Unable To Save Default Gateways In Network Settings
Oct 25, 2011
I want to save the Default Gateways in Advance TCP/IP Settings for my network adapter. I used the following sequence to set the values:
1. Open Adapter Settings (LAN Properties).
2. Select IPv4 and click on Properties.
3. Click Advance.
4. In the Popup select to add Default Gateways for both my Wired and Wireless network.
5. Click OK to close all open windows.
When I again open the settings, the changes in Default Gateways are all gone. The default gateway for both my wired and wireless network are same and both are connected to internet. I want to prefer wired over wireless whenever it is connected. I already tried changing Interface Metrics with no use at all. I searched the internet and got the information to select the default gateways with proper metrics.
Today I bought an HDMI cable in order to have a dual monitor with my lg 42 inch tv. I updated my drivers and tried unplugging, restarting, etc. Under my control panel when I tell it to extend it will say unable to save display settings. I run a radeon 6950?
I'm desperately trying to change the sidebar gadget to open websites by default with Mozilla Firefox (in particular, the "Ask LEO" gadget).
Firefox is my default browser. If I double-click on a .url file saved on my system, it correctly opens Firefox, and so does clicking a link in MS Outlook. Again, Firefox is default, but that's not my problem.
Somewhere I found the advice to change the "Set program access and computer defaults" settings. So I tried, but every time I change something there, it doesn't keep the setting. I click on Custom => Default Web Browser => Mozilla Firefox, click OK, get some flashing on desktop, but next time I get there it's set back to "Use current browser" again.
Anyone got the same problem? I'm using the 7100 (x86) build, but a friend of mine tried the same on the final build (x64) and he got the same problem. It's reverting all the time. Re-installed Firefox, restarted, changed/tried/reset everything I can imagine.
Edit: It seems the problem is a Javascript-call "window.open" in the "Ask LEO" gadget. Someone knows why this call opens IE and every other call doesn't? And is there a workaround?
Edit2: With a dirty hack I solved the problem. Edited the gadget and replaced "window.open" by "System.Shell.execute". Still - I'd like to know why a) I can't change the default programs setting and b) why window.open ignores my default browser configuration.
I am unable to keep my default settings with Word 2003 and 2007 (font settings, AutoText etc). If I close out of word and reopen it, all my settings disappear.
Is there any way to set the default save location folder for downloads in IE8 to the last folder that the same file type was saved in? It makes no sense to default to a single folder and have to browse through to the desired folder for every single download, so I assume there has to be an option somewhere.
Now, just 3 days ago It started the BSOD issue.I realize that my GPU was the cause of this issue. When playing games or open 3d applications the temp goes 30C to 72C (In 15 seconds) then 82C - 85C constant (in about 30 seconds).Now I've been using MSI afterburner to check my temps and at fulload my GPU will be at 62-72C max temperature but now it's 10C even higher then before. No, I haven't fiddled with the voltage I set the GPU voltage to 1.037v which is the safest (been running this almost 8 months!). The GPU is the GTX 560ti.Is there a way to set the GPU on default settings or reset GPU settings in cmd or other professional way. I have uninstalled the drivers, uninstalling GPU, disabled GPU, disabled PCI-E slot and so on by using device manager and the issue still persist. Yes, I also have clean the GPU perfectly and still the temperature goes up to 82 seconds at 30seconds-45seconds. Yes, I have checked everything is set correctly and so on, I am a PC Tech.
Is the GPU damaged? Yes I have looked at this thread: Stop 0x124 - what it means and what to try Mainly, I know its the GPU straight away, I tried checking old drivers, new drivers, another GPU overclocked software such as GPU tweak and EVGA Precision. I am thinking it's the GPU is damaged or the PCI-E is damaged (I have another PCI-E slot on my system and the issue still there). It might be the PCI-E frequency? but it's set to 100 which it meant to be, I just hope is software related because I don't have the money to buy a new card. Did the dump files help?
Two build 7000 machines in my homegroup... One works fine and I can check/uncheck media to share in the homegroup. The laptop, however, is a different story. When I check a library to share in a home group (pictures, videos, music, etc) then click "save changes" nothing changes. When I can back into my homegroup settings, there are no check marks.
