-PCAdministrators) with all 3 accounts allowing all (full control, read, write, etc..). While the external drive has in Properties; -1- System -2- Administrators (user-PCAdministrators) and -3- Users (user-PCUserrs) with this final 3d one (and different one) with no Allow for "full control, or modify or write. So how does one have all its files in this external drive behave and be equal to all the same files in the internal drive?Since -3- Users (user-PCUserrs) in the external drive is that which is differnt from the internal drive I was wondering if it is OK to delete this Permission or 'attribute' or whatever it is called and create instead one equal to the one in the internal drive -3- Administrators (user-PCAdministrators)? ANd of course doing so in one go and not file after file after file individually?
View 6 Replies
View Related
Feb 19, 2012
Why do files moved to an external drive not behave the same as those same files in an internal drive? I noticed that if I do anything to a file that is in an external drive, that file can not be saved under the same name (read only). In order to do so one must save it internally and then copy or move it to the external drive. So I did just that--I copied a file from taken from an external drive, saved it in the internal one and then copied it back to the external one. Now if I r-click the propeerties of these 2 same files and then go to the 'Security' tab a difference is immediately apparent: The internal one has -1- System & -2 My-computername (user-PCuser and -3- Administrators (user-PCAdministrators) with all 3 accounts allowing all (full control, read, write, etc..). While the external drive has in Properties; -1- System -2- Administrators (user-PCAdministrators) and -3- Users (user-PCUserrs) with this final 3d one (and different one) with no Allow for "full control, or modify or write. So how does one have all its files in this external drive behave and be equal to all the same files in the internal drive? Since -3- Users (user-PCUserrs) in the external drive is that which is differnt from the internal drive I was wondering if it is OK to delete this Permission or 'attribute' or whatever it is called and create instead one equal to the one in the internal drive -3- Administrators (user-PCAdministrators)? ANd of course doing so in one go and not file after file after file, individually, would be ideal.
View 3 Replies
View Related
Jan 20, 2009
on xp i used to be able to connect to my school web folder and it used to look like any other folder (i could save directly to it etc). now when i connect to it by the same means it comes up with a text with of my documents with blue links next to them. i can open them up but i cant save directly on to the server.
View 9 Replies
View Related
Jan 19, 2012
On my laptop (running Win 7), I made 2 accounts, Admin and a standard user. When I am logged into the standard user, if i try to do something that needs elevated privileges such as deleting an icon, or installing a .exe file, the UAC will prompt me for Admin credentials which I will type in. However, on my desktop (Windows 7 Ultimate) I am trying to delete icons on the standard user account and it will NOT prompt for credentials. It will give me an error that says I do not have the correct privileges to do this (which I know I don't).
View 9 Replies
View Related
May 21, 2011
I have two computers currently running Windows 7.
-On both computers, I use an account with administrator privileges
-On both computers UAC is set at the default level.
For some reason, on one computer I am capable of saving files on the C drive without having to run a program with UAC, but on the other computer this does not work. Similarly, if I right click on a program in my C drive and click "Create Shortcut" I receive the message "Windows can't create a shortcut here. Do you want the shortcut to be placed on the desktop instead?" What I'm trying to convey by point this out is this is not a problem that I have with a particular program, but an issue I'm experiencing with the operating system in general.
View 4 Replies
View Related
Oct 21, 2011
I have an iPhone 4 which has internet tethering. I can either connect this via the USB cable or wirelessly via my intel 6300N wifi card.
When I connect to my laptop via USB cable, the 'Set Network Location' box comes up, which I select Home Network. It is simply named 'Network', but I then go in and change 'Network' to 'iPhone'. This then shows up in the Network and Sharing Centre as iPhone on a Home Network. This works perfectly, is super fast and when I'm finished, I disconnect the USB and shut down.
When I next turn on my laptop and connect my iPhone internet tether via USB cable, I am once again asked to ''Select a location for the 'Network' network''. Windows 7 netwkr and Sharing centre isn't recognising the same iPhone is connected and asks me to set up a home network again.
I've gone into 'Merge or delete network locations' and the original 'iPhone home network' is set up (not in use) as well as the new 'Network' location that it's asking me to set up. If I merge the second 'Network' and original 'iPhone network', this removes the second network and I'm left with the 'iPhone Home network (in use).
If I disconnect the iPhone and reconnect, it asks me each time to select a network location for the 'network' network. If I don't merge them, I end up with Network 2, Network 3, Network 4 etc all the while still having the original iPhone network not in use as well as any other not merged or deleted.
