"Hide Empty Drives" In Windows Explorer?

Feb 3, 2011

I enabled in WinExplorer menu Tools->Folder options->View->Hide empty drives in the computer folder.However (even after restart) empty dirves (like my DVD drive (=no media inside)) are shown in WinExplorer as drives.How can I disable otherwise empty drives in WinExplorer?

View 7 Replies


ADVERTISEMENT

Unable To See Empty Drives In Explorer?

Nov 18, 2011

I have tried every conceivable way to get Explorer to let me view my empty drives under Computer. They show when there's a disk in them. They show in the reading pane, they just won't show up as empty drives in the Nav pane. I have tried deleting the upper and lower filters in the registry. Un checking the "Hide empty drives" in Folder options, adding a (1) to the registry settting "Hide drives with no Media". That setting seems to change itself back to (0) all the time. I am totally at a loss getting the empty drives to show themselves in the Nav pane.

View 6 Replies View Related

How To Hide Empty Recycle Bin In Windows 7

Aug 25, 2012

I would like to disable deleting remove recycle bin.

View 1 Replies View Related

Hide Specific Drives/partitions In Windows 7?

May 30, 2009

I have a PC which shows not only my C: drive for Windows 7 but also various Vista drives & partitions - when I boot into Windows 7.So, how do I hide my D:, E:, F:, etc. drives which are for Vista? I don't want to see them when I'm in Windows 7.

View 5 Replies View Related

Internal Flash Reader - No Drive Letters (not A Hide Empty Drive)

Oct 8, 2012

Before I even go further: yes, the "hide empty drives" has been unchecked)I had to reinstall my machine and I was able to to see the drive letters for the internal flash card reader. However I think something might have gone wrong when I give my external HDD a drive letter that was held by one of the flash card reader).I wrote "I think" because I am not really sure since I never wanted to use the internal card reader till today so I never noticed there was an issue. Anyway, the internal card reader does not show up even when I insert a card in the reader. Basically nothing happens. I have uninstalled the "USB Mass storage device" and it gets installed without any issue but the problem is still there: I can't see the reader. the INTERNAL flash card reader has a USB slot and when I insert a EXTERNAL flash drive, the EXTERNAL flash drive shows up.

View 4 Replies View Related

How To Hide Type Of File In Windows Explorer

Jan 1, 2013

I am not looking to select a file here or there and hide them myself. The byproduct of editing certain files in video editing software is they create extra files to the files already. Is there a way I can tell windows 7, "Can you hide any files with the.sfk extension from here on out?

View 2 Replies View Related

Hide System Reserved In Listing Of Drives?

Jul 7, 2010

I just reformatted my HD and installed Windows 7-64 Ultimate again. Since I have been using Windows 7, I know most of the tweaks, but don�t recall how I fixed this one. When in Windows Explorer, under Computer, I see all of my hard drives, but also see a drive for System Reserved. What tweak do I need so that I don�t see the system reserved?

View 7 Replies View Related

Windows Explorer Collapses If DVD Ejected - Drive Empty?

Sep 19, 2010

Assume I open WinExplorer and click on the CD-ROM/DVD drive letter E: The whole DVD content is shown. Fine. Now I eject the DVD by opening the tray. As a result the whole WinExplorer collapses and auto-closes itself. UI guess because drive is automatically removed then a drive is empty. How can I prevent this auto-closing resp. show the drive letter even if the drive is empty?

View 1 Replies View Related

External Hard Drives Wake Up When Empty Recycle Bin

Feb 19, 2012

I currently have 4 external hard drives connected to my computer. I have each of them set to sleep after an hour of inactivity. However, if I am using the computer, they stay asleep, until I delete something; anything. Any time I send something to the recycle bin, all four of my external hard drives wake up.

I would like for this not to happen. I already went to the Recycle Bin Properties and set each external hard drive to "Don't move files to the recycle bin. Remove files immediately when deleted" thinking that it would quit checking them for deleted files.

how to prevent these external hard drives from turning on when I delete files off of my computer. And just to be clear, I am NOT deleting files that are on the externals, they are files that are on the Computer.