I am trying to set my default file save location to my Desktop. I searched the web and found solutions but I must be doing something wrong.For instance, I recently saved a Notepad file to My Documents / example_folder. Then I thought I had set the default to Desktop by the following:Start > [my_username] > Documents > Properties, highlighting Desktop, clicking "Set save location" so that the checkmark is at Desktop, clicking Apply, clicking OK.So the next time I save a Notepad file, it defaults to the last folder I saved in ( example_folder ), not Desktop.How do I get the default Save File to be Desktop?
How can i change where WMC saves recorded TV?I do know that i can change to another Hdd (at the current momoment i dont have a second Hdd)I want to change to a diffrent folder on my C: Drive (same drive as the OS)The default folder it saves to is C:UsersPublicRecorded TVI want to change it to C:UsersDerek and TienaMy Recorded TVI cannot figure out how (if at all) how to change it.
After changing my mouse pointer settings and turning off my laptop, they reset. I have Windows 7 Home Premium. I have tried multiple solutions to this, but nothing has worked.
Ive been having a problem with my services program. My laptop (vaio) has been having problems with the hot-keys and I found out the problem was that the Vaio Event Service doesnt start when I turn it on so i turn the service on and set the service to start automatically at start-up.
My computer blue screened with an IRQL Driver not less or equal error, it's the second time its happened over a few weeks. Upon rebooting, my computer went into "preparing your desktop" and failed, and made a temporary profile. I system restored to get backto my original settings.Now, my taskbar is empty for quick launch, and changing settings in the file explorer does not save anything.Additionally, all my system fonts seem to be different, they don't look smooth any more. No setting changes I attempt in explorer save at all.I found a guide about changing some settings underKEY_CURRENT_USER/Software/Microsoft/Windows/CurrentVersion/Explorer/ (some folder) but the only folder that exists there is SessionInfo.
I have an HP pavilion DV8 laptop, and a logitech wireless USB mouse, as well as the standard laptop touch pad.
So, I can change my mouse settings in the control panel, as well as my logitech app, and as it stands they intermix slightly (The control panel effects the logitech app's sensitivity). Basically I turn my control panel speed settings up (all the way, I shouldn't have to touch the touchpad 5 times to navigate across the screen), and on the logitech app I turn the sensitivity down most of the way (any faster and its a bit squirrely to use).
The problem is, whenever I restart my computer the control panel mouse settings revert back to being REALLY slow, and it is getting a bit annoying to have to go into the control panel every time I start up.
I can't save changes to home-group settings. When I try to share libraries and printers, printers is already checked, I check other options, like pictures, music, etc. I then click save changes and exit. The problem is when I go back in, it hasn't saved my settings - all the boxes except Printers are unchecked again.
I had bought my Acer notebook a while back, which had 3Gb, but seemed insufficient for my work. Hence, I upgraded it with two new RAM Modules of Transcend make (2 X 4Gb) recently. However, I haven't found any noticeable performance improvement post this huge upgrade. Also, when I check the Virtual Memory settings, it shows that "Currently Allocated - 8054 Mb" and "Recommended - 12081 Mb". The check box on "Automatically allow windows to manage paging file size" is checked by default. Every time I go to this screen, and even though I don't change anything, it prompts me to save the setting and restart windows.
I have an Acer Aspire One D255 (windows 7 ultimate) I have a problem. Why is it that whenever I change my desktop backgound and after shutting it down, the background was not what I chose? And i downloaded files (for example AIMP3 and some music files) and ALSO after shutting it down, all downloaded files and copied files were missing?
I have two drives on this laptop, which came with it when I bought it. It's a C: and D: drive. My D: drive is much larger than my C: - I have 350 GB on my D: drive, but whenever I download or save something - and many times it's done automatically - it wants to save to my C: drive, which is almost out of space. I wind up having to manually move over files from C to D before I can even save something in order to free up space. I'd like to change settings somehow to where whenever I save something, it's saved to my larger D: drive.