Why won't it recognise the same iPhone as being connected and selecting the iphone home network that I set up and why does it keep asking me to create a new one whenever I connect?
This never happened before, with my laptop previously recognising the iPhone home network I originally created ages ago. There has been no significant updates or changes that I'm aware of, except that I updated my iPhone software, bt this has been done in the past numerous times with previous iPhone updates and hasn't happened before.
I have a Virgin wireless broadband usb modem, which the system recognises each time I connect it. It's only the iPhone connection that's not saving. The iPhone network is 'unmanaged' but so is the Virgin Broadband USB.
I have a Pioneer Dreambook P170HMx running Windows 7pro x64. If there's any other details you need, I'm happy to supply them. All I want is my system to save the network configuration and recognise when I connect the iPhone tethering that it's an already created iPhone Home Network.
View 9 Replies
View Related
Oct 25, 2011
I want to save the Default Gateways in Advance TCP/IP Settings for my network adapter. I used the following sequence to set the values:
1. Open Adapter Settings (LAN Properties).
2. Select IPv4 and click on Properties.
3. Click Advance.
4. In the Popup select to add Default Gateways for both my Wired and Wireless network.
5. Click OK to close all open windows.
When I again open the settings, the changes in Default Gateways are all gone. The default gateway for both my wired and wireless network are same and both are connected to internet. I want to prefer wired over wireless whenever it is connected. I already tried changing Interface Metrics with no use at all. I searched the internet and got the information to select the default gateways with proper metrics.
View 3 Replies
View Related
Nov 23, 2009
My wife and I have Windows 7 on each of our computers. I thought I installed networking between the two computers. I am able to look at files from each of our computers. However, we I open a file in one of the computers it will not let me save the updated file. The error message says the file is read only. Any ideas?
View 1 Replies
View Related
Feb 2, 2012
The situation: Using windows explorer to access a shared network resource, for example, \blahfolderfolder2 - the first time I try this on a new installation, it requires authentication (user/pass) which I provide (this is on a workgroup, not a domain).That's fine. The goal: I want a way to force Windows 7 Pro to forget the authentication and ask for a new authentication next time an access is attempted for that share. Here's what I have tried, and what has not worked: Windows Explorer -> Tools -> Disconnect Network Drive (it doesn't work because there is no mapped network drive to disconnect; next connection attempt does not ask for authentication) From command prompt (run As administrator): rundll32.exe keymgr.dll, KRShowKeyMgr -- Then select any network share to clear credentials for, then click delete button. (no network shares listed; next connection attempt does not ask for authentication)
From command prompt (run As administrator): net use * /delete /yes
(
nothing happens; next connection attempt does not ask for authentication) From command prompt (run As administrator): control userpasswords2
Go to advanced tab, click on manage passwords. This brings up the credential manager (can also get to credential manager directly from control panel). Find credentials to delete (windows, certificate-based, or generic) - there are currently none listed, though there had been earlier, and all were deleted. No change; next connection attempt does not ask for authentication. From command prompt (run As administrator): secpol.msc
Go to security settings -> local policies -> security options -> Network access: Do not allow storage of passwords and credentials for network authentication.
Enable it. Exit and reboot. No change; next connection attempt does not ask for authentication. I have tried all of these with or without rebooting immediately after.
View 1 Replies
View Related
Feb 11, 2012
Ok so i have 3 partitions C,D,J and for some reason when i tried to save to J it tells me tha i dont have permision to save there and to contact the administrator but i am the administratorand it tells me the same thing when i tried to save on the root of C drive too.But the funny thing is tha i can copy and paste to both J drive and C drive i just can't save there.
View 8 Replies
View Related
Mar 3, 2012
I have two drives on this laptop, which came with it when I bought it. It's a C: and D: drive. My D: drive is much larger than my C: - I have 350 GB on my D: drive, but whenever I download or save something - and many times it's done automatically - it wants to save to my C: drive, which is almost out of space. I wind up having to manually move over files from C to D before I can even save something in order to free up space. I'd like to change settings somehow to where whenever I save something, it's saved to my larger D: drive.
View 2 Replies
View Related
Sep 14, 2010
I installed Windows 7 to test it on my PC (I still use XP for most purposes). Now I want to reinstall it because I want to try a different version. Unfortunately, I would have to re-assign all drives again and I have a lot of them. Is there any way to save the current assignment and restore it when I have reinstalled Windows?