View 2 Replies View Related

Remove/hide The Lower Bar In Windows-explorer (not Status Bar) ?

Mar 8, 2011

Currently I am sitting in front of a Windows 7 (Home) where the WinExplorer shows at the bottom an additional bar for each fodler/file.Its NOt the status bar but a second one.How do I disable/hide it permanently ?

View 1 Replies View Related

Memory Stick Showing Folder Empty In Windows 7 Explorer?

Nov 11, 2011

We have just bought new PC with Windows 7 after old PC died. Have tried to transfer files from a memory stick (mainly word / excel) onto new pc but Windows exploer says memory stick folder is empty. When put stick into laptop (running I think on XP) it clearly shows files are present. Have tried copying files onto different stick but get the same problem.

New PC has Kapersky and it scanned the stick when 1st put it in and found no problems with it.

View 2 Replies View Related

ESATA Drive Shows Up Empty And As Four Removable Disk Drives

Jan 31, 2012

I have an eSATA drive that has stopped functioning properly. I was trying unsuccessfully to install some completely unrelated software when I noticed that my eSATA drive was presenting differently. Under My Computer it now said that the drive was empty and there were four drives that appeared that said "Removable Disk (G)", "Removable Disk (H)", "Removable Disk (I)", and "Removable Disk (J)". When I select my eSATA drive, it says 'folder empty'. When I select one of the removable disk drives it says "Please insert a disk into removable disk (?). Whenever I reboot the computer with the eSATA drive disconnected, all five disk drives go away. I don't remember changing any settings or anything like that. One thing is odd that in device manager, the eSATA drive comes up as a SCSI drive. The device manager shows it as "WDC WD10EADS-65M2B1 SCSI Disk Device", but it is actually a "WDC WD500F032".

[System Summary]
Item Value
OS Name Microsoft Windows 7 Home Premium
Version 6.1.7601 Service Pack 1 Build 7601
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name HOME

[code]...

View 8 Replies View Related

Hide A Specific Filetype From Being Displayed In Explorer?

Oct 8, 2010

Can I hide a specific filetype from being displayed in Explorer?For instance, I have an application that makes many .ecx files. I need the files, or more specifically the program needs the files, but I don't need to see them.

View 3 Replies View Related

Older DVD-RAM Archive Discs Showing Empty In Explorer

Sep 17, 2011

I have been using DVD-RAM discs for many years to store/archive pictures and other data and have never encountered any problems with them. Recommendations I have seen on the web state that this format is the most robust and reliable DVD format for data storage and that DVD-RAM discs should have a lifetime of 30 years if stored in the right conditions. I recently purchased a new Sony Vaio 'all-in-one' PC with Windows 7 64 Bit OS and I have been very pleased with it.

One of the reasons that I chose this PC was because the optical drive spec included read/write for DVD-RAM discs. I tested this facility straight away and it appeared to work perfectly with new DVD-RAM discs BUT when I put in some of my older DVD-RAM archive discs, Windows Explorer shows them to be empty, although a few of the discs it was able to read OK. I have a lot of DVD-RAM archives but fortunately, I still have an old XP (SP3) laptop which can read the discs.

So, I am in the process of copying all the archived data onto a 1TB Toshiba USB drive from where the new Sony Vaio can access the 'missing' files. The question in my mind is whether there is a fundamental incompatibility between older DVD-RAM discs and Windows 7 64 bit or whether the problem lies with outdated drivers, different formatting of older DVD-RAM discs or some other reasons. I also need to decide whether to continue archiving onto DVD-RAM discs.

View 2 Replies View Related

Keyboard Shortcut To Hide/unhide Navigation Pane In Explorer?

Jul 9, 2011

Anybody know a native keyboard shortcut that will hide/unhide the Navigation Pane in Explorer? Something like how Alt + P works to hide/unhide the Preview Pane?I have a netbook and sometimes I need more horizontal space so its nice to hide the navigation pane temporarily.

View 5 Replies View Related

Using Media Drives With Windows 7 Explorer 64-bit?