How to I change the default save location of any saved file from C drive to D drive?How to delete current user and program folders on my C drive? Info:I am trying to tidy up my computer and need some assistance with default save locations.I have 2 drives, A 60gb SSD (c:drive) and 1TB standard HDD (d drive). I have my OS on the C drive. I currently have 12gigs of information between two default folders named programs and user. Also when I download, files automatically go to c drive/users/andrew, I get no say in the choice, I want all files going to D drive.All I want to do is remove them from my C drive and have the default locations for any file saved to be to the D drive. This is because I only want select programs, i.e the ones I use regularly to be be on the much faster SSD c drive.[CODE]
Previous versions of Windows had a "sticky" default file "save as" subdirectory. e.g. when saving a group of photos from an email to a particular subdirectory you only had to point to that subdir in the first save. subsequent saves would by default go to that same subdir. In Win 7, everytime I do a "save as" for a picture (jpg, bmp, etc.) the default subdir is the PICTURE LIBRARY subdir. Is there a way to make Win7 remember the last subdir saved to so that you don't have to drill down through multiple subdir to get to the last subdir you accessed?
In windows XP perfmon asked every time I wanted to close it if it should save the settings / session. In Windows 7 it says nothing and I see no way to save all the counters I've set up. There is an option to Save Settings but I see no option to load them back. Basically I want Performance Monitor to startup as I left him the last time. Any hints?
I have been through these two links below MS Office Word : Set Default Save Location Library - Set Save Folder If I want to change a default saved location folder for any of those file's types : Excel, adobe , jpg, access, email attachment , ,,,,,etc Do I need to repeat the procedure explained in the above two links for each individual file type?
How can i make IE9 save web pages in a default format So, anyways, is there a registry hack anyone has made for IE 9 that can force IE 9 to stop choosing mht as the default format? I am sick, have been for years, of switching it to htm. It's also noteable that more webpages on IE are able to saved in mht form, rather than htm (and firefox can save any ANY page in either format). It's as if Bill Gates had a mht fetish and decided we should all go by his ways.I'm using 64 bit windows.
Testing a windows 7 setup and have problems with the default save as/ open location not defaulting to the users home area. It goes to the desktop insteadI have done thefollowinn group policy go to User Configuration AdministrativeTemplatesWindowsComponentsWindows ExplorerCommon Open File DialogClck ontems displayed in Places Bardd your Save Location. for example \myserverusers est\%USERNAME%i have put the setting in number 1 and i does not work, i have put it in all 5 and still does not work, i have tried just
I have two different Internet Service Provider (ISP). The first ISP router is 192.168.0.1 The second ISP router is 192.168.0.2 I want to know if I set 192.168.0.2 as a secondary default gateway in windows 7 pro. with metric 10. ( Tcp IP properties / advance TAB / bottom add another default gateway) will windows 7 pro, be able to tell if Router1 - 192.168.0.1 internet is down and it should start routing the traffic VIA Router-2 192.168.0.2. I had bad experience with routers that have multiple WAN port they never did the Job well. I want to know if I can use windows to solve the problem. also if Router1 is back online will it go back to it or stick to Router2 until it restarts? what exactly is Windows 7 Routing rules for multiple gateways if internet is down in one of them? If this is not the way to do it, what would be my 2nd option, and what type of router I should use.
*note if router1 internet is down, the router is still up and responding. just no internet connection
I am trying to create a template with specific styling to be used by our group. Any document created with this template should be saved to a shared network folder. I'd like to know if this is possible...When I right click on my template and choose NEW, the resulting document should use...- the default text font face, size and colour that I specified.- the default paragraph spacing and indentation rules that I specified.
"windows photo viewer can't open this picture because either photo viewer doesn't support this file format or you don't have the latest updates to photo viewer".im trying to save pics in jpg format from a site that i have saved pics from many times before without any issues but when i click on the saved pic i get that message. actually even the thumbnail looks different. it looks like some default blue & green image on the thumbnail.
I have a new Windows 7 laptop from my work. I can open files (Word, Excel, Adobe and so on) on the server but when I try to save them it seems to be hit and miss. Most of the time I get a flag that says the file can't be saved because it is in use already. I can usually save it to my HD by renaming it but this is inconvenient
[code] i was reading something online that everything under services should be normal because of the default settings and wasnt supposed to be ignored. I wanted to find out how they were put on ignore and if you could give me instructions on how to get the default settings on those services again. I already tried sc.exe and run it on administrator but everytime i type something on cmd prompt it closes.
I run Windows 7 as an administrator but recently I have lost the ability to save files on my desktop or other library locations. I receive the following message:"You do not have permission to save in this location Contact the Administrator to obtain permission Would you like to save in the My Documents folder instead?"