View 5 Replies
View Related
Apr 13, 2012
I have installed a new, larger hard drive in my Windows 7 computer. I used Easy Transfer to save my pictures from the old hard drive. I used an external hard drive,After doing the transfer, I get a message saying completed. I can't find where they are saved to
View 2 Replies
View Related
Aug 16, 2012
When I'm away from my home office, I like to use Remote Desktop Connection to log on to 3 of my home computers. I have done this before without problems, but this time I found that I could connect but the remote computer would not accept my login even though I was using a user name and password that I knew worked for logging on locally. I was going to come here for help, but I figured out what the problem was before hand, so I thought I would post what happened just in case someone else runs into this problem.
The problem was that I had gone to the control panel and changed the username from what I had used when the OS was installed. This is a no-no because some aspects of the original user name are permanent. I accidentally discovered this when I went to computer management and clicked on local user and groups and saw two different names. One under column name, and the other under column full name. When I changed the full name back to the same as name, everything then worked fine with RDC.
View 3 Replies
View Related
Oct 20, 2009
I tried running a program or bot on my Windows 7 Installation a few days ago. I assumed that the program would actually own the credentials of me since I was running it, but sadly that was not right as the program proceeded to tell me that it couldn't write to files. Which I found odd as I myself could both open then, read, add and then save with the changes remaining.
I had to actually add myself to the folder with "Full Control" before the program could run without any error. Now is it I ask, Why is that even required?. I thought it was implied that if I can access the folder, read and write to and from it, that any programs I run can do the same.
At least thats how it worked under XP, but yes I am aware that security has been tightened in both Vista and Windows 7. But seems rather useless having to assign myself to a folder I got access to already, before a program I run can access it.
View 2 Replies
View Related
Mar 30, 2012
I just put in a new hard drive and installed my Windows 7. Under properties / General there is an option to "Compress this drive to save space." By checking this does it compromise performance at all?
View 2 Replies
View Related
Aug 24, 2010
I cant seem to save any file every time I download a program from the internet to my c drive (specifically under program file folder)- keep on prompting need permission from the administrator. I tried the cmd command still not working.
View 4 Replies
View Related
Sep 15, 2011
I screwed up today. While meaning to delete files from AppDataLocalTemp, I accidentally deleted (many) from AppData. [Sidebar: Is there any way to configure the file explorer such that deleting from the folder view is disabled?] After a brief panic, I downloaded (from another machine) the utility Recuva64 and restored the missing files to a separate drive, after which I copied them back to where they belong.
But, there was a problem - I could not copy files from the recovered folder Credentials to LocalAppDataCredentials. Even stranger, I did not have permission to view the security credentials of LocalAppDataCredentials. I tried booting to safe mode to fix this, but both folders were gone - the recovered one as well as LocalAppDataCredentials.
So, my system is up and running, but the folder LocalAppDataCredentials is missing. I tried using Recuva64 again, but it did not find the folder. I also looked in an older backup of my profile, but again, I did not see the folder. The folder does, whoever, exist on my notebook (but whose to say if the information is consistent).
View 1 Replies
View Related
Mar 27, 2012
how much hard drive space will it save? i have windows 7 64-bit pro. and does the change keep until i change it back?
View 3 Replies
View Related
Nov 17, 2009
How to make Media Center to save recorded programs to a folder and device
of my choosing. In my case, a external USB drive.
I'm at a total loss on how to get this damn annoying application to save
programs (live TV) to a folder and drive of my choosing.
I look in setup and see no settings for such.
Frankly, I find the Media Center horrible implementation for what I want to do.
Edit. Doh. I managed to stumble around in the settings menu morass and
found the section I needed for changing to another drive.
I still hate MCE. I want my Beyond TV back.
Now to record Red Eye so I wont have to stay up till 3am.
View 3 Replies
View Related
Sep 16, 2011
I need help getting my Remote Desktop Connection to work. I have followed every tutorial on this site to no avail. My pc is WORKGROUP, there is no domain. I feel like I have tried everything and still it says my credentials did not work.I am trying to set this pc up for WOL. I have activated Remote Device Access through the Control Panel and in the BIOS. I have followed through with everything to achieve waking my pc through WOL Magic Packet sending. I just can't get the Remote Desktop Connection to work to see if I can actually access the pc and get into my files.I am setting it up to be an offsite storage unit for my place of business.
View 1 Replies
View Related
Oct 15, 2012
how do i modify sidebar word 2010 save as save in ? i am running window 7
View 2 Replies
View Related