Sep 12, 2012

RECENT PROBLEMS REQUIRING A FIX1. Although the Autoplay is selected as default, neither my DVD/CD Drive NOR MY Blue Ray drive will autoplay. They require to be opened manually.2. I am unable to use Drag-and-Drop in Windows Explorer to copy files to a removable disc OF ANY TYPE/BRAND, yet both drives will successfully PLAY from any media source.3. The Right-hand mouse click no longer shows the normal options. This situation applies irrespective of which mouse I use. For example, when I load OR try to copy files to a new disc, I get a message panel telling me the disc is not recognised and asking for it to be formatted.

View 1 Replies View Related

CD Drives Missing From Windows 7 Explorer?

Oct 26, 2010

I have upgraded to Windows 7 Ultimate, since then I have not had the CD drives showing in windows explorer in the drop down section on the left. If I put a disc in it then shows up. I am used to XP and all my drives showing.I looked at the properties for the drives and there is the message showing, Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19) instead of "this device is working properly".

View 4 Replies View Related

Inserting Or Removing Drives From USB Causes Windows Explorer To Restart?

Jun 30, 2012

I have a problem where roughly 25% of the time I insert or remove a thumb drive, my cellphone, or an external hd, windows explorer restarts. This is mostly a problem for me because certain programs in my tray are not restored and I have no way to access them after that even though they are still running. Could you help me figure out why this is happening or how to access a program if it's tray icon disappears?I've got an HP Pavillion Elite HPE and I've noticed this occurring with all of my front facing USB Ports.

View 2 Replies View Related

Explorer Not Showing Drives

Apr 9, 2009

Can someone help me how to solve this problem?

F drive (label: Multimedia) and G drive (label: Download) doesn't show in Windows 7 explorer

And here's the Disk Management window

Anyone can help me with this?

I'm running on Windows7 Build 6801 32bit

View 6 Replies View Related

Can't See Mapped Drives In Explorer?

Feb 26, 2010

On my Win 7 system, I have mapped 4 drives to a XP system using the "net use" command. They are mapped correctly as p,q,s,t on the Windows 7 system. They show up in the "Power Desk" app which is a file manager utility program. The mapped drives work correctly in that program.However, they don't show up in explorer on the windows 7 system. All other drives are shown, but not the mapped drives. Also, if I bring up the file open dialog box from an app like notepad, they don't show up either.On another Win 7 system, I can map the drives exactly the same way and they do show up in explorer. It must be a setting that is different on the Win 7 system that does not work.

View 3 Replies View Related

Hide/Un-hide Button In Notification Area?

Aug 22, 2011

The hide/unhide arrows on my taskbar have disappeared and I can't figure out how to get them back. I went to properties and clicked on unhide inactive icons, but I still have the same 3 showing and none of my other ones.

View 1 Replies View Related

Network Drives Cause Explorer To Hang And Crash

Nov 3, 2009

Some observations:

- I have two QNAP NAS servers, which put the drives after 30 mins idle in sleep mode.

- Windows 7 network discovery sees the two NAS servers all the time.

- When you make drive mappings to shares on the NAS servers, (it seems) at random times Explorer hangs (goes into stall) when trying to browse/access files or directories. Only a reboot helps.

- I'm accessing the drives via regular SMB, no HomeGroup, no AD etc.

- When you map the drives initiallially it asks for a password. Storing that account info into the credentials manager doesn't help.

- I tried to open ports 137-139 and 445 in the firewall, but that doesn't help.

My theory is that Windows breaks by default the connection with the NAS after 15 mins of idling. That's standard behaviour. What puzzles me is that Visita didn't have this issue and Windows 7 has.

Do more people have issues with SMB shares ?

View 1 Replies View Related

Accessing Drives In Explorer Takes A Long Time

Feb 9, 2009

I'm not sure why this is happening, but if I attempt to open a drive in Windows Explorer, it takes a really long time (sometimes several minutes). It takes that long for the progress bar on the address bar to fill up. Does anyone know why this would be?

View 8 Replies View Related

Win 7 Not Showing "network" Attached Drives In Explorer

Feb 5, 2009

Let me explain. These are usb drives connected on a network usb hub. No issues with hub, software, sharing on the hub over network. The only small issue is that for example,clicking on my computer to show drives(which it works and shows them this way in preview task pane window), but on the left pane window where its the "folders" view, under my computer all i show is attached IDE/SATA and local usb attached drives.

This does not concern an issue as a mapped network drive as it is NOT setup as and not needed. Software for the hub controls all of that.

This was not an issue with xp.

[edit] Another issue with this is the right click send-to menu... shows local usb, and just shows 2 out of 4 currently connected usb network drives, all connected via the usb hub either directly plugged in, or plugged into to the network hub via another 4port usb regular hub, which by manufacturer's specs is possible and the device is allowed up to 16 connected devices to the network 4 port usb hub.

[edit #2] The above issue with the 2 of 4 drives seems to be related to NTFS and FAT32 as the 2 shown in the right click send to menu are the NTFS drives, not the FAT32.

[edit #3] Update: The drives that show in the navigation pane (left side) of explorer is the NTFS drives, not the FAT32, same with right click send to menu. Although they show up

View 3 Replies View Related

Auto-hide Taskbar Fails To Auto-hide?

Mar 4, 2012

I set the Taskbar tab (in Taskbar & Start menu Properties) to Auto-hide the Taskbar.When I select Apply, the taskbar dips and disappears for a second and then comes right back and stays there.

View 5 Replies View Related

Windows 7 Folders Are Empty?

Apr 20, 2011

I'm having a very strange issue after I did a boot time virus scan in Avast to remove a virus. Avast seems to have removed the virus just fine, however I can't get Windows to show directories or files any more.If I open Windows Explorer and go to C:Users it says the folder is empty. However if I right click and select properties, it calculates the folder as 10.8 GB. I can still log in fine and run software etc. This problem isn't just in the C:Users folder. My library directories show empty and I was immediately afraid I lost all of my pictures because searching for *.jpg on my system yields no results. However, I remembered the exact path to one of the file names and sure enough it opened the picture. For example when I enter the exact address in Windows Explorer:C:UsersMyUserNamePictures2011MyPic.jpg it opens.But if I list C:UsersMyUserNamePictures2011 it says "folder is empty". One more thing to mention is that I tried browsing files through the command prompt. Whenever I try to do a directory listing with the dir command I get the error: Volume in drive C has no label. Volume Serial Number is 2AEE-FDC8. File not found. However, I can still cd into existing directories that I know exist. I just can't list the directories or files. Unfortunately I upgraded to Windows 7 SP1 right after this happened because I thought it might fix the problem. Now I can't do a system restore to the point where my computer wasn't having this problem.

View 7 Replies View Related

Windows 7 Cannot Find Empty?

Jul 25, 2012

I am going GAGA with this message: Windows cannot find empty. My computer crashes and There is nothing I can Do.

View 2 Replies View Related

Hide Windows Updates Over And Over?

Nov 12, 2011

Why do you have to hide windows updates more than one time? Some times over and over till it gets it.

PS: And I don't aways even have the program installed in some MS office cases. One I needed to hide five times and that was the last one on the list.

View 4 Replies View Related

Hide Desktop In Windows 7?

Jan 31, 2012

is there a way of hiding desktop in windows 7. I have an application which runs automatically once the windows start. But the application takes a few seconds to start after windows. Windows Desktop will open during this period. is there any way i can hide the windows desktop on Start. I know windows desktop icons can be hidden.

View 1 Replies View Related

Device Manager Empty In Windows 7 64-bit

Apr 10, 2012

There was a typical long list until recently, and now they're all gone. I was looking for my scanner which isn't being recognised, although the printer (it's an all-in-one HP photosmart 8180) is recognised and will print. I've run driver updates, registry cleanups, and system restore but with no effect.

View 8 Replies View Related

Windows 7 Startup Folder Empty

Dec 27, 2011

My computer was hit a malware. I was able to clean/quarantine the malware, but my startup folder is empty.From the Windows logo start, I am able to see the folders in "All Programs". But all the folders are empty. These startup folders are also empty when I navigate to their locations in Window Explorer. My programs are still installed and I can start them from their installed locations. How do I rebuild the startup folder? The "AppData" and the "ProgramData" folders are visible. I'd rather not create shortcuts to all my installed programs one at a time

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved